From: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To: declan.doherty@intel.com, akhil.goyal@nxp.com,
shally.verma@caviumnetworks.com, ravi1.kumar@amd.com,
jerin.jacob@caviumnetworks.com, roy.fan.zhang@intel.com,
fiona.trahe@intel.com, tdu@semihalf.com, jianjay.zhou@huawei.com
Cc: dev@dpdk.org, Pablo de Lara <pablo.de.lara.guarch@intel.com>
Subject: [dpdk-dev] [PATCH v4 09/16] cryptodev: remove max number of sessions parameter
Date: Wed, 4 Jul 2018 09:51:47 +0100 [thread overview]
Message-ID: <20180704085154.37828-10-pablo.de.lara.guarch@intel.com> (raw)
In-Reply-To: <20180704085154.37828-1-pablo.de.lara.guarch@intel.com>
Most crypto PMDs do not have a limitation
of the number of the sessions that can be handled
internally. The value that was set before was not
actually used at all, since the sessions are created
at the application level.
Therefore, this value is not parsed from the initial
crypto parameters anymore and it is set to 0,
meaning that there is no actual limit.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
---
config/common_base | 7 -------
config/rte_config.h | 7 -------
doc/guides/cryptodevs/dpaa2_sec.rst | 5 -----
doc/guides/cryptodevs/dpaa_sec.rst | 5 -----
doc/guides/prog_guide/cryptodev_lib.rst | 5 ++---
drivers/crypto/aesni_gcm/aesni_gcm_pmd.c | 5 +----
drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c | 3 ++-
drivers/crypto/aesni_gcm/aesni_gcm_pmd_private.h | 2 --
drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c | 5 +----
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c | 3 ++-
drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h | 2 --
drivers/crypto/armv8/rte_armv8_pmd.c | 5 +----
drivers/crypto/armv8/rte_armv8_pmd_ops.c | 3 ++-
drivers/crypto/armv8/rte_armv8_pmd_private.h | 2 --
drivers/crypto/ccp/ccp_pmd_ops.c | 3 ++-
drivers/crypto/ccp/ccp_pmd_private.h | 1 -
drivers/crypto/ccp/rte_ccp_pmd.c | 16 +---------------
drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 4 ++--
drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 2 --
drivers/crypto/dpaa_sec/dpaa_sec.h | 1 +
drivers/crypto/kasumi/rte_kasumi_pmd.c | 5 +----
drivers/crypto/kasumi/rte_kasumi_pmd_ops.c | 3 ++-
drivers/crypto/kasumi/rte_kasumi_pmd_private.h | 2 --
drivers/crypto/null/null_crypto_pmd.c | 5 +----
drivers/crypto/null/null_crypto_pmd_ops.c | 3 ++-
drivers/crypto/null/null_crypto_pmd_private.h | 1 -
drivers/crypto/openssl/rte_openssl_pmd.c | 5 +----
drivers/crypto/openssl/rte_openssl_pmd_ops.c | 3 ++-
drivers/crypto/openssl/rte_openssl_pmd_private.h | 2 --
drivers/crypto/qat/qat_sym_pmd.c | 6 +++---
drivers/crypto/qat/qat_sym_pmd.h | 1 -
drivers/crypto/scheduler/scheduler_pmd.c | 13 +------------
drivers/crypto/scheduler/scheduler_pmd_ops.c | 14 +++++++-------
drivers/crypto/snow3g/rte_snow3g_pmd.c | 5 +----
drivers/crypto/snow3g/rte_snow3g_pmd_ops.c | 3 ++-
drivers/crypto/snow3g/rte_snow3g_pmd_private.h | 2 --
drivers/crypto/virtio/virtio_cryptodev.c | 7 +++----
drivers/crypto/zuc/rte_zuc_pmd.c | 5 +----
drivers/crypto/zuc/rte_zuc_pmd_ops.c | 3 ++-
drivers/crypto/zuc/rte_zuc_pmd_private.h | 2 --
lib/librte_cryptodev/rte_cryptodev_pmd.c | 12 ++----------
lib/librte_cryptodev/rte_cryptodev_pmd.h | 4 ----
42 files changed, 48 insertions(+), 144 deletions(-)
diff --git a/config/common_base b/config/common_base
index 4236e295b..e84307c66 100644
--- a/config/common_base
+++ b/config/common_base
@@ -472,14 +472,12 @@ CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
-CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS=2048
#
# Compile PMD for QuickAssist based devices
@@ -498,11 +496,6 @@ CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
-#
-# Number of sessions to create in the session memory pool
-# on a single virtio crypto device.
-#
-CONFIG_RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS=1024
#
# Compile PMD for AESNI backed device
diff --git a/config/rte_config.h b/config/rte_config.h
index 0ba0ead7e..8a3432aca 100644
--- a/config/rte_config.h
+++ b/config/rte_config.h
@@ -90,15 +90,8 @@
#define RTE_PMD_QAT_MAX_PCI_DEVICES 48
/* virtio crypto defines */
-#define RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS 1024
#define RTE_MAX_VIRTIO_CRYPTO 32
-/* DPAA2_SEC */
-#define RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS 2048
-
-/* DPAA_SEC */
-#define RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS 2048
-
/* DPAA SEC max cryptodev devices*/
#define RTE_LIBRTE_DPAA_MAX_CRYPTODEV 4
diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst
index 3ea24c8aa..990befeb7 100644
--- a/doc/guides/cryptodevs/dpaa2_sec.rst
+++ b/doc/guides/cryptodevs/dpaa2_sec.rst
@@ -200,11 +200,6 @@ Please note that enabling debugging options may affect system performance.
By default it is only enabled in defconfig_arm64-dpaa2-* config.
Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver.
-* ``CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS``
- By default it is set as 2048 in defconfig_arm64-dpaa2-* config.
- It indicates Number of sessions to create in the session memory pool
- on a single DPAA2 SEC device.
-
Installations
-------------
To compile the DPAA2_SEC PMD for Linux arm64 gcc target, run the
diff --git a/doc/guides/cryptodevs/dpaa_sec.rst b/doc/guides/cryptodevs/dpaa_sec.rst
index c14d6d7b1..c5097a84f 100644
--- a/doc/guides/cryptodevs/dpaa_sec.rst
+++ b/doc/guides/cryptodevs/dpaa_sec.rst
@@ -145,11 +145,6 @@ Please note that enabling debugging options may affect system performance.
By default it is only enabled in defconfig_arm64-dpaa-* config.
Toggle compilation of the ``librte_pmd_dpaa_sec`` driver.
-* ``CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS``
- By default it is set as 2048 in defconfig_arm64-dpaa-* config.
- It indicates Number of sessions to create in the session memory pool
- on a single DPAA SEC device.
