DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jack Min <jackmin@mellanox.com>
To: Shahaf Shuler <shahafs@mellanox.com>, Yongseok Koh <yskoh@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v3 3/3] net/mlx5: rewrite MAC address by E-Switch
Date: Thu, 11 Oct 2018 13:31:46 +0000	[thread overview]
Message-ID: <20181011133109.1520-4-jackmin@mellanox.com> (raw)
In-Reply-To: <20181011133109.1520-1-jackmin@mellanox.com>

Offload following modify MAC address actions to E-Switch
via TC-Flower driver

- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST

The corresponding rte_flow_item_eth must be present in
rte_flow pattern

Only support modify outer layer MAC address

The example testpmd command is:

    flow create 0 transfer ingress
         pattern eth / ipv4 / udp dst is 7000 / end
         actions set_mac_dst mac_addr dd:00:aa:11:bb:33 /
         set_mac_src mac_addr bb:00:cc:11:aa:22 /
	 port_id id 1 / end

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow.h     |  2 +
 drivers/net/mlx5/mlx5_flow_tcf.c | 70 +++++++++++++++++++++++++++++++-
 2 files changed, 71 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
index cb07cf652..8ac24ebd5 100644
--- a/drivers/net/mlx5/mlx5_flow.h
+++ b/drivers/net/mlx5/mlx5_flow.h
@@ -86,6 +86,8 @@
 #define MLX5_FLOW_ACTION_SET_TP_DST (1u << 16)
 #define MLX5_FLOW_ACTION_SET_TTL (1u << 17)
 #define MLX5_FLOW_ACTION_DEC_TTL (1u << 18)
+#define MLX5_FLOW_ACTION_SET_MAC_SRC (1u << 19)
+#define MLX5_FLOW_ACTION_SET_MAC_DST (1u << 20)
 
 #define MLX5_FLOW_FATE_ACTIONS \
 	(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | MLX5_FLOW_ACTION_RSS)
diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
index a0a3680d5..885e50235 100644
--- a/drivers/net/mlx5/mlx5_flow_tcf.c
+++ b/drivers/net/mlx5/mlx5_flow_tcf.c
@@ -303,7 +303,8 @@ struct flow_tcf_ptoi {
 	(MLX5_FLOW_ACTION_SET_IPV4_SRC | MLX5_FLOW_ACTION_SET_IPV4_DST | \
 	 MLX5_FLOW_ACTION_SET_IPV6_SRC | MLX5_FLOW_ACTION_SET_IPV6_DST | \
 	 MLX5_FLOW_ACTION_SET_TP_SRC | MLX5_FLOW_ACTION_SET_TP_DST | \
-	 MLX5_FLOW_ACTION_SET_TTL | MLX5_FLOW_ACTION_DEC_TTL)
+	 MLX5_FLOW_ACTION_SET_TTL | MLX5_FLOW_ACTION_DEC_TTL | \
+	 MLX5_FLOW_ACTION_SET_MAC_SRC | MLX5_FLOW_ACTION_SET_MAC_DST)
 
 #define MLX5_TCF_CONFIG_ACTIONS \
 	(MLX5_FLOW_ACTION_PORT_ID | MLX5_FLOW_ACTION_OF_PUSH_VLAN | \
@@ -328,6 +329,42 @@ struct pedit_parser {
 };
 
