From: Shreyansh Jain <shreyansh.jain@nxp.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, hemant.agrawal@nxp.com,
nipun.gupta@nxp.com, akhil.goyal@nxp.com,
Shreyansh Jain <shreyansh.jain@nxp.com>
Subject: [dpdk-dev] [PATCH v3 2/7] mempool/dpaa2: change to dynamic logging
Date: Fri, 23 Mar 2018 17:34:51 +0530 [thread overview]
Message-ID: <20180323120456.16920-3-shreyansh.jain@nxp.com> (raw)
In-Reply-To: <20180323120456.16920-1-shreyansh.jain@nxp.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
---
drivers/mempool/dpaa2/Makefile | 6 ---
drivers/mempool/dpaa2/dpaa2_hw_mempool.c | 60 +++++++++++++++++----------
drivers/mempool/dpaa2/dpaa2_hw_mempool_logs.h | 38 +++++++++++++++++
3 files changed, 75 insertions(+), 29 deletions(-)
create mode 100644 drivers/mempool/dpaa2/dpaa2_hw_mempool_logs.h
diff --git a/drivers/mempool/dpaa2/Makefile b/drivers/mempool/dpaa2/Makefile
index efaac96e7..f0edb32ce 100644
--- a/drivers/mempool/dpaa2/Makefile
+++ b/drivers/mempool/dpaa2/Makefile
@@ -9,14 +9,8 @@ include $(RTE_SDK)/mk/rte.vars.mk
#
LIB = librte_mempool_dpaa2.a
-ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
-CFLAGS += -O0 -g
-CFLAGS += "-Wno-error"
-else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
-endif
-
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
diff --git a/drivers/mempool/dpaa2/dpaa2_hw_mempool.c b/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
index 1a618ae1b..ce7a4c577 100644
--- a/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
+++ b/drivers/mempool/dpaa2/dpaa2_hw_mempool.c
@@ -27,10 +27,14 @@
#include <portal/dpaa2_hw_pvt.h>
#include <portal/dpaa2_hw_dpio.h>
#include "dpaa2_hw_mempool.h"
+#include "dpaa2_hw_mempool_logs.h"
struct dpaa2_bp_info rte_dpaa2_bpid_info[MAX_BPID];
static struct dpaa2_bp_list *h_bp_list;
+/* Dynamic logging identified for mempool */
+int dpaa2_logtype_mempool;
+
static int
rte_hw_mbuf_create_pool(struct rte_mempool *mp)
{
@@ -44,30 +48,30 @@ rte_hw_mbuf_create_pool(struct rte_mempool *mp)
avail_dpbp = dpaa2_alloc_dpbp_dev();
if (!avail_dpbp) {
- PMD_DRV_LOG(ERR, "DPAA2 resources not available");
+ DPAA2_MEMPOOL_ERR("DPAA2 pool not available!");
return -ENOENT;
}
if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
ret = dpaa2_affine_qbman_swp();
if (ret) {
- RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+ DPAA2_MEMPOOL_ERR("Failure in affining portal");
goto err1;
}
}
ret = dpbp_enable(&avail_dpbp->dpbp, CMD_PRI_LOW, avail_dpbp->token);
if (ret != 0) {
- PMD_INIT_LOG(ERR, "Resource enable failure with"
- " err code: %d\n", ret);
+ DPAA2_MEMPOOL_ERR("Resource enable failure with err code: %d",
+ ret);
goto err1;
}
ret = dpbp_get_attributes(&avail_dpbp->dpbp, CMD_PRI_LOW,
avail_dpbp->token, &dpbp_attr);
if (ret != 0) {
- PMD_INIT_LOG(ERR, "Resource read failure with"
- " err code: %d\n", ret);
+ DPAA2_MEMPOOL_ERR("Resource read failure with err code: %d",
+ ret);
goto err2;
}
@@ -75,7 +79,7 @@ rte_hw_mbuf_create_pool(struct rte_mempool *mp)
sizeof(struct dpaa2_bp_info),
RTE_CACHE_LINE_SIZE);
if (!bp_info) {
- PMD_INIT_LOG(ERR, "No heap memory available for bp_info");
+ DPAA2_MEMPOOL_ERR("Unable to allocate buffer pool memory");
