From: John Daley <johndale@cisco.com>
To: ferruh.yigit@intel.com
Cc: dev@dpdk.org, John Daley <johndale@cisco.com>
Subject: [dpdk-dev] [PATCH v2] net/enic: fix counter action
Date: Wed, 10 Oct 2018 15:11:31 -0700 [thread overview]
Message-ID: <20181010221131.12371-1-johndale@cisco.com> (raw)
In-Reply-To: <20181010025258.9822-1-johndale@cisco.com>
- track whether counter DMAs are active or not so they can be stopped if
needed before DMA memory is freed
- fix counter DMA shut-down by changing vnic_dev_counter_dma_cfg() to
take the number of counters to DMA instead of high counter index and
use num counters = 0 to shut off DMAs
- remove unnecessary checks that DMA counter memory is valid and that
counter DMAs are in use
- change the minimum DMA period to match what 1400 series adapter is
capable of
- fix comments and change a couple variable names to make more sense
Fixes: fc6dec87f4cb ("net/enic: support flow counter action")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
---
v2 - fix typo
drivers/net/enic/base/vnic_dev.c | 40 ++++++++++++++++++++++++-------------
drivers/net/enic/base/vnic_dev.h | 2 +-
drivers/net/enic/base/vnic_devcmd.h | 1 +
drivers/net/enic/enic.h | 4 +++-
drivers/net/enic/enic_flow.c | 4 ++--
drivers/net/enic/enic_main.c | 2 +-
6 files changed, 34 insertions(+), 19 deletions(-)
diff --git a/drivers/net/enic/base/vnic_dev.c b/drivers/net/enic/base/vnic_dev.c
index 1a3656f87..fd303fece 100644
--- a/drivers/net/enic/base/vnic_dev.c
+++ b/drivers/net/enic/base/vnic_dev.c
@@ -59,6 +59,7 @@ struct vnic_dev {
dma_addr_t dma_handle);
struct vnic_counter_counts *flow_counters;
dma_addr_t flow_counters_pa;
+ u8 flow_counters_dma_active;
};
#define VNIC_MAX_RES_HDR_SIZE \
@@ -618,18 +619,30 @@ int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats)
/*
* Configure counter DMA
*/
-int vnic_dev_counter_dma_cfg(struct vnic_dev *vdev, u32 period, u32 counter_idx)
+int vnic_dev_counter_dma_cfg(struct vnic_dev *vdev, u32 period,
+ u32 num_counters)
{
u64 args[3];
int wait = 1000;
+ int err;
- if (!vdev->flow_counters || counter_idx >= VNIC_MAX_FLOW_COUNTERS)
+ if (num_counters > VNIC_MAX_FLOW_COUNTERS)
return -ENOMEM;
+ if (period > 0 && (period < VNIC_COUNTER_DMA_MIN_PERIOD ||
+ num_counters == 0))
+ return -EINVAL;
- args[0] = counter_idx + 1;
+ args[0] = num_counters;
args[1] = vdev->flow_counters_pa;
args[2] = period;
- return vnic_dev_cmd_args(vdev, CMD_COUNTER_DMA_CONFIG, args, 3, wait);
+ err = vnic_dev_cmd_args(vdev, CMD_COUNTER_DMA_CONFIG, args, 3, wait);
+
+ /* record if DMAs need to be stopped on close */
+ if (!err)
+ vdev->flow_counters_dma_active = (num_counters != 0 &&
+ period != 0);
+
+ return err;
}
int vnic_dev_close(struct vnic_dev *vdev)
@@ -974,6 +987,7 @@ int vnic_dev_alloc_counter_mem(struct vnic_dev *vdev)
* VNIC_MAX_FLOW_COUNTERS,
&vdev->flow_counters_pa,
(u8 *)name);
+ vdev->flow_counters_dma_active = 0;
return vdev->flow_counters == NULL ? -ENOMEM : 0;
}
@@ -991,7 +1005,8 @@ void vnic_dev_unregister(struct vnic_dev *vdev)
vdev->stats, vdev->stats_pa);
if (vdev->flow_counters) {
/* turn off counter DMAs before freeing memory */
- vnic_dev_counter_dma_cfg(vdev, 0, 0);
+ if (vdev->flow_counters_dma_active)
+ vnic_dev_counter_dma_cfg(vdev, 0, 0);
vdev->free_consistent(vdev->priv,
sizeof(struct vnic_counter_counts)
@@ -1171,19 +1186,16 @@ bool vnic_dev_counter_query(struct vnic_dev *vdev, uint32_t idx,
u64 a1 = reset ? 1 : 0;
int wait = 1000;
- if (vdev->flow_counters) {
- /* Using counter DMA API, so counters avail in host memory */
- *packets = vdev->flow_counters[idx].vcc_packets;
- *bytes = vdev->flow_counters[idx].vcc_bytes;
- if (reset)
- if (vnic_dev_cmd(vdev, CMD_COUNTER_QUERY, &a0, &a1,