-
Installations
-------------
To compile the DPAA_SEC PMD for Linux arm64 gcc target, run the
diff --git a/doc/guides/prog_guide/cryptodev_lib.rst b/doc/guides/prog_guide/cryptodev_lib.rst
index d02bb7514..d2a74a362 100644
--- a/doc/guides/prog_guide/cryptodev_lib.rst
+++ b/doc/guides/prog_guide/cryptodev_lib.rst
@@ -41,7 +41,7 @@ From the command line using the --vdev EAL option
.. code-block:: console
- --vdev 'crypto_aesni_mb0,max_nb_queue_pairs=2,max_nb_sessions=1024,socket_id=0'
+ --vdev 'crypto_aesni_mb0,max_nb_queue_pairs=2,socket_id=0'
.. Note::
@@ -57,12 +57,11 @@ Our using the rte_vdev_init API within the application code.
.. code-block:: c
rte_vdev_init("crypto_aesni_mb",
- "max_nb_queue_pairs=2,max_nb_sessions=1024,socket_id=0")
+ "max_nb_queue_pairs=2,socket_id=0")
All virtual Crypto devices support the following initialization parameters:
* ``max_nb_queue_pairs`` - maximum number of queue pairs supported by the device.
-* ``max_nb_sessions`` - maximum number of sessions supported by the device
* ``socket_id`` - socket on which to allocate the device resources on.
diff --git a/drivers/crypto/aesni_gcm/aesni_gcm_pmd.c b/drivers/crypto/aesni_gcm/aesni_gcm_pmd.c
index d196826f0..88307e0e7 100644
--- a/drivers/crypto/aesni_gcm/aesni_gcm_pmd.c
+++ b/drivers/crypto/aesni_gcm/aesni_gcm_pmd.c
@@ -513,7 +513,6 @@ aesni_gcm_create(const char *name,
internals->vector_mode = vector_mode;
internals->max_nb_queue_pairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
}
@@ -525,8 +524,7 @@ aesni_gcm_probe(struct rte_vdev_device *vdev)
"",
sizeof(struct aesni_gcm_private),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
};
const char *name;
const char *input_args;
@@ -568,7 +566,6 @@ RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_AESNI_GCM_PMD, aesni_gcm_pmd_drv);
RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_AESNI_GCM_PMD, cryptodev_aesni_gcm_pmd);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_AESNI_GCM_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(aesni_gcm_crypto_drv, aesni_gcm_pmd_drv.driver,
cryptodev_driver_id);
diff --git a/drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c b/drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c
index eacbdc09a..1f4edc0f2 100644
--- a/drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c
+++ b/drivers/crypto/aesni_gcm/aesni_gcm_pmd_ops.c
@@ -143,7 +143,8 @@ aesni_gcm_pmd_info_get(struct rte_cryptodev *dev,
dev_info->capabilities = aesni_gcm_pmd_capabilities;
dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
}
}
diff --git a/drivers/crypto/aesni_gcm/aesni_gcm_pmd_private.h b/drivers/crypto/aesni_gcm/aesni_gcm_pmd_private.h
index 2b9c251c0..0bcd4fa09 100644
--- a/drivers/crypto/aesni_gcm/aesni_gcm_pmd_private.h
+++ b/drivers/crypto/aesni_gcm/aesni_gcm_pmd_private.h
@@ -26,8 +26,6 @@ struct aesni_gcm_private {
/**< Vector mode */
unsigned max_nb_queue_pairs;
/**< Max number of queue pairs supported by device */
- unsigned max_nb_sessions;
- /**< Max number of sessions supported by device */
};
struct aesni_gcm_qp {
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
index 9ae2b54f4..17ac43f0f 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c
@@ -885,7 +885,6 @@ cryptodev_aesni_mb_create(const char *name,
internals->vector_mode = vector_mode;
internals->max_nb_queue_pairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
}
@@ -897,8 +896,7 @@ cryptodev_aesni_mb_probe(struct rte_vdev_device *vdev)
"",
sizeof(struct aesni_mb_private),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
};
const char *name, *args;
int retval;
@@ -947,7 +945,6 @@ RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_AESNI_MB_PMD, cryptodev_aesni_mb_pmd_drv);
RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_AESNI_MB_PMD, cryptodev_aesni_mb_pmd);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_AESNI_MB_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(aesni_mb_crypto_drv,
cryptodev_aesni_mb_pmd_drv.driver,
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
index 6a96d5077..6cd4134af 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_ops.c
@@ -387,7 +387,8 @@ aesni_mb_pmd_info_get(struct rte_cryptodev *dev,
dev_info->feature_flags = dev->feature_flags;
dev_info->capabilities = aesni_mb_pmd_capabilities;
dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
}
}
diff --git a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
index bad2a8743..91fd7409e 100644
--- a/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
+++ b/drivers/crypto/aesni_mb/rte_aesni_mb_pmd_private.h
@@ -113,8 +113,6 @@ struct aesni_mb_private {
/**< CPU vector instruction set mode */
unsigned max_nb_queue_pairs;
/**< Max number of queue pairs supported by device */
- unsigned max_nb_sessions;
- /**< Max number of sessions supported by device */
};
/** AESNI Multi buffer queue pair */
diff --git a/drivers/crypto/armv8/rte_armv8_pmd.c b/drivers/crypto/armv8/rte_armv8_pmd.c
index fbb08f729..db0d8a2a9 100644
--- a/drivers/crypto/armv8/rte_armv8_pmd.c
+++ b/drivers/crypto/armv8/rte_armv8_pmd.c
@@ -779,7 +779,6 @@ cryptodev_armv8_crypto_create(const char *name,
internals = dev->data->dev_private;
internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
@@ -800,8 +799,7 @@ cryptodev_armv8_crypto_init(struct rte_vdev_device *vdev)
"",
sizeof(struct armv8_crypto_private),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
};
const char *name;
const char *input_args;
