From: Yuanhan Liu <yliu@fridaylinux.org>
To: Raslan Darawsheh <rasland@mellanox.com>
Cc: dpdk stable <stable@dpdk.org>, "dev@dpdk.org" <dev@dpdk.org>,
Thomas Monjalon <thomas@monjalon.net>
Subject: Re: [dpdk-dev] 17.11.3 (LTS) patches review and test
Date: Fri, 8 Jun 2018 22:29:28 +0800 [thread overview]
Message-ID: <20180608141503.ndtgyooe4kxkdgie@yuanhanliu-NB0.tencent.com> (raw)
In-Reply-To: <DB5PR05MB125405E1844437E2FE4C4451C2640@DB5PR05MB1254.eurprd05.prod.outlook.com>
On Thu, Jun 07, 2018 at 11:09:56PM +0000, Raslan Darawsheh wrote:
> Hi,
>
> We've tested this version and we don't see new issues with it.
Hi Raslan,
Thank you a lot for the testing!
--yliu
>
> Kindest regards,
> Raslan Darawsheh
>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Yuanhan Liu
> Sent: Sunday, May 27, 2018 8:35 AM
> To: dpdk stable <stable@dpdk.org>
> Cc: dev@dpdk.org; Thomas Monjalon <thomas@monjalon.net>
> Subject: [dpdk-dev] 17.11.3 (LTS) patches review and test
>
> Hi all,
>
> Here is a list of patches targeted for LTS release 17.11.3. Please help review and test. The planned date for the final release is 8th, Jun. Before that, please let me know if anyone has objections with these patches being applied.
>
> These patches are located at branch 17.11 of dpdk-stable repo:
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdpdk.org%2Fbrowse%2Fdpdk-stable%2F&data=02%7C01%7Crasland%40mellanox.com%7Ce19869d187dc4afd691208d5c393b1e5%7Ca652971c7d2e4d9ba6a4d149256f461b%7C0%7C0%7C636629961495952407&sdata=Afb4An7wMdhwquNjwMvC3iJy%2FCICWS9nR4KHlpLPIqY%3D&reserved=0
>
> Thanks.
>
> --yliu
>
> ---
> Aaron Conole (2):
> nfp: unlink the appropriate lock file
> nfp: allow for non-root user
>
> Adrien Mazarguil (1):
> app/testpmd: fix empty list of RSS queues for flow
>
> Ajit Khaparde (9):
> net/bnxt: fix LRO disable
> net/bnxt: fix Rx drop setting
> net/bnxt: set padding flags in Rx descriptor
> net/bnxt: fix endianness of flag
> net/bnxt: fix Rx checksum flags for tunnel frames
> net/bnxt: free memory allocated for VF filters
> net/bnxt: avoid invalid vnic id in set L2 Rx mask
> net/bnxt: fix usage of vnic id
> net/bnxt: fix Rx checksum flags
>
> Alejandro Lucero (5):
> net/nfp: fix assigning port id in mbuf
> net/nfp: fix barrier location
> net/nfp: fix link speed capabilities
> doc: fix NFP NIC guide grammar
> net/nfp: fix mbufs releasing when stop or close
>
> Allain Legacy (1):
> ip_frag: fix double free of chained mbufs
>
> Anatoly Burakov (4):
> app/crypto-perf: fix IOVA translation
> mem: do not use physical addresses in IOVA as VA mode
> vfio: do not needlessly check for IOVA mode
> mempool: fix virtual address population
>
> Andrew Rybchenko (6):
> net/sfc: add missing defines for SAL annotation
> net/sfc: fix mbuf data alignment calculation
> net/sfc/base: fix comparison always true warning
> mempool: fix leak when no objects are populated
> test/mempool: fix autotest retry
> net/sfc: ignore spec bits not covered by mask
>
> Andy Green (3):
> net/bnx2x: do not cast function pointers as a policy
> net/bnx2x: fix KR2 device check
> net/bnx2x: fix memzone name overrun
>
> Ashish Jain (1):
> event/dpaa2: remove link from info structure
>
> Beilei Xing (3):
> net/i40e: fix DDP profile DEL operation
