From: Maxime Coquelin <maxime.coquelin@redhat.com>
To: dev@dpdk.org, tiwei.bie@intel.com, zhihong.wang@intel.com,
jfreimann@redhat.com, nicknickolaev@gmail.com,
i.maximets@samsung.com, bruce.richardson@intel.com,
alejandro.lucero@netronome.com
Cc: dgilbert@redhat.com, stable@dpdk.org,
Maxime Coquelin <maxime.coquelin@redhat.com>
Subject: [dpdk-dev] [PATCH v6 01/19] vhost: fix messages results handling
Date: Thu, 11 Oct 2018 11:24:14 +0200 [thread overview]
Message-ID: <20181011092432.22275-2-maxime.coquelin@redhat.com> (raw)
In-Reply-To: <20181011092432.22275-1-maxime.coquelin@redhat.com>
Return of message handling has now changed to an enum that can
take non-negative value that is not zero in case a reply is
needed. But the code checking the variable afterwards has not
been updated, leading to success messages handling being
treated as errors.
External post and pre callbacks return type needs also to be
changed to the new enum, so that its handling is consistent.
This is done in this patch alongside with the convertion of
its only user, vhost-crypto backend.
Fixes: 0bff510b5ea6 ("vhost: unify message handling function signature")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
lib/librte_vhost/vhost.h | 19 +++++++-----------
lib/librte_vhost/vhost_crypto.c | 24 +++++++++++------------
lib/librte_vhost/vhost_user.c | 34 +++++++++------------------------
lib/librte_vhost/vhost_user.h | 9 +++++++++
4 files changed, 36 insertions(+), 50 deletions(-)
diff --git a/lib/librte_vhost/vhost.h b/lib/librte_vhost/vhost.h
index 25ffd7614..341b0a147 100644
--- a/lib/librte_vhost/vhost.h
+++ b/lib/librte_vhost/vhost.h
@@ -292,17 +292,15 @@ struct guest_page {
* vhost device id
* @param msg
* Message pointer.
- * @param require_reply
- * If the handler requires sending a reply, this varaible shall be written 1,
- * otherwise 0.
* @param skip_master
* If the handler requires skipping the master message handling, this variable
* shall be written 1, otherwise 0.
* @return
- * 0 on success, -1 on failure
+ * VH_RESULT_OK on success, VH_RESULT_REPLY on success with reply,
+ * VH_RESULT_ERR on failure
*/
-typedef int (*vhost_msg_pre_handle)(int vid, void *msg,
- uint32_t *require_reply, uint32_t *skip_master);
+typedef enum vh_result (*vhost_msg_pre_handle)(int vid, void *msg,
+ uint32_t *skip_master);
/**
* function prototype for the vhost backend to handler specific vhost user
@@ -312,14 +310,11 @@ typedef int (*vhost_msg_pre_handle)(int vid, void *msg,
* vhost device id
* @param msg
* Message pointer.
- * @param require_reply
- * If the handler requires sending a reply, this varaible shall be written 1,
- * otherwise 0.
