[dpdk-dev] [PATCH 15/20] net/dpaa2: add dpdmux initialization and configuration

[Hemant Agrawal <hemant.agrawal@nxp.com>]

From: Nipun Gupta <nipun.gupta@nxp.com>

This patch introduces an rte pmd API to configure dpdmux from
the application.
dpdmux can work in association with dpni as an additional
distribution capability on the NIC.

Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---
 drivers/net/dpaa2/Makefile                  |   1 +
 drivers/net/dpaa2/dpaa2_ethdev.h            |   2 +
 drivers/net/dpaa2/dpaa2_mux.c               | 222 ++++++++++++++++++++
 drivers/net/dpaa2/meson.build               |   1 +
 drivers/net/dpaa2/rte_pmd_dpaa2.h           |  23 ++
 drivers/net/dpaa2/rte_pmd_dpaa2_version.map |   1 +
 6 files changed, 250 insertions(+)
 create mode 100644 drivers/net/dpaa2/dpaa2_mux.c

diff --git a/drivers/net/dpaa2/Makefile b/drivers/net/dpaa2/Makefile
index c58a39725..562551175 100644
--- a/drivers/net/dpaa2/Makefile
+++ b/drivers/net/dpaa2/Makefile
@@ -33,6 +33,7 @@ CFLAGS += -DALLOW_EXPERIMENTAL_API
 SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += base/dpaa2_hw_dpni.c
 SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_rxtx.c
 SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_mux.c
 SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += mc/dpni.c
 SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += mc/dpkg.c
 SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += mc/dpdmux.c
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.h b/drivers/net/dpaa2/dpaa2_ethdev.h
index 7cf6e4191..420ad6446 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.h
+++ b/drivers/net/dpaa2/dpaa2_ethdev.h
@@ -11,6 +11,8 @@
 #include <rte_event_eth_rx_adapter.h>
 #include <rte_pmd_dpaa2.h>
 
+#include <dpaa2_hw_pvt.h>
+
 #include <mc/fsl_dpni.h>
 #include <mc/fsl_mc_sys.h>
 
