DPDK patches and discussions
 help / color / mirror / Atom feed
From: Shreyansh Jain <shreyansh.jain@nxp.com>
To: ferruh.yigit@intel.com
Cc: anatoly.burakov@intel.com, dev@dpdk.org,
	Shreyansh Jain <shreyansh.jain@nxp.com>
Subject: [dpdk-dev] [PATCH v2 4/5] dpaa: enable dpaax library
Date: Tue,  9 Oct 2018 16:55:47 +0530	[thread overview]
Message-ID: <20181009112548.7025-5-shreyansh.jain@nxp.com> (raw)
In-Reply-To: <20181009112548.7025-1-shreyansh.jain@nxp.com>

With this patch, dpaa bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.

This patch impacts mempool/dpaa, event/dpaa and net/dpaa as
they are dependent on the bus/dpaa and thus impact linkage of
libraries.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
---
 drivers/bus/dpaa/Makefile           | 1 +
 drivers/bus/dpaa/dpaa_bus.c         | 4 ++++
 drivers/bus/dpaa/meson.build        | 2 +-
 drivers/bus/dpaa/rte_dpaa_bus.h     | 6 ++++++
 drivers/crypto/dpaa_sec/Makefile    | 1 +
 drivers/crypto/dpaa_sec/dpaa_sec.c  | 6 ++++++
 drivers/event/dpaa/Makefile         | 1 +
 drivers/mempool/dpaa/Makefile       | 1 +
 drivers/mempool/dpaa/dpaa_mempool.c | 4 ++++
 drivers/mempool/dpaa/dpaa_mempool.h | 4 +---
 drivers/net/dpaa/Makefile           | 1 +
 mk/rte.app.mk                       | 1 +
 12 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/dpaa/Makefile b/drivers/bus/dpaa/Makefile
index bffaa9d92..5eb7c24db 100644
--- a/drivers/bus/dpaa/Makefile
+++ b/drivers/bus/dpaa/Makefile
@@ -48,5 +48,6 @@ SRCS-$(CONFIG_RTE_LIBRTE_DPAA_BUS) += \
 LDLIBS += -lpthread
 LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
 LDLIBS += -lrte_ethdev
+LDLIBS += -lrte_common_dpaax
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/bus/dpaa/dpaa_bus.c b/drivers/bus/dpaa/dpaa_bus.c
index 49cd04dbb..b373742e7 100644
--- a/drivers/bus/dpaa/dpaa_bus.c
+++ b/drivers/bus/dpaa/dpaa_bus.c
@@ -34,6 +34,7 @@
 
 #include <rte_dpaa_bus.h>
 #include <rte_dpaa_logs.h>
+#include <dpaax_iova_table.h>
 
 #include <fsl_usd.h>
 #include <fsl_qman.h>
@@ -546,6 +547,9 @@ rte_dpaa_bus_probe(void)
 		fclose(svr_file);
 	}
 
+	/* And initialize the PA->VA translation table */
+	dpaax_iova_table_populate();
+
 	/* For each registered driver, and device, call the driver->probe */
 	TAILQ_FOREACH(dev, &rte_dpaa_bus.device_list, next) {
 		TAILQ_FOREACH(drv, &rte_dpaa_bus.driver_list, next) {
diff --git a/drivers/bus/dpaa/meson.build b/drivers/bus/dpaa/meson.build
index d10b62c03..42676fbc5 100644
--- a/drivers/bus/dpaa/meson.build
+++ b/drivers/bus/dpaa/meson.build
@@ -5,7 +5,7 @@ if host_machine.system() != 'linux'
         build = false
 endif
 
-deps += ['eventdev']
+deps += ['common_dpaax', 'eventdev']
 sources = files('base/fman/fman.c',
 		'base/fman/fman_hw.c',
 		'base/fman/netcfg_layer.c',
diff --git a/drivers/bus/dpaa/rte_dpaa_bus.h b/drivers/bus/dpaa/rte_dpaa_bus.h
index 15dc6a4ac..1d580a000 100644
--- a/drivers/bus/dpaa/rte_dpaa_bus.h
+++ b/drivers/bus/dpaa/rte_dpaa_bus.h
@@ -8,6 +8,7 @@
 
