From: Alex Kiselev <alex@therouter.net>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] net/bonding: add add/remove mac addrs
Date: Fri, 25 May 2018 19:21:45 +0300 [thread overview]
Message-ID: <20180525162145.MbVScBlR-NZhjwAkP5gwbWxOJKrQ4-A_qTJ_OuCq26Y@z> (raw)
add functions to add/remove MAC addresses
Signed-off-by: Alex Kiselev <alex@therouter.net>
---
drivers/net/bonding/rte_eth_bond_pmd.c | 76 +++++++++++++++++++++++++++++++---
1 file changed, 71 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index 02d94b1..835b4e3 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -25,6 +25,7 @@
#define REORDER_PERIOD_MS 10
#define DEFAULT_POLLING_INTERVAL_10_MS (10)
+#define BOND_MAX_MAC_ADDRS 16
#define HASH_L4_PORTS(h) ((h)->src_port ^ (h)->dst_port)
@@ -2219,7 +2220,7 @@ bond_ethdev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
uint16_t max_nb_rx_queues = UINT16_MAX;
uint16_t max_nb_tx_queues = UINT16_MAX;
- dev_info->max_mac_addrs = 1;
+ dev_info->max_mac_addrs = BOND_MAX_MAC_ADDRS;
dev_info->max_rx_pktlen = internals->candidate_max_rx_pktlen ?
internals->candidate_max_rx_pktlen :
@@ -2905,6 +2906,65 @@ bond_filter_ctrl(struct rte_eth_dev *dev __rte_unused,
return -ENOTSUP;
}
+static int
+bond_ethdev_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+ __rte_unused uint32_t index, uint32_t vmdq)
+{
+ struct rte_eth_dev *slave_eth_dev;
+ struct bond_dev_private *internals = dev->data->dev_private;
+ int ret, i;
+
+ rte_spinlock_lock(&internals->lock);
+
+ for (i = 0; i < internals->slave_count; i++) {
+ slave_eth_dev = &rte_eth_devices[internals->slaves[i].port_id];
+ if (*slave_eth_dev->dev_ops->mac_addr_add == NULL) {
+ ret = -ENOTSUP;
+ goto end;
+ }
+ }
+
+ for (i = 0; i < internals->slave_count; i++) {
+ ret = rte_eth_dev_mac_addr_add(internals->slaves[i].port_id, mac_addr,
+ vmdq);
+ if (ret < 0)
+ goto end;
+ }
+
+ ret = 0;
+end:
+ rte_spinlock_unlock(&internals->lock);
+ return ret;
+}
+
+static void
+bond_ethdev_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct rte_eth_dev *slave_eth_dev;
+ struct bond_dev_private *internals = dev->data->dev_private;
+ int ret, i;
+
+ rte_spinlock_lock(&internals->lock);
+
+ for (i = 0; i < internals->slave_count; i++) {
+ slave_eth_dev = &rte_eth_devices[internals->slaves[i].port_id];
+ if (*slave_eth_dev->dev_ops->mac_addr_remove == NULL)
+ goto end;
+ }
+
+ struct ether_addr *mac_addr = &dev->data->mac_addrs[index];
+
+ for (i = 0; i < internals->slave_count; i++) {
+ ret = rte_eth_dev_mac_addr_remove(internals->slaves[i].port_id,
+ mac_addr);
+ if (ret < 0)
+ goto end;
+ }
+
+end:
+ rte_spinlock_unlock(&internals->lock);
+}
+
const struct eth_dev_ops default_dev_ops = {
.dev_start = bond_ethdev_start,
.dev_stop = bond_ethdev_stop,
@@ -2927,7 +2987,9 @@ const struct eth_dev_ops default_dev_ops = {
.rss_hash_conf_get = bond_ethdev_rss_hash_conf_get,
.mtu_set = bond_ethdev_mtu_set,
.mac_addr_set = bond_ethdev_mac_address_set,
- .filter_ctrl = bond_filter_ctrl
+ .filter_ctrl = bond_filter_ctrl,
+ .mac_addr_add = bond_ethdev_mac_addr_add,
+ .mac_addr_remove = bond_ethdev_mac_addr_remove
};
static int
@@ -2954,10 +3016,14 @@ bond_alloc(struct rte_vdev_device *dev, uint8_t mode)
eth_dev->data->nb_rx_queues = (uint16_t)1;
eth_dev->data->nb_tx_queues = (uint16_t)1;
- eth_dev->data->mac_addrs = rte_zmalloc_socket(name, ETHER_ADDR_LEN, 0,
- socket_id);
+ /* Allocate memory for storing MAC addresses */
+ eth_dev->data->mac_addrs = rte_zmalloc_socket(name, ETHER_ADDR_LEN *
+ BOND_MAX_MAC_ADDRS, 0, socket_id);
if (eth_dev->data->mac_addrs == NULL) {
- RTE_BOND_LOG(ERR, "Unable to malloc mac_addrs");
+ RTE_BOND_LOG(ERR,
+ "Failed to allocate %u bytes needed to store "
+ "MAC addresses",
+ ETHER_ADDR_LEN * BOND_MAX_MAC_ADDRS);
goto err;
}
--
2.7.3
next reply other threads:[~2018-05-25 16:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 16:21 Alex Kiselev [this message]
[not found] <20180525164451.B3EF22C72@dpdk.org>
2018-06-04 13:23 ` Chas Williams
2018-06-06 11:52 Alex Kiselev
2018-06-06 15:36 ` Chas Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180525162145.MbVScBlR-NZhjwAkP5gwbWxOJKrQ4-A_qTJ_OuCq26Y@z \
--to=alex@therouter.net \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).