[dpdk-dev] [PATCH v4 8/9] net/virtio: add in-order Rx/Tx into selection

[Marvin Liu <yong.liu@intel.com>]

After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
logic.

Rx path select logic: If IN_ORDER is disabled will select normal Rx
path. If IN_ORDER is enabled, Rx offload and merge-able are disabled
will select simple Rx path. Otherwise will select IN_ORDER Rx path.

Tx path select logic: If IN_ORDER is disabled will select normal Tx
path. If IN_ORDER is enabled and merge-able is disabled will select
simple Tx path. Otherwise will select IN_ORDER Tx path.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 46e292c4d..1b88cec96 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -201,7 +201,7 @@ The packet transmission flow is:
 Virtio PMD Rx/Tx Callbacks
 --------------------------
 
-Virtio driver has 3 Rx callbacks and 2 Tx callbacks.
+Virtio driver has 4 Rx callbacks and 3 Tx callbacks.
 
 Rx callbacks:
 
@@ -215,6 +215,9 @@ Rx callbacks:
    Vector version without mergeable Rx buffer support, also fixes the available
    ring indexes and uses vector instructions to optimize performance.
 
+#. ``virtio_recv_mergeable_pkts_inorder``:
+   In-order version with mergeable Rx buffer support.
+
 Tx callbacks:
 
 #. ``virtio_xmit_pkts``:
@@ -223,13 +226,17 @@ Tx callbacks:
 #. ``virtio_xmit_pkts_simple``:
    Vector version fixes the available ring indexes to optimize performance.
 
+#. ``virtio_xmit_pkts_inorder``:
+   In-order version.
 
-By default, the non-vector callbacks are used:
+By default, the in-order callbacks are used:
 
 *   For Rx: If mergeable Rx buffers is disabled then ``virtio_recv_pkts`` is
-    used; otherwise ``virtio_recv_mergeable_pkts``.
+    used; If in-order is enabled then ``virtio_recv_mergeable_pkts_inirder``;
+    otherwise ``virtio_recv_mergeable_pkts``.
 
-*   For Tx: ``virtio_xmit_pkts``.
+*   For Tx: If in-order is enabled then ``virtio_xmit_pkts_inorder``;
+    otherwise ``virtio_xmit_pkts``.
 
 
 Vector callbacks will be used when:
@@ -242,6 +249,8 @@ Vector callbacks will be used when:
 
 *   Mergeable Rx buffers is disabled.
 
+*   In-order is enabled
+
 The corresponding callbacks are:
 
 *   For Rx: ``virtio_recv_pkts_vec``.
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index df50a571a..5f5b72de3 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1320,6 +1320,11 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
 		PMD_INIT_LOG(INFO, "virtio: using simple Rx path on port %u",
 			eth_dev->data->port_id);
 		eth_dev->rx_pkt_burst = virtio_recv_pkts_vec;
+	} else if (hw->use_inorder_rx) {
+		PMD_INIT_LOG(INFO,
+			"virtio: using inorder mergeable buffer Rx path on port %u",
+			eth_dev->data->port_id);
+		eth_dev->rx_pkt_burst = &virtio_recv_mergeable_pkts_inorder;
 	} else if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
 		PMD_INIT_LOG(INFO,
 			"virtio: using mergeable buffer Rx path on port %u",
@@ -1335,6 +1340,10 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
 		PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
 			eth_dev->data->port_id);
 		eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
+	} else if (hw->use_inorder_tx) {
+		PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
+			eth_dev->data->port_id);
+		eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
 	} else {
 		PMD_INIT_LOG(INFO, "virtio: using standard Tx path on port %u",
 			eth_dev->data->port_id);
@@ -1871,8 +1880,18 @@ virtio_dev_configure(struct rte_eth_dev *dev)
 
 	rte_spinlock_init(&hw->state_lock);
 
-	hw->use_simple_rx = 1;
-	hw->use_simple_tx = 1;
+	if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
+		if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
+			hw->use_inorder_rx = 1;
+			hw->use_inorder_tx = 1;
+		} else {
+			hw->use_simple_rx = 1;
+			hw->use_simple_tx = 1;
+			if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
+					     DEV_RX_OFFLOAD_TCP_CKSUM))
+				hw->use_simple_rx = 0;
+		}
+	}
 
 #if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
 	if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
@@ -1880,14 +1899,6 @@ virtio_dev_configure(struct rte_eth_dev *dev)
 		hw->use_simple_tx = 0;
 	}
 #endif
-	if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
-		hw->use_simple_rx = 0;
-		hw->use_simple_tx = 0;
-	}
-
-	if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
-			   DEV_RX_OFFLOAD_TCP_CKSUM))
-		hw->use_simple_rx = 0;
 
 	return 0;
 }
-- 
2.17.0