From: Maxime Coquelin <maxime.coquelin@redhat.com>
To: tiwei.bie@intel.com, zhihong.wang@intel.com, dev@dpdk.org
Cc: yong.liu@intel.com, Maxime Coquelin <maxime.coquelin@redhat.com>
Subject: [dpdk-dev] [PATCH v4 1/4] net/virtio: remove simple Tx path
Date: Mon, 2 Jul 2018 17:25:44 +0200 [thread overview]
Message-ID: <20180702152547.31423-2-maxime.coquelin@redhat.com> (raw)
In-Reply-To: <20180702152547.31423-1-maxime.coquelin@redhat.com>
The simple Tx path does not comply with the Virtio specification.
Now that VIRTIO_F_IN_ORDER feature is supported by the Virtio PMD,
let's use this optimized path instead.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
drivers/net/virtio/virtio_ethdev.c | 11 +-----
drivers/net/virtio/virtio_pci.h | 1 -
drivers/net/virtio/virtio_rxtx.c | 28 +-------------
drivers/net/virtio/virtio_rxtx_simple.c | 67 ---------------------------------
drivers/net/virtio/virtio_rxtx_simple.h | 49 ------------------------
drivers/net/virtio/virtio_user_ethdev.c | 1 -
6 files changed, 2 insertions(+), 155 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 02980e3d1..73c428734 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1336,11 +1336,7 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
eth_dev->rx_pkt_burst = &virtio_recv_pkts;
}
- if (hw->use_simple_tx) {
- PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
- eth_dev->data->port_id);
- eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
- } else if (hw->use_inorder_tx) {
+ if (hw->use_inorder_tx) {
PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
eth_dev->data->port_id);
eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
@@ -1881,12 +1877,9 @@ virtio_dev_configure(struct rte_eth_dev *dev)
rte_spinlock_init(&hw->state_lock);
hw->use_simple_rx = 1;
- hw->use_simple_tx = 1;
if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
- /* Simple Tx not compatible with in-order ring */
hw->use_inorder_tx = 1;
- hw->use_simple_tx = 0;
if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
hw->use_inorder_rx = 1;
hw->use_simple_rx = 0;
@@ -1898,12 +1891,10 @@ virtio_dev_configure(struct rte_eth_dev *dev)
#if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
hw->use_simple_rx = 0;
- hw->use_simple_tx = 0;
}
#endif
if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
hw->use_simple_rx = 0;
- hw->use_simple_tx = 0;
}
if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 77f805df6..0ec216874 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -238,7 +238,6 @@ struct virtio_hw {
uint8_t use_msix;
uint8_t modern;
uint8_t use_simple_rx;
- uint8_t use_simple_tx;
uint8_t use_inorder_rx;
uint8_t use_inorder_tx;
uint16_t port_id;
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 6394071b8..522e5dd41 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -708,10 +708,6 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
PMD_INIT_FUNC_TRACE();
- /* cannot use simple rxtx funcs with multisegs or offloads */
- if (dev->data->dev_conf.txmode.offloads)
- hw->use_simple_tx = 0;
-
if (nb_desc == 0 || nb_desc > vq->vq_nentries)
nb_desc = vq->vq_nentries;
vq->vq_free_cnt = RTE_MIN(vq->vq_free_cnt, nb_desc);
@@ -746,33 +742,11 @@ virtio_dev_tx_queue_setup_finish(struct rte_eth_dev *dev,
