* [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate
@ 2018-08-15 14:14 Luca Boccassi
2018-09-26 10:21 ` Luca Boccassi
2018-11-07 9:17 ` Zhao1, Wei
0 siblings, 2 replies; 7+ messages in thread
From: Luca Boccassi @ 2018-08-15 14:14 UTC (permalink / raw)
To: dev; +Cc: wenzhuo.lu, konstantin.ananyev, Luca Boccassi, stable
We have observed high rate of NIC PF interrupts when VNF is using DPDK
APIs rte_eth_link_get_nowait() and rte_eth_link_get() functions, as
they are causing VF driver to send many MBOX ACK messages.
With these changes, the interrupt rates go down significantly. Here's
some testing results:
Without the patch:
$ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15
34: 88 0 0 0 0 41 30 509 0 0 350 24 88 114 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0
35: 49 24 0 0 65 130 64 29 67 0 10 0 0 46 38 764 PCI-MSI 1572865-edge ens1f0-TxRx-1
36: 53 0 0 64 15 85 132 71 108 0 30 0 165 215 303 104 PCI-MSI 1572866-edge ens1f0-TxRx-2
37: 46 196 0 0 10 48 62 68 51 0 0 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3
38: 226 0 0 0 159 145 749 265 0 0 202 0 69229 166 450 0 PCI-MSI 1572868-edge ens1f0
52: 95 896 0 0 0 18 53 0 494 0 0 0 0 265 79 124 PCI-MSI 1574912-edge ens1f1-TxRx-0
53: 50 0 18 0 72 33 0 168 330 0 0 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1
54: 65 0 0 0 239 104 166 49 442 0 0 0 126 26 307 0 PCI-MSI 1574914-edge ens1f1-TxRx-2
55: 57 0 0 0 123 35 83 54 157 106 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1-TxRx-3
56: 232 0 13910 0 16 21 0 54422 0 0 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15
34: 88 0 0 0 0 41 30 509 0 0 350 24 88 119 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0
35: 49 24 0 0 65 130 64 29 67 0 10 0 0 46 38 771 PCI-MSI 1572865-edge ens1f0-TxRx-1
36: 53 0 0 64 15 85 132 71 108 0 30 0 165 215 303 113 PCI-MSI 1572866-edge ens1f0-TxRx-2
37: 46 196 0 0 10 48 62 68 56 0 0 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3
38: 226 0 0 0 159 145 749 265 0 0 202 0 71281 166 450 0 PCI-MSI 1572868-edge ens1f0
52: 95 896 0 0 0 18 53 0 494 0 0 0 0 265 79 133 PCI-MSI 1574912-edge ens1f1-TxRx-0
53: 50 0 18 0 72 33 0 173 330 0 0 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1
54: 65 0 0 0 239 104 166 49 442 0 0 0 126 26 312 0 PCI-MSI 1574914-edge ens1f1-TxRx-2
55: 57 0 0 0 123 35 83 59 157 106 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1-TxRx-3
56: 232 0 15910 0 16 21 0 54422 0 0 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1
During the 10s interval, CPU2 jumped by 2000 interrupts, CPU12 by 2051
interrupts, for about 200 interrupts/second. That's on the order of
what we expect. I would have guessed 100/s but perhaps there are two
mailbox messages.
With the patch:
$ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15
34: 88 0 0 0 0 25 19 177 0 0 350 24 88 100 362 559 PCI-MSI 1572864-edge ens1f0-TxRx-0
35: 49 19 0 0 65 130 64 29 67 0 10 0 0 46 38 543 PCI-MSI 1572865-edge ens1f0-TxRx-1
36: 53 0 0 64 15 53 85 71 108 0 24 0 85 215 292 31 PCI-MSI 1572866-edge ens1f0-TxRx-2
37: 46 196 0 0 10 43 57 39 19 0 0 0 78 69 49 149 PCI-MSI 1572867-edge ens1f0-TxRx-3
38: 226 0 0 0 159 145 749 247 0 0 202 0 58250 0 450 0 PCI-MSI 1572868-edge ens1f0
52: 95 896 0 0 0 18 53 0 189 0 0 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0
53: 50 0 18 0 72 33 0 90 330 0 0 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1
54: 65 0 0 0 10 104 166 49 442 0 0 0 126 26 226 0 PCI-MSI 1574914-edge ens1f1-TxRx-2
55: 57 0 0 0 61 35 83 30 157 101 0 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3
56: 232 0 2062 0 16 21 0 54422 0 0 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15
34: 88 0 0 0 0 25 19 177 0 0 350 24 88 102 362 562 PCI-MSI 1572864-edge ens1f0-TxRx-0
35: 49 19 0 0 65 130 64 29 67 0 10 0 0 46 38 548 PCI-MSI 1572865-edge ens1f0-TxRx-1
36: 53 0 0 64 15 53 85 71 108 0 24 0 85 215 292 36 PCI-MSI 1572866-edge ens1f0-TxRx-2
37: 46 196 0 0 10 45 57 39 19 0 0 0 78 69 49 152 PCI-MSI 1572867-edge ens1f0-TxRx-3
38: 226 0 0 0 159 145 749 247 0 0 202 0 58259 0 450 0 PCI-MSI 1572868-edge ens1f0
52: 95 896 0 0 0 18 53 0 194 0 0 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0
53: 50 0 18 0 72 33 0 95 330 0 0 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1
54: 65 0 0 0 10 104 166 49 442 0 0 0 126 26 231 0 PCI-MSI 1574914-edge ens1f1-TxRx-2
55: 57 0 0 0 66 35 83 30 157 101 0 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3
56: 232 0 2071 0 16 21 0 54422 0 0 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1
Note the interrupt rate has gone way down. During the 10s interval, we
only saw a handful of interrupts.
Note that this patch was originally provided by Intel directly to AT&T
and Vyatta, but unfortunately I am unable to find records of the exact
author.
We have been using this in production for more than a year.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
---
drivers/net/ixgbe/base/ixgbe_vf.c | 33 ++++++++++++++++---------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c b/drivers/net/ixgbe/base/ixgbe_vf.c
index 5b25a6b4d4..16086670b1 100644
--- a/drivers/net/ixgbe/base/ixgbe_vf.c
+++ b/drivers/net/ixgbe/base/ixgbe_vf.c
@@ -586,7 +586,6 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
s32 ret_val = IXGBE_SUCCESS;
u32 links_reg;
u32 in_msg = 0;
- UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
/* If we were hit with a reset drop the link */
if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout)
@@ -643,23 +642,25 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
*speed = IXGBE_LINK_SPEED_UNKNOWN;
}
- /* if the read failed it could just be a mailbox collision, best wait
- * until we are called again and don't report an error
- */
- if (mbx->ops.read(hw, &in_msg, 1, 0))
- goto out;
+ if (autoneg_wait_to_complete) {
+ /* if the read failed it could just be a mailbox collision, best wait
+ * until we are called again and don't report an error
+ */
+ if (mbx->ops.read(hw, &in_msg, 1, 0))
+ goto out;
- if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
- /* msg is not CTS and is NACK we must have lost CTS status */
- if (in_msg & IXGBE_VT_MSGTYPE_NACK)
+ if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
+ /* msg is not CTS and is NACK we must have lost CTS status */
+ if (in_msg & IXGBE_VT_MSGTYPE_NACK)
+ ret_val = -1;
+ goto out;
+ }
+
+ /* the pf is talking, if we timed out in the past we reinit */
+ if (!mbx->timeout) {
ret_val = -1;
- goto out;
- }
-
- /* the pf is talking, if we timed out in the past we reinit */
- if (!mbx->timeout) {
- ret_val = -1;
- goto out;
+ goto out;
+ }
}
/* if we passed all the tests above then the link is up and we no
--
2.18.0
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate 2018-08-15 14:14 [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate Luca Boccassi @ 2018-09-26 10:21 ` Luca Boccassi 2018-11-07 9:17 ` Zhao1, Wei 1 sibling, 0 replies; 7+ messages in thread From: Luca Boccassi @ 2018-09-26 10:21 UTC (permalink / raw) To: dev; +Cc: wenzhuo.lu, konstantin.ananyev, stable, ferruh.yigit On Wed, 2018-08-15 at 15:14 +0100, Luca Boccassi wrote: > We have observed high rate of NIC PF interrupts when VNF is using > DPDK > APIs rte_eth_link_get_nowait() and rte_eth_link_get() functions, as > they are causing VF driver to send many MBOX ACK messages. Ping. Any chance this could be reviewed? Thanks! -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate 2018-08-15 14:14 [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate Luca Boccassi 2018-09-26 10:21 ` Luca Boccassi @ 2018-11-07 9:17 ` Zhao1, Wei 2018-11-07 18:54 ` Chas Williams 1 sibling, 1 reply; 7+ messages in thread From: Zhao1, Wei @ 2018-11-07 9:17 UTC (permalink / raw) To: Luca Boccassi, dev; +Cc: Lu, Wenzhuo, Ananyev, Konstantin, stable Hi, Luca Boccassi The purpose of this patch is to reduce the mailbox interrupt from vf to pf, but there seem some point need for discussion in this patch. First, I do not know why do you change code of function ixgbe_check_mac_link_vf(), because in rte_eth_link_get_nowait() and rte_eth_link_get(), it will call