From: Thomas Monjalon <thomas@monjalon.net>
To: ferruh.yigit@intel.com, arybchenko@solarflare.com, shahafs@mellanox.com
Cc: dev@dpdk.org, ravi1.kumar@amd.com, rasesh.mody@cavium.com,
maxime.coquelin@redhat.com
Subject: [dpdk-dev] [PATCH v2 3/5] ethdev: convert remaining apps to new offload API
Date: Mon, 2 Jul 2018 23:27:48 +0200 [thread overview]
Message-ID: <20180702212750.16758-4-thomas@monjalon.net> (raw)
In-Reply-To: <20180702212750.16758-1-thomas@monjalon.net>
Some test applications and examples were not converted
to the new offload API introduced in 17.11.
For reference, see "Hardware Offload" in
doc/guides/prog_guide/poll_mode_drv.rst
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
app/test-eventdev/test_perf_common.c | 8 +----
.../sample_app_ug/l2_forward_job_stats.rst | 19 ------------
.../sample_app_ug/l2_forward_real_virtual.rst | 19 ------------
doc/guides/sample_app_ug/link_status_intr.rst | 5 +---
.../sample_app_ug/vmdq_dcb_forwarding.rst | 4 ---
examples/bbdev_app/main.c | 6 +---
examples/ip_pipeline/link.c | 11 +------
test/test-pipeline/init.c | 6 +---
test/test/test_kni.c | 6 +---
test/test/test_link_bonding.c | 13 ++-------
test/test/test_link_bonding_mode4.c | 6 +---
| 12 ++------
test/test/test_pmd_perf.c | 29 +++----------------
13 files changed, 15 insertions(+), 129 deletions(-)
diff --git a/app/test-eventdev/test_perf_common.c b/app/test-eventdev/test_perf_common.c
index d00f91802..eed80d1b1 100644
--- a/app/test-eventdev/test_perf_common.c
+++ b/app/test-eventdev/test_perf_common.c
@@ -680,13 +680,7 @@ perf_ethdev_setup(struct evt_test *test, struct evt_options *opt)
.mq_mode = ETH_MQ_RX_RSS,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0,
- .hw_ip_checksum = 0,
- .hw_vlan_filter = 0,
- .hw_vlan_strip = 0,
- .hw_vlan_extend = 0,
- .jumbo_frame = 0,
- .hw_strip_crc = 1,
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.rx_adv_conf = {
.rss_conf = {
diff --git a/doc/guides/sample_app_ug/l2_forward_job_stats.rst b/doc/guides/sample_app_ug/l2_forward_job_stats.rst
index d7219a293..ba73d8557 100644
--- a/doc/guides/sample_app_ug/l2_forward_job_stats.rst
+++ b/doc/guides/sample_app_ug/l2_forward_job_stats.rst
@@ -218,25 +218,6 @@ The rte_eth_dev_configure() function is used to configure the number of queues f
"err=%d, port=%u\n",
ret, portid);
-The global configuration is stored in a static structure:
-
-.. code-block:: c
-
- static const struct rte_eth_conf port_conf = {
- .rxmode = {
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc= 0, /**< CRC stripped by hardware */
- },
-
- .txmode = {
- .mq_mode = ETH_DCB_NONE
- },
- };
-
RX Queue Initialization
~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
index b459d4efe..2b2d5afa0 100644
--- a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
+++ b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
@@ -245,25 +245,6 @@ The rte_eth_dev_configure() function is used to configure the number of queues f
"err=%d, port=%u\n",
ret, portid);
-The global configuration is stored in a static structure:
-
-.. code-block:: c
-
- static const struct rte_eth_conf port_conf = {
- .rxmode = {
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc= 0, /**< CRC stripped by hardware */
- },
-
- .txmode = {
- .mq_mode = ETH_DCB_NONE
- },
- };
-
.. _l2_fwd_app_rx_init:
RX Queue Initialization
diff --git a/doc/guides/sample_app_ug/link_status_intr.rst b/doc/guides/sample_app_ug/link_status_intr.rst
index 8c11ba4ae..c7665fe5c 100644
--- a/doc/guides/sample_app_ug/link_status_intr.rst
+++ b/doc/guides/sample_app_ug/link_status_intr.rst
@@ -137,10 +137,7 @@ The global configuration is stored in a static structure:
static const struct rte_eth_conf port_conf = {
.rxmode = {
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .hw_strip_crc= 0, /**< CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {},
.intr_conf = {
diff --git a/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst b/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
index 83fcdf637..0e9da9707 100644
--- a/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
+++ b/doc/guides/sample_app_ug/vmdq_dcb_forwarding.rst