diff --git a/drivers/net/dpaa2/dpaa2_mux.c b/drivers/net/dpaa2/dpaa2_mux.c
new file mode 100644
index 000000000..1d043dcdc
--- /dev/null
+++ b/drivers/net/dpaa2/dpaa2_mux.c
@@ -0,0 +1,222 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2018 NXP
+ */
+
+#include <sys/queue.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdarg.h>
+
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_eth_ctrl.h>
+#include <rte_malloc.h>
+#include <rte_flow_driver.h>
+#include <rte_tailq.h>
+
+#include <rte_fslmc.h>
+#include <fsl_dpdmux.h>
+#include <fsl_dpkg.h>
+
+#include <dpaa2_ethdev.h>
+#include <dpaa2_pmd_logs.h>
+
+struct dpaa2_dpdmux_dev {
+	TAILQ_ENTRY(dpaa2_dpdmux_dev) next;
+		/**< Pointer to Next device instance */
+	struct fsl_mc_io dpdmux;  /** handle to DPDMUX portal object */
+	uint16_t token;
+	uint32_t dpdmux_id; /*HW ID for DPDMUX object */
+	uint8_t num_ifs;   /* Number of interfaces in DPDMUX */
+};
+
+struct rte_flow {
+	struct dpdmux_rule_cfg rule;
+};
+
+TAILQ_HEAD(dpdmux_dev_list, dpaa2_dpdmux_dev);
+static struct dpdmux_dev_list dpdmux_dev_list =
+	TAILQ_HEAD_INITIALIZER(dpdmux_dev_list); /*!< DPDMUX device list */
+
+static struct dpaa2_dpdmux_dev *get_dpdmux_from_id(uint32_t dpdmux_id)
+{
+	struct dpaa2_dpdmux_dev *dpdmux_dev = NULL;
+
+	/* Get DPBP dev handle from list using index */
+	TAILQ_FOREACH(dpdmux_dev, &dpdmux_dev_list, next) {
+		if (dpdmux_dev->dpdmux_id == dpdmux_id)
+			break;
+	}
+
+	return dpdmux_dev;
+}
+
+struct rte_flow *
+rte_pmd_dpaa2_mux_flow_create(uint32_t dpdmux_id,
+			      struct rte_flow_item *pattern[],
+			      struct rte_flow_action *actions[])
+{
+	struct dpaa2_dpdmux_dev *dpdmux_dev;
+	struct dpkg_profile_cfg kg_cfg;
+	const struct rte_flow_item_ipv4 *spec;
+	const struct rte_flow_action_vf *vf_conf;
+	struct dpdmux_cls_action dpdmux_action;
+	struct rte_flow *flow = NULL;
+	void *key_iova, *mask_iova, *key_cfg_iova = NULL;
+	int ret;
+
+	if (pattern[0]->type != RTE_FLOW_ITEM_TYPE_IPV4) {
+		DPAA2_PMD_ERR("Not supported pattern type: %d",
+			      pattern[0]->type);
+		return NULL;
+	}
+
+	/* Find the DPDMUX from dpdmux_id in our list */
+	dpdmux_dev = get_dpdmux_from_id(dpdmux_id);
+	if (!dpdmux_dev) {
+		DPAA2_PMD_ERR("Invalid dpdmux_id: %d", dpdmux_id);
+		return NULL;
+	}
+
+	key_cfg_iova = rte_zmalloc(NULL, DIST_PARAM_IOVA_SIZE,
+				   RTE_CACHE_LINE_SIZE);
+	if (!key_cfg_iova) {
+		DPAA2_PMD_ERR("Unable to allocate flow-dist parameters");
+		return NULL;
+	}
+
+	/* Currently taking only IP protocol as an extract type.
+	 * This can be exended to other fields using pattern->type.
+	 */
+	memset(&kg_cfg, 0, sizeof(struct dpkg_profile_cfg));
+	kg_cfg.extracts[0].extract.from_hdr.prot = NET_PROT_IP;
+	kg_cfg.extracts[0].extract.from_hdr.field = NH_FLD_IP_PROTO;
+	kg_cfg.extracts[0].type = DPKG_EXTRACT_FROM_HDR;
+	kg_cfg.extracts[0].extract.from_hdr.type = DPKG_FULL_FIELD;
+	kg_cfg.num_extracts = 1;
+
+	ret = dpkg_prepare_key_cfg(&kg_cfg, key_cfg_iova);
+	if (ret) {
+		DPAA2_PMD_ERR("dpkg_prepare_key_cfg failed: err(%d)", ret);
+		goto creation_error;
+	}
+
+	ret = dpdmux_set_custom_key(&dpdmux_dev->dpdmux, CMD_PRI_LOW,
+				    dpdmux_dev->token,
+			(uint64_t)(DPAA2_VADDR_TO_IOVA(key_cfg_iova)));
+	if (ret) {
+		DPAA2_PMD_ERR("dpdmux_set_custom_key failed: err(%d)", ret);
+		goto creation_error;
+	}
+
+	/* As now our key extract parameters are set, let us configure
+	 * the rule.
+	 */
+	flow = rte_zmalloc(NULL, sizeof(struct rte_flow) +
+			   (2 * DIST_PARAM_IOVA_SIZE), RTE_CACHE_LINE_SIZE);
+	if (!flow) {
+		DPAA2_PMD_ERR(
+			"Memory allocation failure for rule configration\n");
+		goto creation_error;
+	}
+	key_iova = (void *)((size_t)flow + sizeof(struct rte_flow));
+	mask_iova = (void *)((size_t)key_iova + DIST_PARAM_IOVA_SIZE);
+
+	spec = (const struct rte_flow_item_ipv4 *)pattern[0]->spec;
+	memcpy(key_iova, (const void *)&spec->hdr.next_proto_id,
+	       sizeof(uint8_t));
+	memcpy(mask_iova, pattern[0]->mask, sizeof(uint8_t));
+
+	flow->rule.key_iova = (uint64_t)(DPAA2_VADDR_TO_IOVA(key_iova));
+	flow->rule.mask_iova = (uint64_t)(DPAA2_VADDR_TO_IOVA(mask_iova));
+	flow->rule.key_size = sizeof(uint8_t);
+
+	vf_conf = (const struct rte_flow_action_vf *)(actions[0]->conf);
+	if (vf_conf->id == 0 || vf_conf->id > dpdmux_dev->num_ifs) {
+		DPAA2_PMD_ERR("Invalid destination id\n");
+		goto creation_error;
+	}
+	dpdmux_action.dest_if = vf_conf->id;
+
+	ret = dpdmux_add_custom_cls_entry(&dpdmux_dev->dpdmux, CMD_PRI_LOW,
+					  dpdmux_dev->token, &flow->rule,
+					  &dpdmux_action);
+	if (ret) {
+		DPAA2_PMD_ERR("dpdmux_add_custom_cls_entry failed: err(%d)",
+			      ret);
+		goto creation_error;
+	}
+
+	return flow;
+
+creation_error:
+	rte_free((void *)key_cfg_iova);
+	rte_free((void *)flow);
+	return NULL;
+}
+
+static int
+dpaa2_create_dpdmux_device(int vdev_fd __rte_unused,
+			   struct vfio_device_info *obj_info __rte_unused,
+			   int dpdmux_id)
+{
+	struct dpaa2_dpdmux_dev *dpdmux_dev;
+	struct dpdmux_attr attr;
+	int ret;
+
+	PMD_INIT_FUNC_TRACE();
+
+	/* Allocate DPAA2 dpdmux handle */
+	dpdmux_dev = rte_malloc(NULL, sizeof(struct dpaa2_dpdmux_dev), 0);
+	if (!dpdmux_dev) {
+		DPAA2_PMD_ERR("Memory allocation failed for DPDMUX Device");
+		return -1;
+	}
+
+	/* Open the dpdmux object */
+	dpdmux_dev->dpdmux.regs = rte_mcp_ptr_list[MC_PORTAL_INDEX];
+	ret = dpdmux_open(&dpdmux_dev->dpdmux, CMD_PRI_LOW, dpdmux_id,
+			  &dpdmux_dev->token);
+	if (ret) {
+		DPAA2_PMD_ERR("Unable to open dpdmux object: err(%d)", ret);
+		goto init_err;
+	}
+
+	ret = dpdmux_get_attributes(&dpdmux_dev->dpdmux, CMD_PRI_LOW,
+				    dpdmux_dev->token, &attr);
+	if (ret) {
+		DPAA2_PMD_ERR("Unable to get dpdmux attr: err(%d)", ret);
+		goto init_err;
+	}
+
+	ret = dpdmux_if_set_default(&dpdmux_dev->dpdmux, CMD_PRI_LOW,
+				    dpdmux_dev->token, 1);
+	if (ret) {
+		DPAA2_PMD_ERR("setting default interface failed in %s",
+			      __func__);
+		goto init_err;
+	}
+
+	dpdmux_dev->dpdmux_id = dpdmux_id;
+	dpdmux_dev->num_ifs = attr.num_ifs;
+
+	TAILQ_INSERT_TAIL(&dpdmux_dev_list, dpdmux_dev, next);
+
+	return 0;
+
+init_err:
+	if (dpdmux_dev)
+		rte_free(dpdmux_dev);
+
+	return -1;
+}
+
+static struct rte_dpaa2_object rte_dpaa2_dpdmux_obj = {
+	.dev_type = DPAA2_MUX,
+	.create = dpaa2_create_dpdmux_device,
+};
+
+RTE_PMD_REGISTER_DPAA2_OBJECT(dpdmux, rte_dpaa2_dpdmux_obj);
diff --git a/drivers/net/dpaa2/meson.build b/drivers/net/dpaa2/meson.build
index c7c2df417..801cbf5d7 100644
--- a/drivers/net/dpaa2/meson.build
+++ b/drivers/net/dpaa2/meson.build
@@ -9,6 +9,7 @@ endif
 
