From: Jack Min <jackmin@mellanox.com>
To: Adrien Mazarguil <adrien.mazarguil@6wind.com>,
John McNamara <john.mcnamara@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Thomas Monjalon <thomas@monjalon.net>,
Ferruh Yigit <ferruh.yigit@intel.com>,
Andrew Rybchenko <arybchenko@solarflare.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 1/3] ethdev: add generic MAC address rewrite actions
Date: Wed, 10 Oct 2018 13:11:38 +0000 [thread overview]
Message-ID: <20181010131108.24167-2-jackmin@mellanox.com> (raw)
In-Reply-To: <20181010131108.24167-1-jackmin@mellanox.com>
rte_flow actions:
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
added in order to offload to NIC
The rte_flow_itme_eth must be present in rte_flow pattern
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
doc/guides/prog_guide/rte_flow.rst | 30 ++++++++++++++++++++++++++++++
lib/librte_ethdev/rte_flow.c | 2 ++
lib/librte_ethdev/rte_flow.h | 29 +++++++++++++++++++++++++++++
3 files changed, 61 insertions(+)
diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index e8df1e488..d0f2d8b54 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -2196,6 +2196,36 @@ Assigns a new TTL value.
| ``ttl_value`` | new TTL value |
+---------------+--------------------+
+Action: ``SET_MAC_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set source MAC address
+
+.. _table_rte_flow_action_set_mac_src:
+
+.. table:: SET_MAC_SRC
+
+ +--------------+---------------+
+ | Field | Value |
+ +==============+===============+
+ | ``mac_addr`` | MAC address |
+ +--------------+---------------+
+
+Action: ``SET_MAC_DST``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Set source MAC address
+
+.. _table_rte_flow_action_set_mac_dst:
+
+.. table:: SET_MAC_DST
+
+ +--------------+---------------+
+ | Field | Value |
+ +==============+===============+
+ | ``mac_addr`` | MAC address |
+ +--------------+---------------+
+
Negative types
~~~~~~~~~~~~~~
diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index 458a05994..810069935 100644
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -137,6 +137,8 @@ static const struct rte_flow_desc_data rte_flow_desc_action[] = {
sizeof(struct rte_flow_action_set_tp)),
MK_FLOW_ACTION(DEC_TTL, 0),
MK_FLOW_ACTION(SET_TTL, sizeof(struct rte_flow_action_set_ttl)),
+ MK_FLOW_ACTION(SET_MAC_SRC, sizeof(struct rte_flow_action_set_mac)),
+ MK_FLOW_ACTION(SET_MAC_DST, sizeof(struct rte_flow_action_set_mac)),
};
static int
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index bb07eba9d..4193f4e05 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -1568,6 +1568,26 @@ enum rte_flow_action_type {
* See struct rte_flow_action_set_ttl
*/
RTE_FLOW_ACTION_TYPE_SET_TTL,
+
+ /**
+ * Set source MAC address from matched flow.
+ *
+ * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH,
+ * the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
+ *
+ * See struct rte_flow_action_set_mac.
+ */
+ RTE_FLOW_ACTION_TYPE_SET_MAC_SRC,
+
+ /**
+ * Set destination MAC address from matched flow.
+ *
+ * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_ETH,
+ * the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION error.
+ *
+ * See struct rte_flow_action_set_mac.
+ */
+ RTE_FLOW_ACTION_TYPE_SET_MAC_DST,
};
/**
@@ -1987,6 +2007,15 @@ struct rte_flow_action_set_ttl {
uint8_t ttl_value;
};
+/**
+ * RTE_FLOW_ACTION_TYPE_SET_MAC
+ *
+ * Set MAC address from the matched flow
+ */
+struct rte_flow_action_set_mac {
+ uint8_t mac_addr[ETHER_ADDR_LEN];
+};
+
/*
* Definition of a single action.
*
--
2.17.1
next prev parent reply other threads:[~2018-10-10 13:11 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-25 15:03 [dpdk-dev] [PATCH 0/3] " Xiaoyu Min
2018-09-25 15:03 ` [dpdk-dev] [PATCH 1/3] " Xiaoyu Min
2018-10-03 20:08 ` Yongseok Koh
2018-10-08 9:31 ` Andrew Rybchenko
2018-09-25 15:03 ` [dpdk-dev] [PATCH 2/3] app/testpmd: add commands of modify MAC address Xiaoyu Min
2018-10-03 20:09 ` Yongseok Koh
2018-09-25 15:03 ` [dpdk-dev] [PATCH 3/3] net/mlx5: eswitch-modify MAC address actions Xiaoyu Min
2018-10-03 20:10 ` Yongseok Koh
2018-10-05 12:54 ` [dpdk-dev] [PATCH 0/3] ethdev: add generic MAC address rewrite actions Ferruh Yigit
2018-10-08 2:32 ` Xiaoyu Min
2018-10-10 13:11 ` [dpdk-dev] [PATCH v2 " Jack Min
2018-10-10 13:11 ` Jack Min [this message]
2018-10-10 13:11 ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: add commands of modify MAC address Jack Min
2018-10-10 13:11 ` [dpdk-dev] [PATCH v2 3/3] net/mlx5: rewrite MAC address by E-Switch Jack Min
2018-10-11 5:51 ` Yongseok Koh
2018-10-11 13:31 ` [dpdk-dev] [PATCH v3 0/3] ethdev: add generic MAC address rewrite actions Jack Min
2018-10-11 13:31 ` [dpdk-dev] [PATCH v3 1/3] " Jack Min
2018-10-11 13:31 ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: add commands of modify MAC address Jack Min
2018-10-11 13:31 ` [dpdk-dev] [PATCH v3 3/3] net/mlx5: rewrite MAC address by E-Switch Jack Min
2018-10-16 9:11 ` [dpdk-dev] [PATCH v3 0/3] ethdev: add generic MAC address rewrite actions Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181010131108.24167-2-jackmin@mellanox.com \
--to=jackmin@mellanox.com \
--cc=adrien.mazarguil@6wind.com \
--cc=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=john.mcnamara@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).