ret = -ENOMEM;
goto err2;
}
@@ -84,7 +88,7 @@ rte_hw_mbuf_create_pool(struct rte_mempool *mp)
bp_list = rte_malloc(NULL, sizeof(struct dpaa2_bp_list),
RTE_CACHE_LINE_SIZE);
if (!bp_list) {
- PMD_INIT_LOG(ERR, "No heap memory available");
+ DPAA2_MEMPOOL_ERR("Unable to allocate buffer pool memory");
ret = -ENOMEM;
goto err3;
}
@@ -112,7 +116,7 @@ rte_hw_mbuf_create_pool(struct rte_mempool *mp)
sizeof(struct dpaa2_bp_info));
mp->pool_data = (void *)bp_info;
- PMD_INIT_LOG(DEBUG, "BP List created for bpid =%d", dpbp_attr.bpid);
+ DPAA2_MEMPOOL_DEBUG("BP List created for bpid =%d", dpbp_attr.bpid);
h_bp_list = bp_list;
return 0;
@@ -134,7 +138,7 @@ rte_hw_mbuf_free_pool(struct rte_mempool *mp)
struct dpaa2_dpbp_dev *dpbp_node;
if (!mp->pool_data) {
- PMD_DRV_LOG(ERR, "Not a valid dpaa22 pool");
+ DPAA2_MEMPOOL_ERR("Not a valid dpaa2 buffer pool");
return;
}
@@ -180,7 +184,7 @@ rte_dpaa2_mbuf_release(struct rte_mempool *pool __rte_unused,
if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
ret = dpaa2_affine_qbman_swp();
if (ret != 0) {
- RTE_LOG(ERR, PMD, "Failed to allocate IO portal\n");
+ DPAA2_MEMPOOL_ERR("Failed to allocate IO portal");
return;
}
}
@@ -250,7 +254,7 @@ rte_dpaa2_mbuf_alloc_bulk(struct rte_mempool *pool,
bp_info = mempool_to_bpinfo(pool);
if (!(bp_info->bp_list)) {
- RTE_LOG(ERR, PMD, "DPAA2 buffer pool not configured\n");
+ DPAA2_MEMPOOL_ERR("DPAA2 buffer pool not configured");
return -ENOENT;
}
@@ -259,7 +263,7 @@ rte_dpaa2_mbuf_alloc_bulk(struct rte_mempool *pool,
if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
ret = dpaa2_affine_qbman_swp();
if (ret != 0) {
- RTE_LOG(ERR, PMD, "Failed to allocate IO portal\n");
+ DPAA2_MEMPOOL_ERR("Failed to allocate IO portal");
return ret;
}
}
@@ -280,8 +284,8 @@ rte_dpaa2_mbuf_alloc_bulk(struct rte_mempool *pool,
* in pool, qbman_swp_acquire returns 0
*/
if (ret <= 0) {
- PMD_TX_LOG(ERR, "Buffer acquire failed with"
- " err code: %d", ret);
+ DPAA2_MEMPOOL_ERR("Buffer acquire failed with"
+ " err code: %d", ret);
/* The API expect the exact number of requested bufs */
/* Releasing all buffers allocated */
rte_dpaa2_mbuf_release(pool, obj_table, bpid,
@@ -293,7 +297,8 @@ rte_dpaa2_mbuf_alloc_bulk(struct rte_mempool *pool,
DPAA2_MODIFY_IOVA_TO_VADDR(bufs[i], size_t);
obj_table[n] = (struct rte_mbuf *)
(bufs[i] - bp_info->meta_data_size);
- PMD_TX_LOG(DEBUG, "Acquired %p address %p from BMAN",
+ DPAA2_MEMPOOL_DP_DEBUG(
+ "Acquired %p address %p from BMAN\n",
(void *)bufs[i], (void *)obj_table[n]);
n++;
}
@@ -301,8 +306,8 @@ rte_dpaa2_mbuf_alloc_bulk(struct rte_mempool *pool,
#ifdef RTE_LIBRTE_DPAA2_DEBUG_DRIVER
alloc += n;
- PMD_TX_LOG(DEBUG, "Total = %d , req = %d done = %d",
- alloc, count, n);
+ DPAA2_MEMPOOL_DP_DEBUG("Total = %d , req = %d done = %d\n",
+ alloc, count, n);
#endif
return 0;
}
@@ -315,7 +320,7 @@ rte_hw_mbuf_free_bulk(struct rte_mempool *pool,
bp_info = mempool_to_bpinfo(pool);
if (!(bp_info->bp_list)) {
- RTE_LOG(ERR, PMD, "DPAA2 buffer pool not configured\n");
+ DPAA2_MEMPOOL_ERR("DPAA2 buffer pool not configured");
return -ENOENT;
}
rte_dpaa2_mbuf_release(pool, obj_table, bp_info->bpid,
@@ -333,7 +338,7 @@ rte_hw_mbuf_get_count(const struct rte_mempool *mp)
