From: Adrien Mazarguil <adrien.mazarguil@6wind.com>
To: Qi Zhang <qi.z.zhang@intel.com>
Cc: dev@dpdk.org, declan.doherty@intel.com,
sugesh.chandran@intel.com, michael.j.glynn@intel.com,
yu.y.liu@intel.com, konstantin.ananyev@intel.com,
bruce.richardson@intel.com
Subject: Re: [dpdk-dev] [PATCH v3 4/4] ethdev: add VLAN and MPLS pop push action in flow API
Date: Thu, 19 Apr 2018 16:49:02 +0200 [thread overview]
Message-ID: <20180419144902.GH4957@6wind.com> (raw)
In-Reply-To: <20180416061042.785-5-qi.z.zhang@intel.com>
On Mon, Apr 16, 2018 at 02:10:42PM +0800, Qi Zhang wrote:
> Add couple Openflow frienldy VLAN/MPLS push/pop actions.
Openflow => OpenFlow
frienldy => friendly
>
> RTE_FLOW_ACTION_VLAN_POP - pop a VLAN header.
> RTE_FLOW_ACTION_VLAN_PUSH - push a VLAN header.
> RTE_FLOW_ACTION_MPLS_POP - pop a MPLS header.
> RTE_FLOW_ACTION_MPLS_PUSH - push a MPLS header.
>
> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Same fundamental comment as for the previous patch ("ethdev: add TTL change
actions in flow API"), "OF" must be part of the name of these new actions,
e.g.:
RTE_FLOW_ACTION_OF_VLAN_POP
More below.
> ---
> app/test-pmd/cmdline_flow.c | 82 +++++++++++++++++++++++++++++
> doc/guides/prog_guide/rte_flow.rst | 69 ++++++++++++++++++++++++
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 14 +++++
> lib/librte_ether/rte_flow.h | 71 +++++++++++++++++++++++++
> 4 files changed, 236 insertions(+)
>
> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
> index 417cbecc9..736d79bef 100644
> --- a/app/test-pmd/cmdline_flow.c
> +++ b/app/test-pmd/cmdline_flow.c
> @@ -201,6 +201,13 @@ enum index {
> ACTION_IP_TTL_DEC_LVL,
> ACTION_TTL_COPY_OUT,
> ACTION_TTL_COPY_IN,
> + ACTION_VLAN_POP,
> + ACTION_VLAN_PUSH,
> + ACTION_VLAN_PUSH_TYPE,
> + ACTION_MPLS_POP,
> + ACTION_MPLS_POP_TYPE,
> + ACTION_MPLS_PUSH,
> + ACTION_MPLS_PUSH_TYPE,
> };
>
> /** Size of pattern[] field in struct rte_flow_item_raw. */
> @@ -678,6 +685,10 @@ static const enum index next_action[] = {
> ACTION_IP_TTL_DEC,
> ACTION_TTL_COPY_OUT,
> ACTION_TTL_COPY_IN,
> + ACTION_VLAN_POP,
> + ACTION_VLAN_PUSH,
> + ACTION_MPLS_POP,
> + ACTION_MPLS_PUSH,
> ZERO,
> };
>
> @@ -728,6 +739,21 @@ static const enum index action_ip_ttl_dec[] = {
> ZERO,
> };
>
> +static const enum index action_vlan_push[] = {
> + ACTION_VLAN_PUSH_TYPE,
> + ZERO,
> +};
> +
> +static const enum index action_mpls_pop[] = {
> + ACTION_MPLS_POP_TYPE,
> + ZERO,
> +};
> +
> +static const enum index action_mpls_push[] = {
> + ACTION_MPLS_PUSH_TYPE,
> + ZERO,
> +};
> +
> static int parse_init(struct context *, const struct token *,
> const char *, unsigned int,
> void *, unsigned int);
> @@ -1921,6 +1947,62 @@ static const struct token token_list[] = {
> .next = NEXT(NEXT_ENTRY(ACTION_NEXT)),
> .call = parse_vc,
> },
> +
> + [ACTION_VLAN_POP] = {
> + .name = "vlan_pop",
vlan_pop => of_vlan_pop
> + .help = "pop the outermost VLAN header.",
These help strings shouldn't be terminated with a "." for consistency.