@@ -848,7 +846,6 @@ RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_ARMV8_PMD, armv8_crypto_pmd_drv);
RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_ARMV8_PMD, cryptodev_armv8_pmd);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_ARMV8_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(armv8_crypto_drv, armv8_crypto_pmd_drv.driver,
cryptodev_driver_id);
diff --git a/drivers/crypto/armv8/rte_armv8_pmd_ops.c b/drivers/crypto/armv8/rte_armv8_pmd_ops.c
index c64aef09f..b654f7528 100644
--- a/drivers/crypto/armv8/rte_armv8_pmd_ops.c
+++ b/drivers/crypto/armv8/rte_armv8_pmd_ops.c
@@ -154,7 +154,8 @@ armv8_crypto_pmd_info_get(struct rte_cryptodev *dev,
dev_info->feature_flags = dev->feature_flags;
dev_info->capabilities = armv8_crypto_pmd_capabilities;
dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
}
}
diff --git a/drivers/crypto/armv8/rte_armv8_pmd_private.h b/drivers/crypto/armv8/rte_armv8_pmd_private.h
index b8966e934..7feb021db 100644
--- a/drivers/crypto/armv8/rte_armv8_pmd_private.h
+++ b/drivers/crypto/armv8/rte_armv8_pmd_private.h
@@ -106,8 +106,6 @@ typedef void (*crypto_key_sched_t)(uint8_t *, const uint8_t *);
struct armv8_crypto_private {
unsigned int max_nb_qpairs;
/**< Max number of queue pairs */
- unsigned int max_nb_sessions;
- /**< Max number of sessions */
};
/** ARMv8 crypto queue pair */
diff --git a/drivers/crypto/ccp/ccp_pmd_ops.c b/drivers/crypto/ccp/ccp_pmd_ops.c
index 80b75ccb0..dbe545c10 100644
--- a/drivers/crypto/ccp/ccp_pmd_ops.c
+++ b/drivers/crypto/ccp/ccp_pmd_ops.c
@@ -624,7 +624,8 @@ ccp_pmd_info_get(struct rte_cryptodev *dev,
if (internals->auth_opt == 1)
dev_info->capabilities = ccp_crypto_cap_complete;
dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
}
}
diff --git a/drivers/crypto/ccp/ccp_pmd_private.h b/drivers/crypto/ccp/ccp_pmd_private.h
index f4498048f..79752f687 100644
--- a/drivers/crypto/ccp/ccp_pmd_private.h
+++ b/drivers/crypto/ccp/ccp_pmd_private.h
@@ -40,7 +40,6 @@
/* private data structure for each CCP crypto device */
struct ccp_private {
unsigned int max_nb_qpairs; /**< Max number of queue pairs */
- unsigned int max_nb_sessions; /**< Max number of sessions */
uint8_t crypto_num_dev; /**< Number of working crypto devices */
bool auth_opt; /**< Authentication offload option */
struct ccp_device *last_dev; /**< Last working crypto device */
diff --git a/drivers/crypto/ccp/rte_ccp_pmd.c b/drivers/crypto/ccp/rte_ccp_pmd.c
index 2061f465e..d70640f6d 100644
--- a/drivers/crypto/ccp/rte_ccp_pmd.c
+++ b/drivers/crypto/ccp/rte_ccp_pmd.c
@@ -30,14 +30,12 @@ struct ccp_pmd_init_params {
#define CCP_CRYPTODEV_PARAM_NAME ("name")
#define CCP_CRYPTODEV_PARAM_SOCKET_ID ("socket_id")
#define CCP_CRYPTODEV_PARAM_MAX_NB_QP ("max_nb_queue_pairs")
-#define CCP_CRYPTODEV_PARAM_MAX_NB_SESS ("max_nb_sessions")
#define CCP_CRYPTODEV_PARAM_AUTH_OPT ("ccp_auth_opt")
const char *ccp_pmd_valid_params[] = {
CCP_CRYPTODEV_PARAM_NAME,
CCP_CRYPTODEV_PARAM_SOCKET_ID,
CCP_CRYPTODEV_PARAM_MAX_NB_QP,
- CCP_CRYPTODEV_PARAM_MAX_NB_SESS,
CCP_CRYPTODEV_PARAM_AUTH_OPT,
};
@@ -124,13 +122,6 @@ ccp_pmd_parse_input_args(struct ccp_pmd_init_params *params,
if (ret < 0)
goto free_kvlist;
- ret = rte_kvargs_process(kvlist,
- CCP_CRYPTODEV_PARAM_MAX_NB_SESS,
- &parse_integer_arg,
- ¶ms->def_p.max_nb_sessions);
- if (ret < 0)
- goto free_kvlist;
-
ret = rte_kvargs_process(kvlist,
CCP_CRYPTODEV_PARAM_SOCKET_ID,
&parse_integer_arg,
@@ -334,7 +325,6 @@ cryptodev_ccp_create(const char *name,
internals = dev->data->dev_private;
internals->max_nb_qpairs = init_params->def_p.max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->def_p.max_nb_sessions;
internals->auth_opt = init_params->auth_opt;
internals->crypto_num_dev = cryptodev_cnt;
@@ -359,8 +349,7 @@ cryptodev_ccp_probe(struct rte_vdev_device *vdev)
"",
sizeof(struct ccp_private),
rte_socket_id(),
- CCP_PMD_MAX_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ CCP_PMD_MAX_QUEUE_PAIRS
},
.auth_opt = CCP_PMD_AUTH_OPT_CCP,
};
@@ -382,8 +371,6 @@ cryptodev_ccp_probe(struct rte_vdev_device *vdev)
init_params.def_p.socket_id);
RTE_LOG(INFO, PMD, "Max number of queue pairs = %d\n",
init_params.def_p.max_nb_queue_pairs);
- RTE_LOG(INFO, PMD, "Max number of sessions = %d\n",
- init_params.def_p.max_nb_sessions);
RTE_LOG(INFO, PMD, "Authentication offload to %s\n",
((init_params.auth_opt == 0) ? "CCP" : "CPU"));
@@ -404,7 +391,6 @@ static struct cryptodev_driver ccp_crypto_drv;
RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_CCP_PMD, cryptodev_ccp_pmd_drv);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CCP_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int> "
"ccp_auth_opt=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(ccp_crypto_drv, cryptodev_ccp_pmd_drv.driver,
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 56fa969d3..bc091c560 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -2626,7 +2626,8 @@ dpaa2_sec_dev_infos_get(struct rte_cryptodev *dev,
info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
info->feature_flags = dev->feature_flags;
info->capabilities = dpaa2_sec_capabilities;
- info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ info->sym.max_nb_sessions = 0;
info->driver_id = cryptodev_driver_id;
}
}
@@ -2786,7 +2787,6 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER;
internals = cryptodev->data->dev_private;
- internals->max_nb_sessions = RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS;
/*