ixgbe_dev_link_update()->ixgbe_dev_link_update_share()-> ixgbevf_check_link() for VF, NOT ixgbe_check_mac_link_vf() in your patch! Second, in function ixgbevf_check_link(), there is mailbox message read operation for vf, " if (mbx->ops.read(hw, &in_msg, 1, 0))", that is ixgbe_read_mbx_vf() , This will cause interrupt from vf to pf, this is just the point of this patch, it is also the problem that you want to solve. So, you use autoneg_wait_to_complete flag to control this mailbox message read operation, maybe you will use rte_eth_link_get_nowait(), Which set autoneg_wait_to_complete = 0, then the interrupt from vf to pf can be reduced. But I do not think this patch is necessary, because in ixgbevf_check_link(), it,has " bool no_pflink_check = wait_to_complete == 0; //////////////////////// if (no_pflink_check) { if (*speed == IXGBE_LINK_SPEED_UNKNOWN) mac->get_link_status = true; else mac->get_link_status = false; goto out; } " Comment of "for a quick link status checking, wait_to_compelet == 0, skip PF link status checking " is clear. That means in rte_eth_link_get_nowait(), code will skip this mailbox read interrupt, only in rte_eth_link_get() there will be this interrupt, so I think what you need to is just replace rte_eth_link_get() with rte_eth_link_get_nowait() in your APP, that will reduce interrupt from vf to pf in mailbox read. > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Luca Boccassi > Sent: Wednesday, August 15, 2018 10:15 PM > To: dev@dpdk.org > Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin > <konstantin.ananyev@intel.com>; Luca Boccassi <bluca@debian.org>; > stable@dpdk.org > Subject: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate > > We have observed high rate of NIC PF interrupts when VNF is using DPDK > APIs rte_eth_link_get_nowait() and rte_eth_link_get() functions, as they > are causing VF driver to send many MBOX ACK messages. > > With these changes, the interrupt rates go down significantly. Here's some > testing results: > > Without the patch: > > $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' > /proc/interrupts > CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 > 34: 88 0 0 0 0 41 30 509 0 0 350 > 24 88 114 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 > 35: 49 24 0 0 65 130 64 29 67 0 10 > 0 0 46 38 764 PCI-MSI 1572865-edge ens1f0-TxRx-1 > 36: 53 0 0 64 15 85 132 71 108 0 > 30 0 165 215 303 104 PCI-MSI 1572866-edge ens1f0- > TxRx-2 > 37: 46 196 0 0 10 48 62 68 51 0 0 > 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3 > 38: 226 0 0 0 159 145 749 265 0 0 > 202 0 69229 166 450 0 PCI-MSI 1572868-edge ens1f0 > 52: 95 896 0 0 0 18 53 0 494 0 0 > 0 0 265 79 124 PCI-MSI 1574912-edge ens1f1-TxRx-0 > 53: 50 0 18 0 72 33 0 168 330 0 0 > 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1 > 54: 65 0 0 0 239 104 166 49 442 0 > 0 0 126 26 307 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 > 55: 57 0 0 0 123 35 83 54 157 106 > 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1-TxRx-3 > 56: 232 0 13910 0 16 21 0 54422 0 0 > 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 > CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 > 34: 88 0 0 0 0 41 30 509 0 0 350 > 24 88 119 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 > 35: 49 24 0 0 65 130 64 29 67 0 10 > 0 0 46 38 771 PCI-MSI 1572865-edge ens1f0-TxRx-1 > 36: 53 0 0 64 15 85 132 71 108 0 > 30 0 165 215 303 113 PCI-MSI 1572866-edge ens1f0- > TxRx-2 > 37: 46 196 0 0 10 48 62 68 56 0 0 > 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3 > 38: 226 0 0 0 159 145 749 265 0 0 > 202 0 71281 166 450 0 PCI-MSI 1572868-edge ens1f0 > 52: 95 896 0 0 0 18 53 0 494 0 0 > 0 0 265 79 133 PCI-MSI 1574912-edge ens1f1-TxRx-0 > 53: 50 0 18 0 72 33 0 173 330 0 0 > 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1 > 54: 65 0 0 0 239 104 166 49 442 0 > 0 0 126 26 312 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 > 55: 57 0 0 0 123 35 83 59 157 106 > 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1-TxRx-3 > 56: 232 0 15910 0 16 21 0 54422 0 0 > 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 > > During the 10s interval, CPU2 jumped by 2000 interrupts, CPU12 by 2051 > interrupts, for about 200 interrupts/second. That's on the order of what we > expect. I would have guessed 100/s but perhaps there are two mailbox > messages. > > With the patch: > > $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' > /proc/interrupts > CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 > 34: 88 0 0 0 0 25 19 177 0 0 350 > 24 88 100 362 559 PCI-MSI 1572864-edge ens1f0-TxRx-0 > 35: 49 19 0 0 65 130 64 29 67 0 10 > 0 0 46 38 543 PCI-MSI 1572865-edge ens1f0-TxRx-1 > 36: 53 0 0 64 15 53 85 71 108 0 24 > 0 85 215 292 31 PCI-MSI 1572866-edge ens1f0-TxRx-2 > 37: 46 196 0 0 10 43 57 39 19 0 0 > 0 78 69 49 149 PCI-MSI 1572867-edge ens1f0-TxRx-3 > 38: 226 0 0 0 159 145 749 247 0 0 > 202 0 58250 0 450 0 PCI-MSI 1572868-edge ens1f0 > 52: 95 896 0 0 0 18 53 0 189 0 0 > 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0 > 53: 50 0 18 0 72 33 0 90 330 0 0 > 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1 > 54: 65 0 0 0 10 104 166 49 442 0 0 > 0 126 26 226 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 > 55: 57 0 0 0 61 35 83 30 157 101 0 > 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3 > 56: 232 0 2062 0 16 21 0 54422 0 0 > 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 > CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 > 34: 88 0 0 0 0 25 19 177 0 0 350 > 24 88 102 362 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 > 35: 49 19 0 0 65 130 64 29 67 0 10 > 0 0 46 38 548 PCI-MSI 1572865-edge ens1f0-TxRx-1 > 36: 53 0 0 64 15 53 85 71 108 0 24 > 0 85 215 292 36 PCI-MSI 1572866-edge ens1f0-TxRx-2 > 37: 46 196 0 0 10 45 57 39 19 0 0 > 0 78 69 49 152 PCI-MSI 1572867-edge ens1f0-TxRx-3 > 38: 226 0 0 0 159 145 749 247 0 0 > 202 0 58259 0 450 0 PCI-MSI 1572868-edge ens1f0 > 52: 95 896 0 0 0 18 53 0 194 0 0 > 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0 > 53: 50 0 18 0 72 33 0 95 330 0 0 > 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1 > 54: 65 0 0 0 10 104 166 49 442 0 0 > 0 126 26 231 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 > 55: 57 0 0 0 66 35 83 30 157 101 0 > 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3 > 56: 232 0 2071 0 16 21 0 54422 0 0 > 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 > > Note the interrupt rate has gone way down. During the 10s interval, we only > saw a handful of interrupts. > > Note that this patch was originally provided by Intel directly to AT&T and > Vyatta, but unfortunately I am unable to find records of the exact author. > > We have been using this in production for more than a year. > > Fixes: af75078fece3 ("first public release") > Cc: stable@dpdk.org > > Signed-off-by: Luca Boccassi <bluca@debian.org> > --- > drivers/net/ixgbe/base/ixgbe_vf.c | 33 ++++++++++++++++--------------- > 1 file changed, 17 insertions(+), 16 deletions(-) > > diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c > b/drivers/net/ixgbe/base/ixgbe_vf.c > index 5b25a6b4d4..16086670b1 100644 > --- a/drivers/net/ixgbe/base/ixgbe_vf.c > +++ b/drivers/net/ixgbe/base/ixgbe_vf.c > @@ -586,7 +586,6 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, > ixgbe_link_speed *speed, > s32 ret_val = IXGBE_SUCCESS; > u32 links_reg; > u32 in_msg = 0; > - UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); > > /* If we were hit with a reset drop the link */ > if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout) @@ -643,23 > +642,25 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, > ixgbe_link_speed *speed, > *speed = IXGBE_LINK_SPEED_UNKNOWN; > } > > - /* if the read failed it could just be a mailbox collision, best wait > - * until we are called again and don't report an error > - */ > - if (mbx->ops.read(hw, &in_msg, 1, 0)) > - goto out; > + if (autoneg_wait_to_complete) { > + /* if the read failed it could just be a mailbox collision, best > wait > + * until we are called again and don't report an error > + */ > + if (mbx->ops.read(hw, &in_msg, 1, 0)) > + goto out; > > - if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { > - /* msg is not CTS and is NACK we must have lost CTS status > */ > - if (in_msg & IXGBE_VT_MSGTYPE_NACK) > + if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { > + /* msg is not CTS and is NACK we must have lost CTS > status */ > + if (in_msg & IXGBE_VT_MSGTYPE_NACK) > + ret_val = -1; > + goto out; > + } > + > + /* the pf is talking, if we timed out in the past we reinit */ > + if (!mbx->timeout) { > ret_val = -1; > - goto out; > - } > - > - /* the pf is talking, if we timed out in the past we reinit */ > - if (!mbx->timeout) { > - ret_val = -1; > - goto out; > + goto out; > + } > } > > /* if we passed all the tests above then the link is up and we no > -- > 2.18.