> + .priv = PRIV_ACTION(DROP, 0),
DROP => OF_VLAN_POP
> + .next = NEXT(NEXT_ENTRY(ACTION_NEXT)),
> + .call = parse_vc,
> + },
> + [ACTION_VLAN_PUSH] = {
> + .name = "vlan_push",
vlan_push => of_vlan_push
> + .help = "push new VLAN header onto the packet",
> + .priv = PRIV_ACTION(VLAN_PUSH,
> + sizeof(struct rte_flow_action_vlan_push)),
> + .next = NEXT(action_vlan_push),
> + .call = parse_vc,
> + },
> + [ACTION_VLAN_PUSH_TYPE] = {
> + .name = "type",
> + .help = "Ethertype of VLAN header",
> + .next = NEXT(action_vlan_push, NEXT_ENTRY(UNSIGNED)),
Ethertype => EtherType (here and everywhere else, this is the official name
for that field)
> + .args = ARGS(ARGS_ENTRY(struct rte_flow_action_vlan_push,
> + ether_type)),
> + .call = parse_vc,
> + },
> + [ACTION_MPLS_POP] = {
> + .name = "mpls_pop",
mpls_pop => of_mpls_pop
> + .help = "pop the outermost MPLS header",
> + .priv = PRIV_ACTION(MPLS_POP,
> + sizeof(struct rte_flow_action_mpls_pop)),
> + .next = NEXT(action_mpls_pop),
> + .call = parse_vc,
> + },
> + [ACTION_MPLS_POP_TYPE] = {
> + .name = "type",
> + .help = "Ethertype of MPLS header",
> + .next = NEXT(action_mpls_pop, NEXT_ENTRY(UNSIGNED)),
> + .args = ARGS(ARGS_ENTRY(struct rte_flow_action_mpls_pop,
> + ether_type)),
> + .call = parse_vc,
> + },
> + [ACTION_MPLS_PUSH] = {
> + .name = "mpls_push",
mpls_push => of_mpls_push
> + .help = "push new MPLS header onto the packet",
> + .priv = PRIV_ACTION(MPLS_PUSH,
> + sizeof(struct rte_flow_action_mpls_push)),
> + .next = NEXT(action_mpls_push),
> + .call = parse_vc,
> + },
> + [ACTION_MPLS_PUSH_TYPE] = {
> + .name = "type",
> + .help = "Ethertype of MPLS header",
> + .next = NEXT(action_mpls_push, NEXT_ENTRY(UNSIGNED)),
> + .args = ARGS(ARGS_ENTRY(struct rte_flow_action_mpls_push,
> + ether_type)),
> + .call = parse_vc,
> + },
> };
>
> /** Remove and return last entry from argument stack. */
> diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
> index 65f2d4a16..a009f1aac 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -1684,6 +1684,75 @@ required MPLS or IP headers.
> | no properties |
> +---------------+
>
> +Action: ``ACTION_VLAN_POP``
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^
> +
> +Pop the outer-most VLAN header from the packet.
> +
> +.. _table_rte_flow_action_vlan_pop:
> +
> +.. table:: VLAN_POP
> +
> + +---------------+
> + | Field |
> + +===============+
> + | no properties |
> + +---------------+
Missing reference to OF specification etc.
> +
> +Action: ``ACTION_VLAN_PUSH``
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> +
> +Push a new VLAN header onto the packet, Ethertype 0x8100 or 0x88a8 should
> +be used. The value of VLAN ID and VLAN priority for the new header is copied
> +from an exist VLAN header in the packet, they will be set to 0 if no such
> +VLAN header exist.
> +
> +.. _table_rte_flow_action_vlan_push:
> +
> +.. table:: VLAN_PUSH
> +
> + +----------------+------------------------+
> + | Field | Value |
> + +================+========================+
> + | ``ether_type`` | Ethertype for VLAN tag |
> + +----------------+------------------------+
Beside the missing reference to OF specification, I think this patch should
also provide a "VLAN action change" action, otherwise what's the point of
pushing a VLAN header without the ability to pick a VID?