* For secondary processes, we don't initialise any further as primary
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
index a9d83ebce..d015be1e9 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
@@ -23,8 +23,6 @@ struct dpaa2_sec_dev_private {
uint16_t token; /**< Token required by DPxxx objects */
unsigned int max_nb_queue_pairs;
/**< Max number of queue pairs supported by device */
- unsigned int max_nb_sessions;
- /**< Max number of sessions supported by device */
};
struct dpaa2_sec_qp {
diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.h b/drivers/crypto/dpaa_sec/dpaa_sec.h
index e15e373fd..ac6c00a60 100644
--- a/drivers/crypto/dpaa_sec/dpaa_sec.h
+++ b/drivers/crypto/dpaa_sec/dpaa_sec.h
@@ -26,6 +26,7 @@
#define CTX_POOL_NUM_BUFS 32000
#define CTX_POOL_BUF_SIZE sizeof(struct dpaa_sec_op_ctx)
#define CTX_POOL_CACHE_SIZE 512
+#define RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS 2048
#define DIR_ENC 1
#define DIR_DEC 0
diff --git a/drivers/crypto/kasumi/rte_kasumi_pmd.c b/drivers/crypto/kasumi/rte_kasumi_pmd.c
index 0e783ed9b..9eb43b2eb 100644
--- a/drivers/crypto/kasumi/rte_kasumi_pmd.c
+++ b/drivers/crypto/kasumi/rte_kasumi_pmd.c
@@ -559,7 +559,6 @@ cryptodev_kasumi_create(const char *name,
internals = dev->data->dev_private;
internals->max_nb_queue_pairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
init_error:
@@ -577,8 +576,7 @@ cryptodev_kasumi_probe(struct rte_vdev_device *vdev)
"",
sizeof(struct kasumi_private),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
};
const char *name;
const char *input_args;
@@ -621,7 +619,6 @@ RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_KASUMI_PMD, cryptodev_kasumi_pmd_drv);
RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_KASUMI_PMD, cryptodev_kasumi_pmd);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_KASUMI_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(kasumi_crypto_drv,
cryptodev_kasumi_pmd_drv.driver, cryptodev_driver_id);
diff --git a/drivers/crypto/kasumi/rte_kasumi_pmd_ops.c b/drivers/crypto/kasumi/rte_kasumi_pmd_ops.c
index d087eabe4..5593238f2 100644
--- a/drivers/crypto/kasumi/rte_kasumi_pmd_ops.c
+++ b/drivers/crypto/kasumi/rte_kasumi_pmd_ops.c
@@ -126,7 +126,8 @@ kasumi_pmd_info_get(struct rte_cryptodev *dev,
if (dev_info != NULL) {
dev_info->driver_id = dev->driver_id;
dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
dev_info->feature_flags = dev->feature_flags;
dev_info->capabilities = kasumi_pmd_capabilities;
}
diff --git a/drivers/crypto/kasumi/rte_kasumi_pmd_private.h b/drivers/crypto/kasumi/rte_kasumi_pmd_private.h
index 102334e0a..488777ca8 100644
--- a/drivers/crypto/kasumi/rte_kasumi_pmd_private.h
+++ b/drivers/crypto/kasumi/rte_kasumi_pmd_private.h
@@ -24,8 +24,6 @@ int kasumi_logtype_driver;
struct kasumi_private {
unsigned max_nb_queue_pairs;
/**< Max number of queue pairs supported by device */
- unsigned max_nb_sessions;
- /**< Max number of sessions supported by device */
};
/** KASUMI buffer queue pair */
diff --git a/drivers/crypto/null/null_crypto_pmd.c b/drivers/crypto/null/null_crypto_pmd.c
index 8699f1219..07276833b 100644
--- a/drivers/crypto/null/null_crypto_pmd.c
+++ b/drivers/crypto/null/null_crypto_pmd.c
@@ -181,7 +181,6 @@ cryptodev_null_create(const char *name,
internals = dev->data->dev_private;
internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
}
@@ -194,8 +193,7 @@ cryptodev_null_probe(struct rte_vdev_device *dev)
"",
sizeof(struct null_crypto_private),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
};
const char *name, *args;
int retval;
@@ -245,7 +243,6 @@ RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_NULL_PMD, cryptodev_null_pmd_drv);
RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_NULL_PMD, cryptodev_null_pmd);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_NULL_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(null_crypto_drv, cryptodev_null_pmd_drv.driver,
cryptodev_driver_id);
diff --git a/drivers/crypto/null/null_crypto_pmd_ops.c b/drivers/crypto/null/null_crypto_pmd_ops.c
index 9a78e91d1..55778a255 100644
--- a/drivers/crypto/null/null_crypto_pmd_ops.c
+++ b/drivers/crypto/null/null_crypto_pmd_ops.c
@@ -121,7 +121,8 @@ null_crypto_pmd_info_get(struct rte_cryptodev *dev,
if (dev_info != NULL) {
dev_info->driver_id = dev->driver_id;
dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
dev_info->feature_flags = dev->feature_flags;
dev_info->capabilities = null_crypto_pmd_capabilities;
}
diff --git a/drivers/crypto/null/null_crypto_pmd_private.h b/drivers/crypto/null/null_crypto_pmd_private.h
index 190b88dc7..d5905afd8 100644
--- a/drivers/crypto/null/null_crypto_pmd_private.h
+++ b/drivers/crypto/null/null_crypto_pmd_private.h
@@ -19,7 +19,6 @@ int null_logtype_driver;
/** private data structure for each NULL crypto device */
struct null_crypto_private {
unsigned max_nb_qpairs; /**< Max number of queue pairs */
- unsigned max_nb_sessions; /**< Max number of sessions */
};
/** NULL crypto queue pair */
diff --git a/drivers/crypto/openssl/rte_openssl_pmd.c b/drivers/crypto/openssl/rte_openssl_pmd.c
index bfdfcdd9a..1ccab4ab5 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd.c
@@ -1666,7 +1666,6 @@ cryptodev_openssl_create(const char *name,
internals = dev->data->dev_private;
internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
@@ -1686,8 +1685,7 @@ cryptodev_openssl_probe(struct rte_vdev_device *vdev)
"",
sizeof(struct openssl_private),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