 #include <rte_bus.h>
 #include <rte_mempool.h>
+#include <dpaax_iova_table.h>
 
 #include <fsl_usd.h>
 #include <fsl_qman.h>
@@ -110,6 +111,11 @@ extern struct dpaa_memseg_list rte_dpaa_memsegs;
 static inline void *rte_dpaa_mem_ptov(phys_addr_t paddr)
 {
 	struct dpaa_memseg *ms;
+	void *va;
+
+	va = dpaax_iova_table_get_va(paddr);
+	if (likely(va != NULL))
+		return va;
 
 	/* Check if the address is already part of the memseg list internally
 	 * maintained by the dpaa driver.
diff --git a/drivers/crypto/dpaa_sec/Makefile b/drivers/crypto/dpaa_sec/Makefile
index 9be447041..674a7a398 100644
--- a/drivers/crypto/dpaa_sec/Makefile
+++ b/drivers/crypto/dpaa_sec/Makefile
@@ -38,5 +38,6 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_SEC) += dpaa_sec.c
 
 LDLIBS += -lrte_bus_dpaa
 LDLIBS += -lrte_mempool_dpaa
+LDLIBS += -lrte_common_dpaax
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c b/drivers/crypto/dpaa_sec/dpaa_sec.c
index 7c0459f9f..54f1913f2 100644
--- a/drivers/crypto/dpaa_sec/dpaa_sec.c
+++ b/drivers/crypto/dpaa_sec/dpaa_sec.c
@@ -107,6 +107,12 @@ dpaa_mem_vtop(void *vaddr)
 static inline void *
 dpaa_mem_ptov(rte_iova_t paddr)
 {
+	void *va;
+
+	va = (void *)dpaax_iova_table_get_va(paddr);
+	if (likely(va))
+		return va;
+
 	return rte_mem_iova2virt(paddr);
 }
 
diff --git a/drivers/event/dpaa/Makefile b/drivers/event/dpaa/Makefile
index ddd855227..6f93e7f40 100644
--- a/drivers/event/dpaa/Makefile
+++ b/drivers/event/dpaa/Makefile
@@ -34,5 +34,6 @@ LDLIBS += -lrte_mempool_dpaa
 LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
 LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
 LDLIBS += -lrte_eventdev -lrte_pmd_dpaa -lrte_bus_vdev
+LDLIBS += -lrte_common_dpaax
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/mempool/dpaa/Makefile b/drivers/mempool/dpaa/Makefile
index da8da1e90..9cf36856c 100644
--- a/drivers/mempool/dpaa/Makefile
+++ b/drivers/mempool/dpaa/Makefile
@@ -31,5 +31,6 @@ SRCS-$(CONFIG_RTE_LIBRTE_DPAA_MEMPOOL) += dpaa_mempool.c
 
 LDLIBS += -lrte_bus_dpaa
 LDLIBS += -lrte_eal -lrte_mempool -lrte_ring
+LDLIBS += -lrte_common_dpaax
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/mempool/dpaa/dpaa_mempool.c b/drivers/mempool/dpaa/dpaa_mempool.c
index 1c121223b..b05fb7b9d 100644
--- a/drivers/mempool/dpaa/dpaa_mempool.c
+++ b/drivers/mempool/dpaa/dpaa_mempool.c
@@ -26,6 +26,7 @@
 #include <rte_ring.h>
 
 #include <dpaa_mempool.h>
+#include <dpaax_iova_table.h>
 
 /* List of all the memseg information locally maintained in dpaa driver. This
  * is to optimize the PA_to_VA searches until a better mechanism (algo) is
@@ -285,6 +286,9 @@ dpaa_populate(struct rte_mempool *mp, unsigned int max_objs,
 		return 0;
 	}
 
