From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: dev@dpdk.org
Cc: Scott Branden <scott.branden@broadcom.com>,
Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Subject: [dpdk-dev] [PATCH 02/12] net/bnxt: rename function checking MAC address
Date: Mon, 30 Apr 2018 18:06:06 -0700 [thread overview]
Message-ID: <20180501010616.40472-3-ajit.khaparde@broadcom.com> (raw)
In-Reply-To: <20180501010616.40472-1-ajit.khaparde@broadcom.com>
From: Scott Branden <scott.branden@broadcom.com>
rename check_zero_bytes to bnxt_check_zero_bytes to match proper prefix.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 2 +-
drivers/net/bnxt/bnxt_filter.c | 8 +++++---
drivers/net/bnxt/bnxt_filter.h | 2 +-
3 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 229017ace..3e2ccfa90 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -3286,7 +3286,7 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
goto error_free;
}
- if (check_zero_bytes(bp->dflt_mac_addr, ETHER_ADDR_LEN)) {
+ if (bnxt_check_zero_bytes(bp->dflt_mac_addr, ETHER_ADDR_LEN)) {
PMD_DRV_LOG(ERR,
"Invalid MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n",
bp->dflt_mac_addr[0], bp->dflt_mac_addr[1],
diff --git a/drivers/net/bnxt/bnxt_filter.c b/drivers/net/bnxt/bnxt_filter.c
index dadd1e32f..e36da9977 100644
--- a/drivers/net/bnxt/bnxt_filter.c
+++ b/drivers/net/bnxt/bnxt_filter.c
@@ -231,7 +231,7 @@ nxt_non_void_action(const struct rte_flow_action *cur)
}
}
-int check_zero_bytes(const uint8_t *bytes, int len)
+int bnxt_check_zero_bytes(const uint8_t *bytes, int len)
{
int i;
for (i = 0; i < len; i++)
@@ -512,13 +512,15 @@ bnxt_validate_and_parse_flow_type(struct bnxt *bp,
ipv6_spec->hdr.src_addr, 16);
rte_memcpy(filter->dst_ipaddr,
ipv6_spec->hdr.dst_addr, 16);
- if (!check_zero_bytes(ipv6_mask->hdr.src_addr, 16)) {
+ if (!bnxt_check_zero_bytes(ipv6_mask->hdr.src_addr,
+ 16)) {
rte_memcpy(filter->src_ipaddr_mask,
ipv6_mask->hdr.src_addr, 16);
en |= !use_ntuple ? 0 :
NTUPLE_FLTR_ALLOC_INPUT_EN_SRC_IPADDR_MASK;
}
- if (!check_zero_bytes(ipv6_mask->hdr.dst_addr, 16)) {
+ if (!bnxt_check_zero_bytes(ipv6_mask->hdr.dst_addr,
+ 16)) {
rte_memcpy(filter->dst_ipaddr_mask,
ipv6_mask->hdr.dst_addr, 16);
en |= !use_ntuple ? 0 :
diff --git a/drivers/net/bnxt/bnxt_filter.h b/drivers/net/bnxt/bnxt_filter.h
index c70b127ac..d27be7032 100644
--- a/drivers/net/bnxt/bnxt_filter.h
+++ b/drivers/net/bnxt/bnxt_filter.h
@@ -69,7 +69,7 @@ struct bnxt_filter_info *bnxt_get_unused_filter(struct bnxt *bp);
void bnxt_free_filter(struct bnxt *bp, struct bnxt_filter_info *filter);
struct bnxt_filter_info *bnxt_get_l2_filter(struct bnxt *bp,
struct bnxt_filter_info *nf, struct bnxt_vnic_info *vnic);
-int check_zero_bytes(const uint8_t *bytes, int len);
+int bnxt_check_zero_bytes(const uint8_t *bytes, int len);
#define NTUPLE_FLTR_ALLOC_INPUT_EN_SRC_MACADDR \
HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR
--
2.15.1 (Apple Git-101)
next prev parent reply other threads:[~2018-05-01 1:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-01 1:06 [dpdk-dev] [PATCH 00/12] bnxt patchset Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 01/12] net/bnxt: add support for lsc interrupt event Ajit Khaparde
2018-05-01 1:06 ` Ajit Khaparde [this message]
2018-05-01 1:06 ` [dpdk-dev] [PATCH 03/12] net/bnxt: rename driver version from Cumulus to NetXtreme Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 04/12] net/bnxt: return EINVAL instead of ENOSPC on invalid max ring Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 05/12] net/bnxt: Validate structs and pointers before use Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 06/12] net/bnxt: set MTU in dev config for jumbo packets Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 07/12] net/bnxt: fix MTU calculation Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 08/12] net/bnxt: return error if init is not complete before accessing stats Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 09/12] net/bnxt: fix to reset status of initialization Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 10/12] net/bnxt: fix rx mbuf and agg ring leak in dev stop Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 11/12] net/bnxt: fix usage of vnic id Ajit Khaparde
2018-05-01 1:06 ` [dpdk-dev] [PATCH 12/12] net/bnxt: clear HWRM sniffer list for PFs Ajit Khaparde
2018-05-08 16:30 ` [dpdk-dev] [PATCH 00/12] bnxt patchset Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180501010616.40472-3-ajit.khaparde@broadcom.com \
--to=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=scott.branden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).