@@ -102,10 +102,6 @@ a default structure is provided for VMDQ and DCB configuration to be filled in l
.rxmode = {
.mq_mode = ETH_MQ_RX_VMDQ_DCB,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
},
.txmode = {
.mq_mode = ETH_MQ_TX_VMDQ_DCB,
diff --git a/examples/bbdev_app/main.c b/examples/bbdev_app/main.c
index 254cc0676..045a190b9 100644
--- a/examples/bbdev_app/main.c
+++ b/examples/bbdev_app/main.c
@@ -64,11 +64,7 @@ static const struct rte_eth_conf port_conf = {
.mq_mode = ETH_MQ_RX_NONE,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
diff --git a/examples/ip_pipeline/link.c b/examples/ip_pipeline/link.c
index b8a431f3e..181c31f9c 100644
--- a/examples/ip_pipeline/link.c
+++ b/examples/ip_pipeline/link.c
@@ -40,18 +40,9 @@ static struct rte_eth_conf port_conf_default = {
.link_speeds = 0,
.rxmode = {
.mq_mode = ETH_MQ_RX_NONE,
-
- .header_split = 0, /* Header split */
- .hw_ip_checksum = 0, /* IP checksum offload */
- .hw_vlan_filter = 0, /* VLAN filtering */
- .hw_vlan_strip = 0, /* VLAN strip */
- .hw_vlan_extend = 0, /* Extended VLAN */
- .jumbo_frame = 0, /* Jumbo frame support */
- .hw_strip_crc = 1, /* CRC strip by HW */
- .enable_scatter = 0, /* Scattered packets RX handler */
-
.max_rx_pkt_len = 9000, /* Jumbo frame max packet len */
.split_hdr_size = 0, /* Header split buffer size */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.rx_adv_conf = {
.rss_conf = {
diff --git a/test/test-pipeline/init.c b/test/test-pipeline/init.c
index 19cf04a6c..f33216c90 100644
--- a/test/test-pipeline/init.c
+++ b/test/test-pipeline/init.c
@@ -70,11 +70,7 @@ struct app_params app = {
static struct rte_eth_conf port_conf = {
.rxmode = {
.split_hdr_size = 0,
- .header_split = 0, /* Header Split disabled */
- .hw_ip_checksum = 1, /* IP checksum offload enabled */
- .hw_vlan_filter = 0, /* VLAN filtering disabled */
- .jumbo_frame = 0, /* Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /* CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CHECKSUM | DEV_RX_OFFLOAD_CRC_STRIP,
},
.rx_adv_conf = {
.rss_conf = {
diff --git a/test/test/test_kni.c b/test/test/test_kni.c
index 56773c8a2..1b876719a 100644
--- a/test/test/test_kni.c
+++ b/test/test/test_kni.c
@@ -71,11 +71,7 @@ static const struct rte_eth_txconf tx_conf = {
static const struct rte_eth_conf port_conf = {
.rxmode = {
- .header_split = 0,
- .hw_ip_checksum = 0,
- .hw_vlan_filter = 0,
- .jumbo_frame = 0,
- .hw_strip_crc = 1,
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_DCB_NONE,
diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c
index d74c0ab4e..ff0576a54 100644
--- a/test/test/test_link_bonding.c
+++ b/test/test/test_link_bonding.c
@@ -43,9 +43,6 @@
#define TX_HTHRESH 0
#define TX_WTHRESH 0
#define TX_RSBIT_THRESH 32
-#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
- ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
- ETH_TXQ_FLAGS_NOXSUMTCP)
#define MBUF_CACHE_SIZE (250)
#define BURST_SIZE (32)
@@ -138,13 +135,9 @@ static uint16_t vlan_id = 0x100;
static struct rte_eth_conf default_pmd_conf = {
.rxmode = {
.mq_mode = ETH_MQ_RX_NONE,
- .max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
+ .max_rx_pkt_len = ETHER_MAX_LEN,
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -170,8 +163,6 @@ static struct rte_eth_txconf tx_conf_default = {
},
.tx_free_thresh = TX_FREE_THRESH,
.tx_rs_thresh = TX_RSBIT_THRESH,
- .txq_flags = TX_Q_FLAGS
-
};
static void free_virtualpmd_tx_queue(void);
diff --git a/test/test/test_link_bonding_mode4.c b/test/test/test_link_bonding_mode4.c
index 33c1fab01..9163f6313 100644
--- a/test/test/test_link_bonding_mode4.c
+++ b/test/test/test_link_bonding_mode4.c
@@ -110,11 +110,7 @@ static struct rte_eth_conf default_pmd_conf = {
.mq_mode = ETH_MQ_RX_NONE,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
--git a/test/test/test_link_bonding_rssconf.c b/test/test/test_link_bonding_rssconf.c
index 6a1a28d23..e6e798f5b 100644
--- a/test/test/test_link_bonding_rssconf.c
+++ b/test/test/test_link_bonding_rssconf.c
@@ -83,11 +83,7 @@ static struct rte_eth_conf default_pmd_conf = {
.mq_mode = ETH_MQ_RX_NONE,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -100,11 +96,7 @@ static struct rte_eth_conf rss_pmd_conf = {