> net/i40e: fix link status update
> net/i40e: fix failing to disable FDIR Tx queue
>
> Bin Huang (1):
> net/mlx5: add packet type index for TCP ack
>
> Chas Williams (5):
> net/vmxnet3: set the queue shared buffer at start
> net/bonding: fix setting VLAN ID on slave ports
> net/bonding: clear started state if start fails
> net/ixgbe: fix busy wait during checking link status
> net/bonding: export mode 4 slave info routine
>
> Chuhong Yao (1):
> net/liquidio: fix link state fetching during start
>
> Ciara Loftus (1):
> net/vhost: initialise device as inactive
>
> Dan Gora (1):
> kni: fix build on CentOS 7.4
>
> Daniel Shelepov (1):
> app/testpmd: fix burst stats reporting
>
> David Hunt (4):
> mk: fix make defconfig on FreeBSD
> test/distributor: fix return type of thread function
> test/pipeline: fix return type of stub miss
> examples/performance-thread: fix return type of threads
>
> Fan Zhang (2):
> net/i40e: fix link update no wait
> crypto/scheduler: fix possible duplicated ring names
>
> Ferruh Yigit (4):
> pci: remove duplicated symbol from map file
> net/tap: fix icc build
> drivers/net: fix link autoneg value for virtual PMDs
> net/i40e: fix shifts of signed values
>
> Gaetan Rivet (2):
> bus/fslmc: fix find device start condition
> bus/pci: fix find device implementation
>
> Gowrishankar Muthukrishnan (2):
> eal/ppc: remove braces in SMP memory barrier macro
> net/bonding: fix primary slave port id storage type
>
> Harish Patil (1):
> net/qede: fix multicast filtering
>
> Hemant Agrawal (6):
> net/dpaa: fix oob access
> bus/dpaa: fix resource leak
> net/dpaa2: fix xstats
> app/crypto-perf: fix excess crypto device error
> examples/l2fwd-crypto: fix the default aead assignments
> crypto/dpaa2_sec: fix HMAC supported digest sizes
>
> Hyong Youb Kim (1):
> net/enic: allocate stats DMA buffer upfront during probe
>
> Ivan Malov (2):
> net/sfc: add missing Rx fini on RSS setup fail path
> net/sfc: process RSS settings on Rx configure step
>
> Jasvinder Singh (1):
> test/pipeline: fix type of table entry parameter
>
> Jerin Jacob (2):
> app/crypto-perf: use strcpy for allocated string
> app/crypto-perf: fix parameters copy
>
> John Daley (1):
> net/enic: fix crash on MTU update with non-setup queues
>
> Junjie Chen (2):
> net/vhost: fix crash when creating vdev dynamically
> net/vhost: fix invalid state
>
> Kirill Rybalchenko (2):
> crypto/scheduler: fix multicore rings re-use
> crypto/scheduler: fix 64-bit mask of workers cores
>
> Lee Roberts (1):
> kni: fix build on RHEL 7.5
>
> Matan Azrad (10):
> ethdev: fix port accessing after release
> app/testpmd: fix slave port detection
> app/testpmd: fix valid ports prints
> app/testpmd: fix forward ports update
> app/testpmd: fix forward ports Rx flush
> app/testpmd: fix synchronic port hotplug
> app/testpmd: fix removed device link status asking
> net/bonding: fix slave activation simultaneously
> net/failsafe: fix removed sub-device cleanup
> net/failsafe: fix duplicate event registration
>
> Matej Vido (2):
> net/szedata2: fix total stats
> net/szedata2: fix format string for PCI address
>
> Maxime Coquelin (1):
> vhost: fix compilation issue when vhost debug enabled
>
> Nachiketa Prachanda (1):
