DPDK patches and discussions
 help / color / mirror / Atom feed
From: Xueming Li <xuemingl@mellanox.com>
To: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>,
	Shahaf Shuler <shahafs@mellanox.com>
Cc: Xueming Li <xuemingl@mellanox.com>, dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 01/15] net/mlx5: support 16 hardware priorities
Date: Tue, 10 Apr 2018 21:34:01 +0800	[thread overview]
Message-ID: <20180410133415.189905-2-xuemingl@mellanox.com> (raw)
In-Reply-To: <20180410133415.189905-1-xuemingl@mellanox.com>

Adjust flow priority mapping to adapt new hardware 16 verb flow
priorites support:
0-3: RTE FLOW tunnel rule
4-7: RTE FLOW non-tunnel rule
8-15: PMD control flow

Signed-off-by: Xueming Li <xuemingl@mellanox.com>
---
 drivers/net/mlx5/mlx5.c         |  10 ++++
 drivers/net/mlx5/mlx5.h         |   8 +++
 drivers/net/mlx5/mlx5_flow.c    | 107 ++++++++++++++++++++++++++++++----------
 drivers/net/mlx5/mlx5_trigger.c |   8 ---
 4 files changed, 100 insertions(+), 33 deletions(-)

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index cfab55897..a1f2799e5 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -197,6 +197,7 @@ mlx5_dev_close(struct rte_eth_dev *dev)
 		priv->txqs_n = 0;
 		priv->txqs = NULL;
 	}
+	mlx5_flow_delete_drop_queue(dev);
 	if (priv->pd != NULL) {
 		assert(priv->ctx != NULL);
 		claim_zero(mlx5_glue->dealloc_pd(priv->pd));
@@ -993,6 +994,15 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
 		mlx5_set_link_up(eth_dev);
 		/* Store device configuration on private structure. */
 		priv->config = config;
+		/* Create drop queue. */
+		err = mlx5_flow_create_drop_queue(eth_dev);
+		if (err) {
+			DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
+				eth_dev->data->port_id, strerror(rte_errno));
+			goto port_error;
+		}
+		/* Supported flow priority number detection. */
+		mlx5_flow_priorities_detect(eth_dev);
 		continue;
 port_error:
 		if (priv)
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 63b24e6bb..708272f6d 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -89,6 +89,8 @@ struct mlx5_dev_config {
 	unsigned int rx_vec_en:1; /* Rx vector is enabled. */
 	unsigned int mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */
 	unsigned int vf_nl_en:1; /* Enable Netlink requests in VF mode. */
+	unsigned int flow_priority_shift; /* Non-tunnel flow priority shift. */
+	unsigned int control_flow_priority; /* Control flow priority. */
 	unsigned int tso_max_payload_sz; /* Maximum TCP payload for TSO. */
 	unsigned int ind_table_max_size; /* Maximum indirection table size. */
 	int txq_inline; /* Maximum packet size for inlining. */
@@ -105,6 +107,11 @@ enum mlx5_verbs_alloc_type {
 	MLX5_VERBS_ALLOC_TYPE_RX_QUEUE,
 };
 
+/* 8 Verbs priorities per flow. */
+#define MLX5_VERBS_FLOW_PRIO_8 8
+/* 4 Verbs priorities per flow. */
+#define MLX5_VERBS_FLOW_PRIO_4 4
+
 /**
  * Verbs allocator needs a context to know in the callback which kind of
  * resources it is allocating.
@@ -253,6 +260,7 @@ int mlx5_traffic_restart(struct rte_eth_dev *dev);
 
 /* mlx5_flow.c */
 
+void mlx5_flow_priorities_detect(struct rte_eth_dev *dev);
 int mlx5_flow_validate(struct rte_eth_dev *dev,
 		       const struct rte_flow_attr *attr,
 		       const struct rte_flow_item items[],
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 288610620..394760418 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -32,9 +32,6 @@
 #include "mlx5_prm.h"
 #include "mlx5_glue.h"
 
