From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Wenzhuo Lu <wenzhuo.lu@intel.com>,
Jingjing Wu <jingjing.wu@intel.com>,
Bernard Iremonger <bernard.iremonger@intel.com>,
John McNamara <john.mcnamara@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Beilei Xing <beilei.xing@intel.com>,
Qi Zhang <qi.z.zhang@intel.com>,
Olivier Matz <olivier.matz@6wind.com>
Cc: dev@dpdk.org, Ferruh Yigit <ferruh.yigit@intel.com>,
Hyong Youb Kim <hyonkim@cisco.com>,
John Daley <johndale@cisco.com>
Subject: [dpdk-dev] [PATCH] mbuf: clarify QINQ flag usage
Date: Tue, 2 Oct 2018 11:17:59 +0100 [thread overview]
Message-ID: <20181002101759.10395-1-ferruh.yigit@intel.com> (raw)
Update implementation that when PKT_RX_QINQ_STRIPPED mbuf ol_flags
set by PMD, PKT_RX_QINQ, PKT_RX_VLAN_STRIPPED & PKT_RX_VLAN
should be also set.
Clarify mbuf documentations that when PKT_RX_QINQ set PKT_RX_VLAN also
should be set.
So that appllication can rely on PKT_RX_QINQ flag to access both
mbuf.vlan_tci & mbuf.vlan_tci_outer
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
Cc: Hyong Youb Kim <hyonkim@cisco.com>
Cc: John Daley <johndale@cisco.com>
---
app/test-pmd/rxonly.c | 2 +-
doc/guides/nics/features.rst | 7 ++++---
drivers/net/i40e/i40e_rxtx.c | 3 ++-
lib/librte_mbuf/rte_mbuf.c | 1 +
lib/librte_mbuf/rte_mbuf.h | 5 +++--
5 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/app/test-pmd/rxonly.c b/app/test-pmd/rxonly.c
index a93d80612..08a5fc2cf 100644
--- a/app/test-pmd/rxonly.c
+++ b/app/test-pmd/rxonly.c
@@ -132,7 +132,7 @@ pkt_burst_receive(struct fwd_stream *fs)
printf(" - timestamp %"PRIu64" ", mb->timestamp);
if (ol_flags & PKT_RX_VLAN_STRIPPED)
printf(" - VLAN tci=0x%x", mb->vlan_tci);
- if (ol_flags & PKT_RX_QINQ_STRIPPED)
+ if (ol_flags & PKT_RX_QINQ)
printf(" - QinQ VLAN tci=0x%x, VLAN tci outer=0x%x",
mb->vlan_tci, mb->vlan_tci_outer);
if (mb->packet_type) {
diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index b085bda86..c0cbe3784 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -528,7 +528,7 @@ Supports VLAN offload to hardware.
* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_VLAN_STRIP,DEV_RX_OFFLOAD_VLAN_FILTER,DEV_RX_OFFLOAD_VLAN_EXTEND``.
* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_VLAN_INSERT``.
* **[implements] eth_dev_ops**: ``vlan_offload_set``.
-* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.vlan_tci``.
+* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.ol_flags:PKT_RX_VLAN`` ``mbuf.vlan_tci``.
* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_VLAN_STRIP``,
``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_VLAN_INSERT``.
* **[related] API**: ``rte_eth_dev_set_vlan_offload()``,
@@ -545,8 +545,9 @@ Supports QinQ (queue in queue) offload.
* **[uses] rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_QINQ_STRIP``.
* **[uses] rte_eth_txconf,rte_eth_txmode**: ``offloads:DEV_TX_OFFLOAD_QINQ_INSERT``.
* **[uses] mbuf**: ``mbuf.ol_flags:PKT_TX_QINQ_PKT``.
-* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_QINQ_STRIPPED``, ``mbuf.vlan_tci``,
- ``mbuf.vlan_tci_outer``.