 deps += ['mempool_dpaa2']
 sources = files('base/dpaa2_hw_dpni.c',
+		'dpaa2_mux.c',
 		'dpaa2_ethdev.c',
 		'dpaa2_rxtx.c',
 		'mc/dpkg.c',
diff --git a/drivers/net/dpaa2/rte_pmd_dpaa2.h b/drivers/net/dpaa2/rte_pmd_dpaa2.h
index f9303acad..57de27f21 100644
--- a/drivers/net/dpaa2/rte_pmd_dpaa2.h
+++ b/drivers/net/dpaa2/rte_pmd_dpaa2.h
@@ -36,4 +36,27 @@ enum pmd_dpaa2_ts {
 __rte_experimental
 void rte_pmd_dpaa2_set_timestamp(enum pmd_dpaa2_ts);
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Create a flow rule to demultiplex ethernet traffic to separate network
+ * interfaces.
+ *
+ * @param dpdmux_id
+ *    ID of the DPDMUX MC object.
+ * @param[in] pattern
+ *    Pattern specification.
+ * @param[in] actions
+ *    Associated actions.
+ *
+ * @return
+ *    A valid handle in case of success, NULL otherwise.
+ */
+__rte_experimental
+struct rte_flow *
+rte_pmd_dpaa2_mux_flow_create(uint32_t dpdmux_id,
+			      struct rte_flow_item *pattern[],
+			      struct rte_flow_action *actions[]);
+
 #endif /* _RTE_PMD_DPAA2_H */
diff --git a/drivers/net/dpaa2/rte_pmd_dpaa2_version.map b/drivers/net/dpaa2/rte_pmd_dpaa2_version.map
index de95a03cd..1661c5fb5 100644
--- a/drivers/net/dpaa2/rte_pmd_dpaa2_version.map
+++ b/drivers/net/dpaa2/rte_pmd_dpaa2_version.map
@@ -14,5 +14,6 @@ DPDK_17.11 {
 EXPERIMENTAL {
 	global:
 
+	rte_pmd_dpaa2_mux_flow_create;
 	rte_pmd_dpaa2_set_timestamp;
 } DPDK_17.11;
-- 
2.17.1