[dpdk-dev] [PATCH] net/mlx5: add bluefield device ID

[dpdk-dev] [PATCH] net/mlx5: add bluefield device ID

[Shahaf Shuler]

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
 drivers/net/mlx5/mlx5.c | 4 ++++
 drivers/net/mlx5/mlx5.h | 1 +
 2 files changed, 5 insertions(+)

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 61cb93101..5345bc46f 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -1027,6 +1027,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {
 			       PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
 	},
 	{
+		RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+			       PCI_DEVICE_ID_MELLANOX_BLUEFIELD)
+	},
+	{
 		.vendor_id = 0
 	}
 };
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 3e2d96abc..1c9845503 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -49,6 +49,7 @@ enum {
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a,
+	PCI_DEVICE_ID_MELLANOX_BLUEFIELD = 0xa2d2,
 };
 
 struct mlx5_xstats_ctrl {
-- 
2.12.0

Re: [dpdk-dev] [PATCH] net/mlx5: add bluefield device ID

[Nélio Laranjeiro]

On Sun, Feb 25, 2018 at 09:20:49AM +0200, Shahaf Shuler wrote:
> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> ---
>  drivers/net/mlx5/mlx5.c | 4 ++++
>  drivers/net/mlx5/mlx5.h | 1 +
>  2 files changed, 5 insertions(+)
> 
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index 61cb93101..5345bc46f 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -1027,6 +1027,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {
>  			       PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
>  	},
>  	{
> +		RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
> +			       PCI_DEVICE_ID_MELLANOX_BLUEFIELD)
> +	},
> +	{
>  		.vendor_id = 0
>  	}
>  };
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> index 3e2d96abc..1c9845503 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -49,6 +49,7 @@ enum {
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018,
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019,
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a,
> +	PCI_DEVICE_ID_MELLANOX_BLUEFIELD = 0xa2d2,
>  };
>  
>  struct mlx5_xstats_ctrl {
> -- 
> 2.12.0

Please also update:

 - config/common_base
 - doc/guides/nics/mlx5.rst
 - doc/guides/rel_notes/release_18_05.rst

In the same commit, as it was done for
commit 528a9fbec6de ("net/mlx5: support ConnectX-5 devices")

Thanks,

-- 
Nélio Laranjeiro
6WIND

[dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID

[Shahaf Shuler]

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---

On v2:
 - Updated mlx5 docs to include Bluefield product.
 - PCI_DEVICE_ID_MELLANOX_BLUEFIELD -> PCI_DEVICE_ID_MELLANOX_CONNECTX5BF

---
 config/common_base       |  3 ++-
 doc/guides/nics/mlx5.rst | 58 ++++++++++++++++++++++++++----------------------
 drivers/net/mlx5/mlx5.c  |  4 ++++
 drivers/net/mlx5/mlx5.h  |  1 +
 4 files changed, 38 insertions(+), 28 deletions(-)

diff --git a/config/common_base b/config/common_base
index c4dba709d1..6b0d1cbbb7 100644
--- a/config/common_base
+++ b/config/common_base
@@ -295,7 +295,8 @@ CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
 
 #
-# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
+# (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index a7d5c90bcf..f4a127b8fd 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -6,9 +6,9 @@ MLX5 poll mode driver
 =====================
 
 The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
-for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** and **Mellanox
-ConnectX-5** families of 10/25/40/50/100 Gb/s adapters as well as their
-virtual functions (VF) in SR-IOV context.
+for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
+ConnectX-5** and **Mellanox Bluefield** families of 10/25/40/50/100 Gb/s
+adapters as well as their virtual functions (VF) in SR-IOV context.
 
 Information and documentation about these adapters can be found on the
 `Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
@@ -237,8 +237,8 @@ Run-time configuration
 
   Supported on:
 
-  - x86_64 with ConnectX-4, ConnectX-4 LX and ConnectX-5.
-  - POWER8 and ARMv8 with ConnectX-4 LX and ConnectX-5.
+  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield.
+  - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5 and Bluefield.
 
