DPDK patches and discussions
 help / color / mirror / Atom feed
From: Qi Zhang <qi.z.zhang@intel.com>
To: bruce.richardson@intel.com, keith.wiles@intel.com,
	konstantin.ananyev@intel.com
Cc: dev@dpdk.org, wenzhuo.lu@intel.com, bernard.iremonger@intel.com,
	Qi Zhang <qi.z.zhang@intel.com>
Subject: [dpdk-dev] [PATCH v2 1/3] app/testpmd: code refactory for macswap
Date: Fri, 23 Nov 2018 01:38:03 +0800	[thread overview]
Message-ID: <20181122173805.79555-2-qi.z.zhang@intel.com> (raw)
In-Reply-To: <20181122173805.79555-1-qi.z.zhang@intel.com>

Move macswap workload to dedicate function, so we can further enable
platform specific optimized version.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
 app/test-pmd/macswap.c        | 32 ++------------------------------
 app/test-pmd/macswap.h        | 40 ++++++++++++++++++++++++++++++++++++++++
 app/test-pmd/macswap_common.h | 36 ++++++++++++++++++++++++++++++++++++
 3 files changed, 78 insertions(+), 30 deletions(-)
 create mode 100644 app/test-pmd/macswap.h
 create mode 100644 app/test-pmd/macswap_common.h

diff --git a/app/test-pmd/macswap.c b/app/test-pmd/macswap.c
index a8384d5b8..849194fe2 100644
--- a/app/test-pmd/macswap.c
+++ b/app/test-pmd/macswap.c
@@ -66,6 +66,7 @@
 #include <rte_flow.h>
 
 #include "testpmd.h"
+#include "macswap.h"
 
 /*
  * MAC swap forwarding mode: Swap the source and the destination Ethernet
@@ -76,15 +77,9 @@ pkt_burst_mac_swap(struct fwd_stream *fs)
 {
 	struct rte_mbuf  *pkts_burst[MAX_PKT_BURST];
 	struct rte_port  *txp;
-	struct rte_mbuf  *mb;
-	struct ether_hdr *eth_hdr;
-	struct ether_addr addr;
 	uint16_t nb_rx;
 	uint16_t nb_tx;
-	uint16_t i;
 	uint32_t retry;
-	uint64_t ol_flags = 0;
-	uint64_t tx_offloads;
 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
 	uint64_t start_tsc;
 	uint64_t end_tsc;
@@ -108,32 +103,9 @@ pkt_burst_mac_swap(struct fwd_stream *fs)
 #endif
 	fs->rx_packets += nb_rx;
 	txp = &ports[fs->tx_port];
-	tx_offloads = txp->dev_conf.txmode.offloads;
-	if (tx_offloads	& DEV_TX_OFFLOAD_VLAN_INSERT)
-		ol_flags = PKT_TX_VLAN_PKT;
-	if (tx_offloads & DEV_TX_OFFLOAD_QINQ_INSERT)
-		ol_flags |= PKT_TX_QINQ_PKT;
-	if (tx_offloads & DEV_TX_OFFLOAD_MACSEC_INSERT)
-		ol_flags |= PKT_TX_MACSEC;
-	for (i = 0; i < nb_rx; i++) {
-		if (likely(i < nb_rx - 1))
-			rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[i + 1],
-						       void *));
-		mb = pkts_burst[i];
-		eth_hdr = rte_pktmbuf_mtod(mb, struct ether_hdr *);
 
-		/* Swap dest and src mac addresses. */
-		ether_addr_copy(&eth_hdr->d_addr, &addr);
-		ether_addr_copy(&eth_hdr->s_addr, &eth_hdr->d_addr);
-		ether_addr_copy(&addr, &eth_hdr->s_addr);
+	do_macswap(pkts_burst, nb_rx, txp);
 
