DPDK patches and discussions
 help / color / mirror / Atom feed
From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, ferruh.yigit@intel.com
Cc: pankaj.chauhan@nxp.com, Gagandeep Singh <g.singh@nxp.com>
Subject: [dpdk-dev] [PATCH v3 2/3] net/enetc: support packet parse type
Date: Fri, 28 Sep 2018 10:46:46 +0530	[thread overview]
Message-ID: <20180928051647.32341-3-g.singh@nxp.com> (raw)
In-Reply-To: <20180928051647.32341-1-g.singh@nxp.com>

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
 drivers/net/enetc/enetc_ethdev.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/enetc/enetc_ethdev.c b/drivers/net/enetc/enetc_ethdev.c
index 2d90d8fd5..3e1c934cb 100644
--- a/drivers/net/enetc/enetc_ethdev.c
+++ b/drivers/net/enetc/enetc_ethdev.c
@@ -28,6 +28,7 @@ static int enetc_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
 		uint16_t nb_tx_desc, unsigned int socket_id,
 		const struct rte_eth_txconf *tx_conf);
 static void enetc_tx_queue_release(void *txq);
+static const uint32_t *enetc_supported_ptypes_get(struct rte_eth_dev *dev);
 
 /*
  * The set of PCI devices this driver supports
@@ -50,6 +51,7 @@ static const struct eth_dev_ops enetc_ops = {
 	.rx_queue_release     = enetc_rx_queue_release,
 	.tx_queue_setup       = enetc_tx_queue_setup,
 	.tx_queue_release     = enetc_tx_queue_release,
+	.dev_supported_ptypes_get = enetc_supported_ptypes_get,
 };
 
 /**
@@ -165,6 +167,23 @@ enetc_dev_close(struct rte_eth_dev *dev __rte_unused)
 	PMD_INIT_FUNC_TRACE();
 }
 
+static const uint32_t *
+enetc_supported_ptypes_get(struct rte_eth_dev *dev __rte_unused)
+{
+        static const uint32_t ptypes[] = {
+                RTE_PTYPE_L2_ETHER,
+                RTE_PTYPE_L3_IPV4,
+                RTE_PTYPE_L3_IPV6,
+                RTE_PTYPE_L4_TCP,
+                RTE_PTYPE_L4_UDP,
+                RTE_PTYPE_L4_SCTP,
+                RTE_PTYPE_L4_ICMP,
+                RTE_PTYPE_UNKNOWN
+        };
+
+        return ptypes;
+}
+
 /* return 0 means link status changed, -1 means not changed */
 static int
 enetc_link_update(struct rte_eth_dev *dev, int wait_to_complete __rte_unused)
-- 
2.17.1

  parent reply	other threads:[~2018-09-28  5:17 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-06  5:54 [dpdk-dev] [PATCH 0/3] introduces the ENETC PMD Gagandeep Singh
2018-09-06  5:54 ` [dpdk-dev] [PATCH 1/3] doc: add usage doc for " Gagandeep Singh
2018-09-06  5:54 ` [dpdk-dev] [PATCH 2/3] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-09-19 12:15   ` Shreyansh Jain
2018-09-06  5:54 ` [dpdk-dev] [PATCH 3/3] net/enetc: enable Rx and Tx Gagandeep Singh
2018-09-13  9:41 ` [dpdk-dev] [PATCH v2 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-13  9:41   ` [dpdk-dev] [PATCH v2 1/3] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-09-21 13:22     ` Ferruh Yigit
2018-09-13  9:42   ` [dpdk-dev] [PATCH v2 2/3] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-09-21 13:27     ` Ferruh Yigit
2018-09-13  9:42   ` [dpdk-dev] [PATCH v2 3/3] net/enetc: enable Rx and Tx Gagandeep Singh
2018-09-19 12:26     ` Shreyansh Jain
2018-09-21 13:28     ` Ferruh Yigit
2018-09-28  5:16   ` [dpdk-dev] [PATCH v3 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-28  5:16     ` [dpdk-dev] [PATCH v3 1/3] net/enetc: enable Rx and Tx Gagandeep Singh
2018-09-28  5:16     ` Gagandeep Singh [this message]
2018-09-28  5:16     ` [dpdk-dev] [PATCH v3 3/3] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-09-28  5:26     ` [dpdk-dev] [PATCH v3 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-28  7:45     ` [dpdk-dev] [PATCH v4 0/4] " Gagandeep Singh
2018-09-28  7:45       ` [dpdk-dev] [PATCH v4 1/4] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-10-01 15:58         ` Ferruh Yigit
2018-09-28  7:45       ` [dpdk-dev] [PATCH v4 2/4] net/enetc: enable Rx and Tx Gagandeep Singh
2018-10-01 15:59         ` Ferruh Yigit
2018-09-28  7:46       ` [dpdk-dev] [PATCH v4 3/4] net/enetc: support packet parse type Gagandeep Singh
2018-09-28 10:17         ` Shreyansh Jain
2018-10-01 15:59           ` Ferruh Yigit
2018-09-28  7:46       ` [dpdk-dev] [PATCH v4 4/4] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-10-01 16:00         ` Ferruh Yigit
2018-09-28 10:36       ` [dpdk-dev] [PATCH v4 0/4] introduces the enetc PMD driver Shreyansh Jain
2018-10-03 13:36       ` [dpdk-dev] [PATCH v5 " Gagandeep Singh
2018-10-03 13:36         ` [dpdk-dev] [PATCH v5 1/4] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-10-03 19:47           ` Ferruh Yigit
2018-10-03 13:36         ` [dpdk-dev] [PATCH v5 2/4] net/enetc: enable Rx and Tx Gagandeep Singh
2018-10-03 13:36         ` [dpdk-dev] [PATCH v5 3/4] net/enetc: support packet parse type Gagandeep Singh
2018-10-03 13:36         ` [dpdk-dev] [PATCH v5 4/4] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-10-03 19:47           ` Ferruh Yigit
2018-10-03 19:48         ` [dpdk-dev] [PATCH v5 0/4] introduces the enetc PMD driver Ferruh Yigit
2018-11-21 17:36           ` Ferruh Yigit
2018-11-22 10:34             ` Shreyansh Jain
2018-11-22 12:08               ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180928051647.32341-3-g.singh@nxp.com \
    --to=g.singh@nxp.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=pankaj.chauhan@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).