struct dpaa2_dpbp_dev *dpbp_node;
if (!mp || !mp->pool_data) {
- RTE_LOG(ERR, PMD, "Invalid mempool provided\n");
+ DPAA2_MEMPOOL_ERR("Invalid mempool provided");
return 0;
}
@@ -343,12 +348,12 @@ rte_hw_mbuf_get_count(const struct rte_mempool *mp)
ret = dpbp_get_num_free_bufs(&dpbp_node->dpbp, CMD_PRI_LOW,
dpbp_node->token, &num_of_bufs);
if (ret) {
- RTE_LOG(ERR, PMD, "Unable to obtain free buf count (err=%d)\n",
- ret);
+ DPAA2_MEMPOOL_ERR("Unable to obtain free buf count (err=%d)",
+ ret);
return 0;
}
- RTE_LOG(DEBUG, PMD, "Free bufs = %u\n", num_of_bufs);
+ DPAA2_MEMPOOL_DP_DEBUG("Free bufs = %u\n", num_of_bufs);
return num_of_bufs;
}
@@ -363,3 +368,12 @@ struct rte_mempool_ops dpaa2_mpool_ops = {
};
MEMPOOL_REGISTER_OPS(dpaa2_mpool_ops);
+
+RTE_INIT(dpaa2_mempool_init_log);
+static void
+dpaa2_mempool_init_log(void)
+{
+ dpaa2_logtype_mempool = rte_log_register("mempool.dpaa2");
+ if (dpaa2_logtype_mempool >= 0)
+ rte_log_set_level(dpaa2_logtype_mempool, RTE_LOG_NOTICE);
+}
diff --git a/drivers/mempool/dpaa2/dpaa2_hw_mempool_logs.h b/drivers/mempool/dpaa2/dpaa2_hw_mempool_logs.h
new file mode 100644
index 000000000..c79b3d1cf
--- /dev/null
+++ b/drivers/mempool/dpaa2/dpaa2_hw_mempool_logs.h
@@ -0,0 +1,38 @@
+/*-
+ * SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2017 NXP
+ */
+
+#ifndef _DPAA2_HW_MEMPOOL_LOGS_H_
+#define _DPAA2_HW_MEMPOOL_LOGS_H_
+
+extern int dpaa2_logtype_mempool;
+
+#define DPAA2_MEMPOOL_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, dpaa2_logtype_mempool, \
+ "mempool/dpaa2: " fmt "\n", ##args)
+
+/* Debug logs are with Function names */
+#define DPAA2_MEMPOOL_DEBUG(fmt, args...) \
+ rte_log(RTE_LOG_DEBUG, dpaa2_logtype_mempool, \
+ "mempool/dpaa2: %s(): " fmt "\n", __func__, ##args)
+
+#define DPAA2_MEMPOOL_INFO(fmt, args...) \
+ DPAA2_MEMPOOL_LOG(INFO, fmt, ## args)
+#define DPAA2_MEMPOOL_ERR(fmt, args...) \
+ DPAA2_MEMPOOL_LOG(ERR, fmt, ## args)
+#define DPAA2_MEMPOOL_WARN(fmt, args...) \
+ DPAA2_MEMPOOL_LOG(WARNING, fmt, ## args)
+
+/* DP Logs, toggled out at compile time if level lower than current level */
+#define DPAA2_MEMPOOL_DP_LOG(level, fmt, args...) \
+ RTE_LOG_DP(level, PMD, fmt, ## args)
+
+#define DPAA2_MEMPOOL_DP_DEBUG(fmt, args...) \
+ DPAA2_MEMPOOL_DP_LOG(DEBUG, fmt, ## args)
+#define DPAA2_MEMPOOL_DP_INFO(fmt, args...) \
+ DPAA2_MEMPOOL_DP_LOG(INFO, fmt, ## args)
+#define DPAA2_MEMPOOL_DP_WARN(fmt, args...) \
+ DPAA2_MEMPOOL_DP_LOG(WARNING, fmt, ## args)
+
+#endif /* _DPAA2_HW_MEMPOOL_LOGS_H_ */
--
2.14.1
next prev parent reply other threads:[~2018-03-23 11:50 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-12 9:25 [dpdk-dev] [PATCH 0/7] Change DPAA2 " Shreyansh Jain
2018-03-12 9:25 ` [dpdk-dev] [PATCH 1/7] bus/fslmc: change " Shreyansh Jain
2018-03-12 9:25 ` [dpdk-dev] [PATCH 2/7] mempool/dpaa2: " Shreyansh Jain
2018-03-12 9:25 ` [dpdk-dev] [PATCH 3/7] net/dpaa2: change into " Shreyansh Jain
2018-03-12 11:04 ` Ferruh Yigit
2018-03-12 12:01 ` Shreyansh Jain
2018-03-12 9:25 ` [dpdk-dev] [PATCH 4/7] event/dpaa2: change to " Shreyansh Jain
2018-03-12 9:25 ` [dpdk-dev] [PATCH 5/7] bus/fslmc: remove unused debug macros Shreyansh Jain