+* **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_QINQ_STRIPPED``, ``mbuf.ol_flags:PKT_RX_QINQ``,
+ ``mbuf.ol_flags:PKT_RX_VLAN_STRIPPED``, ``mbuf.ol_flags:PKT_RX_VLAN``
+ ``mbuf.vlan_tci``, ``mbuf.vlan_tci_outer``.
* **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa:DEV_RX_OFFLOAD_QINQ_STRIP``,
``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_QINQ_INSERT``.
diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index 7c986d535..b2819f757 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -83,7 +83,8 @@ i40e_rxd_to_vlan_tci(struct rte_mbuf *mb, volatile union i40e_rx_desc *rxdp)
#ifndef RTE_LIBRTE_I40E_16BYTE_RX_DESC
if (rte_le_to_cpu_16(rxdp->wb.qword2.ext_status) &
(1 << I40E_RX_DESC_EXT_STATUS_L2TAG2P_SHIFT)) {
- mb->ol_flags |= PKT_RX_QINQ_STRIPPED;
+ mb->ol_flags |= PKT_RX_QINQ_STRIPPED | PKT_RX_QINQ |
+ PKT_RX_VLAN_STRIPPED | PKT_RX_VLAN;
mb->vlan_tci_outer = mb->vlan_tci;
mb->vlan_tci = rte_le_to_cpu_16(rxdp->wb.qword2.l2tag2_2);
PMD_RX_LOG(DEBUG, "Descriptor l2tag2_1: %u, l2tag2_2: %u",
diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index e714c5a59..05a5a17fe 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -297,6 +297,7 @@ const char *rte_get_rx_ol_flag_name(uint64_t mask)
case PKT_RX_IEEE1588_PTP: return "PKT_RX_IEEE1588_PTP";
case PKT_RX_IEEE1588_TMST: return "PKT_RX_IEEE1588_TMST";
case PKT_RX_QINQ_STRIPPED: return "PKT_RX_QINQ_STRIPPED";
+ case PKT_RX_QINQ: return "PKT_RX_QINQ";
case PKT_RX_LRO: return "PKT_RX_LRO";
case PKT_RX_TIMESTAMP: return "PKT_RX_TIMESTAMP";
case PKT_RX_SEC_OFFLOAD: return "PKT_RX_SEC_OFFLOAD";
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index a50b05c64..d018f19bd 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -140,7 +140,7 @@ extern "C" {
* The 2 vlans have been stripped by the hardware and their tci are
* saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
* This can only happen if vlan stripping is enabled in the RX
- * configuration of the PMD. If this flag is set,
+ * configuration of the PMD.
* When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
* PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
*/
@@ -170,7 +170,8 @@ extern "C" {
/**
* The RX packet is a double VLAN, and the outer tci has been
- * saved in in mbuf->vlan_tci_outer.
+ * saved in in mbuf->vlan_tci_outer. If PKT_RX_QINQ set, PKT_RX_VLAN
+ * also should be set and inner tci should be saved to mbuf->vlan_tci.
* If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
* headers have been stripped from mbuf data, else they are still
* present.
--
2.17.1
next reply other threads:[~2018-10-02 9:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-02 10:17 Ferruh Yigit [this message]
2018-10-02 9:44 ` Andrew Rybchenko
2018-10-02 10:08 ` Ferruh Yigit
2018-10-02 11:36 ` [dpdk-dev] [PATCH v2] " Ferruh Yigit
2018-10-02 10:40 ` Andrew Rybchenko
2018-10-03 15:19 ` [dpdk-dev] [PATCH v3] " Ferruh Yigit
2018-10-09 8:59 ` Olivier Matz
2018-10-09 9:48 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181002101759.10395-1-ferruh.yigit@intel.com \
--to=ferruh.yigit@intel.com \
--cc=beilei.xing@intel.com \
--cc=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
--cc=hyonkim@cisco.com \
--cc=jingjing.wu@intel.com \
--cc=john.mcnamara@intel.com \
--cc=johndale@cisco.com \
--cc=marko.kovacevic@intel.com \
--cc=olivier.matz@6wind.com \
--cc=qi.z.zhang@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).