-/* Define minimal priority for control plane flows. */
-#define MLX5_CTRL_FLOW_PRIORITY 4
-
 /* Internet Protocol versions. */
 #define MLX5_IPV4 4
 #define MLX5_IPV6 6
@@ -129,7 +126,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
 				IBV_RX_HASH_SRC_PORT_TCP |
 				IBV_RX_HASH_DST_PORT_TCP),
 		.dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_TCP,
-		.flow_priority = 1,
+		.flow_priority = 0,
 		.ip_version = MLX5_IPV4,
 	},
 	[HASH_RXQ_UDPV4] = {
@@ -138,7 +135,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
 				IBV_RX_HASH_SRC_PORT_UDP |
 				IBV_RX_HASH_DST_PORT_UDP),
 		.dpdk_rss_hf = ETH_RSS_NONFRAG_IPV4_UDP,
-		.flow_priority = 1,
+		.flow_priority = 0,
 		.ip_version = MLX5_IPV4,
 	},
 	[HASH_RXQ_IPV4] = {
@@ -146,7 +143,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
 				IBV_RX_HASH_DST_IPV4),
 		.dpdk_rss_hf = (ETH_RSS_IPV4 |
 				ETH_RSS_FRAG_IPV4),
-		.flow_priority = 2,
+		.flow_priority = 1,
 		.ip_version = MLX5_IPV4,
 	},
 	[HASH_RXQ_TCPV6] = {
@@ -155,7 +152,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
 				IBV_RX_HASH_SRC_PORT_TCP |
 				IBV_RX_HASH_DST_PORT_TCP),
 		.dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_TCP,
-		.flow_priority = 1,
+		.flow_priority = 0,
 		.ip_version = MLX5_IPV6,
 	},
 	[HASH_RXQ_UDPV6] = {
@@ -164,7 +161,7 @@ const struct hash_rxq_init hash_rxq_init[] = {
 				IBV_RX_HASH_SRC_PORT_UDP |
 				IBV_RX_HASH_DST_PORT_UDP),
 		.dpdk_rss_hf = ETH_RSS_NONFRAG_IPV6_UDP,
-		.flow_priority = 1,
+		.flow_priority = 0,
 		.ip_version = MLX5_IPV6,
 	},
 	[HASH_RXQ_IPV6] = {
@@ -172,13 +169,13 @@ const struct hash_rxq_init hash_rxq_init[] = {
 				IBV_RX_HASH_DST_IPV6),
 		.dpdk_rss_hf = (ETH_RSS_IPV6 |
 				ETH_RSS_FRAG_IPV6),
-		.flow_priority = 2,
+		.flow_priority = 1,
 		.ip_version = MLX5_IPV6,
 	},
 	[HASH_RXQ_ETH] = {
 		.hash_fields = 0,
 		.dpdk_rss_hf = 0,
-		.flow_priority = 3,
+		.flow_priority = 2,
 	},
 };
 
@@ -536,6 +533,8 @@ mlx5_flow_item_validate(const struct rte_flow_item *item,
 /**
  * Extract attribute to the parser.
  *
+ * @param dev
+ *   Pointer to Ethernet device.
  * @param[in] attr
  *   Flow rule attributes.
  * @param[out] error
@@ -545,9 +544,12 @@ mlx5_flow_item_validate(const struct rte_flow_item *item,
  *   0 on success, a negative errno value otherwise and rte_errno is set.
  */
 static int
-mlx5_flow_convert_attributes(const struct rte_flow_attr *attr,
+mlx5_flow_convert_attributes(struct rte_eth_dev *dev,
+			     const struct rte_flow_attr *attr,
 			     struct rte_flow_error *error)
 {
+	struct priv *priv = dev->data->dev_private;
+
 	if (attr->group) {
 		rte_flow_error_set(error, ENOTSUP,
 				   RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
@@ -555,7 +557,7 @@ mlx5_flow_convert_attributes(const struct rte_flow_attr *attr,
 				   "groups are not supported");
 		return -rte_errno;
 	}
-	if (attr->priority && attr->priority != MLX5_CTRL_FLOW_PRIORITY) {
+	if (attr->priority > priv->config.control_flow_priority) {
 		rte_flow_error_set(error, ENOTSUP,
 				   RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
 				   NULL,
@@ -900,30 +902,38 @@ mlx5_flow_convert_allocate(unsigned int size, struct rte_flow_error *error)
  * Make inner packet matching with an higher priority from the non Inner
  * matching.
  *
+ * @param dev
+ *   Pointer to Ethernet device.
  * @param[in, out] parser
  *   Internal parser structure.
  * @param attr
  *   User flow attribute.
  */
 static void
-mlx5_flow_update_priority(struct mlx5_flow_parse *parser,
+mlx5_flow_update_priority(struct rte_eth_dev *dev,
+			  struct mlx5_flow_parse *parser,
 			  const struct rte_flow_attr *attr)
 {
+	struct priv *priv = dev->data->dev_private;
 	unsigned int i;
+	uint16_t priority;
 