 
+/**
+ * Set pedit key of MAC address
+ *
+ * @param[in] actions
+ *   pointer to action specification
+ * @param[in,out] p_parser
+ *   pointer to pedit_parser
+ */
+static void
+flow_tcf_pedit_key_set_mac(const struct rte_flow_action *actions,
+			   struct pedit_parser *p_parser)
+{
+	int idx = p_parser->sel.nkeys;
+	uint32_t off = actions->type == RTE_FLOW_ACTION_TYPE_SET_MAC_SRC ?
+					offsetof(struct ether_hdr, s_addr) :
+					offsetof(struct ether_hdr, d_addr);
+	const struct rte_flow_action_set_mac *conf =
+		(const struct rte_flow_action_set_mac *)actions->conf;
+
+	p_parser->keys[idx].off = off;
+	p_parser->keys[idx].mask = ~UINT32_MAX;
+	p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_ETH;
+	p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
+	memcpy(&p_parser->keys[idx].val,
+		conf->mac_addr, SZ_PEDIT_KEY_VAL);
+	idx++;
+	p_parser->keys[idx].off = off + SZ_PEDIT_KEY_VAL;
+	p_parser->keys[idx].mask = 0xFFFF0000;
+	p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_ETH;
+	p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
+	memcpy(&p_parser->keys[idx].val,
+		conf->mac_addr + SZ_PEDIT_KEY_VAL,
+		ETHER_ADDR_LEN - SZ_PEDIT_KEY_VAL);
+	p_parser->sel.nkeys = (++idx);
+}
+
 /**
  * Set pedit key of decrease/set ttl
  *
@@ -508,6 +545,10 @@ flow_tcf_create_pedit_mnl_msg(struct nlmsghdr *nl,
 			flow_tcf_pedit_key_set_dec_ttl(*actions,
 							&p_parser, item_flags);
 			break;
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
+			flow_tcf_pedit_key_set_mac(*actions, &p_parser);
+			break;
 		default:
 			goto pedit_mnl_msg_done;
 		}
@@ -596,6 +637,14 @@ flow_tcf_get_pedit_actions_size(const struct rte_flow_action **actions,
 			keys += NUM_OF_PEDIT_KEYS(TTL_LEN);
 			flags |= MLX5_FLOW_ACTION_DEC_TTL;
 			break;
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+			keys += NUM_OF_PEDIT_KEYS(ETHER_ADDR_LEN);
+			flags |= MLX5_FLOW_ACTION_SET_MAC_SRC;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
+			keys += NUM_OF_PEDIT_KEYS(ETHER_ADDR_LEN);
+			flags |= MLX5_FLOW_ACTION_SET_MAC_DST;
+			break;
 		default:
 			goto get_pedit_action_size_done;
 		}
@@ -1122,6 +1171,12 @@ flow_tcf_validate(struct rte_eth_dev *dev,
 		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
 			current_action_flag = MLX5_FLOW_ACTION_DEC_TTL;
 			break;
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+			current_action_flag = MLX5_FLOW_ACTION_SET_MAC_SRC;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
+			current_action_flag = MLX5_FLOW_ACTION_SET_MAC_DST;
+			break;
 		default:
 			return rte_flow_error_set(error, ENOTSUP,
 						  RTE_FLOW_ERROR_TYPE_ACTION,
@@ -1227,6 +1282,15 @@ flow_tcf_validate(struct rte_eth_dev *dev,
 						  actions,
 						  "no IP found in pattern");
 	}
+	if (action_flags &
+	    (MLX5_FLOW_ACTION_SET_MAC_SRC | MLX5_FLOW_ACTION_SET_MAC_DST)) {
+		if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L2))
+			return rte_flow_error_set(error, ENOTSUP,
+						  RTE_FLOW_ERROR_TYPE_ACTION,
+						  actions,
+						  "no ethernet found in"
+						  " pattern");
+	}
 	return 0;
 }
 
@@ -1378,6 +1442,8 @@ flow_tcf_get_actions_and_size(const struct rte_flow_action actions[],
 		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
 		case RTE_FLOW_ACTION_TYPE_SET_TTL:
 		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
 			size += flow_tcf_get_pedit_actions_size(&actions,
 								&flags);
 			break;
@@ -1924,6 +1990,8 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
 		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
 		case RTE_FLOW_ACTION_TYPE_SET_TTL:
 		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
 			na_act_index =
 				mnl_attr_nest_start(nlh, na_act_index_cur++);
 			flow_tcf_create_pedit_mnl_msg(nlh,
-- 
2.17.1

  parent reply	other threads:[~2018-10-11 13:31 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-25 15:03 [dpdk-dev] [PATCH 0/3] ethdev: add generic MAC address rewrite actions Xiaoyu Min
2018-09-25 15:03 ` [dpdk-dev] [PATCH 1/3] " Xiaoyu Min
2018-10-03 20:08   ` Yongseok Koh
2018-10-08  9:31   ` Andrew Rybchenko
2018-09-25 15:03 ` [dpdk-dev] [PATCH 2/3] app/testpmd: add commands of modify MAC address Xiaoyu Min
2018-10-03 20:09   ` Yongseok Koh
2018-09-25 15:03 ` [dpdk-dev] [PATCH 3/3] net/mlx5: eswitch-modify MAC address actions Xiaoyu Min
2018-10-03 20:10   ` Yongseok Koh
2018-10-05 12:54 ` [dpdk-dev] [PATCH 0/3] ethdev: add generic MAC address rewrite actions Ferruh Yigit
2018-10-08  2:32   ` Xiaoyu Min
2018-10-10 13:11 ` [dpdk-dev] [PATCH v2 " Jack Min
2018-10-10 13:11   ` [dpdk-dev] [PATCH v2 1/3] " Jack Min
2018-10-10 13:11   ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: add commands of modify MAC address Jack Min
2018-10-10 13:11   ` [dpdk-dev] [PATCH v2 3/3] net/mlx5: rewrite MAC address by E-Switch Jack Min
2018-10-11  5:51     ` Yongseok Koh
2018-10-11 13:31   ` [dpdk-dev] [PATCH v3 0/3] ethdev: add generic MAC address rewrite actions Jack Min
2018-10-11 13:31     ` [dpdk-dev] [PATCH v3 1/3] " Jack Min
2018-10-11 13:31     ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: add commands of modify MAC address Jack Min
2018-10-11 13:31     ` Jack Min [this message]
2018-10-16  9:11     ` [dpdk-dev] [PATCH v3 0/3] ethdev: add generic MAC address rewrite actions Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181011133109.1520-4-jackmin@mellanox.com \
    --to=jackmin@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=shahafs@mellanox.com \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).