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate 2018-11-07 9:17 ` Zhao1, Wei @ 2018-11-07 18:54 ` Chas Williams 2018-11-07 19:10 ` Luca Boccassi 2018-11-08 2:58 ` Zhao1, Wei 0 siblings, 2 replies; 7+ messages in thread From: Chas Williams @ 2018-11-07 18:54 UTC (permalink / raw) To: Zhao1, Wei, Luca Boccassi, dev; +Cc: Lu, Wenzhuo, Ananyev, Konstantin, stable On 11/07/2018 04:17 AM, Zhao1, Wei wrote: > Hi, Luca Boccassi > > The purpose of this patch is to reduce the mailbox interrupt from vf to pf, but there seem some point need for discussion in this patch. > > First, I do not know why do you change code of function ixgbe_check_mac_link_vf(), because in rte_eth_link_get_nowait() and rte_eth_link_get(), > it will call ixgbe_dev_link_update()->ixgbe_dev_link_update_share()-> ixgbevf_check_link() for VF, NOT ixgbe_check_mac_link_vf() in your patch! > > Second, in function ixgbevf_check_link(), there is mailbox message read operation for vf, > " if (mbx->ops.read(hw, &in_msg, 1, 0))", that is ixgbe_read_mbx_vf() , > This will cause interrupt from vf to pf, this is just the point of this patch, it is also the problem that you want to solve. > So, you use autoneg_wait_to_complete flag to control this mailbox message read operation, maybe you will use rte_eth_link_get_nowait(), Which set autoneg_wait_to_complete = 0, then the interrupt from vf to pf can be reduced. > > But I do not think this patch is necessary, because in ixgbevf_check_link(), it,has I think you are right here. This patch dates to before the addition of the vf argument to ixgbe_dev_link_update_share() and the split of .link_update between ixgbe and ixgbevf. At one point, this patch was especially beneficial if you were running bonding (which tends to make quite a few link status checks). So this patch probably hasn't been helping at this point. I will try to get some time to locally test this. > " > bool no_pflink_check = wait_to_complete == 0; > > //////////////////////// > > if (no_pflink_check) { > if (*speed == IXGBE_LINK_SPEED_UNKNOWN) > mac->get_link_status = true; > else > mac->get_link_status = false; > > goto out; > } > " > Comment of "for a quick link status checking, wait_to_compelet == 0, skip PF link status checking " is clear. > > That means in rte_eth_link_get_nowait(), code will skip this mailbox read interrupt, only in > rte_eth_link_get() there will be this interrupt, so I think what you need to is just replace > rte_eth_link_get() with rte_eth_link_get_nowait() in your APP, > that will reduce interrupt from vf to pf in mailbox read. > > >> -----Original Message----- >> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Luca Boccassi >> Sent: Wednesday, August 15, 2018 10:15 PM >> To: dev@dpdk.org >> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin >> <konstantin.ananyev@intel.com>; Luca Boccassi <bluca@debian.org>; >> stable@dpdk.org >> Subject: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate >> >> We have observed high rate of NIC PF interrupts when VNF is using DPDK >> APIs rte_eth_link_get_nowait() and rte_eth_link_get() functions, as they >> are causing VF driver to send many MBOX ACK messages. >> >> With these changes, the interrupt rates go down significantly. Here's some >> testing results: >> >> Without the patch: >> >> $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' >> /proc/interrupts >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 >> 34: 88 0 0 0 0 41 30 509 0 0 350 >> 24 88 114 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 >> 35: 49 24 0 0 65 130 64 29 67 0 10 >> 0 0 46 38 764 PCI-MSI 1572865-edge ens1f0-TxRx-1 >> 36: 53 0 0 64 15 85 132 71 108 0 >> 30 0 165 215 303 104 PCI-MSI 1572866-edge ens1f0- >> TxRx-2 >> 37: 46 196 0 0 10 48 62 68 51 0 0 >> 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3 >> 38: 226 0 0 0 159 145 749 265 0 0 >> 202 0 69229 166 450 0 PCI-MSI 1572868-edge ens1f0 >> 52: 95 896 0 0 0 18 53 0 494 0 0 >> 0 0 265 79 124 PCI-MSI 1574912-edge ens1f1-TxRx-0 >> 53: 50 0 18 0 72 33 0 168 330 0 0 >> 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1 >> 54: 65 0 0 0 239 104 166 49 442 0 >> 0 0 126 26 307 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 >> 55: 57 0 0 0 123 35 83 54 157 106 >> 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1-TxRx-3 >> 56: 232 0 13910 0 16 21 0 54422 0 0 >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 >> 34: 88 0 0 0 0 41 30 509 0 0 350 >> 24 88 119 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 >> 35: 49 24 0 0 65 130 64 29 67 0 10 >> 0 0 46 38 771 PCI-MSI 1572865-edge ens1f0-TxRx-1 >> 36: 53 0 0 64 15 85 132 71 108 0 >> 30 0 165 215 303 113 PCI-MSI 1572866-edge ens1f0- >> TxRx-2 >> 37: 46 196 0 0 10 48 62 68 56 0 0 >> 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3 >> 38: 226 0 0 0 159 145 749 265 0 0 >> 202 0 71281 166 450 0 PCI-MSI 1572868-edge ens1f0 >> 52: 95 896 0 0 0 18 53 0 494 0 0 >> 0 0 265 79 133 PCI-MSI 1574912-edge ens1f1-TxRx-0 >> 53: 50 0 18 0 72 33 0 173 330 0 0 >> 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1 >> 54: 65 0 0 0 239 104 166 49 442 0 >> 0 0 126 26 312 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 >> 55: 57 0 0 0 123 35 83 59 157 106 >> 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1-TxRx-3 >> 56: 232 0 15910 0 16 21 0 54422 0 0 >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 >> >> During the 10s interval, CPU2 jumped by 2000 interrupts, CPU12 by 2051 >> interrupts, for about 200 interrupts/second. That's on the order of what we >> expect. I would have guessed 100/s but perhaps there are two mailbox >> messages. >> >> With the patch: >> >> $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' >> /proc/interrupts >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 >> 34: 88 0 0 0 0 25 19 177 0 0 350 >> 24 88 100 362 559 PCI-MSI 1572864-edge ens1f0-TxRx-0 >> 35: 49 19 0 0 65 130 64 29 67 0 10 >> 0 0 46 38 543 PCI-MSI 1572865-edge ens1f0-TxRx-1 >> 36: 53 0 0 64 15 53 85 71 108 0 24 >> 0 85 215 292 31 PCI-MSI 1572866-edge ens1f0-TxRx-2 >> 37: 46 196 0 0 10 43 57 39 19 0 0 >> 0 78 69 49 149 PCI-MSI 1572867-edge ens1f0-TxRx-3 >> 38: 226 0 0 0 159 145 749 247 0 0 >> 202 0 58250 0 450 0 PCI-MSI 1572868-edge ens1f0 >> 52: 95 896 0 0 0 18 53 0 189 0 0 >> 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0 >> 53: 50 0 18 0 72 33 0 90 330 0 0 >> 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1 >> 54: 65 0 0 0 10 104 166 49 442 0 0 >> 0 126 26 226 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 >> 55: 57 0 0 0 61 35 83 30 157 101 0 >> 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3 >> 56: 232 0 2062 0 16 21 0 54422 0 0 >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 >> 34: 88 0 0 0 0 25 19 177 0 0 350 >> 24 88 102 362 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 >> 35: 49 19 0 0 65 130 64 29 67 0 10 >> 0 0 46 38 548 PCI-MSI 1572865-edge ens1f0-TxRx-1 >> 36: 53 0 0 64 15 53 85 71 108 0 24 >> 0 85 215 292 36 PCI-MSI 1572866-edge ens1f0-TxRx-2 >> 37: 46 196 0 0 10 45 57 39 19 0 0 >> 0 78 69 49 152 PCI-MSI 1572867-edge ens1f0-TxRx-3 >> 38: 226 0 0 0 159 145 749 247 0 0 >> 202 0 58259 0 450 0 PCI-MSI 1572868-edge ens1f0 >> 52: 95 896 0 0 0 18 53 0 194 0 0 >> 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0 >> 53: 50 0 18 0 72 33 0 95 330 0 0 >> 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1 >> 54: 65 0 0 0 10 104 166 49 442 0 0 >> 0 126 26 231 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 >> 55: 57 0 0 0 66 35 83 30 157 101 0 >> 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3 >> 56: 232 0 2071 0 16 21 0 54422 0 0 >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 >> >> Note the interrupt rate has gone way down. During the 10s interval, we only >> saw a handful of interrupts. >> >> Note that this patch was originally provided by Intel directly to AT&T and >> Vyatta, but unfortunately I am unable to find records of the exact author. >> >> We have been using this in production for more than a year. >> >> Fixes: af75078fece3 ("first public release") >> Cc: stable@dpdk.org >> >> Signed-off-by: Luca Boccassi <bluca@debian.org> >> --- >> drivers/net/ixgbe/base/ixgbe_vf.c | 33 ++++++++++++++++--------------- >> 1 file changed, 17 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c >> b/drivers/net/ixgbe/base/ixgbe_vf.c >> index 5b25a6b4d4..16086670b1 100644 >> --- a/drivers/net/ixgbe/base/ixgbe_vf.c >> +++ b/drivers/net/ixgbe/base/ixgbe_vf.c >> @@ -586,7 +586,6 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, >> ixgbe_link_speed *speed, >> s32 ret_val = IXGBE_SUCCESS; >> u32 links_reg; >> u32 in_msg = 0; >> - UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); >> >> /* If we were hit with a reset drop the link */ >> if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout) @@ -643,23 >> +642,25 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, >> ixgbe_link_speed *speed, >> *speed = IXGBE_LINK_SPEED_UNKNOWN; >> } >> >> - /* if the read failed it could just be a mailbox collision, best wait >> - * until we are called again and don't report an error >> - */ >> - if (mbx->ops.read(hw, &in_msg, 1, 0)) >> - goto out; >> + if (autoneg_wait_to_complete) { >> + /* if the read failed it could just be a mailbox collision, best >> wait >> + * until we are called again and don't report an error >> + */ >> + if (mbx->ops.read(hw, &in_msg, 1, 0)) >> + goto out; >> >> - if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { >> - /* msg is not CTS and is NACK we must have lost CTS status >> */ >> - if (in_msg & IXGBE_VT_MSGTYPE_NACK) >> + if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { >> + /* msg is not CTS and is NACK we must have lost CTS >> status */ >> + if (in_msg & IXGBE_VT_MSGTYPE_NACK) >> + ret_val = -1; >> + goto out; >> + } >> + >> + /* the pf is talking, if we timed out in the past we reinit */ >> + if (!mbx->timeout) { >> ret_val = -1; >> - goto out; >> - } >> - >> - /* the pf is talking, if we timed out in the past we reinit */ >> - if (!mbx->timeout) { >> - ret_val = -1; >> - goto out; >> + goto out; >> + } >> } >> >> /* if we passed all the tests above then the link is up and we no >> -- >> 2.18.0 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate 2018-11-07 18:54 ` Chas Williams @ 2018-11-07 19:10 ` Luca Boccassi 2018-11-08 2:55 ` Zhao1, Wei 2018-11-08 2:58 ` Zhao1, Wei 1 sibling, 1 reply; 7+ messages in thread From: Luca Boccassi @ 2018-11-07 19:10 UTC (permalink / raw) To: Chas Williams, Zhao1, Wei, dev; +Cc: Lu, Wenzhuo, Ananyev, Konstantin, stable On Wed, 2018-11-07 at 13:54 -0500, Chas Williams wrote: > > On 11/07/2018 04:17 AM, Zhao1, Wei wrote: > > Hi, Luca Boccassi > > > > The purpose of this patch is to reduce the mailbox interrupt > > from vf to pf, but there seem some point need for discussion in > > this patch. > > > > First, I do not know why do you change code of function > > ixgbe_check_mac_link_vf(), because in rte_eth_link_get_nowait() and > > rte_eth_link_get(), > > it will call ixgbe_dev_link_update()- > > >ixgbe_dev_link_update_share()-> ixgbevf_check_link() for VF, NOT > > ixgbe_check_mac_link_vf() in your patch! > > > > Second, in function ixgbevf_check_link(), there is mailbox message > > read operation for vf, > > " if (mbx->ops.read(hw, &in_msg, 1, 0))", that is > > ixgbe_read_mbx_vf() , > > This will cause interrupt from vf to pf, this is just the point of > > this patch, it is also the problem that you want to solve. > > So, you use autoneg_wait_to_complete flag to control this mailbox > > message read operation, maybe you will use > > rte_eth_link_get_nowait(), Which set autoneg_wait_to_complete = 0, > > then the interrupt from vf to pf can be reduced. > > > > But I do not think this patch is necessary, because in > > ixgbevf_check_link(), it,has > > I think you are right here. This patch dates to before the addition > of the vf argument to ixgbe_dev_link_update_share() and the split of > .link_update between ixgbe and ixgbevf. At one point, this patch was > especially beneficial if you were running bonding (which tends to > make > quite a few link status checks). > > So this patch probably hasn't been helping at this point. I will try > to get some time to locally test this. Yes, this looks like to be the case. Thank you Wei for double checking, and sorry for not having checked more thoroughly - this patch has been around for a long time, and I just rebased, tested and sent it without checking if it was still needed. I've marked it as "not applicable" on patchwork. > > " > > bool no_pflink_check = wait_to_complete == 0; > > > > //////////////////////// > > > > if (no_pflink_check) { > > if (*speed == > > IXGBE_LINK_SPEED_UNKNOWN) > > mac- > > >get_link_status = true; > > else > > mac- > > >get_link_status = false; > > > > goto out; > > } > > " > > Comment of "for a quick link status checking, wait_to_compelet == > > 0, skip PF link status checking " is clear. > > > > That means in rte_eth_link_get_nowait(), code will skip this > > mailbox read interrupt, only in > > rte_eth_link_get() there will be this interrupt, so I think what > > you need to is just replace > > rte_eth_link_get() with rte_eth_link_get_nowait() in your APP, > > that will reduce interrupt from vf to pf in mailbox read. > > > > > > > -----Original Message----- > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Luca > > > Boccassi > > > Sent: Wednesday, August 15, 2018 10:15 PM > > > To: dev@dpdk.org > > > Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin > > > <konstantin.ananyev@intel.com>; Luca Boccassi <bluca@debian.org>; > > > stable@dpdk.org > > > Subject: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox > > > interrupt rate > > > > > > We have observed high rate of NIC PF interrupts when VNF is using > > > DPDK > > > APIs rte_eth_link_get_nowait() and rte_eth_link_get() functions, > > > as they > > > are causing VF driver to send many MBOX ACK messages. > > > > > > With these changes, the interrupt rates go down significantly. > > > Here's some > > > testing results: > > > > > > Without the patch: > > > > > > $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep > > > 'CPU|ens1f' > > > /proc/interrupts > > > CPU0 CPU1 CPU2 CPU3 CPU4 > > > CPU5 CPU6 CPU7 > > > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 > > > CPU14 CPU15 > > > 34: 88 0 0 0 0 > > > 41 30 509 0 0 350 > > > 24 88 114 461 562 PCI-MSI 1572864- > > > edge ens1f0-TxRx-0 > > > 35: 49 24 0 0 65 > > > 130 64 29 67 0 10 > > > 0 0 46 38 764 PCI-MSI 1572865- > > > edge ens1f0-TxRx-1 > > > 36: 53 0 0 64 15 > > > 85 132 71 108 0 > > > 30 0 165 215 303 104 PCI- > > > MSI 1572866-edge ens1f0- > > > TxRx-2 > > > 37: 46 196 0 0 10 > > > 48 62 68 51 0 0 > > > 0 103 82 54 192 PCI-MSI 1572867- > > > edge ens1f0-TxRx-3 > > > 38: 226 0 0 0 159 > > > 145 749 265 0 0 > > > 202 0 69229 166 450 0 PCI- > > > MSI 1572868-edge ens1f0 > > > 52: 95 896 0 0 0 > > > 18 53 0 494 0 0 > > > 0 0 265 79 124 PCI-MSI 1574912- > > > edge ens1f1-TxRx-0 > > > 53: 50 0 18 0 72 > > > 33 0 168 330 0 0 > > > 0 141 22 12 65 PCI-MSI 1574913- > > > edge ens1f1-TxRx-1 > > > 54: 65 0 0 0 239 > > > 104 166 49 442 0 > > > 0 0 126 26 307 0 PCI- > > > MSI 1574914-edge ens1f1-TxRx-2 > > > 55: 57 0 0 0 123 > > > 35 83 54 157 106 > > > 0 0 26 29 312 97 PCI- > > > MSI 1574915-edge ens1f1-TxRx-3 > > > 56: 232 0 13910 0 16 > > > 21 0 54422 0 0 > > > 0 24 25 0 78 0 PCI- > > > MSI 