From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH v8 07/15] net/e1000: use rte_eth_linkstatus helpers
Date: Thu, 25 Jan 2018 18:01:43 -0800 [thread overview]
Message-ID: <20180126020151.979-8-stephen@networkplumber.org> (raw)
In-Reply-To: <20180126020151.979-1-stephen@networkplumber.org>
Use new rte_eth_linkstatus_get/set API.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/e1000/em_ethdev.c | 70 +++--------------------------------------
drivers/net/e1000/igb_ethdev.c | 71 +++---------------------------------------
2 files changed, 10 insertions(+), 131 deletions(-)
diff --git a/drivers/net/e1000/em_ethdev.c b/drivers/net/e1000/em_ethdev.c
index 07ee25f84f09..3a53846e14b5 100644
--- a/drivers/net/e1000/em_ethdev.c
+++ b/drivers/net/e1000/em_ethdev.c
@@ -20,7 +20,6 @@
#include <rte_ethdev_pci.h>
#include <rte_memory.h>
#include <rte_eal.h>
-#include <rte_atomic.h>
#include <rte_malloc.h>
#include <rte_dev.h>
@@ -197,57 +196,6 @@ static const struct eth_dev_ops eth_em_ops = {
.txq_info_get = em_txq_info_get,
};
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-rte_em_dev_atomic_read_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = link;
- struct rte_eth_link *src = &(dev->data->dev_link);
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-rte_em_dev_atomic_write_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = &(dev->data->dev_link);
- struct rte_eth_link *src = link;
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
/**
* eth_em_dev_is_ich8 - Check for ICH8 device
@@ -802,7 +750,7 @@ eth_em_stop(struct rte_eth_dev *dev)
/* clear the recorded link status */
memset(&link, 0, sizeof(link));
- rte_em_dev_atomic_write_link_status(dev, &link);
+ rte_eth_linkstatus_set(dev, &link);
if (!rte_intr_allow_others(intr_handle))
/* resume to the default handler */
@@ -1160,7 +1108,7 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_eth_link link, old;
+ struct rte_eth_link link;
int link_check, count;
link_check = 0;
@@ -1195,8 +1143,6 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
rte_delay_ms(EM_LINK_UPDATE_CHECK_INTERVAL);
}
memset(&link, 0, sizeof(link));
- rte_em_dev_atomic_read_link_status(dev, &link);
- old = link;
/* Now we check if a transition has happened */
if (link_check && (link.link_status == ETH_LINK_DOWN)) {
@@ -1215,14 +1161,8 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
link.link_status = ETH_LINK_DOWN;
link.link_autoneg = ETH_LINK_FIXED;
}
- rte_em_dev_atomic_write_link_status(dev, &link);
-
- /* not changed */
- if (old.link_status == link.link_status)
- return -1;
- /* changed */
- return 0;
+ return rte_eth_linkstatus_set(dev, &link);
}
/*
@@ -1631,8 +1571,8 @@ eth_em_interrupt_action(struct rte_eth_dev *dev,
if (ret < 0)
return 0;
- memset(&link, 0, sizeof(link));
- rte_em_dev_atomic_read_link_status(dev, &link);
+ rte_eth_linkstatus_get(dev, &link);
+
if (link.link_status) {
PMD_INIT_LOG(INFO, " Port %d: Link Up - speed %u Mbps - %s",
dev->data->port_id, link.link_speed,
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index 53b8ffa45fda..5998febd54f5 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -20,7 +20,6 @@
#include <rte_ethdev_pci.h>
#include <rte_memory.h>
#include <rte_eal.h>
-#include <rte_atomic.h>
#include <rte_malloc.h>
#include <rte_dev.h>
@@ -522,57 +521,6 @@ static const struct rte_igb_xstats_name_off rte_igbvf_stats_strings[] = {
#define IGBVF_NB_XSTATS (sizeof(rte_igbvf_stats_strings) / \
sizeof(rte_igbvf_stats_strings[0]))
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-rte_igb_dev_atomic_read_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = link;
- struct rte_eth_link *src = &(dev->data->dev_link);
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-rte_igb_dev_atomic_write_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = &(dev->data->dev_link);
