DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jack Min <jackmin@mellanox.com>
To: Shahaf Shuler <shahafs@mellanox.com>, Yongseok Koh <yskoh@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v3 3/3] net/mlx5: rewrite TTL by E-Switch
Date: Wed, 10 Oct 2018 13:06:00 +0000	[thread overview]
Message-ID: <20181010130524.23590-4-jackmin@mellanox.com> (raw)
In-Reply-To: <20181010130524.23590-1-jackmin@mellanox.com>

Offload following modify TTL actions to E-Switch via
TC-Flower driver

- RTE_FLOW_ACTION_TYPE_SET_TTL
- RTE_FLOW_ACTION_TYPE_DEC_TTL

The corresponding IP protocol rte_flow_item_ipv[4|6]
must be present in rte_flow pattern otherwith PMD
return error

The example testpmd commands are:

    flow create 0 transfer ingress
         pattern eth / ipv4 / udp dst is 7000 / end
	 actions dec_ttl /
	 port_id id 1 / end

    flow create 0 transfer ingress
         pattern eth / ipv4 / udp dst is 7001 / end
	 actions set_ttl ttl_value 10 /
	 port_id id 1 / end

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow.h     |  2 +
 drivers/net/mlx5/mlx5_flow_tcf.c | 84 +++++++++++++++++++++++++++++++-
 2 files changed, 84 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
index cbb8c56c8..0ad8c12ea 100644
--- a/drivers/net/mlx5/mlx5_flow.h
+++ b/drivers/net/mlx5/mlx5_flow.h
@@ -84,6 +84,8 @@
 #define MLX5_FLOW_ACTION_SET_IPV6_DST (1u << 14)
 #define MLX5_FLOW_ACTION_SET_TP_SRC (1u << 15)
 #define MLX5_FLOW_ACTION_SET_TP_DST (1u << 16)
+#define MLX5_FLOW_ACTION_SET_TTL (1u << 17)
+#define MLX5_FLOW_ACTION_DEC_TTL (1u << 18)
 
 #define MLX5_FLOW_FATE_ACTIONS \
 	(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | MLX5_FLOW_ACTION_RSS)
diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
index 65e8a4b3f..af8a68529 100644
--- a/drivers/net/mlx5/mlx5_flow_tcf.c
+++ b/drivers/net/mlx5/mlx5_flow_tcf.c
@@ -217,6 +217,10 @@ struct tc_pedit_sel {
 #define TP_PORT_LEN 2 /* Transport Port (UDP/TCP) Length */
 #endif
 
+#ifndef TTL_LEN
+#define TTL_LEN 1
+#endif
+
 /** Empty masks for known item types. */
 static const union {
 	struct rte_flow_item_port_id port_id;
@@ -299,13 +303,16 @@ struct flow_tcf_ptoi {
 				MLX5_FLOW_ACTION_SET_IPV6_SRC | \
 				MLX5_FLOW_ACTION_SET_IPV6_DST | \
 				MLX5_FLOW_ACTION_SET_TP_SRC   | \
-				MLX5_FLOW_ACTION_SET_TP_DST)
+				MLX5_FLOW_ACTION_SET_TP_DST   | \
+				MLX5_FLOW_ACTION_SET_TTL      | \
+				MLX5_FLOW_ACTION_DEC_TTL)
 
 #define MLX5_TCF_CONFIG_ACTIONS (MLX5_FLOW_ACTION_PORT_ID | \
 				 MLX5_FLOW_ACTION_OF_PUSH_VLAN | \
 				 MLX5_FLOW_ACTION_OF_SET_VLAN_VID | \
 				 MLX5_FLOW_ACTION_OF_SET_VLAN_PCP | \
-				 MLX5_TCF_PEDIT_ACTIONS)
+				 (MLX5_TCF_PEDIT_ACTIONS & \
+				  ~MLX5_FLOW_ACTION_DEC_TTL))
 
 #define MAX_PEDIT_KEYS (128)
 #define SZ_PEDIT_KEY_VAL (4)
@@ -338,6 +345,46 @@ flow_tcf_calc_pedit_keys(const uint64_t size)
 	return keys;
 }
 