1574916-edge ens1f1 > > > CPU0 CPU1 CPU2 CPU3 CPU4 > > > CPU5 CPU6 CPU7 > > > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 > > > CPU14 CPU15 > > > 34: 88 0 0 0 0 > > > 41 30 509 0 0 350 > > > 24 88 119 461 562 PCI-MSI 1572864- > > > edge ens1f0-TxRx-0 > > > 35: 49 24 0 0 65 > > > 130 64 29 67 0 10 > > > 0 0 46 38 771 PCI-MSI 1572865- > > > edge ens1f0-TxRx-1 > > > 36: 53 0 0 64 15 > > > 85 132 71 108 0 > > > 30 0 165 215 303 113 PCI- > > > MSI 1572866-edge ens1f0- > > > TxRx-2 > > > 37: 46 196 0 0 10 > > > 48 62 68 56 0 0 > > > 0 103 82 54 192 PCI-MSI 1572867- > > > edge ens1f0-TxRx-3 > > > 38: 226 0 0 0 159 > > > 145 749 265 0 0 > > > 202 0 71281 166 450 0 PCI- > > > MSI 1572868-edge ens1f0 > > > 52: 95 896 0 0 0 > > > 18 53 0 494 0 0 > > > 0 0 265 79 133 PCI-MSI 1574912- > > > edge ens1f1-TxRx-0 > > > 53: 50 0 18 0 72 > > > 33 0 173 330 0 0 > > > 0 141 22 12 65 PCI-MSI 1574913- > > > edge ens1f1-TxRx-1 > > > 54: 65 0 0 0 239 > > > 104 166 49 442 0 > > > 0 0 126 26 312 0 PCI- > > > MSI 1574914-edge ens1f1-TxRx-2 > > > 55: 57 0 0 0 123 > > > 35 83 59 157 106 > > > 0 0 26 29 312 97 PCI- > > > MSI 1574915-edge ens1f1-TxRx-3 > > > 56: 232 0 15910 0 16 > > > 21 0 54422 0 0 > > > 0 24 25 0 78 0 PCI- > > > MSI 1574916-edge ens1f1 > > > > > > During the 10s interval, CPU2 jumped by 2000 interrupts, CPU12 by > > > 2051 > > > interrupts, for about 200 interrupts/second. That's on the order > > > of what we > > > expect. I would have guessed 100/s but perhaps there are two > > > mailbox > > > messages. > > > > > > With the patch: > > > > > > $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep > > > 'CPU|ens1f' > > > /proc/interrupts > > > CPU0 CPU1 CPU2 CPU3 CPU4 > > > CPU5 CPU6 CPU7 > > > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 > > > CPU14 CPU15 > > > 34: 88 0 0 0 0 > > > 25 19 177 0 0 350 > > > 24 88 100 362 559 PCI-MSI 1572864- > > > edge ens1f0-TxRx-0 > > > 35: 49 19 0 0 65 > > > 130 64 29 67 0 10 > > > 0 0 46 38 543 PCI-MSI 1572865- > > > edge ens1f0-TxRx-1 > > > 36: 53 0 0 64 15 > > > 53 85 71 108 0 24 > > > 0 85 215 292 31 PCI-MSI 1572866- > > > edge ens1f0-TxRx-2 > > > 37: 46 196 0 0 10 > > > 43 57 39 19 0 0 > > > 0 78 69 49 149 PCI-MSI 1572867- > > > edge ens1f0-TxRx-3 > > > 38: 226 0 0 0 159 > > > 145 749 247 0 0 > > > 202 0 58250 0 450 0 PCI- > > > MSI 1572868-edge ens1f0 > > > 52: 95 896 0 0 0 > > > 18 53 0 189 0 0 > > > 0 0 265 79 25 PCI-MSI 1574912- > > > edge ens1f1-TxRx-0 > > > 53: 50 0 18 0 72 > > > 33 0 90 330 0 0 > > > 0 136 5 12 0 PCI-MSI 1574913- > > > edge ens1f1-TxRx-1 > > > 54: 65 0 0 0 10 > > > 104 166 49 442 0 0 > > > 0 126 26 226 0 PCI-MSI 1574914- > > > edge ens1f1-TxRx-2 > > > 55: 57 0 0 0 61 > > > 35 83 30 157 101 0 > > > 0 26 15 312 0 PCI-MSI 1574915- > > > edge ens1f1-TxRx-3 > > > 56: 232 0 2062 0 16 > > > 21 0 54422 0 0 > > > 0 24 25 0 78 0 PCI- > > > MSI 1574916-edge ens1f1 > > > CPU0 CPU1 CPU2 CPU3 CPU4 > > > CPU5 CPU6 CPU7 > > > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 > > > CPU14 CPU15 > > > 34: 88 0 0 0 0 > > > 25 19 177 0 0 350 > > > 24 88 102 362 562 PCI-MSI 1572864- > > > edge ens1f0-TxRx-0 > > > 35: 49 19 0 0 65 > > > 130 64 29 67 0 10 > > > 0 0 46 38 548 PCI-MSI 1572865- > > > edge ens1f0-TxRx-1 > > > 36: 53 0 0 64 15 > > > 53 85 71 108 0 24 > > > 0 85 215 292 36 PCI-MSI 1572866- > > > edge ens1f0-TxRx-2 > > > 37: 46 196 0 0 10 > > > 45 57 39 19 0 0 > > > 0 78 69 49 152 PCI-MSI 1572867- > > > edge ens1f0-TxRx-3 > > > 38: 226 0 0 0 159 > > > 145 749 247 0 0 > > > 202 0 58259 0 450 0 PCI- > > > MSI 1572868-edge ens1f0 > > > 52: 95 896 0 0 0 > > > 18 53 0 194 0 0 > > > 0 0 265 79 25 PCI-MSI 1574912- > > > edge ens1f1-TxRx-0 > > > 53: 50 0 18 0 72 > > > 33 0 95 330 0 0 > > > 0 136 5 12 0 PCI-MSI 1574913- > > > edge ens1f1-TxRx-1 > > > 54: 65 0 0 0 10 > > > 104 166 49 442 0 0 > > > 0 126 26 231 0 PCI-MSI 1574914- > > > edge ens1f1-TxRx-2 > > > 55: 57 0 0 0 66 > > > 35 83 30 157 101 0 > > > 0 26 15 312 0 PCI-MSI 1574915- > > > edge ens1f1-TxRx-3 > > > 56: 232 0 2071 0 16 > > > 21 0 54422 0 0 > > > 0 24 25 0 78 0 PCI- > > > MSI 1574916-edge ens1f1 > > > > > > Note the interrupt rate has gone way down. During the 10s > > > interval, we only > > > saw a handful of interrupts. > > > > > > Note that this patch was originally provided by Intel directly to > > > AT&T and > > > Vyatta, but unfortunately I am unable to find records of the > > > exact author. > > > > > > We have been using this in production for more than a year. > > > > > > Fixes: af75078fece3 ("first public release") > > > Cc: stable@dpdk.org > > > > > > Signed-off-by: Luca Boccassi <bluca@debian.org> > > > --- > > > drivers/net/ixgbe/base/ixgbe_vf.c | 33 ++++++++++++++++------ > > > --------- > > > 1 file changed, 17 insertions(+), 16 deletions(-) > > > > > > diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c > > > b/drivers/net/ixgbe/base/ixgbe_vf.c > > > index 5b25a6b4d4..16086670b1 100644 > > > --- a/drivers/net/ixgbe/base/ixgbe_vf.c > > > +++ b/drivers/net/ixgbe/base/ixgbe_vf.c > > > @@ -586,7 +586,6 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw > > > *hw, > > > ixgbe_link_speed *speed, > > > s32 ret_val = IXGBE_SUCCESS; > > > u32 links_reg; > > > u32 in_msg = 0; > > > - UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); > > > > > > /* If we were hit with a reset drop the link */ > > > if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout) @@ > > > -643,23 > > > +642,25 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, > > > ixgbe_link_speed *speed, > > > *speed = IXGBE_LINK_SPEED_UNKNOWN; > > > } > > > > > > - /* if the read failed it could just be a mailbox > > > collision, best wait > > > - * until we are called again and don't report an error > > > - */ > > > - if (mbx->ops.read(hw, &in_msg, 1, 0)) > > > - goto out; > > > + if (autoneg_wait_to_complete) { > > > + /* if the read failed it could just be a mailbox > > > collision, best > > > wait > > > + * until we are called again and don't report an > > > error > > > + */ > > > + if (mbx->ops.read(hw, &in_msg, 1, 0)) > > > + goto out; > > > > > > - if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { > > > - /* msg is not CTS and is NACK we must have lost > > > CTS status > > > */ > > > - if (in_msg & IXGBE_VT_MSGTYPE_NACK) > > > + if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { > > > + /* msg is not CTS and is NACK we must > > > have lost CTS > > > status */ > > > + if (in_msg & IXGBE_VT_MSGTYPE_NACK) > > > + ret_val = -1; > > > + goto out; > > > + } > > > + > > > + /* the pf is talking, if we timed out in the > > > past we reinit */ > > > + if (!mbx->timeout) { > > > ret_val = -1; > > > - goto out; > > > - } > > > - > > > - /* the pf is talking, if we timed out in the past we > > > reinit */ > > > - if (!mbx->timeout) { > > > - ret_val = -1; > > > - goto out; > > > + goto out; > > > + } > > > } > > > > > > /* if we passed all the tests above then the link is up > > > and we no > > > -- > > > 2.18.0 -- Kind regards, Luca Boccassi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate 2018-11-07 19:10 ` Luca Boccassi @ 2018-11-08 2:55 ` Zhao1, Wei 0 siblings, 0 replies; 7+ messages in thread From: Zhao1, Wei @ 2018-11-08 2:55 UTC (permalink / raw) To: Luca Boccassi, Chas Williams, dev Cc: Lu, Wenzhuo, Ananyev, Konstantin, stable > -----Original Message----- > From: Luca Boccassi [mailto:bluca@debian.org] > Sent: Thursday, November 8, 2018 3:10 AM > To: Chas Williams <3chas3@gmail.com>; Zhao1, Wei <wei.zhao1@intel.com>; > dev@dpdk.org > Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin > <konstantin.ananyev@intel.com>; stable@dpdk.org > Subject: Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate > > On Wed, 2018-11-07 at 13:54 -0500, Chas Williams wrote: > > > > On 11/07/2018 04:17 AM, Zhao1, Wei wrote: > > > Hi, Luca Boccassi > > > > > > The purpose of this patch is to reduce the mailbox interrupt > > > from vf to pf, but there seem some point need for discussion in this > > > patch. > > > > > > First, I do not know why do you change code of function > > > ixgbe_check_mac_link_vf(), because