};
const char *name;
const char *input_args;
@@ -1731,7 +1729,6 @@ RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_OPENSSL_PMD,
cryptodev_openssl_pmd_drv);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_OPENSSL_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(openssl_crypto_drv,
cryptodev_openssl_pmd_drv.driver, cryptodev_driver_id);
diff --git a/drivers/crypto/openssl/rte_openssl_pmd_ops.c b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
index 488afcf7d..a1a2d9900 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd_ops.c
+++ b/drivers/crypto/openssl/rte_openssl_pmd_ops.c
@@ -547,7 +547,8 @@ openssl_pmd_info_get(struct rte_cryptodev *dev,
dev_info->feature_flags = dev->feature_flags;
dev_info->capabilities = openssl_pmd_capabilities;
dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
}
}
diff --git a/drivers/crypto/openssl/rte_openssl_pmd_private.h b/drivers/crypto/openssl/rte_openssl_pmd_private.h
index 051fb203d..29fcb761a 100644
--- a/drivers/crypto/openssl/rte_openssl_pmd_private.h
+++ b/drivers/crypto/openssl/rte_openssl_pmd_private.h
@@ -49,8 +49,6 @@ enum openssl_auth_mode {
struct openssl_private {
unsigned int max_nb_qpairs;
/**< Max number of queue pairs */
- unsigned int max_nb_sessions;
- /**< Max number of sessions */
};
/** OPENSSL crypto queue pair */
diff --git a/drivers/crypto/qat/qat_sym_pmd.c b/drivers/crypto/qat/qat_sym_pmd.c
index 0bc042a75..84dd5bec8 100644
--- a/drivers/crypto/qat/qat_sym_pmd.c
+++ b/drivers/crypto/qat/qat_sym_pmd.c
@@ -72,8 +72,9 @@ static void qat_sym_dev_info_get(struct rte_cryptodev *dev,
qat_qps_per_service(sym_hw_qps, QAT_SERVICE_SYMMETRIC);
info->feature_flags = dev->feature_flags;
info->capabilities = internals->qat_dev_capabilities;
- info->sym.max_nb_sessions = QAT_SYM_PMD_MAX_NB_SESSIONS;
info->driver_id = cryptodev_qat_driver_id;
+ /* No limit of number of sessions */
+ info->sym.max_nb_sessions = 0;
}
}
@@ -243,8 +244,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev)
struct rte_cryptodev_pmd_init_params init_params = {
.name = "",
.socket_id = qat_pci_dev->pci_dev->device.numa_node,
- .private_data_size = sizeof(struct qat_sym_dev_private),
- .max_nb_sessions = QAT_SYM_PMD_MAX_NB_SESSIONS
+ .private_data_size = sizeof(struct qat_sym_dev_private)
};
char name[RTE_CRYPTODEV_NAME_MAX_LEN];
struct rte_cryptodev *cryptodev;
diff --git a/drivers/crypto/qat/qat_sym_pmd.h b/drivers/crypto/qat/qat_sym_pmd.h
index 439aeb98a..d34328544 100644
--- a/drivers/crypto/qat/qat_sym_pmd.h
+++ b/drivers/crypto/qat/qat_sym_pmd.h
@@ -14,7 +14,6 @@
/**< Intel(R) QAT Symmetric Crypto PMD device name */
#define CRYPTODEV_NAME_QAT_SYM_PMD crypto_qat
-#define QAT_SYM_PMD_MAX_NB_SESSIONS 2048
extern uint8_t cryptodev_qat_driver_id;
diff --git a/drivers/crypto/scheduler/scheduler_pmd.c b/drivers/crypto/scheduler/scheduler_pmd.c
index 5489e9ed0..6c5c01d63 100644
--- a/drivers/crypto/scheduler/scheduler_pmd.c
+++ b/drivers/crypto/scheduler/scheduler_pmd.c
@@ -31,7 +31,6 @@ struct scheduler_init_params {
#define RTE_CRYPTODEV_VDEV_MODE ("mode")
#define RTE_CRYPTODEV_VDEV_ORDERING ("ordering")
#define RTE_CRYPTODEV_VDEV_MAX_NB_QP_ARG ("max_nb_queue_pairs")
-#define RTE_CRYPTODEV_VDEV_MAX_NB_SESS_ARG ("max_nb_sessions")
#define RTE_CRYPTODEV_VDEV_SOCKET_ID ("socket_id")
#define RTE_CRYPTODEV_VDEV_COREMASK ("coremask")
#define RTE_CRYPTODEV_VDEV_CORELIST ("corelist")
@@ -42,7 +41,6 @@ const char *scheduler_valid_params[] = {
RTE_CRYPTODEV_VDEV_MODE,
RTE_CRYPTODEV_VDEV_ORDERING,
RTE_CRYPTODEV_VDEV_MAX_NB_QP_ARG,
- RTE_CRYPTODEV_VDEV_MAX_NB_SESS_ARG,
RTE_CRYPTODEV_VDEV_SOCKET_ID,
RTE_CRYPTODEV_VDEV_COREMASK,
RTE_CRYPTODEV_VDEV_CORELIST
@@ -406,13 +404,6 @@ scheduler_parse_init_params(struct scheduler_init_params *params,
if (ret < 0)
goto free_kvlist;
- ret = rte_kvargs_process(kvlist,
- RTE_CRYPTODEV_VDEV_MAX_NB_SESS_ARG,
- &parse_integer_arg,
- ¶ms->def_p.max_nb_sessions);
- if (ret < 0)
- goto free_kvlist;
-
ret = rte_kvargs_process(kvlist, RTE_CRYPTODEV_VDEV_SOCKET_ID,
&parse_integer_arg,
¶ms->def_p.socket_id);
@@ -466,8 +457,7 @@ cryptodev_scheduler_probe(struct rte_vdev_device *vdev)
"",
sizeof(struct scheduler_ctx),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
},
.nb_slaves = 0,
.mode = CDEV_SCHED_MODE_NOT_SET,
@@ -500,7 +490,6 @@ RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_SCHEDULER_PMD,
cryptodev_scheduler_pmd_drv);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_SCHEDULER_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int> "
"slave=<name>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(scheduler_crypto_drv,
diff --git a/drivers/crypto/scheduler/scheduler_pmd_ops.c b/drivers/crypto/scheduler/scheduler_pmd_ops.c
index 874205849..802585f4c 100644
--- a/drivers/crypto/scheduler/scheduler_pmd_ops.c
+++ b/drivers/crypto/scheduler/scheduler_pmd_ops.c
@@ -321,8 +321,7 @@ scheduler_pmd_info_get(struct rte_cryptodev *dev,
struct rte_cryptodev_info *dev_info)
{
struct scheduler_ctx *sched_ctx = dev->data->dev_private;
- uint32_t max_nb_sessions = sched_ctx->nb_slaves ?
- UINT32_MAX : RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS;
+ uint32_t max_nb_sess = 0;
uint32_t i;
if (!dev_info)
@@ -338,17 +337,18 @@ scheduler_pmd_info_get(struct rte_cryptodev *dev,
struct rte_cryptodev_info slave_info;
rte_cryptodev_info_get(slave_dev_id, &slave_info);
- max_nb_sessions = slave_info.sym.max_nb_sessions <
- max_nb_sessions ?
