DPDK patches and discussions
 help / color / mirror / Atom feed
From: Yongseok Koh <yskoh@mellanox.com>
To: Jack Min <jackmin@mellanox.com>
Cc: "ferruh.yigit@intel.com" <ferruh.yigit@intel.com>,
	Shahaf Shuler <shahafs@mellanox.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 3/3] net/mlx5: eswitch-modify TTL actions
Date: Wed, 3 Oct 2018 20:07:02 +0000	[thread overview]
Message-ID: <20181003200652.GC26206@mtidpdk.mti.labs.mlnx> (raw)
In-Reply-To: <20180925134718.18945-4-jackmin@mellanox.com>

On Tue, Sep 25, 2018 at 09:47:18PM +0800, Xiaoyu Min wrote:
> Offload following modify TTL actions to E-Swtich via
> TC-Flower driver
> 
> - RTE_FLOW_ACTION_TYPE_SET_TTL
> - RTE_FLOW_ACTION_TYPE_DEC_TTL
> 
> The corresponding IP protocol rte_flow_item_ipv[4|6]
> must be present in rte_flow pattern otherwith PMD
> return error
> 
> Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
> ---

As it is quite similar to the other patch of IP addr and UDP/TCP port, I have
the same comments on this patch too.

Two more things.

1) commit title.
'eswitch' isn't allowed. Like you mentioned in the commit message, it is
officially E-Switch. And I'm curious why '-' is needed for the title.

2) MLX5_ACTION_*
As there are a few more pending patches which add new actions - encap/decap and
multi-table, we may have to have final rebasing in order at the last moment.