(see ofp_action_vlan_vid).
> +
> +Action: ``ACTION_MPLS_POP``
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^
> +
> +Pop the outer-most MPLS header from the packet, Ethertype is required for
> +the resulting packet if it is not the last MPLS header be popped, Ethertype
> +must be 0x8847 or 0x8848.
> +
> +.. _table_rte_flow_action_mpls_pop:
> +
> +.. table:: MPLS_POP
> +
> + +----------------+---------------------------+
> + | Field | Value |
> + +================+===========================+
> + | ``ether_type`` | Ethertype for MPLS header |
> + +----------------+---------------------------+
Name this field "ethertype" (without "_") like its OF counterpart.
> +
> +Action: ``ACTION_MPLS_PUSH``
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> +
> +Push a new MPLS header onto the packet, Ethertype 0x8847 or 0x8848 should
> +be used. The value of MPLS label and traffic class is copied from exist
> +outermost MPLS header, and TTL is copied from exist outermost MPLS or IP
> +header, they will be set to 0 if exist packet does not contain required
> +header.
> +
> +.. _table_rte_flow_action_mpls_push:
> +
> +.. table:: MPLS_PUSH
> +
> + +----------------+---------------------------+
> + | Field | Value |
> + +================+===========================+
> + | ``ether_type`` | Ethertype for MPLS header |
> + +----------------+---------------------------+
Ditto.
> +
> Negative types
> ~~~~~~~~~~~~~~
>
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index d2fe6637b..c06f2f0b0 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -3461,6 +3461,20 @@ This section lists supported actions and their attributes, if any.
>
> - ``ttl_copy_in``: copy TTL inwards.
>
> +- ``vlan_pop``: pop the outermost VLAN header.
> +
> +- ``vlan_push``: push new VLAN header onto the packet.
> +
> + - ``type``: Ethertype of the VLAN header.
> +
> +- ``mpls_pop``: pop the outermost MPLS header.
> +
> + - ``type``: Ethertype of the MPLS header.
> +
> +- ``mpls_push``: push new MPLS header onto the packet.
> +
> + - ``type``: Ethertype of the MPLS header.
> +
> Destroying flow rules
> ~~~~~~~~~~~~~~~~~~~~~
>
> diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
> index ab181cd83..c5b30363e 100644
> --- a/lib/librte_ether/rte_flow.h
> +++ b/lib/librte_ether/rte_flow.h
> @@ -1285,6 +1285,41 @@ enum rte_flow_action_type {
> * packets that contain required protocol headers.
> */
> RTE_FLOW_ACTION_TYPE_TTL_COPY_IN,
> +
> + /**
> + * Pop the outer-most VLAN header from the packet.
As for other actions without one, please add:
No associated configuration structure.
> + */
> + RTE_FLOW_ACTION_TYPE_VLAN_POP,
> +
> + /**
> + * Push a new VLAN header onto the packet, Ethertype 0x8100 or 0x88a8
> + * should be used. The value of VLAN ID and VLAN priority for the new
> + * header is copied from an exist VLAN header in the packet, they will
> + * be set to 0 if no such VLAN header exist.
> + *
> + * See struct rte_flow_action_vlan_push.
> + */
> + RTE_FLOW_ACTION_TYPE_VLAN_PUSH,
> +
> + /**
> + * Pop the outer-most MPLS header from the packet, Ethertype is
> + * required for the resulting packet if it is not the last MPLS
> + * header be popped, Ethertype must be 0x8847 or 0x8848.
> + *
> + * See struct rte_flow_action_mpls_pop.
> + */
> + RTE_FLOW_ACTION_TYPE_MPLS_POP,
> +
> + /**
> + * Push a new MPLS header onto the packet, Ethertype 0x8847 or 0x8848
> + * should be used. The value of MPLS label and traffic class is copied
> + * from exist outermost MPLS header, and TTL is copied from exist
> + * outermost MPLS or IP header, they will be set to 0 if exist packet
> + * does not contain required header.
> + *
> + * See struct rte_flow_action_mpls_push.