-		mb->ol_flags &= IND_ATTACHED_MBUF | EXT_ATTACHED_MBUF;
-		mb->ol_flags |= ol_flags;
-		mb->l2_len = sizeof(struct ether_hdr);
-		mb->l3_len = sizeof(struct ipv4_hdr);
-		mb->vlan_tci = txp->tx_vlan_id;
-		mb->vlan_tci_outer = txp->tx_vlan_id_outer;
-	}
 	nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue, pkts_burst, nb_rx);
 	/*
 	 * Retry if necessary
diff --git a/app/test-pmd/macswap.h b/app/test-pmd/macswap.h
new file mode 100644
index 000000000..bc8a95626
--- /dev/null
+++ b/app/test-pmd/macswap.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef _L2FWD_H_
+#define _L2FWD_H_
+
+#include "macswap_common.h"
+
+static inline void
+do_macswap(struct rte_mbuf *pkts[], uint16_t nb,
+		struct rte_port *txp)
+{
+	struct ether_hdr *eth_hdr;
+	struct rte_mbuf *mb;
+	struct ether_addr addr;
+	uint64_t ol_flags;
+	int i;
+
+	ol_flags = ol_flags_init(txp->dev_conf.txmode.offloads);
+
+	for (i = 0; i < nb; i++) {
+		if (likely(i < nb - 1))
+			rte_prefetch0(rte_pktmbuf_mtod(pkts[i+1], void *));
+		mb = pkts[i];
+
+		eth_hdr = rte_pktmbuf_mtod(mb, struct ether_hdr *);
+
+		/* Swap dest and src mac addresses. */
+		ether_addr_copy(&eth_hdr->d_addr, &addr);
+		ether_addr_copy(&eth_hdr->s_addr, &eth_hdr->d_addr);
+		ether_addr_copy(&addr, &eth_hdr->s_addr);
+
+		mbuf_field_set(mb, ol_flags, txp->tx_vlan_id,
+				txp->tx_vlan_id_outer);
+	}
+}
+
+#endif /* _BPF_CMD_H_ */
+
diff --git a/app/test-pmd/macswap_common.h b/app/test-pmd/macswap_common.h
new file mode 100644
index 000000000..2c01cbc8f
--- /dev/null
+++ b/app/test-pmd/macswap_common.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef _L2FWD_COMMON_H_
+#define _L2FWD_COMMON_H_
+
+static inline uint64_t
+ol_flags_init(uint64_t tx_offload)
+{
+	uint64_t ol_flags = 0;
+
+	ol_flags |= (tx_offload & DEV_TX_OFFLOAD_VLAN_INSERT) ?
+			PKT_TX_VLAN_PKT : 0;
+	ol_flags |= (tx_offload & DEV_TX_OFFLOAD_QINQ_INSERT) ?
+			PKT_TX_QINQ_PKT : 0;
+	ol_flags |= (tx_offload & DEV_TX_OFFLOAD_MACSEC_INSERT) ?
+			PKT_TX_MACSEC : 0;
+
+	return ol_flags;
+}
+
+static inline void
+mbuf_field_set(struct rte_mbuf *mb, uint64_t ol_flags,
+		uint16_t vlan, uint16_t vlan_outer)
+{
+	mb->ol_flags &= IND_ATTACHED_MBUF | EXT_ATTACHED_MBUF;
+	mb->ol_flags |= ol_flags;
+	mb->l2_len = sizeof(struct ether_hdr);
+	mb->l3_len = sizeof(struct ipv4_hdr);
+	mb->vlan_tci = vlan;
+	mb->vlan_tci_outer = vlan_outer;
+}
+
+#endif /* _BPF_CMD_H_ */
+
-- 
2.13.6

  reply	other threads:[~2018-11-22 17:36 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-22 17:26 [dpdk-dev] [PATCH 0/3] improve MAC swap performance Qi Zhang
2018-11-22 17:26 ` [dpdk-dev] [PATCH 1/3] app/testpmd: code refactory for macswap Qi Zhang
2018-11-22 17:26 ` [dpdk-dev] [PATCH 2/3] app/testpmd: improve MAC swap performance for x86 Qi Zhang
2018-11-22 17:26 ` [dpdk-dev] [PATCH 3/3] app/testpmd: further " Qi Zhang
2018-11-22 17:38 ` [dpdk-dev] [PATCH v2 0/3] improve MAC swap performance Qi Zhang
2018-11-22 17:38   ` Qi Zhang [this message]
2018-12-10 17:44     ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: code refactory for macswap Ferruh Yigit
2018-12-11  4:02       ` Zhang, Qi Z
2018-11-22 17:38   ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: improve MAC swap performance for x86 Qi Zhang
2018-12-10 17:44     ` Ferruh Yigit
2018-11-22 17:38   ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: further " Qi Zhang
2018-12-11  5:55 ` [dpdk-dev] [PATCH v2 0/3] improve MAC swap performance Qi Zhang
2018-12-11  5:55   ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: code refactory for macswap Qi Zhang
2018-12-11 15:48     ` Ferruh Yigit
2018-12-14 11:14     ` Iremonger, Bernard
2018-12-14 11:21       ` Zhang, Qi Z
2018-12-11  5:55   ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: improve MAC swap performance for x86 Qi Zhang
2018-12-13 19:50     ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2018-12-14 11:21     ` [dpdk-dev] " Iremonger, Bernard
2018-12-14 11:36       ` Zhang, Qi Z
2018-12-11  5:55   ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: further " Qi Zhang
2018-12-16  0:58 ` [dpdk-dev] [PATCH v3 0/3] improve MAC swap performance Qi Zhang
2018-12-16  0:58   ` [dpdk-dev] [PATCH v3 1/3] app/testpmd: code refactory for macswap Qi Zhang
2018-12-18 11:06     ` Iremonger, Bernard
2018-12-16  0:58   ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: improve MAC swap performance for x86 Qi Zhang
2018-12-18 11:07     ` Iremonger, Bernard
2018-12-16  0:58   ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: further " Qi Zhang
2018-12-18 11:09     ` Iremonger, Bernard
2018-12-18  0:15   ` [dpdk-dev] [PATCH v3 0/3] improve MAC swap performance Ferruh Yigit
2018-12-18 16:29     ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181122173805.79555-2-qi.z.zhang@intel.com \
    --to=qi.z.zhang@intel.com \
    --cc=bernard.iremonger@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=keith.wiles@intel.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).