 - ``mprq_en`` parameter [int]
 
@@ -304,34 +304,35 @@ Run-time configuration
 
   This option should be used in combination with ``txq_inline`` above.
 
-  On ConnectX-4, ConnectX-4 LX and ConnectX-5 without Enhanced MPW:
+  On ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield without
+  Enhanced MPW:
 
         - Disabled by default.
         - In case ``txq_inline`` is set recommendation is 4.
 
-  On ConnectX-5 with Enhanced MPW:
+  On ConnectX-5 and Bluefield with Enhanced MPW:
 
         - Set to 8 by default.
 
 - ``txq_mpw_en`` parameter [int]
 
   A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and
-  enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the
-  TX burst function to pack up multiple packets in a single descriptor
-  session in order to save PCI bandwidth and improve performance at the
-  cost of a slightly higher CPU usage. When ``txq_inline`` is set along
-  with ``txq_mpw_en``, TX burst function tries to copy entire packet data
-  on to TX descriptor instead of including pointer of packet only if there
-  is enough room remained in the descriptor. ``txq_inline`` sets
-  per-descriptor space for either pointers or inlined packets. In addition,
-  Enhanced MPS supports hybrid mode - mixing inlined packets and pointers
-  in the same descriptor.
+  enhanced multi-packet send (Enhanced MPS) for ConnectX-5 and Bluefiled.
+  MPS allows the TX burst function to pack up multiple packets in a
+  single descriptor session in order to save PCI bandwidth and improve
+  performance at the cost of a slightly higher CPU usage. When
+  ``txq_inline`` is set along with ``txq_mpw_en``, TX burst function tries
+  to copy entire packet data on to TX descriptor instead of including
+  pointer of packet only if there is enough room remained in the
+  descriptor. ``txq_inline`` sets per-descriptor space for either pointers
+  or inlined packets. In addition, Enhanced MPS supports hybrid mode -
+  mixing inlined packets and pointers in the same descriptor.
 
   This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO,
   DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``.
   When those offloads are requested the MPS send function will not be used.
 
-  It is currently only supported on the ConnectX-4 Lx and ConnectX-5
+  It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield
   families of adapters. Enabled by default.
 
 - ``txq_mpw_hdr_dseg_en`` parameter [int]
@@ -352,14 +353,14 @@ Run-time configuration
 
 - ``tx_vec_en`` parameter [int]
 
-  A nonzero value enables Tx vector on ConnectX-5 only NIC if the number of
+  A nonzero value enables Tx vector on ConnectX-5 and Bluefield NICs if the number of
   global Tx queues on the port is lesser than MLX5_VPMD_MIN_TXQS.
 
   This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO,
   DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``.
   When those offloads are requested the MPS send function will not be used.
 
-  Enabled by default on ConnectX-5.
+  Enabled by default on ConnectX-5 and Bluefield.
 
 - ``rx_vec_en`` parameter [int]
 
@@ -422,8 +423,9 @@ DPDK and must be installed separately:
 
 - **libmlx5**
 
-  Low-level user space driver library for Mellanox ConnectX-4/ConnectX-5
-  devices, it is automatically loaded by libibverbs.
+  Low-level user space driver library for Mellanox
+  ConnectX-4/ConnectX-5/Bluefield devices, it is automatically loaded
+  by libibverbs.
 
   This library basically implements send/receive calls to the hardware
   queues.
@@ -437,15 +439,16 @@ DPDK and must be installed separately:
   Unlike most other PMDs, these modules must remain loaded and bound to
   their devices:
 
-  - mlx5_core: hardware driver managing Mellanox ConnectX-4/ConnectX-5
-    devices and related Ethernet kernel network devices.
+  - mlx5_core: hardware driver managing Mellanox
+    ConnectX-4/ConnectX-5/Bluefield devices and related Ethernet kernel
+    network devices.
   - mlx5_ib: InifiniBand device driver.
   - ib_uverbs: user space driver for Verbs (entry point for libibverbs).
 