> + */
> + RTE_FLOW_ACTION_TYPE_MPLS_PUSH,
> };
>
> /**
> @@ -1501,6 +1536,42 @@ struct rte_flow_action_ip_ttl_dec {
> };
>
> /**
> + * RTE_FLOW_ACTION_TYPE_VLAN_PUSH,
> + *
> + * Push a new VLAN header onto the packet, Ethertype 0x8100 or 0x88a8
> + * should be used. The value of VLAN ID and VLAN priority for the new
> + * header is copied from an exist outermost VLAN header in the packet,
> + * they will be set to 0 if no such VLAN header exist.
> + */
> +struct rte_flow_action_vlan_push {
> + rte_be16_t ether_type; /**< Ethertype for vlan tag. */
> +};
> +
> +/**
> + * RTE_FLOW_ACTION_TYPE_MPLS_POP,
> + *
> + * Pop the outer-most MPLS header from the packet, Ethertype is
> + * required for the resulting packet if it is not the last MPLS
> + * header be popped, Ethertype must be 0x8847 or 0x8848.
> + */
> +struct rte_flow_action_mpls_pop {
> + rte_be16_t ether_type; /**< Ethertype for MPLS header */
> +};
> +
> +/**
> + * RTE_FLOW_ACTION_TYPE_MPLS_PUSH,
> + *
> + * Push a new MPLS header onto the packet, Ethertype 0x8847 or 0x8848
> + * should be used. The value of MPLS label and traffic class are copied
> + * from exist outermost MPLS header, and TTL is copied from exist outermost
> + * MPLS or IP header, they will be set to 0, if exist packet does not
> + * contain required header.
> + */
> +struct rte_flow_action_mpls_push {
> + rte_be16_t ether_type; /**< Ethertype for MPLS header */
> +};
> +
> +/**
> * Definition of a single action.
> *
> * A list of actions is terminated by a END action.
> --
> 2.13.6
>
--
Adrien Mazarguil
6WIND
next prev parent reply other threads:[~2018-04-19 14:49 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-28 23:29 [dpdk-dev] [PATCH 0/4] rte_flow extension for vSwitch acceleration Qi Zhang
2018-03-28 23:29 ` [dpdk-dev] [PATCH 1/4] ether: add flow action to redirect packet in a switch domain Qi Zhang
2018-03-29 10:48 ` Pattan, Reshma
2018-03-29 11:20 ` Pattan, Reshma
2018-03-28 23:29 ` [dpdk-dev] [PATCH 2/4] ether: add flow last hit query support Qi Zhang
2018-03-28 23:29 ` [dpdk-dev] [PATCH 3/4] ether: add more protocol support in flow API Qi Zhang
2018-03-29 14:32 ` Pattan, Reshma
2018-03-28 23:29 ` [dpdk-dev] [PATCH 4/4] ether: add packet modification aciton " Qi Zhang
2018-03-29 15:23 ` Pattan, Reshma
2018-04-02 3:35 ` Zhang, Qi Z
2018-04-01 21:19 ` [dpdk-dev] [PATCH v2 0/4] rte_flow extension for vSwitch acceleration Qi Zhang
2018-04-01 21:19 ` [dpdk-dev] [PATCH v2 1/4] ether: add flow action to redirect packet to a port Qi Zhang
2018-04-11 16:30 ` Adrien Mazarguil
2018-04-01 21:19 ` [dpdk-dev] [PATCH v2 2/4] ether: add flow last hit query support Qi Zhang
2018-04-11 16:31 ` Adrien Mazarguil
2018-04-01 21:19 ` [dpdk-dev] [PATCH v2 3/4] ether: add more protocol support in flow API Qi Zhang
2018-04-11 16:32 ` Adrien Mazarguil
2018-04-12 5:12 ` Zhang, Qi Z
2018-04-12 9:19 ` Adrien Mazarguil
2018-04-12 10:00 ` Zhang, Qi Z