.mq_mode = ETH_MQ_RX_RSS,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
diff --git a/test/test/test_pmd_perf.c b/test/test/test_pmd_perf.c
index 54bc4f6b0..4549965fc 100644
--- a/test/test/test_pmd_perf.c
+++ b/test/test/test_pmd_perf.c
@@ -65,14 +65,7 @@ static struct rte_eth_conf port_conf = {
.mq_mode = ETH_MQ_RX_NONE,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload enabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .hw_vlan_strip = 0, /**< VLAN strip enabled. */
- .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 1, /**< CRC stripped by hardware */
- .enable_scatter = 0, /**< scatter rx disabled */
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -97,11 +90,6 @@ static struct rte_eth_txconf tx_conf = {
},
.tx_free_thresh = 32, /* Use PMD default values */
.tx_rs_thresh = 32, /* Use PMD default values */
- .txq_flags = (ETH_TXQ_FLAGS_NOMULTSEGS |
- ETH_TXQ_FLAGS_NOVLANOFFL |
- ETH_TXQ_FLAGS_NOXSUMSCTP |
- ETH_TXQ_FLAGS_NOXSUMUDP |
- ETH_TXQ_FLAGS_NOXSUMTCP)
};
enum {
@@ -808,38 +796,29 @@ test_set_rxtx_conf(cmdline_fixed_string_t mode)
if (!strcmp(mode, "vector")) {
/* vector rx, tx */
- tx_conf.txq_flags = 0xf01;
tx_conf.tx_rs_thresh = 32;
tx_conf.tx_free_thresh = 32;
- port_conf.rxmode.hw_ip_checksum = 0;
- port_conf.rxmode.enable_scatter = 0;
return 0;
} else if (!strcmp(mode, "scalar")) {
/* bulk alloc rx, full-featured tx */
- tx_conf.txq_flags = 0;
tx_conf.tx_rs_thresh = 32;
tx_conf.tx_free_thresh = 32;
- port_conf.rxmode.hw_ip_checksum = 1;
- port_conf.rxmode.enable_scatter = 0;
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_CHECKSUM;
return 0;
} else if (!strcmp(mode, "hybrid")) {
/* bulk alloc rx, vector tx
* when vec macro not define,
* using the same rx/tx as scalar
*/
- tx_conf.txq_flags = 0xf01;
tx_conf.tx_rs_thresh = 32;
tx_conf.tx_free_thresh = 32;
- port_conf.rxmode.hw_ip_checksum = 1;
- port_conf.rxmode.enable_scatter = 0;
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_CHECKSUM;
return 0;
} else if (!strcmp(mode, "full")) {
/* full feature rx,tx pair */
- tx_conf.txq_flags = 0x0; /* must condition */
tx_conf.tx_rs_thresh = 32;
tx_conf.tx_free_thresh = 32;
- port_conf.rxmode.hw_ip_checksum = 0;
- port_conf.rxmode.enable_scatter = 1; /* must condition */
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_SCATTER;
return 0;
}
--
2.17.1
next prev parent reply other threads:[~2018-07-02 21:28 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-08 22:41 [dpdk-dev] [RFC] ethdev: remove all " Ferruh Yigit
2018-06-08 21:52 ` Ferruh Yigit
2018-06-09 8:04 ` Andrew Rybchenko
2018-06-11 9:09 ` Ferruh Yigit
2018-06-11 11:00 ` Shahaf Shuler
2018-06-11 11:18 ` Ferruh Yigit
2018-06-11 11:26 ` Ananyev, Konstantin
2018-06-11 11:35 ` Ferruh Yigit
2018-06-11 11:35 ` Shahaf Shuler
2018-06-11 12:12 ` Ferruh Yigit
2018-06-29 1:11 ` Thomas Monjalon
2018-07-02 21:27 ` [dpdk-dev] [PATCH v2 0/5] remove old ethdev " Thomas Monjalon
2018-07-02 21:27 ` [dpdk-dev] [PATCH v2 1/5] doc: remove code from KNI example guide Thomas Monjalon
2018-07-02 21:27 ` [dpdk-dev] [PATCH v2 2/5] test: remove unused configuration for bonding Thomas Monjalon
2018-07-02 21:27 ` Thomas Monjalon [this message]
2018-07-04 11:16 ` [dpdk-dev] [PATCH v2 3/5] ethdev: convert remaining apps to new offload API Andrew Rybchenko
2018-07-04 12:26 ` Thomas Monjalon
2018-07-04 12:52 ` Andrew Rybchenko
2018-07-02 21:27 ` [dpdk-dev] [PATCH v2 4/5] net/fm10k: remove unused constant Thomas Monjalon
2018-07-02 21:27 ` [dpdk-dev] [PATCH v2 5/5] ethdev: remove old offload API Thomas Monjalon
2018-07-03 12:28 ` Shahaf Shuler
2018-07-04 11:31 ` Andrew Rybchenko
2018-07-03 18:37 ` [dpdk-dev] [PATCH v2 0/5] remove old ethdev " Ferruh Yigit
2018-07-04 18:56 ` Ferruh Yigit
2018-07-02 21:34 ` [dpdk-dev] [RFC] ethdev: remove all " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180702212750.16758-4-thomas@monjalon.net \
--to=thomas@monjalon.net \
--cc=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=rasesh.mody@cavium.com \
--cc=ravi1.kumar@amd.com \
--cc=shahafs@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).