 - **Firmware update**
 
-  Mellanox OFED releases include firmware updates for ConnectX-4/ConnectX-5
-  adapters.
+  Mellanox OFED releases include firmware updates for
+  ConnectX-4/ConnectX-5/Bluefield adapters.
 
   Because each release provides new features, these updates must be applied to
   match the kernel modules and libraries they come with.
@@ -482,6 +485,7 @@ Mellanox OFED
   - ConnectX-4 Lx: **14.21.1000** and above.
   - ConnectX-5: **16.21.1000** and above.
   - ConnectX-5 Ex: **16.21.1000** and above.
+  - Bluefield: **18.23.1000** and above.
 
 While these libraries and kernel modules are available on OpenFabrics
 Alliance's `website <https://www.openfabrics.org/>`__ and provided by package
@@ -699,7 +703,7 @@ Usage example
 -------------
 
 This section demonstrates how to launch **testpmd** with Mellanox
-ConnectX-4/ConnectX-5 devices managed by librte_pmd_mlx5.
+ConnectX-4/ConnectX-5/Bluefield devices managed by librte_pmd_mlx5.
 
 #. Load the kernel modules:
 
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 8aa91cc8ed..0ce45eb852 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -1248,6 +1248,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {
 			       PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
 	},
 	{
+		RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+			       PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
+	},
+	{
 		.vendor_id = 0
 	}
 };
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index c4c962b92d..a9c692555e 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -50,6 +50,7 @@ enum {
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a,
+	PCI_DEVICE_ID_MELLANOX_CONNECTX5BF = 0xa2d2,
 };
 
 LIST_HEAD(mlx5_dev_list, priv);
-- 
2.12.0

Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID

[Nélio Laranjeiro]

On Tue, May 15, 2018 at 09:12:50AM +0300, Shahaf Shuler wrote:
> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>

Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

> ---
> 
> On v2:
>  - Updated mlx5 docs to include Bluefield product.
>  - PCI_DEVICE_ID_MELLANOX_BLUEFIELD -> PCI_DEVICE_ID_MELLANOX_CONNECTX5BF
> 
> ---
>  config/common_base       |  3 ++-
>  doc/guides/nics/mlx5.rst | 58 ++++++++++++++++++++++++++----------------------
>  drivers/net/mlx5/mlx5.c  |  4 ++++
>  drivers/net/mlx5/mlx5.h  |  1 +
>  4 files changed, 38 insertions(+), 28 deletions(-)
> 
> diff --git a/config/common_base b/config/common_base
> index c4dba709d1..6b0d1cbbb7 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -295,7 +295,8 @@ CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
>  CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
>  
>  #
> -# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
> +# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
> +# (MLX5) PMD
>  #
>  CONFIG_RTE_LIBRTE_MLX5_PMD=n
>  CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
> index a7d5c90bcf..f4a127b8fd 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -6,9 +6,9 @@ MLX5 poll mode driver
>  =====================
>  
>  The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
> -for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** and **Mellanox
> -ConnectX-5** families of 10/25/40/50/100 Gb/s adapters as well as their
> -virtual functions (VF) in SR-IOV context.
> +for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox
> +ConnectX-5** and **Mellanox Bluefield** families of 10/25/40/50/100 Gb/s
> +adapters as well as their virtual functions (VF) in SR-IOV context.
>  
>  Information and documentation about these adapters can be found on the
>  `Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
> @@ -237,8 +237,8 @@ Run-time configuration
>  
>    Supported on:
>  
> -  - x86_64 with ConnectX-4, ConnectX-4 LX and ConnectX-5.
> -  - POWER8 and ARMv8 with ConnectX-4 LX and ConnectX-5.
> +  - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield.
> +  - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5 and Bluefield.
>  
>  - ``mprq_en`` parameter [int]
>  
> @@ -304,34 +304,35 @@ Run-time configuration
>  
>    This option should be used in combination with ``txq_inline`` above.
>  
> -  On ConnectX-4, ConnectX-4 LX and ConnectX-5 without Enhanced MPW:
> +  On ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield without
> +  Enhanced MPW:
>  
>          - Disabled by default.
>          - In case ``txq_inline`` is set recommendation is 4.
>  
> -  On ConnectX-5 with Enhanced MPW:
> +  On ConnectX-5 and Bluefield with Enhanced MPW:
>  
>          - Set to 8 by default.
>  
>  - ``txq_mpw_en`` parameter [int]
>  
>    A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and
> -  enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the
> -  TX burst function to pack up multiple packets in a single descriptor
> -  session in order to save PCI bandwidth and improve performance at the
> -  cost of a slightly higher CPU usage. When ``txq_inline`` is set along
> -  with ``txq_mpw_en``, TX burst function tries to copy entire packet data
> -  on to TX descriptor instead of including pointer of packet only if there
> -  is enough room remained in the descriptor. ``txq_inline`` sets
> -  per-descriptor space for either pointers or inlined packets. In addition,
> -  Enhanced MPS supports hybrid mode - mixing inlined packets and pointers
> -  in the same descriptor.
> +  enhanced multi-packet send (Enhanced MPS) for ConnectX-5 and Bluefiled.
> +  MPS allows the TX burst function to pack up multiple packets in a
> +  single descriptor session in order to save PCI bandwidth and improve
> +  performance at the cost of a slightly higher CPU usage. When
> +  ``txq_inline`` is set along with ``txq_mpw_en``, TX burst function tries
> +  to copy entire packet data on to TX descriptor instead of including
> +  pointer of packet only if there is enough room remained in the
> +  descriptor. ``txq_inline`` sets per-descriptor space for either pointers
> +  or inlined packets. In addition, Enhanced MPS supports hybrid mode -
> +  mixing inlined packets and pointers in the same descriptor.
>  
>    This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO,
>    DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``.
>    When those offloads are requested the MPS send function will not be used.
>  
> -  It is currently only supported on the ConnectX-4 Lx and ConnectX-5
> +  It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield
>    families of adapters. Enabled by default.
>  
>  - ``txq_mpw_hdr_dseg_en`` parameter [int]
> @@ -352,14 +353,14 @@ Run-time configuration
>  
>  - ``tx_vec_en`` parameter [int]
>  
> -  A nonzero value enables Tx vector on ConnectX-5 only NIC if the number of
> +  A nonzero value enables Tx vector on ConnectX-5 and Bluefield NICs if the number of
>    global Tx queues on the port is lesser than MLX5_VPMD_MIN_TXQS.
>  
>    This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO,
>    DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``.
>    When those offloads are requested the MPS send function will not be used.
>  
> -  Enabled by default on ConnectX-5.
> +  Enabled by default on ConnectX-5 and Bluefield.
>  
>  - ``rx_vec_en`` parameter [int]
>  
> @@ -422,8 +423,9 @@ DPDK and must be installed separately:
>  
>  - **libmlx5**
>  
> -  Low-level user space driver library for Mellanox ConnectX-4/ConnectX-5
> -  devices, it is automatically loaded by libibverbs.
> +  Low-level user space driver library for Mellanox
> +  ConnectX-4/ConnectX-5/Bluefield devices, it is automatically loaded
> +  by libibverbs.
>  
>    This library basically implements send/receive calls to the hardware
>    queues.
> @@ -437,15 +439,16 @@ DPDK and must be installed separately:
>    Unlike most other PMDs, these modules must remain loaded and bound to
>    their devices:
>  
> -  - mlx5_core: hardware driver managing Mellanox ConnectX-4/ConnectX-5
> -    devices and related Ethernet kernel network devices.
> +  - mlx5_core: hardware driver managing Mellanox
> +    ConnectX-4/ConnectX-5/Bluefield devices and related Ethernet kernel
> +    network devices.
>    - mlx5_ib: InifiniBand device driver.
>    - ib_uverbs: user space driver for Verbs (entry point for libibverbs).
>  
>  - **Firmware update**
>  
> -  Mellanox OFED releases include firmware updates for ConnectX-4/ConnectX-5
> -  adapters.
> +  Mellanox OFED releases include firmware updates for
> +  ConnectX-4/ConnectX-5/Bluefield adapters.
>  
>    Because each release provides new features, these updates must be applied to
>    match the kernel modules and libraries they come with.
> @@ -482,6 +485,7 @@ Mellanox OFED
>    - ConnectX-4 Lx: **14.21.1000** and above.
>    - ConnectX-5: **16.21.1000** and above.
>    - ConnectX-5 Ex: **16.21.1000** and above.
> +  - Bluefield: **18.23.1000** and above.
>  
>  While these libraries and kernel modules are available on OpenFabrics
>  Alliance's `website <https://www.openfabrics.org/>`__ and provided by package
> @@ -699,7 +703,7 @@ Usage example
>  -------------
>  
>  This section demonstrates how to launch **testpmd** with Mellanox
> -ConnectX-4/ConnectX-5 devices managed by librte_pmd_mlx5.
> +ConnectX-4/ConnectX-5/Bluefield devices managed by librte_pmd_mlx5.
>  
>  #. Load the kernel modules:
>  
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index 8aa91cc8ed..0ce45eb852 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -1248,6 +1248,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {
>  			       PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
>  	},
>  	{
> +		RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
> +			       PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
> +	},
> +	{
>  		.vendor_id = 0
>  	}
>  };
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> index c4c962b92d..a9c692555e 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -50,6 +50,7 @@ enum {
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018,
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019,
>  	PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a,
> +	PCI_DEVICE_ID_MELLANOX_CONNECTX5BF = 0xa2d2,
>  };
>  
>  LIST_HEAD(mlx5_dev_list, priv);
> -- 
> 2.12.0
> 