+	/* Update the PA-VA Table */
+	dpaax_iova_table_update(paddr, vaddr, len);
+
 	bp_info = DPAA_MEMPOOL_TO_POOL_INFO(mp);
 	total_elt_sz = mp->header_size + mp->elt_size + mp->trailer_size;
 
diff --git a/drivers/mempool/dpaa/dpaa_mempool.h b/drivers/mempool/dpaa/dpaa_mempool.h
index 092f326cb..533e1c6e2 100644
--- a/drivers/mempool/dpaa/dpaa_mempool.h
+++ b/drivers/mempool/dpaa/dpaa_mempool.h
@@ -43,10 +43,8 @@ struct dpaa_bp_info {
 };
 
 static inline void *
-DPAA_MEMPOOL_PTOV(struct dpaa_bp_info *bp_info, uint64_t addr)
+DPAA_MEMPOOL_PTOV(struct dpaa_bp_info *bp_info __rte_unused, uint64_t addr)
 {
-	if (bp_info->ptov_off)
-		return ((void *) (size_t)(addr + bp_info->ptov_off));
 	return rte_dpaa_mem_ptov(addr);
 }
 
diff --git a/drivers/net/dpaa/Makefile b/drivers/net/dpaa/Makefile
index d7a0a50c5..1c4f7d914 100644
--- a/drivers/net/dpaa/Makefile
+++ b/drivers/net/dpaa/Makefile
@@ -38,6 +38,7 @@ LDLIBS += -lrte_bus_dpaa
 LDLIBS += -lrte_mempool_dpaa
 LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
 LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
+LDLIBS += -lrte_common_dpaax
 
 # install this header file
 SYMLINK-$(CONFIG_RTE_LIBRTE_DPAA_PMD)-include := rte_pmd_dpaa.h
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 32579e4b7..15097995e 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -115,6 +115,7 @@ ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_BUCKET) += -lrte_mempool_bucket
 _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_STACK)  += -lrte_mempool_stack
 ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_COMMON_DPAAX)   += -lrte_common_dpaax
 _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_MEMPOOL)   += -lrte_mempool_dpaa
 endif
 ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
-- 
2.17.1