Thanks,
Yongseok

>  drivers/net/mlx5/mlx5_flow.h     |  2 +
>  drivers/net/mlx5/mlx5_flow_tcf.c | 74 +++++++++++++++++++++++++++++++-
>  2 files changed, 74 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index be182a643..5237e31dd 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -93,6 +93,8 @@
>  #define MLX5_ACTION_SET_IPV6_DST (1u << 14)
>  #define MLX5_ACTION_SET_TP_SRC (1u << 15)
>  #define MLX5_ACTION_SET_TP_DST (1u << 16)
> +#define MLX5_ACTION_SET_TTL (1u << 17)
> +#define MLX5_ACTION_DEC_TTL (1u << 18)
>  
>  /* possible L3 layers protocols filtering. */
>  #define MLX5_IP_PROTOCOL_TCP 6
> diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
> index 85c92f369..af88c4a0d 100644
> --- a/drivers/net/mlx5/mlx5_flow_tcf.c
> +++ b/drivers/net/mlx5/mlx5_flow_tcf.c
> @@ -217,6 +217,10 @@ struct tc_pedit_sel {
>  #define TP_PORT_LEN 2 /* Transport Port (UDP/TCP) Length */
>  #endif
>  
> +#ifndef TTL_LEN
> +#define TTL_LEN 1
> +#endif
> +
>  /** Empty masks for known item types. */
>  static const union {
>  	struct rte_flow_item_port_id port_id;
> @@ -297,7 +301,9 @@ struct flow_tcf_ptoi {
>  		(act) == RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC  || \
>  		(act) == RTE_FLOW_ACTION_TYPE_SET_IPV6_DST  || \
>  		(act) == RTE_FLOW_ACTION_TYPE_SET_TP_SRC    || \
> -		(act) == RTE_FLOW_ACTION_TYPE_SET_TP_DST) ?    \
> +		(act) == RTE_FLOW_ACTION_TYPE_SET_TP_DST    || \
> +		(act) == RTE_FLOW_ACTION_TYPE_SET_TTL       || \
> +		(act) == RTE_FLOW_ACTION_TYPE_DEC_TTL) ?       \
>  		1 : 0; })
>  #define MAX_PEDIT_KEYS (128)
>  #define SZ_PEDIT_KEY_VAL (4)
> @@ -321,6 +327,34 @@ flow_tcf_calc_pedit_keys(const uint64_t size)
>  	return keys;
>  }
>  
> +static void
> +flow_tcf_pedit_key_set_dec_ttl(const struct rte_flow_action *actions,
> +				struct pedit_parser *p_parser,
> +				uint64_t item_flags)
> +{
> +	int idx = p_parser->sel.nkeys;
> +
> +	p_parser->keys[idx].mask = 0xFFFFFF00;
> +	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4) {
> +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP4;
> +		p_parser->keys[idx].off = 8; /* IPv4 TTL Offset */
> +	}
> +	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV6) {
> +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP6;
> +		p_parser->keys[idx].off = 7; /* IPv6 HopLimit Offset */
> +	}
> +	if (actions->type == RTE_FLOW_ACTION_TYPE_DEC_TTL) {
> +		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_ADD;
> +		p_parser->keys[idx].val = 0xFF;
> +	} else {
> +		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
> +		p_parser->keys[idx].val =
> +			((const struct rte_flow_action_set_ttl *)
> +			 actions->conf)->ttl_value;
> +	}
> +	p_parser->sel.nkeys = (++idx);
> +}
> +
>  static void
>  flow_tcf_pedit_key_set_tp_port(const struct rte_flow_action *actions,
>  				struct pedit_parser *p_parser,
> @@ -408,6 +442,11 @@ flow_tcf_create_pedit_mnl_msg(struct nlmsghdr *nl,
>  			flow_tcf_pedit_key_set_tp_port(*actions,
>  							&p_parser, item_flags);
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> +			flow_tcf_pedit_key_set_dec_ttl(*actions,
> +							&p_parser, item_flags);
> +			break;
>  		default:
>  			goto pedit_mnl_msg_done;
>  		}
> @@ -488,6 +527,14 @@ flow_tcf_get_pedit_actions_size(const struct rte_flow_action **actions,
>  			keys += flow_tcf_calc_pedit_keys(TP_PORT_LEN);
>  			flags |= MLX5_ACTION_SET_TP_DST;
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +			keys += flow_tcf_calc_pedit_keys(TTL_LEN);
> +			flags |= MLX5_ACTION_SET_TTL;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> +			keys += flow_tcf_calc_pedit_keys(TTL_LEN);
> +			flags |= MLX5_ACTION_DEC_TTL;
> +			break;
>  		default:
>  			goto get_pedit_action_size_done;
>  		}
> @@ -988,13 +1035,20 @@ flow_tcf_validate(struct rte_eth_dev *dev,
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
>  			action_flags |= MLX5_ACTION_SET_TP_DST;
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +			action_flags |= MLX5_ACTION_SET_TTL;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> +			action_flags |= MLX5_ACTION_DEC_TTL;
> +			break;
>  		default:
>  			return rte_flow_error_set(error, ENOTSUP,
>  						  RTE_FLOW_ERROR_TYPE_ACTION,
>  						  actions,
>  						  "action not supported");
>  		}
> -		if (IS_MODIFY_ACTION(actions->type)) {
> +		if (IS_MODIFY_ACTION(actions->type) &&
> +		    actions->type != RTE_FLOW_ACTION_TYPE_DEC_TTL) {
>  			if (!actions->conf)
>  				return rte_flow_error_set(error, ENOTSUP,
>  						RTE_FLOW_ERROR_TYPE_ACTION_CONF,
> @@ -1029,6 +1083,16 @@ flow_tcf_validate(struct rte_eth_dev *dev,
>  						"no TCP/UDP item found in"
>  						" pattern");
>  	}
> +	if (action_flags &
> +	   (MLX5_ACTION_SET_TTL | MLX5_ACTION_DEC_TTL)) {
> +		if (!(item_flags &
> +		     (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
> +		      MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
> +			return rte_flow_error_set(error, ENOTSUP,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  actions,
> +						  "no IP found in pattern");
> +	}
>  	return 0;
>  }
>  
> @@ -1178,6 +1242,8 @@ flow_tcf_get_actions_and_size(const struct rte_flow_action actions[],
>  		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
>  			size += flow_tcf_get_pedit_actions_size(&actions,
>  								&flags);
>  			break;
> @@ -1451,6 +1517,7 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
>  						  RTE_BE16(0x0fff)));
>  			break;
>  		case RTE_FLOW_ITEM_TYPE_IPV4:
> +			item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
>  			mask.ipv4 = flow_tcf_item_mask
>  				(items, &rte_flow_item_ipv4_mask,
>  				 &flow_tcf_mask_supported.ipv4,
> @@ -1490,6 +1557,7 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
>  			}
>  			break;
>  		case RTE_FLOW_ITEM_TYPE_IPV6:
> +			item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
>  			mask.ipv6 = flow_tcf_item_mask
>  				(items, &rte_flow_item_ipv6_mask,
>  				 &flow_tcf_mask_supported.ipv6,
> @@ -1718,6 +1786,8 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
>  		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
>  			na_act_index =
>  				mnl_attr_nest_start(nlh, na_act_index_cur++);
>  			flow_tcf_create_pedit_mnl_msg(nlh,
> -- 
> 2.17.1
> 