> bus/vdev: fix finding device by name
>
> Natalie Samsonov (1):
> net/mrvl: fix crash when port is closed without starting
>
> Nélio Laranjeiro (1):
> net/mlx5: fix flow creation with a single target queue
>
> Pablo de Lara (7):
> crypto/zuc: do not set default op status
> crypto/zuc: batch ops with same transform
> net/ixgbe: enable vector PMD for icc 32 bits
> crypto/scheduler: set null pointer after freeing
> crypto/scheduler: fix memory leak
> app/crypto-perf: check minimum lcore number
> cryptodev: fix supported size check
>
> Pascal Mazon (1):
> net/qede: fix alloc from socket 0
>
> Pavan Nikhilesh (1):
> hash: fix missing spinlock unlock in add key
>
> Phil Yang (1):
> test: fix memory flags test for low NUMA nodes number
>
> Qi Zhang (2):
> ethdev: fix queue start
> app/testpmd: fix command token
>
> Qiming Yang (1):
> net/ixgbe: fix DCB configuration
>
> Radu Nicolau (2):
> app/procinfo: fix strncpy usage in args parsing
> examples/exception_path: limit core count to 64
>
> Rasesh Mody (2):
> net/bnx2x: fix for PCI FLR after ungraceful exit
> net/qede: fix missing loop index in Tx SG mode
>
> Raslan Darawsheh (1):
> net/failsafe: fix probe cleanup
>
> Reshma Pattan (2):
> test/reorder: fix freeing mbuf twice
> examples/quota_watermark: fix return type of threads
>
> Roman Zhukov (1):
> net/sfc: fix type of opaque pointer in perf profile handler
>
> Santosh Shukla (2):
> net/octeontx: fix null pointer dereference
> net/octeontx: fix uninitialized variable in port open
>
> Shahed Shaikh (1):
> net/qede: fix unicast filter routine return code
>
> Stefan Hajnoczi (1):
> vhost: fix message payload union in setting ring address
>
> Stephen Hemminger (1):
> net/octeontx: fix uninitialized speed variable
>
> Thomas Monjalon (2):
> mbuf: fix Tx checksum offload API doc
> mbuf: improve tunnel Tx offloads API doc
>
> Tomasz Duszynski (1):
> net/mrvl: fix Rx descriptors number
>
> Tomasz Kulasek (5):
> vhost: fix offset while mmaping log base address
> vhost: check cmsg not null
> vhost: fix device cleanup at stop
> vhost: fix realloc failure
> vhost: fix ring index returned to master on stop
>
> Tonghao Zhang (2):
> net/bonding: free mempool used in mode 6
> vhost: fix dead lock on closing in server mode
>
> Wenzhuo Lu (1):
> net/ixgbe: fix too many interrupts
>
> Xiaoxin Peng (1):
> net/bnxt: fix Rx mbuf and agg ring leak in dev stop
>
> Xueming Li (1):
> net/mlx5: fix existing file removal
>
> Yongseok Koh (1):
> doc: add timestamp offload to mlx5 features
>
> Yunjian Wang (2):
> net/i40e: fix intr callback unregister by adding retry
> net/ixgbe: fix intr callback unregister by adding retry
next prev parent reply other threads:[~2018-06-08 14:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-27 5:35 Yuanhan Liu
2018-05-28 10:16 ` [dpdk-dev] [dpdk-stable] " Kevin Traynor
2018-06-07 23:09 ` [dpdk-dev] " Raslan Darawsheh
2018-06-08 14:29 ` Yuanhan Liu [this message]
2018-06-08 15:00 ` Bruce Richardson
2018-06-08 15:20 ` Yuanhan Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180608141503.ndtgyooe4kxkdgie@yuanhanliu-NB0.tencent.com \
--to=yliu@fridaylinux.org \
--cc=dev@dpdk.org \
--cc=rasland@mellanox.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).