  parent reply	other threads:[~2018-10-09 11:26 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-25 12:54 [dpdk-dev] [PATCH 0/5] Add a PA-VA Translation table for DPAAx Shreyansh Jain
2018-09-25 12:54 ` [dpdk-dev] [PATCH 1/5] bus/fslmc: fix physical addressing check Shreyansh Jain
2018-09-25 12:54 ` [dpdk-dev] [PATCH 2/5] drivers: common as dependency for bus Shreyansh Jain
2018-09-25 12:54 ` [dpdk-dev] [PATCH 3/5] common/dpaax: add library for PA VA translation table Shreyansh Jain
2018-09-25 13:28   ` Burakov, Anatoly
2018-09-25 13:39     ` Shreyansh Jain
2018-09-25 13:51       ` Burakov, Anatoly
2018-09-25 14:00         ` Shreyansh Jain
2018-09-25 14:08           ` Burakov, Anatoly
2018-09-26 10:16             ` Burakov, Anatoly
2018-10-09 10:45       ` Shreyansh Jain
2018-10-11  9:03         ` Burakov, Anatoly
2018-10-11 10:02           ` Shreyansh Jain
2018-10-11 10:07             ` Shreyansh Jain
2018-10-11 10:13               ` Burakov, Anatoly
2018-10-11 10:39                 ` Shreyansh Jain
2018-10-11 10:46                   ` Burakov, Anatoly
2018-10-11 10:09             ` Burakov, Anatoly
2018-09-25 12:54 ` [dpdk-dev] [PATCH 4/5] dpaa: enable dpaax library Shreyansh Jain
2018-09-25 12:54 ` [dpdk-dev] [PATCH 5/5] fslmc: " Shreyansh Jain
2018-10-09 11:25 ` [dpdk-dev] [PATCH v2 0/5] Add a PA-VA Translation table for DPAAx Shreyansh Jain
2018-10-09 11:25   ` [dpdk-dev] [PATCH v2 1/5] bus/fslmc: fix physical addressing check Shreyansh Jain
2018-10-12  9:01     ` Pavan Nikhilesh
2018-10-12 10:44       ` Shreyansh Jain
2018-10-12 16:29         ` Pavan Nikhilesh
2018-10-09 11:25   ` [dpdk-dev] [PATCH v2 2/5] drivers: common as dependency for bus Shreyansh Jain
2018-10-09 11:25   ` [dpdk-dev] [PATCH v2 3/5] common/dpaax: add library for PA VA translation table Shreyansh Jain
2018-10-09 11:25   ` Shreyansh Jain [this message]
2018-10-09 11:25   ` [dpdk-dev] [PATCH v2 5/5] fslmc: enable dpaax library Shreyansh Jain
2018-10-13 12:21   ` [dpdk-dev] [PATCH v3 0/5] Add a PA-VA Translation table for DPAAx Shreyansh Jain
2018-10-13 12:21     ` [dpdk-dev] [PATCH v3 1/5] bus/fslmc: fix physical addressing check Shreyansh Jain
2018-10-13 16:08       ` Pavan Nikhilesh
2018-10-15  6:36         ` Shreyansh Jain
2018-10-13 12:21     ` [dpdk-dev] [PATCH v3 2/5] drivers: common as dependency for bus Shreyansh Jain
2018-10-13 12:21     ` [dpdk-dev] [PATCH v3 3/5] common/dpaax: add library for PA VA translation table Shreyansh Jain
2018-10-13 12:21     ` [dpdk-dev] [PATCH v3 4/5] dpaa: enable dpaax library Shreyansh Jain
2018-10-13 12:21     ` [dpdk-dev] [PATCH v3 5/5] fslmc: " Shreyansh Jain
2018-10-15  6:41     ` [dpdk-dev] [PATCH v4 0/5] Add a PA-VA Translation table for DPAAx Shreyansh Jain
2018-10-15  6:41       ` [dpdk-dev] [PATCH v4 1/5] bus/fslmc: fix physical addressing check Shreyansh Jain
2018-10-15  6:41       ` [dpdk-dev] [PATCH v4 2/5] drivers: common as dependency for bus Shreyansh Jain
2018-10-15  6:42       ` [dpdk-dev] [PATCH v4 3/5] common/dpaax: add library for PA VA translation table Shreyansh Jain
2018-10-15  6:42       ` [dpdk-dev] [PATCH v4 4/5] dpaa: enable dpaax library Shreyansh Jain
2018-10-15  6:42       ` [dpdk-dev] [PATCH v4 5/5] fslmc: " Shreyansh Jain
2018-10-15 12:01       ` [dpdk-dev] [PATCH v5 0/5] Shreyansh Jain
2018-10-15 12:01         ` [dpdk-dev] [PATCH v5 1/5] bus/fslmc: fix physical addressing check Shreyansh Jain
2018-10-16 10:02           ` Thomas Monjalon
2018-10-15 12:01         ` [dpdk-dev] [PATCH v5 2/5] drivers: common as dependency for bus Shreyansh Jain
2018-10-15 12:01         ` [dpdk-dev] [PATCH v5 3/5] common/dpaax: add library for PA VA translation table Shreyansh Jain
2018-10-15 23:17           ` Thomas Monjalon
2018-10-15 12:01         ` [dpdk-dev] [PATCH v5 4/5] dpaa: enable dpaax library Shreyansh Jain
2018-10-15 12:01         ` [dpdk-dev] [PATCH v5 5/5] fslmc: " Shreyansh Jain
2018-10-16 10:18         ` [dpdk-dev] [PATCH v5 0/5] Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181009112548.7025-5-shreyansh.jain@nxp.com \
    --to=shreyansh.jain@nxp.com \
    --cc=anatoly.burakov@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).