- slave_info.sym.max_nb_sessions :
- max_nb_sessions;
+ uint32_t dev_max_sess = slave_info.sym.max_nb_sessions;
+ if (dev_max_sess != 0) {
+ if (max_nb_sess == 0 || dev_max_sess < max_nb_sess)
+ max_nb_sess = slave_info.sym.max_nb_sessions;
+ }
}
dev_info->driver_id = dev->driver_id;
dev_info->feature_flags = dev->feature_flags;
dev_info->capabilities = sched_ctx->capabilities;
dev_info->max_nb_queue_pairs = sched_ctx->max_nb_queue_pairs;
- dev_info->sym.max_nb_sessions = max_nb_sessions;
+ dev_info->sym.max_nb_sessions = max_nb_sess;
}
/** Release queue pair */
diff --git a/drivers/crypto/snow3g/rte_snow3g_pmd.c b/drivers/crypto/snow3g/rte_snow3g_pmd.c
index 72751e35e..26dfbbc38 100644
--- a/drivers/crypto/snow3g/rte_snow3g_pmd.c
+++ b/drivers/crypto/snow3g/rte_snow3g_pmd.c
@@ -555,7 +555,6 @@ cryptodev_snow3g_create(const char *name,
internals = dev->data->dev_private;
internals->max_nb_queue_pairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
init_error:
@@ -573,8 +572,7 @@ cryptodev_snow3g_probe(struct rte_vdev_device *vdev)
"",
sizeof(struct snow3g_private),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
};
const char *name;
const char *input_args;
@@ -617,7 +615,6 @@ RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_SNOW3G_PMD, cryptodev_snow3g_pmd_drv);
RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_SNOW3G_PMD, cryptodev_snow3g_pmd);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_SNOW3G_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(snow3g_crypto_drv,
cryptodev_snow3g_pmd_drv.driver, cryptodev_driver_id);
diff --git a/drivers/crypto/snow3g/rte_snow3g_pmd_ops.c b/drivers/crypto/snow3g/rte_snow3g_pmd_ops.c
index f60b47598..6f8b9e2c6 100644
--- a/drivers/crypto/snow3g/rte_snow3g_pmd_ops.c
+++ b/drivers/crypto/snow3g/rte_snow3g_pmd_ops.c
@@ -130,7 +130,8 @@ snow3g_pmd_info_get(struct rte_cryptodev *dev,
if (dev_info != NULL) {
dev_info->driver_id = dev->driver_id;
dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
dev_info->feature_flags = dev->feature_flags;
dev_info->capabilities = snow3g_pmd_capabilities;
}
diff --git a/drivers/crypto/snow3g/rte_snow3g_pmd_private.h b/drivers/crypto/snow3g/rte_snow3g_pmd_private.h
index eea900e0a..2c6e1a948 100644
--- a/drivers/crypto/snow3g/rte_snow3g_pmd_private.h
+++ b/drivers/crypto/snow3g/rte_snow3g_pmd_private.h
@@ -36,8 +36,6 @@
struct snow3g_private {
unsigned max_nb_queue_pairs;
/**< Max number of queue pairs supported by device */
- unsigned max_nb_sessions;
- /**< Max number of sessions supported by device */
};
/** SNOW 3G buffer queue pair */
diff --git a/drivers/crypto/virtio/virtio_cryptodev.c b/drivers/crypto/virtio/virtio_cryptodev.c
index 482edea1a..1da4ae871 100644
--- a/drivers/crypto/virtio/virtio_cryptodev.c
+++ b/drivers/crypto/virtio/virtio_cryptodev.c
@@ -1411,8 +1411,8 @@ virtio_crypto_dev_info_get(struct rte_cryptodev *dev,
info->driver_id = cryptodev_virtio_driver_id;
info->feature_flags = dev->feature_flags;
info->max_nb_queue_pairs = hw->max_dataqueues;
- info->sym.max_nb_sessions =
- RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS;
+ /* No limit of number of sessions */
+ info->sym.max_nb_sessions = 0;
info->capabilities = hw->virtio_dev_capabilities;
}
}
@@ -1425,8 +1425,7 @@ crypto_virtio_pci_probe(
struct rte_cryptodev_pmd_init_params init_params = {
.name = "",
.socket_id = rte_socket_id(),
- .private_data_size = sizeof(struct virtio_crypto_hw),
- .max_nb_sessions = RTE_VIRTIO_CRYPTO_PMD_MAX_NB_SESSIONS
+ .private_data_size = sizeof(struct virtio_crypto_hw)
};
char name[RTE_CRYPTODEV_NAME_MAX_LEN];
diff --git a/drivers/crypto/zuc/rte_zuc_pmd.c b/drivers/crypto/zuc/rte_zuc_pmd.c
index 119d393e4..8de5c27db 100644
--- a/drivers/crypto/zuc/rte_zuc_pmd.c
+++ b/drivers/crypto/zuc/rte_zuc_pmd.c
@@ -478,7 +478,6 @@ cryptodev_zuc_create(const char *name,
internals = dev->data->dev_private;
internals->max_nb_queue_pairs = init_params->max_nb_queue_pairs;
- internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
init_error:
@@ -496,8 +495,7 @@ cryptodev_zuc_probe(struct rte_vdev_device *vdev)
"",
sizeof(struct zuc_private),
rte_socket_id(),
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS,
- RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS
+ RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS
};
const char *name;
const char *input_args;
@@ -540,7 +538,6 @@ static struct cryptodev_driver zuc_crypto_drv;
RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_ZUC_PMD, cryptodev_zuc_pmd_drv);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_ZUC_PMD,
"max_nb_queue_pairs=<int> "
- "max_nb_sessions=<int> "
"socket_id=<int>");
RTE_PMD_REGISTER_CRYPTO_DRIVER(zuc_crypto_drv, cryptodev_zuc_pmd_drv.driver,
cryptodev_driver_id);
diff --git a/drivers/crypto/zuc/rte_zuc_pmd_ops.c b/drivers/crypto/zuc/rte_zuc_pmd_ops.c
index 87c44ceb9..e151750fb 100644
--- a/drivers/crypto/zuc/rte_zuc_pmd_ops.c
+++ b/drivers/crypto/zuc/rte_zuc_pmd_ops.c
@@ -130,7 +130,8 @@ zuc_pmd_info_get(struct rte_cryptodev *dev,
if (dev_info != NULL) {
dev_info->driver_id = dev->driver_id;
dev_info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
- dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+ /* No limit of number of sessions */
+ dev_info->sym.max_nb_sessions = 0;
dev_info->feature_flags = dev->feature_flags;
dev_info->capabilities = zuc_pmd_capabilities;
}
diff --git a/drivers/crypto/zuc/rte_zuc_pmd_private.h b/drivers/crypto/zuc/rte_zuc_pmd_private.h
index 69cc32e54..5e5906ddb 100644
--- a/drivers/crypto/zuc/rte_zuc_pmd_private.h
+++ b/drivers/crypto/zuc/rte_zuc_pmd_private.h
@@ -24,8 +24,6 @@ int zuc_logtype_driver;
struct zuc_private {
unsigned max_nb_queue_pairs;
/**< Max number of queue pairs supported by device */
- unsigned max_nb_sessions;
- /**< Max number of sessions supported by device */
};
/** ZUC buffer queue pair */
diff --git a/lib/librte_cryptodev/rte_cryptodev_pmd.c b/lib/librte_cryptodev/rte_cryptodev_pmd.c
index f2aac24b7..2088ac3f3 100644
--- a/lib/librte_cryptodev/rte_cryptodev_pmd.c
+++ b/lib/librte_cryptodev/rte_cryptodev_pmd.c
@@ -65,13 +65,6 @@ rte_cryptodev_pmd_parse_input_args(
if (ret < 0)
goto free_kvlist;
- ret = rte_kvargs_process(kvlist,
- RTE_CRYPTODEV_PMD_MAX_NB_SESS_ARG,
- &rte_cryptodev_pmd_parse_uint_arg,
- ¶ms->max_nb_sessions);
- if (ret < 0)
- goto free_kvlist;
-
ret = rte_kvargs_process(kvlist,
RTE_CRYPTODEV_PMD_SOCKET_ID_ARG,
&rte_cryptodev_pmd_parse_uint_arg,
@@ -109,10 +102,9 @@ rte_cryptodev_pmd_create(const char *name,
device->driver->name, name);