+	if (priv->config.flow_priority_shift == 1)
+		priority = attr->priority * MLX5_VERBS_FLOW_PRIO_4;
+	else
+		priority = attr->priority * MLX5_VERBS_FLOW_PRIO_8;
+	if (!parser->inner)
+		priority += priv->config.flow_priority_shift;
 	if (parser->drop) {
-		parser->queue[HASH_RXQ_ETH].ibv_attr->priority =
-			attr->priority +
-			hash_rxq_init[HASH_RXQ_ETH].flow_priority;
+		parser->queue[HASH_RXQ_ETH].ibv_attr->priority = priority +
+				hash_rxq_init[HASH_RXQ_ETH].flow_priority;
 		return;
 	}
 	for (i = 0; i != hash_rxq_init_n; ++i) {
-		if (parser->queue[i].ibv_attr) {
-			parser->queue[i].ibv_attr->priority =
-				attr->priority +
-				hash_rxq_init[i].flow_priority -
-				(parser->inner ? 1 : 0);
-		}
+		if (!parser->queue[i].ibv_attr)
+			continue;
+		parser->queue[i].ibv_attr->priority = priority +
+				hash_rxq_init[i].flow_priority;
 	}
 }
 
@@ -1087,7 +1097,7 @@ mlx5_flow_convert(struct rte_eth_dev *dev,
 		.layer = HASH_RXQ_ETH,
 		.mark_id = MLX5_FLOW_MARK_DEFAULT,
 	};
-	ret = mlx5_flow_convert_attributes(attr, error);
+	ret = mlx5_flow_convert_attributes(dev, attr, error);
 	if (ret)
 		return ret;
 	ret = mlx5_flow_convert_actions(dev, actions, error, parser);
@@ -1158,7 +1168,7 @@ mlx5_flow_convert(struct rte_eth_dev *dev,
 	 */
 	if (!parser->drop)
 		mlx5_flow_convert_finalise(parser);
-	mlx5_flow_update_priority(parser, attr);
+	mlx5_flow_update_priority(dev, parser, attr);
 exit_free:
 	/* Only verification is expected, all resources should be released. */
 	if (!parser->create) {
@@ -2450,7 +2460,7 @@ mlx5_ctrl_flow_vlan(struct rte_eth_dev *dev,
 	struct priv *priv = dev->data->dev_private;
 	const struct rte_flow_attr attr = {
 		.ingress = 1,
-		.priority = MLX5_CTRL_FLOW_PRIORITY,
+		.priority = priv->config.control_flow_priority,
 	};
 	struct rte_flow_item items[] = {
 		{
@@ -3161,3 +3171,50 @@ mlx5_dev_filter_ctrl(struct rte_eth_dev *dev,
 	}
 	return 0;
 }
+
+/**
+ * Detect number of Verbs flow priorities supported.
+ *
+ * @param dev
+ *   Pointer to Ethernet device.
+ */
+void
+mlx5_flow_priorities_detect(struct rte_eth_dev *dev)
+{
+	struct priv *priv = dev->data->dev_private;
+	uint32_t verb_priorities = MLX5_VERBS_FLOW_PRIO_8 * 2;
+	struct {
+		struct ibv_flow_attr attr;
+		struct ibv_flow_spec_eth eth;
+		struct ibv_flow_spec_action_drop drop;
+	} flow_attr = {
+		.attr = {
+			.num_of_specs = 2,
+			.priority = verb_priorities - 1,
+		},
+		.eth = {
+			.type = IBV_FLOW_SPEC_ETH,
+			.size = sizeof(struct ibv_flow_spec_eth),
+		},
+		.drop = {
+			.size = sizeof(struct ibv_flow_spec_action_drop),
+			.type = IBV_FLOW_SPEC_ACTION_DROP,
+		},
+	};
+	struct ibv_flow *flow;
+
+	if (priv->config.control_flow_priority)
+		return;
+	flow = mlx5_glue->create_flow(priv->flow_drop_queue->qp,
+				      &flow_attr.attr);
+	if (flow) {
+		priv->config.flow_priority_shift = MLX5_VERBS_FLOW_PRIO_8 / 2;
+		claim_zero(mlx5_glue->destroy_flow(flow));
+	} else {
+		priv->config.flow_priority_shift = 1;
+		verb_priorities = verb_priorities / 2;
+	}
+	priv->config.control_flow_priority = 1;
+	DRV_LOG(INFO, "port %u Verbs flow priorities: %d",
+		dev->data->port_id, verb_priorities);
+}
diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
index 6bb4ffb14..d80a2e688 100644
--- a/drivers/net/mlx5/mlx5_trigger.c
+++ b/drivers/net/mlx5/mlx5_trigger.c
@@ -148,12 +148,6 @@ mlx5_dev_start(struct rte_eth_dev *dev)
 	int ret;
 