uint8_t vtpci_queue_idx = 2 * queue_idx + VTNET_SQ_TQ_QUEUE_IDX;
struct virtio_hw *hw = dev->data->dev_private;
struct virtqueue *vq = hw->vqs[vtpci_queue_idx];
- uint16_t mid_idx = vq->vq_nentries >> 1;
- struct virtnet_tx *txvq = &vq->txq;
- uint16_t desc_idx;
PMD_INIT_FUNC_TRACE();
- if (hw->use_simple_tx) {
- for (desc_idx = 0; desc_idx < mid_idx; desc_idx++) {
- vq->vq_ring.avail->ring[desc_idx] =
- desc_idx + mid_idx;
- vq->vq_ring.desc[desc_idx + mid_idx].next =
- desc_idx;
- vq->vq_ring.desc[desc_idx + mid_idx].addr =
- txvq->virtio_net_hdr_mem +
- offsetof(struct virtio_tx_region, tx_hdr);
- vq->vq_ring.desc[desc_idx + mid_idx].len =
- vq->hw->vtnet_hdr_size;
- vq->vq_ring.desc[desc_idx + mid_idx].flags =
- VRING_DESC_F_NEXT;
- vq->vq_ring.desc[desc_idx].flags = 0;
- }
- for (desc_idx = mid_idx; desc_idx < vq->vq_nentries;
- desc_idx++)
- vq->vq_ring.avail->ring[desc_idx] = desc_idx;
- } else if (hw->use_inorder_tx) {
+ if (hw->use_inorder_tx)
vq->vq_ring.desc[vq->vq_nentries - 1].next = 0;
- }
VIRTQUEUE_DUMP(vq);
diff --git a/drivers/net/virtio/virtio_rxtx_simple.c b/drivers/net/virtio/virtio_rxtx_simple.c
index 515207581..31e565b4c 100644
--- a/drivers/net/virtio/virtio_rxtx_simple.c
+++ b/drivers/net/virtio/virtio_rxtx_simple.c
@@ -27,73 +27,6 @@
#pragma GCC diagnostic ignored "-Wcast-qual"
#endif
-uint16_t
-virtio_xmit_pkts_simple(void *tx_queue, struct rte_mbuf **tx_pkts,
- uint16_t nb_pkts)
-{
- struct virtnet_tx *txvq = tx_queue;
- struct virtqueue *vq = txvq->vq;
- struct virtio_hw *hw = vq->hw;
- uint16_t nb_used;
- uint16_t desc_idx;
- struct vring_desc *start_dp;
- uint16_t nb_tail, nb_commit;
- int i;
- uint16_t desc_idx_max = (vq->vq_nentries >> 1) - 1;
- uint16_t nb_tx = 0;
-
- if (unlikely(hw->started == 0 && tx_pkts != hw->inject_pkts))
- return nb_tx;
-
- nb_used = VIRTQUEUE_NUSED(vq);
- rte_compiler_barrier();
-
- if (nb_used >= VIRTIO_TX_FREE_THRESH)
- virtio_xmit_cleanup_simple(vq);
-
- nb_commit = nb_pkts = RTE_MIN((vq->vq_free_cnt >> 1), nb_pkts);
- desc_idx = (uint16_t)(vq->vq_avail_idx & desc_idx_max);
- start_dp = vq->vq_ring.desc;
- nb_tail = (uint16_t) (desc_idx_max + 1 - desc_idx);
-
- if (nb_commit >= nb_tail) {
- for (i = 0; i < nb_tail; i++)
- vq->vq_descx[desc_idx + i].cookie = tx_pkts[i];
- for (i = 0; i < nb_tail; i++) {
- start_dp[desc_idx].addr =
- VIRTIO_MBUF_DATA_DMA_ADDR(*tx_pkts, vq);
- start_dp[desc_idx].len = (*tx_pkts)->pkt_len;
- tx_pkts++;
- desc_idx++;
- }
- nb_commit -= nb_tail;
- desc_idx = 0;
- }
- for (i = 0; i < nb_commit; i++)
- vq->vq_descx[desc_idx + i].cookie = tx_pkts[i];
- for (i = 0; i < nb_commit; i++) {
- start_dp[desc_idx].addr =
- VIRTIO_MBUF_DATA_DMA_ADDR(*tx_pkts, vq);
- start_dp[desc_idx].len = (*tx_pkts)->pkt_len;
- tx_pkts++;
- desc_idx++;
- }
-
- rte_compiler_barrier();
-
- vq->vq_free_cnt -= (uint16_t)(nb_pkts << 1);
- vq->vq_avail_idx += nb_pkts;
- vq->vq_ring.avail->idx = vq->vq_avail_idx;
- txvq->stats.packets += nb_pkts;
-
- if (likely(nb_pkts)) {
- if (unlikely(virtqueue_kick_prepare(vq)))
- virtqueue_notify(vq);
- }
-
- return nb_pkts;
-}
-
int __attribute__((cold))
virtio_rxq_vec_setup(struct virtnet_rx *rxq)
{