in rte_eth_link_get_nowait() and > > > rte_eth_link_get(), it will call ixgbe_dev_link_update()- > > > >ixgbe_dev_link_update_share()-> ixgbevf_check_link() for VF, NOT > > > ixgbe_check_mac_link_vf() in your patch! > > > > > > Second, in function ixgbevf_check_link(), there is mailbox message > > > read operation for vf, " if (mbx->ops.read(hw, &in_msg, 1, 0))", > > > that is > > > ixgbe_read_mbx_vf() , > > > This will cause interrupt from vf to pf, this is just the point of > > > this patch, it is also the problem that you want to solve. > > > So, you use autoneg_wait_to_complete flag to control this mailbox > > > message read operation, maybe you will use > > > rte_eth_link_get_nowait(), Which set autoneg_wait_to_complete = 0, > > > then the interrupt from vf to pf can be reduced. > > > > > > But I do not think this patch is necessary, because in > > > ixgbevf_check_link(), it,has > > > > I think you are right here. This patch dates to before the addition of > > the vf argument to ixgbe_dev_link_update_share() and the split of > > .link_update between ixgbe and ixgbevf. At one point, this patch was > > especially beneficial if you were running bonding (which tends to make > > quite a few link status checks). > > > > So this patch probably hasn't been helping at this point. I will try > > to get some time to locally test this. > > Yes, this looks like to be the case. > > Thank you Wei for double checking, and sorry for not having checked more > thoroughly - this patch has been around for a long time, and I just rebased, > tested and sent it without checking if it was still needed. > > I've marked it as "not applicable" on patchwork. You are welcome. BTW, I really appreciate your debug ability to find the root cause of too much interrupt is coming from mailbox read operation! That need deep knowledge of NIC. > > > > " > > > bool no_pflink_check = wait_to_complete == 0; > > > > > > //////////////////////// > > > > > > if (no_pflink_check) { > > > if (*speed == > > > IXGBE_LINK_SPEED_UNKNOWN) > > > mac- > > > >get_link_status = true; > > > else > > > mac- > > > >get_link_status = false; > > > > > > goto out; > > > } > > > " > > > Comment of "for a quick link status checking, wait_to_compelet == 0, > > > skip PF link status checking " is clear. > > > > > > That means in rte_eth_link_get_nowait(), code will skip this mailbox > > > read interrupt, only in > > > rte_eth_link_get() there will be this interrupt, so I think what you > > > need to is just replace > > > rte_eth_link_get() with rte_eth_link_get_nowait() in your APP, that > > > will reduce interrupt from vf to pf in mailbox read. > > > > > > > > > > -----Original Message----- > > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Luca Boccassi > > > > Sent: Wednesday, August 15, 2018 10:15 PM > > > > To: dev@dpdk.org > > > > Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin > > > > <konstantin.ananyev@intel.com>; Luca Boccassi <bluca@debian.org>; > > > > stable@dpdk.org > > > > Subject: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt > > > > rate > > > > > > > > We have observed high rate of NIC PF interrupts when VNF is using > > > > DPDK APIs rte_eth_link_get_nowait() and rte_eth_link_get() > > > > functions, as they are causing VF driver to send many MBOX ACK > > > > messages. > > > > > > > > With these changes, the interrupt rates go down significantly. > > > > Here's some > > > > testing results: > > > > > > > > Without the patch: > > > > > > > > $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' > > > > /proc/interrupts > > > > CPU0 CPU1 CPU2 CPU3 CPU4 > > > > CPU5 CPU6 CPU7 > > > > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 > > > > CPU14 CPU15 > > > > 34: 88 0 0 0 0 > > > > 41 30 509 0 0 350 > > > > 24 88 114 461 562 PCI-MSI 1572864- > > > > edge ens1f0-TxRx-0 > > > > 35: 49 24 0 0 65 > > > > 130 64 29 67 0 10 > > > > 0 0 46 38 764 PCI-MSI 1572865- > > > > edge ens1f0-TxRx-1 > > > > 36: 53 0 0 64 15 > > > > 85 132 71 108 0 > > > > 30 0 165 215 303 104 PCI- > > > > MSI 1572866-edge ens1f0- > > > > TxRx-2 > > > > 37: 46 196 0 0 10 > > > > 48 62 68 51 0 0 > > > > 0 103 82 54 192 PCI-MSI 1572867- > > > > edge ens1f0-TxRx-3 > > > > 38: 226 0 0 0 159 > > > > 145 749 265 0 0 > > > > 202 0 69229 166 450 0 PCI- > > > > MSI 1572868-edge ens1f0 > > > > 52: 95 896 0 0 0 > > > > 18 53 0 494 0 0 > > > > 0 0 265 79 124 PCI-MSI 1574912- > > > > edge ens1f1-TxRx-0 > > > > 53: 50 0 18 0 72 > > > > 33 0 168 330 0 0 > > > > 0 141 22 12 65 PCI-MSI 1574913- > > > > edge ens1f1-TxRx-1 > > > > 54: 65 0 0 0 239 > > > > 104 166 49 442 0 > > > > 0 0 126 26 307 0 PCI- > > > > MSI 1574914-edge ens1f1-TxRx-2 > > > > 55: 57 0 0 0 123 > > > > 35 83 54 157 106 > > > > 0 0 26 29 312 97 PCI- > > > > MSI 1574915-edge ens1f1-TxRx-3 > > > > 56: 232 0 13910 0 16 > > > > 21 0 54422 0 0 > > > > 0 24 25 0 78 0 PCI- > > > > MSI 1574916-edge ens1f1 > > > > CPU0 CPU1 CPU2 CPU3 CPU4 > > > > CPU5 CPU6 CPU7 > > > > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 > > > > CPU14 CPU15 > > > > 34: 88 0 0 0 0 > > > > 41 30 509 0 0 350 > > > > 24 88 119 461 562 PCI-MSI 1572864- > > > > edge ens1f0-TxRx-0 > > > > 35: 49 24 0 0 65 > > > > 130 64 29 67 0 10 > > > > 0 0 46 38 771 PCI-MSI 1572865- > > > > edge ens1f0-TxRx-1 > > > > 36: 53 0 0 64 15 > > > > 85 132 71 108 0 > > > > 30 0 165 215 303 113 PCI- > > > > MSI 1572866-edge ens1f0- > > > > TxRx-2 > > > > 37: 46 196 0 0 10 > > > > 48 62 68 56 0 0 > > > > 0 103 82 54 192 PCI-MSI 1572867- > > > > edge ens1f0-TxRx-3 > > > > 38: 226 0 0 0 159 > > > > 145 749 265 0 0 > > > > 202 0 71281 166 450 0 PCI- > > > > MSI 1572868-edge ens1f0 > > > > 52: 95 896 0 0 0 > > > > 18 53 0 494 0 0 > > > > 0 0 265 79 133 PCI-MSI 1574912- > > > > edge ens1f1-TxRx-0 > > > > 53: 50 0 18 0 72 > > > > 33 0 173 330 0 0 > > > > 0 141 22 12 65 PCI-MSI 1574913- > > > > edge ens1f1-TxRx-1 > > > > 54: 65 0 0 0 239 > > > > 104 166 49 442 0 > > > > 0 0 126 26 312 0 PCI- > > > > MSI 1574914-edge ens1f1-TxRx-2 > > > > 55: 57 0 0 0 123 > > > > 35 83 59 157 106 > > > > 0 0 26 29 312 97 PCI- > > > > MSI 1574915-edge ens1f1-TxRx-3 > > > > 56: 232 0 15910 0 16 > > > > 21 0 54422 0 0 > > > > 0 24 25 0 78 0 PCI- > > > > MSI 1574916-edge ens1f1 > > > > > > > > During the 10s interval, CPU2 jumped by 2000 interrupts, CPU12 by > > > > 2051 > > > > interrupts, for about 200 interrupts/second. That's on the order > > > > of what we expect. I would have guessed 100/s but perhaps there > > > > are two mailbox messages. > > > > > > > > With the patch: > > > > > > > > $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' > > > > /proc/interrupts > > > > CPU0 CPU1 CPU2 CPU3 CPU4 > > > > CPU5 CPU6 CPU7 > > > > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 > > > > CPU14 CPU15 > > > > 34: 88 0 0 0 0 > > > > 25 19 177 0 0 350 > > > > 24 88 100 362 559 PCI-MSI 1572864- > > > > edge ens1f0-TxRx-0 > > > > 35: 49 19 0 0 65 > > > > 130 64 29 67 0 10 > > > > 0 0 46 38 543 PCI-MSI 1572865- > > > > edge ens1f0-TxRx-1 > > > > 36: 53 0 0 64 15 > > > > 53 85 71 108 0 24 > > > > 0 85 215 292 31 PCI-MSI 1572866- > > > > edge ens1f0-TxRx-2 > > > > 37: 46 196 0 0 10 > > > > 43 57 39 19 0 0 > > > > 0 78 69 49 149 PCI-MSI 1572867- > > > > edge ens1f0-TxRx-3 > > > > 38: 226 0 0 0 159 > > > > 145 749 247 0 0 > > > > 202 0 58250 0 450 0 PCI- > > > > MSI 1572868-edge ens1f0 > > > > 52: 95 896 0 0 0 > > > > 18 53 0 189 0 0 > > > > 0 0 265 79 25 PCI-MSI 1574912- > > > > edge ens1f1-TxRx-0 > > > > 53: 50 0 18 0 72 > > > > 33 0 90 330 0 0 > > > > 0 136 5 12 0 PCI-MSI 1574913- > > > > edge ens1f1-TxRx-1 > > > > 54: 65 0 0 0 10 > > > > 104 166 49 442 0 0 > > > > 0 126 26 226 0 PCI-MSI 1574914- > > > > edge ens1f1-TxRx-2 > > > > 55: 57 0 0 0 61 > > > > 35 83 30 157 101 0 > > > > 0 26 15 312 0 PCI-MSI 1574915- > > > > edge ens1f1-TxRx-3 > > > > 56: 232 0 2062 0 16 > > > > 21 0 54422 0 0 > > > > 0 24 25 0 78 0 PCI- > > > > MSI 1574916-edge ens1f1 > > > > CPU0 CPU1 CPU2 CPU3 CPU4 > > > > CPU5 CPU6 CPU7 > > > > CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 > > > > CPU14 CPU15 > > > > 34: 88 0 