CDEV_LOG_INFO("[%s] - Initialisation parameters - name: %s,"
- "socket id: %d, max queue pairs: %u, max sessions: %u",
+ "socket id: %d, max queue pairs: %u",
device->driver->name, name,
- params->socket_id, params->max_nb_queue_pairs,
- params->max_nb_sessions);
+ params->socket_id, params->max_nb_queue_pairs);
/* allocate device structure */
cryptodev = rte_cryptodev_pmd_allocate(name, params->socket_id);
diff --git a/lib/librte_cryptodev/rte_cryptodev_pmd.h b/lib/librte_cryptodev/rte_cryptodev_pmd.h
index db8b97665..1fb7e7d5e 100644
--- a/lib/librte_cryptodev/rte_cryptodev_pmd.h
+++ b/lib/librte_cryptodev/rte_cryptodev_pmd.h
@@ -32,18 +32,15 @@ extern "C" {
#define RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS 8
-#define RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_SESSIONS 2048
#define RTE_CRYPTODEV_PMD_NAME_ARG ("name")
#define RTE_CRYPTODEV_PMD_MAX_NB_QP_ARG ("max_nb_queue_pairs")
-#define RTE_CRYPTODEV_PMD_MAX_NB_SESS_ARG ("max_nb_sessions")
#define RTE_CRYPTODEV_PMD_SOCKET_ID_ARG ("socket_id")
static const char * const cryptodev_pmd_valid_params[] = {
RTE_CRYPTODEV_PMD_NAME_ARG,
RTE_CRYPTODEV_PMD_MAX_NB_QP_ARG,
- RTE_CRYPTODEV_PMD_MAX_NB_SESS_ARG,
RTE_CRYPTODEV_PMD_SOCKET_ID_ARG
};
@@ -56,7 +53,6 @@ struct rte_cryptodev_pmd_init_params {
size_t private_data_size;
int socket_id;
unsigned int max_nb_queue_pairs;
- unsigned int max_nb_sessions;
};
/** Global structure used for maintaining state of allocated crypto devices */
--
2.14.4
next prev parent reply other threads:[~2018-07-04 16:58 UTC|newest]
Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-08 22:02 [dpdk-dev] [PATCH 0/6] Cryptodev API changes Pablo de Lara
2018-06-08 22:02 ` [dpdk-dev] [PATCH 1/6] cryptodev: replace bus specific struct with generic dev Pablo de Lara
2018-06-21 12:43 ` Akhil Goyal
2018-06-08 22:02 ` [dpdk-dev] [PATCH 2/6] cryptodev: remove max number of sessions per queue Pablo de Lara
2018-06-21 13:03 ` Akhil Goyal
2018-06-08 22:02 ` [dpdk-dev] [PATCH 3/6] cryptodev: remove max number of sessions Pablo de Lara
2018-06-12 11:37 ` Tomasz Duszynski
2018-06-12 13:53 ` De Lara Guarch, Pablo
2018-06-13 6:11 ` Tomasz Duszynski
2018-06-13 8:23 ` De Lara Guarch, Pablo
2018-06-13 10:11 ` Tomasz Duszynski
2018-06-19 13:20 ` Trahe, Fiona
2018-06-25 16:42 ` De Lara Guarch, Pablo
2018-06-08 22:02 ` [dpdk-dev] [PATCH 4/6] cryptodev: remove queue start/stop functions Pablo de Lara
2018-06-21 12:50 ` Akhil Goyal
2018-06-08 22:02 ` [dpdk-dev] [PATCH 5/6] cryptodev: remove old get session size functions Pablo de Lara
2018-06-21 12:59 ` Akhil Goyal
2018-06-22 17:02 ` Verma, Shally
2018-06-25 16:40 ` De Lara Guarch, Pablo
2018-06-26 5:28 ` Verma, Shally
2018-06-26 8:17 ` De Lara Guarch, Pablo
2018-06-08 22:02 ` [dpdk-dev] [PATCH 6/6] cryptodev: replace mbuf scatter gather flag Pablo de Lara
2018-06-18 6:29 ` Akhil Goyal
2018-06-25 16:43 ` De Lara Guarch, Pablo
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 00/15] Cryptodev API changes for 18.08 Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 01/15] cryptodev: replace bus specific struct with generic dev Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 02/15] cryptodev: remove max number of sessions per queue Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 03/15] app/crypto-perf: limit number of sessions Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 04/15] test/crypto: " Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 05/15] examples/l2fwd-crypto: " Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 06/15] examples/ipsec-secgw: check for max supported sessions Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 07/15] crypto/mvsam: parse max number of sessions Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 08/15] cryptodev: define value for unlimited sessions Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 09/15] cryptodev: remove max number of sessions parameter Pablo de Lara
2018-06-29 8:02 ` Tomasz Duszynski
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 10/15] doc: remove unneeded deprecation notice Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 11/15] cryptodev: remove queue start/stop functions Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 12/15] cryptodev: remove old get session size functions Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 13/15] cryptodev: replace mbuf scatter gather flag Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 14/15] cryptodev: remove attach/detach session API Pablo de Lara
2018-06-25 8:48 ` [dpdk-dev] [PATCH v2 15/15] cryptodev: rename PMD symmetric " Pablo de Lara
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 00/16] Cryptodev API changes for 18.08 Pablo de Lara
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 01/16] cryptodev: replace bus specific struct with generic dev Pablo de Lara
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 02/16] cryptodev: remove max number of sessions per queue Pablo de Lara
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 03/16] app/crypto-perf: limit number of sessions Pablo de Lara
2018-07-04 12:13 ` Akhil Goyal
2018-07-04 12:15 ` Akhil Goyal
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 04/16] test/crypto: " Pablo de Lara
2018-07-04 12:21 ` Akhil Goyal
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 05/16] examples/l2fwd-crypto: " Pablo de Lara
2018-07-04 12:04 ` Akhil Goyal
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 06/16] examples/ipsec-secgw: check for max supported sessions Pablo de Lara
2018-07-04 12:30 ` Akhil Goyal
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 07/16] crypto/mvsam: parse max number of sessions Pablo de Lara
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 08/16] cryptodev: define value for unlimited sessions Pablo de Lara
2018-07-04 12:40 ` Akhil Goyal
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 09/16] cryptodev: remove max number of sessions parameter Pablo de Lara
2018-06-29 8:04 ` Tomasz Duszynski
2018-07-02 10:58 ` De Lara Guarch, Pablo
2018-07-04 12:42 ` Akhil Goyal
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 10/16] doc: remove unneeded deprecation notice Pablo de Lara
2018-07-04 11:29 ` Akhil Goyal
2018-06-28 0:52 ` [dpdk-dev] [PATCH v3 11/16] cryptodev: remove queue start/stop functions Pablo de Lara
2018-06-28 0:53 ` [dpdk-dev] [PATCH v3 12/16] cryptodev: remove old get session size functions Pablo de Lara
2018-07-04 11:31 ` Akhil Goyal
2018-06-28 0:53 ` [dpdk-dev] [PATCH v3 13/16] cryptodev: replace mbuf scatter gather flag Pablo de Lara