2018-04-01 21:19 ` [dpdk-dev] [PATCH v2 4/4] ether: add packet modification aciton " Qi Zhang
2018-04-12 7:03 ` Adrien Mazarguil
2018-04-12 8:50 ` Zhang, Qi Z
2018-04-12 10:22 ` Adrien Mazarguil
2018-04-13 13:47 ` Zhang, Qi Z
2018-04-16 13:30 ` Adrien Mazarguil
2018-04-16 15:03 ` Zhang, Qi Z
2018-04-17 9:55 ` Adrien Mazarguil
2018-04-17 10:32 ` Zhang, Qi Z
2018-04-10 14:12 ` [dpdk-dev] [PATCH v2 0/4] rte_flow extension for vSwitch acceleration Thomas Monjalon
2018-04-16 5:16 ` [dpdk-dev] [PATCH v3 " Qi Zhang
2018-04-16 5:16 ` [dpdk-dev] [PATCH v3 1/4] ethdev: add more protocol support in flow API Qi Zhang
2018-04-16 5:16 ` [dpdk-dev] [PATCH v3 2/4] ethdev: add packet field set aciton " Qi Zhang
2018-04-16 5:16 ` [dpdk-dev] [PATCH v3 3/4] ethdev: add TTL change actions " Qi Zhang
2018-04-16 5:48 ` Shahaf Shuler
2018-04-16 8:12 ` Adrien Mazarguil
2018-04-16 8:56 ` Shahaf Shuler
2018-04-16 9:59 ` Adrien Mazarguil
2018-04-16 5:16 ` [dpdk-dev] [PATCH v3 4/4] ethdev: add VLAN and MPLS pop push action " Qi Zhang
2018-04-16 6:10 ` [dpdk-dev] [PATCH v3 0/4] rte_flow extension for vSwitch acceleration Qi Zhang
2018-04-16 6:10 ` [dpdk-dev] [PATCH v3 1/4] ethdev: add more protocol support in flow API Qi Zhang
2018-04-19 14:48 ` Adrien Mazarguil
2018-04-16 6:10 ` [dpdk-dev] [PATCH v3 2/4] ethdev: add packet field set aciton " Qi Zhang
2018-04-19 14:48 ` Adrien Mazarguil
2018-04-20 2:24 ` Zhang, Qi Z
2018-04-20 8:54 ` Adrien Mazarguil
2018-04-16 6:10 ` [dpdk-dev] [PATCH v3 3/4] ethdev: add TTL change actions " Qi Zhang
2018-04-19 14:48 ` Adrien Mazarguil
2018-04-16 6:10 ` [dpdk-dev] [PATCH v3 4/4] ethdev: add VLAN and MPLS pop push action " Qi Zhang
2018-04-17 7:34 ` Shahaf Shuler
2018-04-19 14:49 ` Adrien Mazarguil [this message]
2018-04-23 6:36 ` [dpdk-dev] [PATCH v4 0/3] rte_flow extension for vSwitch acceleration Qi Zhang
2018-04-23 6:36 ` [dpdk-dev] [PATCH v4 1/3] ethdev: add more protocol support in flow API Qi Zhang
2018-04-23 6:36 ` [dpdk-dev] [PATCH v4 2/3] ethdev: add TTL change actions " Qi Zhang
2018-04-23 6:36 ` [dpdk-dev] [PATCH v4 3/3] ethdev: add VLAN and MPLS " Qi Zhang
2018-04-24 15:58 ` [dpdk-dev] [PATCH v5 0/3] rte_flow extension for vSwitch acceleration Adrien Mazarguil
2018-04-24 15:58 ` [dpdk-dev] [PATCH v5 1/3] ethdev: add neighbor discovery support to flow API Adrien Mazarguil
2018-04-24 15:59 ` [dpdk-dev] [PATCH v5 2/3] ethdev: add TTL change actions " Adrien Mazarguil
2018-04-24 15:59 ` [dpdk-dev] [PATCH v5 3/3] ethdev: add VLAN and MPLS " Adrien Mazarguil
2018-04-25 13:54 ` [dpdk-dev] [PATCH v5 0/3] rte_flow extension for vSwitch acceleration Zhang, Qi Z
2018-04-25 22:44 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180419144902.GH4957@6wind.com \
--to=adrien.mazarguil@6wind.com \
--cc=bruce.richardson@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=michael.j.glynn@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=sugesh.chandran@intel.com \
--cc=yu.y.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).