- wait))
- return false;
- } else {
+ if (reset) {
+ /* query/reset returns updated counters */
if (vnic_dev_cmd(vdev, CMD_COUNTER_QUERY, &a0, &a1, wait))
return false;
*packets = a0;
*bytes = a1;
+ } else {
+ /* Get values DMA'd from the adapter */
+ *packets = vdev->flow_counters[idx].vcc_packets;
+ *bytes = vdev->flow_counters[idx].vcc_bytes;
}
return true;
}
diff --git a/drivers/net/enic/base/vnic_dev.h b/drivers/net/enic/base/vnic_dev.h
index 63751d8c5..de2645c43 100644
--- a/drivers/net/enic/base/vnic_dev.h
+++ b/drivers/net/enic/base/vnic_dev.h
@@ -119,7 +119,7 @@ int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, size_t size,
int vnic_dev_stats_clear(struct vnic_dev *vdev);
int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats);
int vnic_dev_counter_dma_cfg(struct vnic_dev *vdev, u32 period,
- u32 counter_idx);
+ u32 num_counters);
int vnic_dev_hang_notify(struct vnic_dev *vdev);
int vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
int broadcast, int promisc, int allmulti);
diff --git a/drivers/net/enic/base/vnic_devcmd.h b/drivers/net/enic/base/vnic_devcmd.h
index 0efcee2ff..3aad2dbd5 100644
--- a/drivers/net/enic/base/vnic_devcmd.h
+++ b/drivers/net/enic/base/vnic_devcmd.h
@@ -634,6 +634,7 @@ enum vnic_devcmd_cmd {
* (u32) a2 = DMA period in milliseconds (0 to disable)
*/
CMD_COUNTER_DMA_CONFIG = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 88),
+#define VNIC_COUNTER_DMA_MIN_PERIOD 500
/*
* Clear all counters on a vnic
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index e5f4d3b26..7bca3cad2 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -38,7 +38,9 @@
#define ENIC_PAGE_SIZE 4096
#define PAGE_ROUND_UP(x) \
((((unsigned long)(x)) + ENIC_PAGE_SIZE-1) & (~(ENIC_PAGE_SIZE-1)))
-#define VNIC_FLOW_COUNTER_UPDATE_MSECS 100
+
+/* must be >= VNIC_COUNTER_DMA_MIN_PERIOD */
+#define VNIC_FLOW_COUNTER_UPDATE_MSECS 500
#define ENICPMD_VFIO_PATH "/dev/vfio/vfio"
/*#define ENIC_DESC_COUNT_MAKE_ODD (x) do{if ((~(x)) & 1) { (x)--; } }while(0)*/
diff --git a/drivers/net/enic/enic_flow.c b/drivers/net/enic/enic_flow.c
index 04fc351b3..bb9ed037a 100644
--- a/drivers/net/enic/enic_flow.c
+++ b/drivers/net/enic/enic_flow.c
@@ -1444,7 +1444,7 @@ enic_flow_add_filter(struct enic *enic, struct filter_v2 *enic_filter,
if (ctr_idx > enic->max_flow_counter) {
err = vnic_dev_counter_dma_cfg(enic->vdev,
VNIC_FLOW_COUNTER_UPDATE_MSECS,
- ctr_idx);
+ ctr_idx + 1);
if (err) {
rte_flow_error_set(error, -err,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
@@ -1477,7 +1477,7 @@ enic_flow_add_filter(struct enic *enic, struct filter_v2 *enic_filter,
/* reduce counter DMA size */
vnic_dev_counter_dma_cfg(enic->vdev,
VNIC_FLOW_COUNTER_UPDATE_MSECS,
- last_max_flow_ctr);
+ last_max_flow_ctr + 1);
enic->max_flow_counter = last_max_flow_ctr;
}
unwind_ctr_alloc:
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 3eced2ce2..b2581322d 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1766,7 +1766,7 @@ int enic_probe(struct enic *enic)
/*
* Allocate the consistent memory for stats and counters upfront so
- * both primary and secondary processes can dump stats.
+ * both primary and secondary processes can access them.
*/
err = vnic_dev_alloc_stats_mem(enic->vdev);
if (err) {
--
2.16.2
next prev parent reply other threads:[~2018-10-10 22:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-10 2:52 [dpdk-dev] [PATCH] " John Daley
2018-10-10 22:11 ` John Daley [this message]
2018-10-12 9:33 ` [dpdk-dev] [PATCH v2] " Ferruh Yigit
2018-10-12 10:14 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181010221131.12371-1-johndale@cisco.com \
--to=johndale@cisco.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).