2018-03-12 9:25 ` [dpdk-dev] [PATCH 6/7] crypto/dpaa2_sec: fix incorrect debugging prints Shreyansh Jain
2018-03-12 9:25 ` [dpdk-dev] [PATCH 7/7] crypto/dpaa2_sec: change to dynamic logging Shreyansh Jain
2018-03-12 12:10 ` [dpdk-dev] [PATCH 0/7] Change DPAA2 " Hemant Agrawal
2018-03-12 12:37 ` Shreyansh Jain
2018-03-13 5:44 ` [dpdk-dev] [RESEND v2 " Shreyansh Jain
2018-03-13 5:44 ` [dpdk-dev] [RESEND v2 1/7] bus/fslmc: change " Shreyansh Jain
2018-03-21 6:24 ` Hemant Agrawal
2018-03-13 5:44 ` [dpdk-dev] [RESEND v2 2/7] mempool/dpaa2: " Shreyansh Jain
2018-03-21 6:27 ` Hemant Agrawal
2018-03-13 5:44 ` [dpdk-dev] [RESEND v2 3/7] net/dpaa2: change into " Shreyansh Jain
2018-03-21 6:31 ` Hemant Agrawal
2018-03-23 7:19 ` Shreyansh Jain
2018-03-13 5:44 ` [dpdk-dev] [RESEND v2 4/7] event/dpaa2: change to " Shreyansh Jain
2018-03-14 4:01 ` Nipun Gupta
2018-03-13 5:44 ` [dpdk-dev] [RESEND v2 5/7] bus/fslmc: remove unused debug macros Shreyansh Jain
2018-03-21 6:13 ` Hemant Agrawal
2018-03-13 5:44 ` [dpdk-dev] [RESEND v2 6/7] crypto/dpaa2_sec: fix incorrect debugging prints Shreyansh Jain
2018-03-21 6:12 ` Hemant Agrawal
2018-03-13 5:44 ` [dpdk-dev] [RESEND v2 7/7] crypto/dpaa2_sec: change to dynamic logging Shreyansh Jain
2018-03-21 6:18 ` Hemant Agrawal
2018-03-23 12:04 ` [dpdk-dev] [PATCH v3 0/7] Change DPAA2 " Shreyansh Jain
2018-03-23 12:04 ` [dpdk-dev] [PATCH v3 1/7] bus/fslmc: change " Shreyansh Jain
2018-03-23 12:04 ` Shreyansh Jain [this message]
2018-03-26 8:48 ` [dpdk-dev] [PATCH v3 2/7] mempool/dpaa2: " Hemant Agrawal
2018-03-23 12:04 ` [dpdk-dev] [PATCH v3 3/7] net/dpaa2: change into " Shreyansh Jain
2018-03-26 8:48 ` Hemant Agrawal
2018-03-29 15:26 ` Thomas Monjalon
2018-03-29 18:01 ` Shreyansh Jain
2018-03-23 12:04 ` [dpdk-dev] [PATCH v3 4/7] event/dpaa2: change to " Shreyansh Jain
2018-03-23 12:04 ` [dpdk-dev] [PATCH v3 5/7] bus/fslmc: remove unused debug macros Shreyansh Jain
2018-03-23 12:04 ` [dpdk-dev] [PATCH v3 6/7] crypto/dpaa2_sec: fix incorrect debugging prints Shreyansh Jain
2018-03-23 12:04 ` [dpdk-dev] [PATCH v3 7/7] crypto/dpaa2_sec: change to dynamic logging Shreyansh Jain
2018-04-02 14:05 ` [dpdk-dev] [PATCH v4 0/7] Change DPAA2 " Shreyansh Jain
2018-04-02 14:05 ` [dpdk-dev] [PATCH v4 1/7] bus/fslmc: change " Shreyansh Jain
2019-12-03 15:35 ` Ferruh Yigit
2018-04-02 14:05 ` [dpdk-dev] [PATCH v4 2/7] mempool/dpaa2: " Shreyansh Jain
2018-04-02 14:05 ` [dpdk-dev] [PATCH v4 3/7] net/dpaa2: change into " Shreyansh Jain
2018-04-02 14:05 ` [dpdk-dev] [PATCH v4 4/7] event/dpaa2: change to " Shreyansh Jain
2018-04-02 14:05 ` [dpdk-dev] [PATCH v4 5/7] bus/fslmc: remove unused debug macros Shreyansh Jain
2018-04-02 14:06 ` [dpdk-dev] [PATCH v4 6/7] crypto/dpaa2_sec: fix incorrect debugging prints Shreyansh Jain
2018-04-02 14:06 ` [dpdk-dev] [PATCH v4 7/7] crypto/dpaa2_sec: change to dynamic logging Shreyansh Jain
2018-04-02 22:03 ` [dpdk-dev] [PATCH v4 0/7] Change DPAA2 " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180323120456.16920-3-shreyansh.jain@nxp.com \
--to=shreyansh.jain@nxp.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=nipun.gupta@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).