 	dev->data->dev_started = 1;
-	ret = mlx5_flow_create_drop_queue(dev);
-	if (ret) {
-		DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
-			dev->data->port_id, strerror(rte_errno));
-		goto error;
-	}
 	DRV_LOG(DEBUG, "port %u allocating and configuring hash Rx queues",
 		dev->data->port_id);
 	rte_mempool_walk(mlx5_mp2mr_iter, priv);
@@ -202,7 +196,6 @@ mlx5_dev_start(struct rte_eth_dev *dev)
 	mlx5_traffic_disable(dev);
 	mlx5_txq_stop(dev);
 	mlx5_rxq_stop(dev);
-	mlx5_flow_delete_drop_queue(dev);
 	rte_errno = ret; /* Restore rte_errno. */
 	return -rte_errno;
 }
@@ -237,7 +230,6 @@ mlx5_dev_stop(struct rte_eth_dev *dev)
 	mlx5_rxq_stop(dev);
 	for (mr = LIST_FIRST(&priv->mr); mr; mr = LIST_FIRST(&priv->mr))
 		mlx5_mr_release(mr);
-	mlx5_flow_delete_drop_queue(dev);
 }
 
 /**
-- 
2.13.3

  reply	other threads:[~2018-04-10 13:34 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-10 13:34 [dpdk-dev] [PATCH v2 00/15] mlx5 Rx tunnel offloading Xueming Li
2018-04-10 13:34 ` Xueming Li [this message]
2018-04-10 14:41   ` [dpdk-dev] [PATCH v2 01/15] net/mlx5: support 16 hardware priorities Nélio Laranjeiro
2018-04-10 15:22     ` Xueming(Steven) Li
2018-04-12  9:09       ` Nélio Laranjeiro
2018-04-12 13:43         ` Xueming(Steven) Li
2018-04-12 14:02           ` Nélio Laranjeiro
2018-04-12 14:46             ` Xueming(Steven) Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 02/15] net/mlx5: support GRE tunnel flow Xueming Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 03/15] net/mlx5: support L3 vxlan flow Xueming Li
2018-04-10 14:53   ` Nélio Laranjeiro
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 04/15] net/mlx5: support Rx tunnel type identification Xueming Li
2018-04-10 15:17   ` Nélio Laranjeiro
2018-04-11  8:11     ` Xueming(Steven) Li
2018-04-12  9:50       ` Nélio Laranjeiro
2018-04-12 14:27         ` Xueming(Steven) Li
2018-04-13  8:37           ` Nélio Laranjeiro
2018-04-13 12:09             ` Xueming(Steven) Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 05/15] net/mlx5: support tunnel inner checksum offloads Xueming Li
2018-04-10 15:27   ` Nélio Laranjeiro
2018-04-11  8:46     ` Xueming(Steven) Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 06/15] net/mlx5: split flow RSS handling logic Xueming Li
2018-04-10 15:28   ` Nélio Laranjeiro
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 07/15] net/mlx5: support tunnel RSS level Xueming Li
2018-04-11  8:55   ` Nélio Laranjeiro
2018-04-14 12:25     ` Xueming(Steven) Li
2018-04-16  7:14       ` Nélio Laranjeiro
2018-04-16  7:46         ` Xueming(Steven) Li
2018-04-16  8:09           ` Nélio Laranjeiro
2018-04-16 10:06             ` Xueming(Steven) Li
2018-04-16 12:27               ` Nélio Laranjeiro
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 08/15] net/mlx5: add hardware flow debug dump Xueming Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 09/15] net/mlx5: introduce VXLAN-GPE tunnel type Xueming Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 10/15] net/mlx5: allow flow tunnel ID 0 with outer pattern Xueming Li
2018-04-11 12:25   ` Nélio Laranjeiro
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 11/15] net/mlx5: support MPLS-in-GRE and MPLS-in-UDP Xueming Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 12/15] doc: update mlx5 guide on tunnel offloading Xueming Li
2018-04-11 12:32   ` Nélio Laranjeiro
2018-04-11 12:43     ` Thomas Monjalon
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 13/15] net/mlx5: setup RSS flow regardless of queue count Xueming Li
2018-04-11 12:37   ` Nélio Laranjeiro
2018-04-11 13:01     ` Xueming(Steven) Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 14/15] net/mlx5: fix invalid flow item check Xueming Li
2018-04-10 13:34 ` [dpdk-dev] [PATCH v2 15/15] net/mlx5: support RSS configuration in isolated mode Xueming Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180410133415.189905-2-xuemingl@mellanox.com \
    --to=xuemingl@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=nelio.laranjeiro@6wind.com \
    --cc=shahafs@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).