diff --git a/drivers/net/virtio/virtio_rxtx_simple.h b/drivers/net/virtio/virtio_rxtx_simple.h
index 303904d64..dc97e4ccf 100644
--- a/drivers/net/virtio/virtio_rxtx_simple.h
+++ b/drivers/net/virtio/virtio_rxtx_simple.h
@@ -55,53 +55,4 @@ virtio_rxq_rearm_vec(struct virtnet_rx *rxvq)
vq_update_avail_idx(vq);
}
-#define VIRTIO_TX_FREE_THRESH 32
-#define VIRTIO_TX_MAX_FREE_BUF_SZ 32
-#define VIRTIO_TX_FREE_NR 32
-/* TODO: vq->tx_free_cnt could mean num of free slots so we could avoid shift */
-static inline void
-virtio_xmit_cleanup_simple(struct virtqueue *vq)
-{
- uint16_t i, desc_idx;
- uint32_t nb_free = 0;
- struct rte_mbuf *m, *free[VIRTIO_TX_MAX_FREE_BUF_SZ];
-
- desc_idx = (uint16_t)(vq->vq_used_cons_idx &
- ((vq->vq_nentries >> 1) - 1));
- m = (struct rte_mbuf *)vq->vq_descx[desc_idx++].cookie;
- m = rte_pktmbuf_prefree_seg(m);
- if (likely(m != NULL)) {
- free[0] = m;
- nb_free = 1;
- for (i = 1; i < VIRTIO_TX_FREE_NR; i++) {
- m = (struct rte_mbuf *)vq->vq_descx[desc_idx++].cookie;
- m = rte_pktmbuf_prefree_seg(m);
- if (likely(m != NULL)) {
- if (likely(m->pool == free[0]->pool))
- free[nb_free++] = m;
- else {
- rte_mempool_put_bulk(free[0]->pool,
- (void **)free,
- RTE_MIN(RTE_DIM(free),
- nb_free));
- free[0] = m;
- nb_free = 1;
- }
- }
- }
- rte_mempool_put_bulk(free[0]->pool, (void **)free,
- RTE_MIN(RTE_DIM(free), nb_free));
- } else {
- for (i = 1; i < VIRTIO_TX_FREE_NR; i++) {
- m = (struct rte_mbuf *)vq->vq_descx[desc_idx++].cookie;
- m = rte_pktmbuf_prefree_seg(m);
- if (m != NULL)
- rte_mempool_put(m->pool, m);
- }
- }
-
- vq->vq_used_cons_idx += VIRTIO_TX_FREE_NR;
- vq->vq_free_cnt += (VIRTIO_TX_FREE_NR << 1);
-}
-
#endif /* _VIRTIO_RXTX_SIMPLE_H_ */
diff --git a/drivers/net/virtio/virtio_user_ethdev.c b/drivers/net/virtio/virtio_user_ethdev.c
index fcd30251f..5ee59d5e5 100644
--- a/drivers/net/virtio/virtio_user_ethdev.c
+++ b/drivers/net/virtio/virtio_user_ethdev.c
@@ -436,7 +436,6 @@ virtio_user_eth_dev_alloc(struct rte_vdev_device *vdev)
hw->use_msix = 1;
hw->modern = 0;
hw->use_simple_rx = 0;
- hw->use_simple_tx = 0;
hw->use_inorder_rx = 0;
hw->use_inorder_tx = 0;
hw->virtio_user_dev = dev;
--
2.14.4
next prev parent reply other threads:[~2018-07-02 15:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-02 15:25 [dpdk-dev] [PATCH v4 0/4] net/virtio: Tx simple path removal and offload improvements Maxime Coquelin
2018-07-02 15:25 ` Maxime Coquelin [this message]
2018-07-02 15:25 ` [dpdk-dev] [PATCH v4 2/4] net/virtio: improve Tx offload features negotiation Maxime Coquelin
2018-07-02 15:25 ` [dpdk-dev] [PATCH v4 3/4] net/virtio: don't use simple Rx if TCP LRO or VLAN strip Maxime Coquelin
2018-07-02 15:25 ` [dpdk-dev] [PATCH v4 4/4] net/virtio: improve offload check performance Maxime Coquelin
2018-07-03 2:49 ` [dpdk-dev] [PATCH v4 0/4] net/virtio: Tx simple path removal and offload improvements Tiwei Bie
2018-07-04 5:17 ` Tiwei Bie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180702152547.31423-2-maxime.coquelin@redhat.com \
--to=maxime.coquelin@redhat.com \
--cc=dev@dpdk.org \
--cc=tiwei.bie@intel.com \
--cc=yong.liu@intel.com \
--cc=zhihong.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).