+/**
+ * Set pedit key of decrease/set ttl
+ *
+ * @param[in] actions
+ *   pointer to action specification
+ * @param[in,out] p_parser
+ *   pointer to pedit_parser
+ * @param[in] item_flags
+ *   flags of all items presented
+ */
+static void
+flow_tcf_pedit_key_set_dec_ttl(const struct rte_flow_action *actions,
+				struct pedit_parser *p_parser,
+				uint64_t item_flags)
+{
+	int idx = p_parser->sel.nkeys;
+
+	p_parser->keys[idx].mask = 0xFFFFFF00;
+	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4) {
+		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP4;
+		p_parser->keys[idx].off =
+			offsetof(struct ipv4_hdr, time_to_live);
+	}
+	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV6) {
+		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP6;
+		p_parser->keys[idx].off =
+			offsetof(struct ipv6_hdr, hop_limits);
+	}
+	if (actions->type == RTE_FLOW_ACTION_TYPE_DEC_TTL) {
+		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_ADD;
+		p_parser->keys[idx].val = 0x000000FF;
+	} else {
+		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
+		p_parser->keys[idx].val =
+			(__u32)((const struct rte_flow_action_set_ttl *)
+			 actions->conf)->ttl_value;
+	}
+	p_parser->sel.nkeys = (++idx);
+}
+
 /**
  * Set pedit key of transport (TCP/UDP) port value
  *
@@ -477,6 +524,11 @@ flow_tcf_create_pedit_mnl_msg(struct nlmsghdr *nl,
 			flow_tcf_pedit_key_set_tp_port(*actions,
 							&p_parser, item_flags);
 			break;
+		case RTE_FLOW_ACTION_TYPE_SET_TTL:
+		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+			flow_tcf_pedit_key_set_dec_ttl(*actions,
+							&p_parser, item_flags);
+			break;
 		default:
 			goto pedit_mnl_msg_done;
 		}
@@ -557,6 +609,14 @@ flow_tcf_get_pedit_actions_size(const struct rte_flow_action **actions,
 			keys += flow_tcf_calc_pedit_keys(TP_PORT_LEN);
 			flags |= MLX5_FLOW_ACTION_SET_TP_DST;
 			break;
+		case RTE_FLOW_ACTION_TYPE_SET_TTL:
+			keys += flow_tcf_calc_pedit_keys(TTL_LEN);
+			flags |= MLX5_FLOW_ACTION_SET_TTL;
+			break;
+		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+			keys += flow_tcf_calc_pedit_keys(TTL_LEN);
+			flags |= MLX5_FLOW_ACTION_DEC_TTL;
+			break;
 		default:
 			goto get_pedit_action_size_done;
 		}
@@ -1075,6 +1135,12 @@ flow_tcf_validate(struct rte_eth_dev *dev,
 		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
 			current_action_flag = MLX5_FLOW_ACTION_SET_TP_DST;
 			break;
+		case RTE_FLOW_ACTION_TYPE_SET_TTL:
+			current_action_flag = MLX5_FLOW_ACTION_SET_TTL;
+			break;
+		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+			current_action_flag = MLX5_FLOW_ACTION_DEC_TTL;
+			break;
 		default:
 			return rte_flow_error_set(error, ENOTSUP,
 						  RTE_FLOW_ERROR_TYPE_ACTION,
@@ -1169,6 +1235,16 @@ flow_tcf_validate(struct rte_eth_dev *dev,
 		return rte_flow_error_set(error, EINVAL,
 					  RTE_FLOW_ERROR_TYPE_ACTION, actions,
 					  "no fate action is found");
+	if (action_flags &
+	   (MLX5_FLOW_ACTION_SET_TTL | MLX5_FLOW_ACTION_DEC_TTL)) {
+		if (!(item_flags &
+		     (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
+		      MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
+			return rte_flow_error_set(error, EINVAL,
+						  RTE_FLOW_ERROR_TYPE_ACTION,
+						  actions,
+						  "no IP found in pattern");
+	}
 	return 0;
 }
 