  reply	other threads:[~2018-10-03 20:07 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-25 13:47 [dpdk-dev] [PATCH 0/3] ethdev: add generic TTL rewrite actions Xiaoyu Min
2018-09-25 13:47 ` [dpdk-dev] [PATCH 1/3] " Xiaoyu Min
2018-09-25 13:47 ` [dpdk-dev] [PATCH 2/3] app/testpmd: add commands of modify TTL Xiaoyu Min
2018-09-25 13:47 ` [dpdk-dev] [PATCH 3/3] net/mlx5: eswitch-modify TTL actions Xiaoyu Min
2018-10-03 20:07   ` Yongseok Koh [this message]
2018-10-08  6:57     ` Xiaoyu Min
2018-09-25 14:37 ` [dpdk-dev] [PATCH v2 0/3] ethdev: add generic TTL rewrite actions Xiaoyu Min
2018-09-25 14:37   ` [dpdk-dev] [PATCH v2 1/3] " Xiaoyu Min
2018-10-03 19:50     ` Yongseok Koh
2018-09-25 14:37   ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: add commands of modify TTL Xiaoyu Min
2018-10-03 19:51     ` Yongseok Koh
2018-09-25 14:37   ` [dpdk-dev] [PATCH v2 3/3] net/mlx5: eswitch-modify TTL actions Xiaoyu Min
2018-10-05 12:48     ` Ferruh Yigit
2018-10-05 18:17       ` Yongseok Koh
2018-10-03 20:35   ` [dpdk-dev] [PATCH v2 0/3] ethdev: add generic TTL rewrite actions Thomas Monjalon
2018-10-05 12:52   ` Ferruh Yigit
2018-10-08  2:30     ` Xiaoyu Min
2018-10-10 13:05   ` [dpdk-dev] [PATCH v3 " Jack Min
2018-10-10 13:05     ` [dpdk-dev] [PATCH v3 1/3] " Jack Min
2018-10-10 13:05     ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: add commands of modify TTL Jack Min
2018-10-10 13:06     ` [dpdk-dev] [PATCH v3 3/3] net/mlx5: rewrite TTL by E-Switch Jack Min
2018-10-11  5:47       ` Yongseok Koh
2018-10-11 13:27     ` [dpdk-dev] [PATCH v4 0/3] ethdev: add generic TTL rewrite actions Jack Min
2018-10-11 13:27       ` [dpdk-dev] [PATCH v4 1/3] " Jack Min
2018-10-12 14:12         ` Ferruh Yigit
2018-10-13  2:16           ` Jack Min
2018-10-11 13:27       ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: add commands of modify TTL Jack Min
2018-10-11 13:27       ` [dpdk-dev] [PATCH v4 3/3] net/mlx5: rewrite TTL by E-Switch Jack Min
2018-10-13  3:24       ` [dpdk-dev] [PATCH v5 0/3] ethdev: add generic TTL rewrite actions Jack Min
2018-10-13  3:24         ` [dpdk-dev] [PATCH v5 1/3] " Jack Min
2018-10-14  7:35           ` Andrew Rybchenko
2018-10-16  2:03             ` Jack Min
2018-10-13  3:24         ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: add commands of modify TTL Jack Min
2018-10-13  3:24         ` [dpdk-dev] [PATCH v5 3/3] net/mlx5: rewrite TTL by E-Switch Jack Min
2018-10-16  8:14         ` [dpdk-dev] [PATCH v6 0/3] ethdev: add generic TTL rewrite actions Jack Min
2018-10-16  8:14           ` [dpdk-dev] [PATCH v6 1/3] " Jack Min
2018-10-16  8:25             ` Andrew Rybchenko
2018-10-16  8:48               ` Ferruh Yigit
2018-10-16  8:14           ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: add commands of modify TTL Jack Min
2018-10-16  8:14           ` [dpdk-dev] [PATCH v6 3/3] net/mlx5: rewrite TTL by E-Switch Jack Min

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181003200652.GC26206@mtidpdk.mti.labs.mlnx \
    --to=yskoh@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jackmin@mellanox.com \
    --cc=shahafs@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).