- struct rte_eth_link *src = link;
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
static inline void
igb_intr_enable(struct rte_eth_dev *dev)
@@ -1559,7 +1507,7 @@ eth_igb_stop(struct rte_eth_dev *dev)
/* clear the recorded link status */
memset(&link, 0, sizeof(link));
- rte_igb_dev_atomic_write_link_status(dev, &link);
+ rte_eth_linkstatus_set(dev, &link);
if (!rte_intr_allow_others(intr_handle))
/* resume to the default handler */
@@ -1635,7 +1583,7 @@ eth_igb_close(struct rte_eth_dev *dev)
}
memset(&link, 0, sizeof(link));
- rte_igb_dev_atomic_write_link_status(dev, &link);
+ rte_eth_linkstatus_set(dev, &link);
}
static int
@@ -2382,7 +2330,7 @@ eth_igb_link_update(struct rte_eth_dev *dev, int wait_to_complete)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_eth_link link, old;
+ struct rte_eth_link link;
int link_check, count;
link_check = 0;
@@ -2423,8 +2371,6 @@ eth_igb_link_update(struct rte_eth_dev *dev, int wait_to_complete)
rte_delay_ms(IGB_LINK_UPDATE_CHECK_INTERVAL);
}
memset(&link, 0, sizeof(link));
- rte_igb_dev_atomic_read_link_status(dev, &link);
- old = link;
/* Now we check if a transition has happened */
if (link_check) {
@@ -2443,14 +2389,8 @@ eth_igb_link_update(struct rte_eth_dev *dev, int wait_to_complete)
link.link_status = ETH_LINK_DOWN;
link.link_autoneg = ETH_LINK_FIXED;
}
- rte_igb_dev_atomic_write_link_status(dev, &link);
- /* not changed */
- if (old.link_status == link.link_status)
- return -1;
-
- /* changed */
- return 0;
+ return rte_eth_linkstatus_set(dev, &link);
}
/*
@@ -2887,8 +2827,7 @@ eth_igb_interrupt_action(struct rte_eth_dev *dev,
if (ret < 0)
return 0;
- memset(&link, 0, sizeof(link));
- rte_igb_dev_atomic_read_link_status(dev, &link);
+ rte_eth_linkstatus_get(dev, &link);
if (link.link_status) {
PMD_INIT_LOG(INFO,
" Port %d: Link Up - speed %u Mbps - %s",
--
2.15.1
next prev parent reply other threads:[~2018-01-26 2:02 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-26 2:01 [dpdk-dev] [PATCH v8 00/15] common linkstatus functions Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 01/15] eal: introduce atomic exchange operation Stephen Hemminger
2018-01-26 17:14 ` Thomas Monjalon
2018-01-26 17:24 ` Bruce Richardson
2018-01-26 21:54 ` Stephen Hemminger
2018-01-29 9:51 ` Bruce Richardson
2018-01-26 17:59 ` Ananyev, Konstantin
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 02/15] ethdev: add linkstatus get/set helper functions Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 03/15] net/virtio: use eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 04/15] net/vmxnet3: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 05/15] net/dpaa2: " Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 06/15] net/nfp: use rte_eth_linkstatus functions Stephen Hemminger
2018-01-26 2:01 ` Stephen Hemminger [this message]
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 08/15] net/ixgbe: " Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 09/15] net/sfc: use new " Stephen Hemminger
2018-01-26 6:31 ` Andrew Rybchenko
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 10/15] net/i40e: use " Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 11/15] net/liquidio: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 12/15] net/thunderx: " Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 13/15] net/szedata: use _rte_eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 14/15] net/octeontx: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-26 2:01 ` [dpdk-dev] [PATCH v8 15/15] net/enic: " Stephen Hemminger
2018-03-15 17:38 ` [dpdk-dev] [PATCH v8 00/15] common linkstatus functions Ferruh Yigit
2018-03-16 10:31 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180126020151.979-8-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).