Re: [dpdk-dev] [PATCH 2/2] doc: add a guide doc for cross compiling from x86

[Jerin Jacob <jerin.jacob@caviumnetworks.com>]

-----Original Message-----
> Date: Wed, 23 May 2018 23:38:47 -0400
> From: Gavin Hu <gavin.hu@arm.com>
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH 2/2] doc: add a guide doc for cross compiling
>  from x86
> X-Mailer: git-send-email 2.1.4
> 
> Signed-off-by: Gavin Hu <gavin.hu@arm.com>
> Reviewed-by: Steve Capper <Steve.Capper@arm.com>
> Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>

In addition to comments from Marko,

> ---
>  doc/cross_compiling_sdk.txt | 58 +++++++++++++++++++++++++++++++++++++++++++++

I think, instead of keeping it as a orphan document, IMO, it should linked with
https://dpdk.org/doc/guides/
I think, it can go a new section or "HowTo Guides" section, So that in future armv7 and/or PowerPC cross
compilation details can be added.


>  1 file changed, 58 insertions(+)
>  create mode 100644 doc/cross_compiling_sdk.txt
> 
> diff --git a/doc/cross_compiling_sdk.txt b/doc/cross_compiling_sdk.txt
> new file mode 100644
> index 0000000..aa08871
> --- /dev/null
> +++ b/doc/cross_compiling_sdk.txt
> @@ -0,0 +1,58 @@
> +How to cross compile DPDK for ARM64
> +-----------------------------------
> +
> +NOTE: Whilst it is recommended to natively build DPDK on ARM64 (just
> +like with x86), it is also possible to cross-build DPDK for ARM64.  An
> +ARM64 cross compile GNU toolchain is used for this, which currently requires
> +the NUMA libraries to be integrated. Following are the steps to follow.
> +
> +1. Obtain the cross tool chain
> +------------------------------
> +The latest cross compile tool chain can be downloaded from:
> +https://releases.linaro.org/components/toolchain/binaries/latest/aarch64-linux-gnu/
> +Following is the step to get the version 7.2.1, latest so far.
> +$ wget https://releases.linaro.org/components/toolchain/binaries/latest/
> +aarch64-linux-gnu/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu.tar.xz
> +
> +2. Unzip and add into the PATH
> +------------------------------
> +$ tar -xvf gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu.tar.xz
> +$ export PATH=$PATH:<install dir>/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu/bin
> +Note: For the host requirements and ohter info, refer to the release note section:
> +https://releases.linaro.org/components/toolchain/binaries/latest/
> +
> +3. Getting the prerequisite library
> +-----------------------------------
> +-- NUMA
> +--Prequisite: make sure the installed libtool version >= 2.2(run libtool --version to check),
> +otherwise the compilation will fail with errors.
> +$ git clone https://github.com/numactl/numactl.git
> +$ cd numactl
> +$ git checkout v2.0.11 -b v2.0.11
> +$ ./autogen.sh
> +$ autoconf -i
> +$ ./configure --host=x86_64 CC=aarch64-linux-gnu-gcc
> +$ make
> +
> +4. Install the numa header and lib
> +----------------------------------
> +Copy the header files to the cross compiler's include directory:
> +$ cp numa*.h <install dir>/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu/bin/../aarch64-linux-gnu/libc/usr/include/
> +Copy the numa lib to the cross compiler;s lib directory:
> +$ cp .libs/libnuma.a <install dir>/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu/lib/gcc/aarch64-linux-gnu/7.2.1/

Installing numactrl header files and library files to toolchain area
does not looks very correct. IMO, You can use --prefix option in
numactrl to install to separate directory and add the include details through
EXTRA_CFLAGS and EXTRA_LDFLAGS. This will help in meson for pkg-config
related case as well.

> +
> +5. Configuring the DPDK Build
> +-----------------------------
> +To configure a build, follow the build-sdk-quick.txt file to select the target
> +configuration.
> +$ make config T=arm64-armv8a-linuxapp-gcc

IMO, You can mentioned about other armv8 target such as
defconfig_arm64-dpaa2-linuxapp-gcc/defconfig_arm64-thunderx-linuxapp-gcc
for optimized build specific to target.

> +
> +6. Cross Compiling DPDK
> +-----------------------
> +To cross-compile DPDK for ARM64 target machine, without compiling the kernel modules, use the following
> +command:
> +$ make -j CROSS=aarch64-linux-gnu- CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_EAL_IGB_UIO=n

I think, you could mention to set CONFIG_RTE_LIBRTE_VHOST_NUMA=n and
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n for NON numa systems to avoid
building numactl for single node systems.

> +
> +To cross-compile DPDK for ARM64, including the kernel modules, the kernel source tree is required.
> +Set RTE_KERNEL_SRC_ROOTDIR to the kernel source tree folder and use the following command:
> +$ make -j CROSS=aarch64-linux-gnu- RTE_KERNELDIR=KERNEL_SRC_ROOTDIR CROSS_COMPILE=aarch64-linux-gnu-

You could add meson cross build details too.

export MESON_PARAMS='-Dwerror=true
-Dexamples=bond,bbdev_app,cmdline,distributor,eventdev_pipeline,exception_path,flow_classify,flow_filtering,helloworld,ip_fragmentation,ip_pipeline,ip_reassembly,ipsec-secgw,ipv4_multicast,kni,l2fwd,l2fwd-crypto,l2fwd-jobstats,l2fwd-keepalive,l3fwd,l3fwd-acl,l3fwd-power,l3fwd-vf,link_status_interrupt,load_balancer,packet_ordering,ptpclient,qos_meter,qos_sched,rxtx_callbacks,service_cores,skeleton,tep_termination,timer,vhost,vhost_scsi,vmdq,vmdq_dcb'

meson --default-library=static $MESON_PARAMS --cross-file config/arm/arm64_armv8_linuxapp_gcc arm64-static-build
ninja -C arm64-static-build

> -- 
> 2.1.4
>