-- 
Nélio Laranjeiro
6WIND

Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID

[Shahaf Shuler]

Tuesday, May 15, 2018 12:29 PM, Nélio Laranjeiro:
> Subject: Re: [PATCH v2] net/mlx5: add bluefield device ID
> 
> On Tue, May 15, 2018 at 09:12:50AM +0300, Shahaf Shuler wrote:
> > Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> 
> Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

Applied to next-net-mlx, thanks. 

Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID

[Ferruh Yigit]

On 5/15/2018 10:28 AM, Nélio Laranjeiro wrote:
> On Tue, May 15, 2018 at 09:12:50AM +0300, Shahaf Shuler wrote:
>> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> 
> Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>

Is web patch coming to introduce the device support in
https://dpdk.org/doc/nics?

Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID

[Shahaf Shuler]

Thursday, May 17, 2018 1:49 PM, Ferruh Yigit:
> Subject: Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID
> 
> On 5/15/2018 10:28 AM, Nélio Laranjeiro wrote:
> > On Tue, May 15, 2018 at 09:12:50AM +0300, Shahaf Shuler wrote:
> >> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> >
> > Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
> 
> Is web patch coming to introduce the device support in
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdp
> dk.org%2Fdoc%2Fnics&data=02%7C01%7Cshahafs%40mellanox.com%7Cb55
> 153d4e8ff4131d05608d5bbe3c08b%7Ca652971c7d2e4d9ba6a4d149256f461b%
> 7C0%7C0%7C636621509233305840&sdata=j3AVrlQByWOrWslubG1MJyBRhuf
> LuBYFjf9C1ExkQsw%3D&reserved=0?

Done
http://dpdk.org/ml/archives/web/2018-May/000725.html