* @return
- * 0 on success, -1 on failure
+ * VH_RESULT_OK on success, VH_RESULT_REPLY on success with reply,
+ * VH_RESULT_ERR on failure
*/
-typedef int (*vhost_msg_post_handle)(int vid, void *msg,
- uint32_t *require_reply);
+typedef enum vh_result (*vhost_msg_post_handle)(int vid, void *msg);
/**
* pre and post vhost user message handlers
diff --git a/lib/librte_vhost/vhost_crypto.c b/lib/librte_vhost/vhost_crypto.c
index 57341ef8f..e534e1187 100644
--- a/lib/librte_vhost/vhost_crypto.c
+++ b/lib/librte_vhost/vhost_crypto.c
@@ -425,35 +425,33 @@ vhost_crypto_close_sess(struct vhost_crypto *vcrypto, uint64_t session_id)
return 0;
}
-static int
-vhost_crypto_msg_post_handler(int vid, void *msg, uint32_t *require_reply)
+static enum vh_result
+vhost_crypto_msg_post_handler(int vid, void *msg)
{
struct virtio_net *dev = get_device(vid);
struct vhost_crypto *vcrypto;
VhostUserMsg *vmsg = msg;
- int ret = 0;
+ enum vh_result ret = VH_RESULT_ERR;
- if (dev == NULL || require_reply == NULL) {
+ if (dev == NULL) {
VC_LOG_ERR("Invalid vid %i", vid);
- return -EINVAL;
+ return VH_RESULT_ERR;
}
vcrypto = dev->extern_data;
if (vcrypto == NULL) {
VC_LOG_ERR("Cannot find required data, is it initialized?");
- return -ENOENT;
+ return VH_RESULT_ERR;
}
- *require_reply = 0;
-
if (vmsg->request.master == VHOST_USER_CRYPTO_CREATE_SESS) {
vhost_crypto_create_sess(vcrypto,
&vmsg->payload.crypto_session);
- *require_reply = 1;
- } else if (vmsg->request.master == VHOST_USER_CRYPTO_CLOSE_SESS)
- ret = vhost_crypto_close_sess(vcrypto, vmsg->payload.u64);
- else
- ret = -EINVAL;
+ ret = VH_RESULT_REPLY;
+ } else if (vmsg->request.master == VHOST_USER_CRYPTO_CLOSE_SESS) {
+ if (!vhost_crypto_close_sess(vcrypto, vmsg->payload.u64))
+ ret = VH_RESULT_OK;
+ }
return ret;
}
diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
index 7ef3fb4a4..e8375ca34 100644
--- a/lib/librte_vhost/vhost_user.c
+++ b/lib/librte_vhost/vhost_user.c
@@ -71,16 +71,6 @@ static const char *vhost_message_str[VHOST_USER_MAX] = {
[VHOST_USER_CRYPTO_CLOSE_SESS] = "VHOST_USER_CRYPTO_CLOSE_SESS",
};
-/* The possible results of a message handling function */
-enum vh_result {
- /* Message handling failed */
- VH_RESULT_ERR = -1,
- /* Message handling successful */
- VH_RESULT_OK = 0,
- /* Message handling successful and reply prepared */
- VH_RESULT_REPLY = 1,
-};
-
static uint64_t
get_blk_size(int fd)
{
@@ -1738,14 +1728,11 @@ vhost_user_msg_handler(int vid, int fd)
}
if (dev->extern_ops.pre_msg_handle) {
- uint32_t need_reply;
-
ret = (*dev->extern_ops.pre_msg_handle)(dev->vid,
- (void *)&msg, &need_reply, &skip_master);
- if (ret < 0)
+ (void *)&msg, &skip_master);
+ if (ret == VH_RESULT_ERR)
goto skip_to_reply;
-
- if (need_reply)
+ else if (ret == VH_RESULT_REPLY)
send_vhost_reply(fd, &msg);
if (skip_master)
@@ -1783,15 +1770,12 @@ vhost_user_msg_handler(int vid, int fd)
}
skip_to_post_handle:
- if (!ret && dev->extern_ops.post_msg_handle) {
- uint32_t need_reply;
-
+ if (ret != VH_RESULT_ERR && dev->extern_ops.post_msg_handle) {
ret = (*dev->extern_ops.post_msg_handle)(
- dev->vid, (void *)&msg, &need_reply);
- if (ret < 0)
+ dev->vid, (void *)&msg);
+ if (ret == VH_RESULT_ERR)
goto skip_to_reply;
-
- if (need_reply)
+ else if (ret == VH_RESULT_REPLY)
send_vhost_reply(fd, &msg);
}
@@ -1800,10 +1784,10 @@ vhost_user_msg_handler(int vid, int fd)
vhost_user_unlock_all_queue_pairs(dev);
if (msg.flags & VHOST_USER_NEED_REPLY) {
- msg.payload.u64 = !!ret;
+ msg.payload.u64 = ret == VH_RESULT_ERR;
msg.size = sizeof(msg.payload.u64);
send_vhost_reply(fd, &msg);
- } else if (ret) {
+ } else if (ret == VH_RESULT_ERR) {
RTE_LOG(ERR, VHOST_CONFIG,
"vhost message handling failed.\n");
return -1;