0 0 0 > > > > 25 19 177 0 0 350 > > > > 24 88 102 362 562 PCI-MSI 1572864- > > > > edge ens1f0-TxRx-0 > > > > 35: 49 19 0 0 65 > > > > 130 64 29 67 0 10 > > > > 0 0 46 38 548 PCI-MSI 1572865- > > > > edge ens1f0-TxRx-1 > > > > 36: 53 0 0 64 15 > > > > 53 85 71 108 0 24 > > > > 0 85 215 292 36 PCI-MSI 1572866- > > > > edge ens1f0-TxRx-2 > > > > 37: 46 196 0 0 10 > > > > 45 57 39 19 0 0 > > > > 0 78 69 49 152 PCI-MSI 1572867- > > > > edge ens1f0-TxRx-3 > > > > 38: 226 0 0 0 159 > > > > 145 749 247 0 0 > > > > 202 0 58259 0 450 0 PCI- > > > > MSI 1572868-edge ens1f0 > > > > 52: 95 896 0 0 0 > > > > 18 53 0 194 0 0 > > > > 0 0 265 79 25 PCI-MSI 1574912- > > > > edge ens1f1-TxRx-0 > > > > 53: 50 0 18 0 72 > > > > 33 0 95 330 0 0 > > > > 0 136 5 12 0 PCI-MSI 1574913- > > > > edge ens1f1-TxRx-1 > > > > 54: 65 0 0 0 10 > > > > 104 166 49 442 0 0 > > > > 0 126 26 231 0 PCI-MSI 1574914- > > > > edge ens1f1-TxRx-2 > > > > 55: 57 0 0 0 66 > > > > 35 83 30 157 101 0 > > > > 0 26 15 312 0 PCI-MSI 1574915- > > > > edge ens1f1-TxRx-3 > > > > 56: 232 0 2071 0 16 > > > > 21 0 54422 0 0 > > > > 0 24 25 0 78 0 PCI- > > > > MSI 1574916-edge ens1f1 > > > > > > > > Note the interrupt rate has gone way down. During the 10s > > > > interval, we only saw a handful of interrupts. > > > > > > > > Note that this patch was originally provided by Intel directly to > > > > AT&T and Vyatta, but unfortunately I am unable to find records of > > > > the exact author. > > > > > > > > We have been using this in production for more than a year. > > > > > > > > Fixes: af75078fece3 ("first public release") > > > > Cc: stable@dpdk.org > > > > > > > > Signed-off-by: Luca Boccassi <bluca@debian.org> > > > > --- > > > > drivers/net/ixgbe/base/ixgbe_vf.c | 33 ++++++++++++++++------ > > > > --------- > > > > 1 file changed, 17 insertions(+), 16 deletions(-) > > > > > > > > diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c > > > > b/drivers/net/ixgbe/base/ixgbe_vf.c > > > > index 5b25a6b4d4..16086670b1 100644 > > > > --- a/drivers/net/ixgbe/base/ixgbe_vf.c > > > > +++ b/drivers/net/ixgbe/base/ixgbe_vf.c > > > > @@ -586,7 +586,6 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw > > > > *hw, ixgbe_link_speed *speed, > > > > s32 ret_val = IXGBE_SUCCESS; > > > > u32 links_reg; > > > > u32 in_msg = 0; > > > > - UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); > > > > > > > > /* If we were hit with a reset drop the link */ > > > > if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout) @@ > > > > -643,23 > > > > +642,25 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, > > > > ixgbe_link_speed *speed, > > > > *speed = IXGBE_LINK_SPEED_UNKNOWN; > > > > } > > > > > > > > - /* if the read failed it could just be a mailbox > > > > collision, best wait > > > > - * until we are called again and don't report an error > > > > - */ > > > > - if (mbx->ops.read(hw, &in_msg, 1, 0)) > > > > - goto out; > > > > + if (autoneg_wait_to_complete) { > > > > + /* if the read failed it could just be a mailbox > > > > collision, best > > > > wait > > > > + * until we are called again and don't report an > > > > error > > > > + */ > > > > + if (mbx->ops.read(hw, &in_msg, 1, 0)) > > > > + goto out; > > > > > > > > - if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { > > > > - /* msg is not CTS and is NACK we must have lost > > > > CTS status > > > > */ > > > > - if (in_msg & IXGBE_VT_MSGTYPE_NACK) > > > > + if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { > > > > + /* msg is not CTS and is NACK we must > > > > have lost CTS > > > > status */ > > > > + if (in_msg & IXGBE_VT_MSGTYPE_NACK) > > > > + ret_val = -1; > > > > + goto out; > > > > + } > > > > + > > > > + /* the pf is talking, if we timed out in the > > > > past we reinit */ > > > > + if (!mbx->timeout) { > > > > ret_val = -1; > > > > - goto out; > > > > - } > > > > - > > > > - /* the pf is talking, if we timed out in the past we > > > > reinit */ > > > > - if (!mbx->timeout) { > > > > - ret_val = -1; > > > > - goto out; > > > > + goto out; > > > > + } > > > > } > > > > > > > > /* if we passed all the tests above then the link is up and we > > > > no > > > > -- > > > > 2.18.0 > > -- > Kind regards, > Luca Boccassi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate 2018-11-07 18:54 ` Chas Williams 2018-11-07 19:10 ` Luca Boccassi @ 2018-11-08 2:58 ` Zhao1, Wei 1 sibling, 0 replies; 7+ messages in thread From: Zhao1, Wei @ 2018-11-08 2:58 UTC (permalink / raw) To: Chas Williams, Luca Boccassi, dev Cc: Lu, Wenzhuo, Ananyev, Konstantin, stable Hi，Chas Williams > -----Original Message----- > From: Chas Williams [mailto:3chas3@gmail.com] > Sent: Thursday, November 8, 2018 2:55 AM > To: Zhao1, Wei <wei.zhao1@intel.com>; Luca Boccassi <bluca@debian.org>; > dev@dpdk.org > Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin > <konstantin.ananyev@intel.com>; stable@dpdk.org > Subject: Re: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate > > > > On 11/07/2018 04:17 AM, Zhao1, Wei wrote: > > Hi, Luca Boccassi > > > > The purpose of this patch is to reduce the mailbox interrupt from vf to pf, > but there seem some point need for discussion in this patch. > > > > First, I do not know why do you change code of function > > ixgbe_check_mac_link_vf(), because in rte_eth_link_get_nowait() and > rte_eth_link_get(), it will call ixgbe_dev_link_update()- > >ixgbe_dev_link_update_share()-> ixgbevf_check_link() for VF, NOT > ixgbe_check_mac_link_vf() in your patch! > > > > Second, in function ixgbevf_check_link(), there is mailbox message > > read operation for vf, " if (mbx->ops.read(hw, &in_msg, 1, 0))", that > > is ixgbe_read_mbx_vf() , This will cause interrupt from vf to pf, this is just > the point of this patch, it is also the problem that you want to solve. > > So, you use autoneg_wait_to_complete flag to control this mailbox > message read operation, maybe you will use rte_eth_link_get_nowait(), > Which set autoneg_wait_to_complete = 0, then the interrupt from vf to pf > can be reduced. > > > > But I do not think this patch is necessary, because in > > ixgbevf_check_link(), it,has > > I think you are right here. This patch dates to before the addition of the vf > argument to ixgbe_dev_link_update_share() and the split of .link_update > between ixgbe and ixgbevf. At one point, this patch was especially beneficial > if you were running bonding (which tends to make quite a few link status > checks). If you have other idea based on this patch, I am willing to review and ack. > > So this patch probably hasn't been helping at this point. I will try to get some > time to locally test this. > > > " > > bool no_pflink_check = wait_to_complete == 0; > > > > //////////////////////// > > > > if (no_pflink_check) { > > if (*speed == IXGBE_LINK_SPEED_UNKNOWN) > > mac->get_link_status = true; > > else > > mac->get_link_status > > = false; > > > > goto out; > > } > > " > > Comment of "for a quick link status checking, wait_to_compelet == 0, skip > PF link status checking " is clear. > > > > That means in rte_eth_link_get_nowait(), code will skip this mailbox > > read interrupt, only in > > rte_eth_link_get() there will be this interrupt, so I think what you > > need to is just replace > > rte_eth_link_get() with rte_eth_link_get_nowait() in your APP, that > > will reduce interrupt from vf to pf in mailbox read. > > > > > >> -----Original Message----- > >> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Luca Boccassi > >> Sent: Wednesday, August 15, 2018 10:15 PM > >> To: dev@dpdk.org > >> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin > >> <konstantin.ananyev@intel.com>; Luca Boccassi <bluca@debian.org>; > >> stable@dpdk.org > >> Subject: [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt > >> rate > >> > >> We have observed high rate of NIC PF interrupts when VNF is using > >> DPDK APIs rte_eth_link_get_nowait() and rte_eth_link_get() functions, > >> as they are causing VF driver to send many MBOX ACK messages. > >> > >> With these changes, the interrupt rates go down significantly. Here's > >> some