From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mellanox.co.il (mail-il-dmz.mellanox.com [193.47.165.129]) by dpdk.org (Postfix) with ESMTP id D6E913798 for ; Wed, 15 Aug 2018 14:28:33 +0200 (CEST) Received: from Internal Mail-Server by MTLPINE1 (envelope-from shahafs@mellanox.com) with ESMTPS (AES256-SHA encrypted); 15 Aug 2018 15:21:38 +0300 Received: from unicorn01.mtl.labs.mlnx. (unicorn01.mtl.labs.mlnx [10.7.12.62]) by labmailer.mlnx (8.13.8/8.13.8) with ESMTP id w7FCHvft014599; Wed, 15 Aug 2018 15:17:57 +0300 From: Shahaf Shuler To: yskoh@mellanox.com Cc: dev@dpdk.org, rasland@mellanox.com, erezf@mellanox.com, alialnu@mellanox.com, wisamm@mellanox.com, olgas@mellanox.com, stable@dpdk.org Date: Wed, 15 Aug 2018 15:17:30 +0300 Message-Id: <20180815121730.87525-1-shahafs@mellanox.com> X-Mailer: git-send-email 2.12.0 In-Reply-To: <20180813070018.101262-1-shahafs@mellanox.com> References: <20180813070018.101262-1-shahafs@mellanox.com> Subject: [dpdk-dev] [PATCH v2] net/mlx5: disable ConnectX-4 Lx Multi Packet Send by default X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 15 Aug 2018 12:28:34 -0000 On ConnectX-4 Lx the Multi Packet Send (MPW) feature is considered un-secure, as on some cases were the application provides incorrect mbufs on the Tx burst the host or NIC can get stuck. Hence, disabling the feature by default for this specific NIC. Users can still enable this feature and enjoy the performance gain (mostly for low number of cores) by using the txq_mpw_en devarg. This patch will impact the out of the box performance of some application using ConnectX-4 Lx for the sack of security and robustness. Since we need different defaults based on the underlying device the mpw field in the configuration struct was extended to contain also the MLX5_ARG_UNSET option. Cc: stable@dpdk.org Signed-off-by: Shahaf Shuler --- doc/guides/nics/mlx5.rst | 7 ++++++- drivers/net/mlx5/mlx5.c | 20 +++++++++++--------- drivers/net/mlx5/mlx5.h | 2 +- 3 files changed, 18 insertions(+), 11 deletions(-) diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index 52e1213cf5..dbdb90b59b 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -339,7 +339,12 @@ Run-time configuration When those offloads are requested the MPS send function will not be used. It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield - families of adapters. Enabled by default. + families of adapters. + On ConnectX-4 Lx the MPW is considered un-secure hence disabled by default. + Users which enable the MPW should be aware that application which provides incorrect + mbuf descriptors in the Tx burst can lead to serious errors in the host including, on some cases, + NIC to get stuck. + On ConnectX-5 and Bluefield the MPW is secure and enabled by default. - ``txq_mpw_hdr_dseg_en`` parameter [int] diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index ec63bc6e22..30d4e70a77 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -477,7 +477,7 @@ mlx5_args_check(const char *key, const char *val, void *opaque) } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) { config->txqs_inline = tmp; } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) { - config->mps = !!tmp ? config->mps : 0; + config->mps = !!tmp; } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) { config->mpw_hdr_dseg = !!tmp; } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) { @@ -702,6 +702,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev, struct mlx5dv_context dv_attr = { .comp_mask = 0 }; struct mlx5_dev_config config = { .vf = !!vf, + .mps = MLX5_ARG_UNSET, .tx_vec_en = 1, .rx_vec_en = 1, .mpw_hdr_dseg = 0, @@ -791,7 +792,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev, DRV_LOG(DEBUG, "MPW isn't supported"); mps = MLX5_MPW_DISABLED; } - config.mps = mps; #ifdef HAVE_IBV_MLX5_MOD_SWP if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP) swp = dv_attr.sw_parsing_caps.sw_parsing_offloads; @@ -1035,13 +1035,15 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev, (1 << IBV_QPT_RAW_PACKET))); if (config.tso) config.tso_max_payload_sz = attr.tso_caps.max_tso; - if (config.mps && !mps) { - DRV_LOG(ERR, - "multi-packet send not supported on this device" - " (" MLX5_TXQ_MPW_EN ")"); - err = ENOTSUP; - goto error; - } + /* + * MPW is disabled by default, while the Enhanced MPW is enabled + * by default. + */ + if (config.mps == MLX5_ARG_UNSET) + config.mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED : + MLX5_MPW_DISABLED; + else + config.mps = config.mps ? mps : MLX5_MPW_DISABLED; DRV_LOG(INFO, "%sMPS is %s", config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "", config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled"); diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index a3a34cffd8..35a196e76d 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -99,7 +99,6 @@ struct mlx5_dev_config { unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */ unsigned int hw_padding:1; /* End alignment padding is supported. */ unsigned int vf:1; /* This is a VF. */ - unsigned int mps:2; /* Multi-packet send supported mode. */ unsigned int tunnel_en:1; /* Whether tunnel stateless offloads are supported. */ unsigned int mpls_en:1; /* MPLS over GRE/UDP is enabled. */ @@ -122,6 +121,7 @@ struct mlx5_dev_config { unsigned int min_rxqs_num; /* Rx queue count threshold to enable MPRQ. */ } mprq; /* Configurations for Multi-Packet RQ. */ + int mps; /* Multi-packet send supported mode. */ unsigned int flow_prio; /* Number of flow priorities. */ unsigned int tso_max_payload_sz; /* Maximum TCP payload for TSO. */ unsigned int ind_table_max_size; /* Maximum indirection table size. */ -- 2.12.0