diff --git a/lib/librte_vhost/vhost_user.h b/lib/librte_vhost/vhost_user.h
index 42166adf2..62654f736 100644
--- a/lib/librte_vhost/vhost_user.h
+++ b/lib/librte_vhost/vhost_user.h
@@ -139,6 +139,15 @@ typedef struct VhostUserMsg {
/* The version of the protocol we support */
#define VHOST_USER_VERSION 0x1
+/* The possible results of a message handling function */
+enum vh_result {
+ /* Message handling failed */
+ VH_RESULT_ERR = -1,
+ /* Message handling successful */
+ VH_RESULT_OK = 0,
+ /* Message handling successful and reply prepared */
+ VH_RESULT_REPLY = 1,
+};
/* vhost_user.c */
int vhost_user_msg_handler(int vid, int fd);
--
2.17.1
next prev parent reply other threads:[~2018-10-11 9:24 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-11 9:24 [dpdk-dev] [PATCH v6 00/19] vhost: add postcopy live-migration support Maxime Coquelin
2018-10-11 9:24 ` Maxime Coquelin [this message]
2018-10-11 16:18 ` [dpdk-dev] [PATCH v6 01/19] vhost: fix messages results handling Ilya Maximets
2018-10-12 9:03 ` Maxime Coquelin
2018-10-12 9:55 ` Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 02/19] vhost: fix return code of messages requiring replies Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 03/19] vhost: clarify reply-ack in case a reply was already sent Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 04/19] vhost: fix payload size of reply Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 05/19] vhost: fix error handling when mem table gets updated Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 06/19] vhost: define postcopy protocol flag Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 07/19] vhost: add number of fds to vhost-user messages and use it Maxime Coquelin
2018-10-11 15:59 ` Ilya Maximets
2018-10-12 8:43 ` Maxime Coquelin
2018-10-12 8:45 ` Maxime Coquelin
2018-10-12 8:57 ` Maxime Coquelin
2018-10-12 9:53 ` Ilya Maximets
2018-10-12 9:52 ` Maxime Coquelin
2018-10-12 10:04 ` Ilya Maximets
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 08/19] vhost: pass socket fd to message handling callbacks Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 09/19] vhost: enable fds passing when sending vhost-user messages Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 10/19] vhost: add config flag for postcopy feature Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 11/19] vhost: introduce postcopy's advise message Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 12/19] vhost: add support for postcopy's listen message Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 13/19] vhost: register new regions with userfaultfd Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 14/19] vhost: avoid useless VhostUserMemory copy Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 15/19] vhost: send userfault range addresses back to qemu Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 16/19] vhost: add support to postcopy's end request Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 17/19] vhost: restrict postcopy live-migration enablement Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 18/19] net/vhost: add parameter to enable postcopy support Maxime Coquelin
2018-10-11 9:24 ` [dpdk-dev] [PATCH v6 19/19] vhost: enable postcopy protocol feature Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181011092432.22275-2-maxime.coquelin@redhat.com \
--to=maxime.coquelin@redhat.com \
--cc=alejandro.lucero@netronome.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=dgilbert@redhat.com \
--cc=i.maximets@samsung.com \
--cc=jfreimann@redhat.com \
--cc=nicknickolaev@gmail.com \
--cc=stable@dpdk.org \
--cc=tiwei.bie@intel.com \
--cc=zhihong.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).