@@ -1318,6 +1394,8 @@ flow_tcf_get_actions_and_size(const struct rte_flow_action actions[],
 		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
 		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
 		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
+		case RTE_FLOW_ACTION_TYPE_SET_TTL:
+		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
 			size += flow_tcf_get_pedit_actions_size(&actions,
 								&flags);
 			break;
@@ -1862,6 +1940,8 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
 		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
 		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
 		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
+		case RTE_FLOW_ACTION_TYPE_SET_TTL:
+		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
 			na_act_index =
 				mnl_attr_nest_start(nlh, na_act_index_cur++);
 			flow_tcf_create_pedit_mnl_msg(nlh,
-- 
2.17.1

  parent reply	other threads:[~2018-10-10 13:06 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-25 13:47 [dpdk-dev] [PATCH 0/3] ethdev: add generic TTL rewrite actions Xiaoyu Min
2018-09-25 13:47 ` [dpdk-dev] [PATCH 1/3] " Xiaoyu Min
2018-09-25 13:47 ` [dpdk-dev] [PATCH 2/3] app/testpmd: add commands of modify TTL Xiaoyu Min
2018-09-25 13:47 ` [dpdk-dev] [PATCH 3/3] net/mlx5: eswitch-modify TTL actions Xiaoyu Min
2018-10-03 20:07   ` Yongseok Koh
2018-10-08  6:57     ` Xiaoyu Min
2018-09-25 14:37 ` [dpdk-dev] [PATCH v2 0/3] ethdev: add generic TTL rewrite actions Xiaoyu Min
2018-09-25 14:37   ` [dpdk-dev] [PATCH v2 1/3] " Xiaoyu Min
2018-10-03 19:50     ` Yongseok Koh
2018-09-25 14:37   ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: add commands of modify TTL Xiaoyu Min
2018-10-03 19:51     ` Yongseok Koh
2018-09-25 14:37   ` [dpdk-dev] [PATCH v2 3/3] net/mlx5: eswitch-modify TTL actions Xiaoyu Min
2018-10-05 12:48     ` Ferruh Yigit
2018-10-05 18:17       ` Yongseok Koh
2018-10-03 20:35   ` [dpdk-dev] [PATCH v2 0/3] ethdev: add generic TTL rewrite actions Thomas Monjalon
2018-10-05 12:52   ` Ferruh Yigit
2018-10-08  2:30     ` Xiaoyu Min
2018-10-10 13:05   ` [dpdk-dev] [PATCH v3 " Jack Min
2018-10-10 13:05     ` [dpdk-dev] [PATCH v3 1/3] " Jack Min
2018-10-10 13:05     ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: add commands of modify TTL Jack Min
2018-10-10 13:06     ` Jack Min [this message]
2018-10-11  5:47       ` [dpdk-dev] [PATCH v3 3/3] net/mlx5: rewrite TTL by E-Switch Yongseok Koh
2018-10-11 13:27     ` [dpdk-dev] [PATCH v4 0/3] ethdev: add generic TTL rewrite actions Jack Min
2018-10-11 13:27       ` [dpdk-dev] [PATCH v4 1/3] " Jack Min
2018-10-12 14:12         ` Ferruh Yigit
2018-10-13  2:16           ` Jack Min
2018-10-11 13:27       ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: add commands of modify TTL Jack Min
2018-10-11 13:27       ` [dpdk-dev] [PATCH v4 3/3] net/mlx5: rewrite TTL by E-Switch Jack Min
2018-10-13  3:24       ` [dpdk-dev] [PATCH v5 0/3] ethdev: add generic TTL rewrite actions Jack Min
2018-10-13  3:24         ` [dpdk-dev] [PATCH v5 1/3] " Jack Min
2018-10-14  7:35           ` Andrew Rybchenko
2018-10-16  2:03             ` Jack Min
2018-10-13  3:24         ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: add commands of modify TTL Jack Min
2018-10-13  3:24         ` [dpdk-dev] [PATCH v5 3/3] net/mlx5: rewrite TTL by E-Switch Jack Min
2018-10-16  8:14         ` [dpdk-dev] [PATCH v6 0/3] ethdev: add generic TTL rewrite actions Jack Min
2018-10-16  8:14           ` [dpdk-dev] [PATCH v6 1/3] " Jack Min
2018-10-16  8:25             ` Andrew Rybchenko
2018-10-16  8:48               ` Ferruh Yigit
2018-10-16  8:14           ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: add commands of modify TTL Jack Min
2018-10-16  8:14           ` [dpdk-dev] [PATCH v6 3/3] net/mlx5: rewrite TTL by E-Switch Jack Min

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181010130524.23590-4-jackmin@mellanox.com \
    --to=jackmin@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=shahafs@mellanox.com \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).