testing results: > >> > >> Without the patch: > >> > >> $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' > >> /proc/interrupts > >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 > >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 > >> 34: 88 0 0 0 0 41 30 509 0 0 > 350 > >> 24 88 114 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 > >> 35: 49 24 0 0 65 130 64 29 67 0 > 10 > >> 0 0 46 38 764 PCI-MSI 1572865-edge ens1f0-TxRx-1 > >> 36: 53 0 0 64 15 85 132 71 108 0 > >> 30 0 165 215 303 104 PCI-MSI 1572866-edge ens1f0- > >> TxRx-2 > >> 37: 46 196 0 0 10 48 62 68 51 0 > 0 > >> 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3 > >> 38: 226 0 0 0 159 145 749 265 0 0 > >> 202 0 69229 166 450 0 PCI-MSI 1572868-edge ens1f0 > >> 52: 95 896 0 0 0 18 53 0 494 0 > 0 > >> 0 0 265 79 124 PCI-MSI 1574912-edge ens1f1-TxRx-0 > >> 53: 50 0 18 0 72 33 0 168 330 0 > 0 > >> 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1 > >> 54: 65 0 0 0 239 104 166 49 442 0 > >> 0 0 126 26 307 0 PCI-MSI 1574914-edge ens1f1- > TxRx-2 > >> 55: 57 0 0 0 123 35 83 54 157 106 > >> 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1- > TxRx-3 > >> 56: 232 0 13910 0 16 21 0 54422 0 0 > >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 > >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 > >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 > >> 34: 88 0 0 0 0 41 30 509 0 0 > 350 > >> 24 88 119 461 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 > >> 35: 49 24 0 0 65 130 64 29 67 0 > 10 > >> 0 0 46 38 771 PCI-MSI 1572865-edge ens1f0-TxRx-1 > >> 36: 53 0 0 64 15 85 132 71 108 0 > >> 30 0 165 215 303 113 PCI-MSI 1572866-edge ens1f0- > >> TxRx-2 > >> 37: 46 196 0 0 10 48 62 68 56 0 > 0 > >> 0 103 82 54 192 PCI-MSI 1572867-edge ens1f0-TxRx-3 > >> 38: 226 0 0 0 159 145 749 265 0 0 > >> 202 0 71281 166 450 0 PCI-MSI 1572868-edge ens1f0 > >> 52: 95 896 0 0 0 18 53 0 494 0 > 0 > >> 0 0 265 79 133 PCI-MSI 1574912-edge ens1f1-TxRx-0 > >> 53: 50 0 18 0 72 33 0 173 330 0 > 0 > >> 0 141 22 12 65 PCI-MSI 1574913-edge ens1f1-TxRx-1 > >> 54: 65 0 0 0 239 104 166 49 442 0 > >> 0 0 126 26 312 0 PCI-MSI 1574914-edge ens1f1- > TxRx-2 > >> 55: 57 0 0 0 123 35 83 59 157 106 > >> 0 0 26 29 312 97 PCI-MSI 1574915-edge ens1f1- > TxRx-3 > >> 56: 232 0 15910 0 16 21 0 54422 0 0 > >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 > >> > >> During the 10s interval, CPU2 jumped by 2000 interrupts, CPU12 by > >> 2051 interrupts, for about 200 interrupts/second. That's on the order > >> of what we expect. I would have guessed 100/s but perhaps there are > >> two mailbox messages. > >> > >> With the patch: > >> > >> $ egrep 'CPU|ens1f' /proc/interrupts ; sleep 10; egrep 'CPU|ens1f' > >> /proc/interrupts > >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 > >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 > >> 34: 88 0 0 0 0 25 19 177 0 0 > 350 > >> 24 88 100 362 559 PCI-MSI 1572864-edge ens1f0-TxRx-0 > >> 35: 49 19 0 0 65 130 64 29 67 0 > 10 > >> 0 0 46 38 543 PCI-MSI 1572865-edge ens1f0-TxRx-1 > >> 36: 53 0 0 64 15 53 85 71 108 0 > 24 > >> 0 85 215 292 31 PCI-MSI 1572866-edge ens1f0-TxRx-2 > >> 37: 46 196 0 0 10 43 57 39 19 0 > 0 > >> 0 78 69 49 149 PCI-MSI 1572867-edge ens1f0-TxRx-3 > >> 38: 226 0 0 0 159 145 749 247 0 0 > >> 202 0 58250 0 450 0 PCI-MSI 1572868-edge ens1f0 > >> 52: 95 896 0 0 0 18 53 0 189 0 > 0 > >> 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0 > >> 53: 50 0 18 0 72 33 0 90 330 0 > 0 > >> 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1 > >> 54: 65 0 0 0 10 104 166 49 442 0 > 0 > >> 0 126 26 226 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 > >> 55: 57 0 0 0 61 35 83 30 157 101 > 0 > >> 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3 > >> 56: 232 0 2062 0 16 21 0 54422 0 0 > >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 > >> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 > >> CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 > >> 34: 88 0 0 0 0 25 19 177 0 0 > 350 > >> 24 88 102 362 562 PCI-MSI 1572864-edge ens1f0-TxRx-0 > >> 35: 49 19 0 0 65 130 64 29 67 0 > 10 > >> 0 0 46 38 548 PCI-MSI 1572865-edge ens1f0-TxRx-1 > >> 36: 53 0 0 64 15 53 85 71 108 0 > 24 > >> 0 85 215 292 36 PCI-MSI 1572866-edge ens1f0-TxRx-2 > >> 37: 46 196 0 0 10 45 57 39 19 0 > 0 > >> 0 78 69 49 152 PCI-MSI 1572867-edge ens1f0-TxRx-3 > >> 38: 226 0 0 0 159 145 749 247 0 0 > >> 202 0 58259 0 450 0 PCI-MSI 1572868-edge ens1f0 > >> 52: 95 896 0 0 0 18 53 0 194 0 > 0 > >> 0 0 265 79 25 PCI-MSI 1574912-edge ens1f1-TxRx-0 > >> 53: 50 0 18 0 72 33 0 95 330 0 > 0 > >> 0 136 5 12 0 PCI-MSI 1574913-edge ens1f1-TxRx-1 > >> 54: 65 0 0 0 10 104 166 49 442 0 > 0 > >> 0 126 26 231 0 PCI-MSI 1574914-edge ens1f1-TxRx-2 > >> 55: 57 0 0 0 66 35 83 30 157 101 > 0 > >> 0 26 15 312 0 PCI-MSI 1574915-edge ens1f1-TxRx-3 > >> 56: 232 0 2071 0 16 21 0 54422 0 0 > >> 0 24 25 0 78 0 PCI-MSI 1574916-edge ens1f1 > >> > >> Note the interrupt rate has gone way down. During the 10s interval, > >> we only saw a handful of interrupts. > >> > >> Note that this patch was originally provided by Intel directly to > >> AT&T and Vyatta, but unfortunately I am unable to find records of the > exact author. > >> > >> We have been using this in production for more than a year. > >> > >> Fixes: af75078fece3 ("first public release") > >> Cc: stable@dpdk.org > >> > >> Signed-off-by: Luca Boccassi <bluca@debian.org> > >> --- > >> drivers/net/ixgbe/base/ixgbe_vf.c | 33 ++++++++++++++++--------------- > >> 1 file changed, 17 insertions(+), 16 deletions(-) > >> > >> diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c > >> b/drivers/net/ixgbe/base/ixgbe_vf.c > >> index 5b25a6b4d4..16086670b1 100644 > >> --- a/drivers/net/ixgbe/base/ixgbe_vf.c > >> +++ b/drivers/net/ixgbe/base/ixgbe_vf.c > >> @@ -586,7 +586,6 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw > *hw, > >> ixgbe_link_speed *speed, > >> s32 ret_val = IXGBE_SUCCESS; > >> u32 links_reg; > >> u32 in_msg = 0; > >> - UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); > >> > >> /* If we were hit with a reset drop the link */ > >> if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout) @@ -643,23 > >> +642,25 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, > >> ixgbe_link_speed *speed, > >> *speed = IXGBE_LINK_SPEED_UNKNOWN; > >> } > >> > >> - /* if the read failed it could just be a mailbox collision, best wait > >> - * until we are called again and don't report an error > >> - */ > >> - if (mbx->ops.read(hw, &in_msg, 1, 0)) > >> - goto out; > >> + if (autoneg_wait_to_complete) { > >> + /* if the read failed it could just be a mailbox collision, best > >> wait > >> + * until we are called again and don't report an error > >> + */ > >> + if (mbx->ops.read(hw, &in_msg, 1, 0)) > >> + goto out; > >> > >> - if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { > >> - /* msg is not CTS and is NACK we must have lost CTS status > >> */ > >> - if (in_msg & IXGBE_VT_MSGTYPE_NACK) > >> + if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) { > >> + /* msg is not CTS and is NACK we must have lost CTS > >> status */ > >> + if (in_msg & IXGBE_VT_MSGTYPE_NACK) > >> + ret_val = -1; > >> + goto out; > >> + } > >> + > >> + /* the pf is talking, if we timed out in the past we reinit */ > >> + if (!mbx->timeout) { > >> ret_val = -1; > >> - goto out; > >> - } > >> - > >> - /* the pf is talking, if we timed out in the past we reinit */ > >> - if (!mbx->timeout) { > >> - ret_val = -1; > >> - goto out; > >> + goto out; > >> + } > >> } > >> > >> /* if we passed all the tests above then the link is up and we no > >> -- > >> 2.18.0 > > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-11-08 3:03 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-08-15 14:14 [dpdk-dev] [PATCH] net/ixgbe: reduce PF mailbox interrupt rate Luca Boccassi 2018-09-26 10:21 ` Luca Boccassi 2018-11-07 9:17 ` Zhao1, Wei 2018-11-07 18:54 ` Chas Williams 2018-11-07 19:10 ` Luca Boccassi 2018-11-08 2:55 ` Zhao1, Wei 2018-11-08 2:58 ` Zhao1, Wei
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).