2018-07-04 12:57 ` Akhil Goyal
2018-07-04 15:53 ` De Lara Guarch, Pablo
2018-06-28 0:53 ` [dpdk-dev] [PATCH v3 14/16] cryptodev: remove attach/detach session API Pablo de Lara
2018-07-04 11:33 ` Akhil Goyal
2018-06-28 0:53 ` [dpdk-dev] [PATCH v3 15/16] cryptodev: rename PMD symmetric " Pablo de Lara
2018-07-04 11:36 ` Akhil Goyal
2018-06-28 0:53 ` [dpdk-dev] [PATCH v3 16/16] cryptodev: check if symmetric sessions are supported Pablo de Lara
2018-06-28 13:40 ` Verma, Shally
2018-06-28 14:15 ` De Lara Guarch, Pablo
2018-07-04 12:27 ` Akhil Goyal
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 00/16] Cryptodev API changes Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 01/16] cryptodev: replace bus specific struct with generic dev Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 02/16] cryptodev: remove max number of sessions per queue Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 03/16] app/crypto-perf: limit number of sessions Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 04/16] test/crypto: " Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 05/16] examples/l2fwd-crypto: " Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 06/16] examples/ipsec-secgw: check for max supported sessions Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 07/16] crypto/mvsam: parse max number of sessions Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 08/16] cryptodev: define value for unlimited sessions Pablo de Lara
2018-07-04 8:51 ` Pablo de Lara [this message]
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 10/16] doc: remove unneeded deprecation notice Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 11/16] cryptodev: remove queue start/stop functions Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 12/16] cryptodev: remove old get session size functions Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 13/16] cryptodev: replace mbuf scatter gather flag Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 14/16] cryptodev: remove attach/detach session API Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 15/16] cryptodev: rename PMD symmetric " Pablo de Lara
2018-07-04 8:51 ` [dpdk-dev] [PATCH v4 16/16] cryptodev: check if symmetric sessions are supported Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 00/16] Cryptodev API changes Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 01/16] cryptodev: replace bus specific struct with generic dev Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 02/16] cryptodev: remove max number of sessions per queue Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 03/16] app/crypto-perf: limit number of sessions Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 04/16] test/crypto: " Pablo de Lara
2018-07-05 11:27 ` Verma, Shally
2018-07-05 11:30 ` Akhil Goyal
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 05/16] examples/l2fwd-crypto: " Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 06/16] examples/ipsec-secgw: check for max supported sessions Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 07/16] crypto/mvsam: parse max number of sessions Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 08/16] cryptodev: define value for unlimited sessions Pablo de Lara
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 09/16] cryptodev: remove max number of sessions parameter Pablo de Lara
2018-07-09 10:53 ` De Lara Guarch, Pablo
2018-07-05 2:07 ` [dpdk-dev] [PATCH v5 10/16] doc: remove unneeded deprecation notice Pablo de Lara
2018-07-05 2:08 ` [dpdk-dev] [PATCH v5 11/16] cryptodev: remove queue start/stop functions Pablo de Lara
2018-07-05 2:08 ` [dpdk-dev] [PATCH v5 12/16] cryptodev: remove old get session size functions Pablo de Lara
2018-07-05 2:08 ` [dpdk-dev] [PATCH v5 13/16] cryptodev: replace mbuf scatter gather flag Pablo de Lara
2018-07-05 11:35 ` Akhil Goyal
2018-07-05 2:08 ` [dpdk-dev] [PATCH v5 14/16] cryptodev: remove attach/detach session API Pablo de Lara
2018-07-05 2:08 ` [dpdk-dev] [PATCH v5 15/16] cryptodev: rename PMD symmetric " Pablo de Lara
2018-07-05 2:08 ` [dpdk-dev] [PATCH v5 16/16] cryptodev: check if symmetric sessions are supported Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 00/16] Cryptodev API changes Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 01/16] cryptodev: replace bus specific struct with generic dev Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 02/16] cryptodev: remove max number of sessions per queue Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 03/16] app/crypto-perf: limit number of sessions Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 04/16] test/crypto: " Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 05/16] examples/l2fwd-crypto: " Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 06/16] examples/ipsec-secgw: check for max supported sessions Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 07/16] crypto/mvsam: parse max number of sessions Pablo de Lara
2018-07-10 10:42 ` Tomasz Duszynski
2018-07-10 10:45 ` De Lara Guarch, Pablo
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 08/16] cryptodev: define value for unlimited sessions Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 09/16] cryptodev: remove max number of sessions parameter Pablo de Lara
2018-07-10 8:46 ` Akhil Goyal
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 10/16] doc: remove unneeded deprecation notice Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 11/16] cryptodev: remove queue start/stop functions Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 12/16] cryptodev: remove old get session size functions Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 13/16] cryptodev: replace mbuf scatter gather flag Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 14/16] cryptodev: remove attach/detach session API Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 15/16] cryptodev: rename PMD symmetric " Pablo de Lara
2018-07-10 0:36 ` [dpdk-dev] [PATCH v6 16/16] cryptodev: check if symmetric sessions are supported Pablo de Lara
2018-07-10 11:00 ` [dpdk-dev] [PATCH v6 00/16] Cryptodev API changes De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180704085154.37828-10-pablo.de.lara.guarch@intel.com \
--to=pablo.de.lara.guarch@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=jianjay.zhou@huawei.com \
--cc=ravi1.kumar@amd.com \
--cc=roy.fan.zhang@intel.com \
--cc=shally.verma@caviumnetworks.com \
--cc=tdu@semihalf.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).