From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: "dev@dpdk.org" <dev@dpdk.org>
Cc: "ferruh.yigit@intel.com" <ferruh.yigit@intel.com>,
Shreyansh Jain <shreyansh.jain@nxp.com>,
Youri Querry <youri.querry_1@nxp.com>,
"stable@dpdk.org" <stable@dpdk.org>
Subject: [dpdk-dev] [PATCH 02/20] bus/fslmc: fix the ring mode to use correct cache settings
Date: Thu, 27 Dec 2018 06:22:54 +0000 [thread overview]
Message-ID: <20181227062233.30781-3-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <20181227062233.30781-1-hemant.agrawal@nxp.com>
From: Youri Querry <youri.querry_1@nxp.com>
The code was incorrectly using the cache inhibited access.
It shall use cached enabled access for better performance.
Fixes: 293c0ca94c36 ("bus/fslmc: support memory backed portals with QBMAN 5.0")
Cc: stable@dpdk.org
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
---
drivers/bus/fslmc/qbman/qbman_portal.c | 12 ++++++------
drivers/bus/fslmc/qbman/qbman_sys.h | 1 +
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/bus/fslmc/qbman/qbman_portal.c b/drivers/bus/fslmc/qbman/qbman_portal.c
index 3380e54f5..bbea37efc 100644
--- a/drivers/bus/fslmc/qbman/qbman_portal.c
+++ b/drivers/bus/fslmc/qbman/qbman_portal.c
@@ -683,8 +683,8 @@ static int qbman_swp_enqueue_ring_mode_mem_back(struct qbman_swp *s,
full_mask = s->eqcr.pi_mask;
if (!s->eqcr.available) {
eqcr_ci = s->eqcr.ci;
- s->eqcr.ci = qbman_cinh_read(&s->sys,
- QBMAN_CENA_SWP_EQCR_CI) & full_mask;
+ s->eqcr.ci = qbman_cena_read_reg(&s->sys,
+ QBMAN_CENA_SWP_EQCR_CI_MEMBACK) & full_mask;
s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
eqcr_ci, s->eqcr.ci);
if (!s->eqcr.available)
@@ -809,8 +809,8 @@ static int qbman_swp_enqueue_multiple_mem_back(struct qbman_swp *s,
full_mask = s->eqcr.pi_mask;
if (!s->eqcr.available) {
eqcr_ci = s->eqcr.ci;
- s->eqcr.ci = qbman_cinh_read(&s->sys,
- QBMAN_CENA_SWP_EQCR_CI) & full_mask;
+ s->eqcr.ci = qbman_cena_read_reg(&s->sys,
+ QBMAN_CENA_SWP_EQCR_CI_MEMBACK) & full_mask;
s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
eqcr_ci, s->eqcr.ci);
if (!s->eqcr.available)
@@ -941,8 +941,8 @@ static int qbman_swp_enqueue_multiple_desc_mem_back(struct qbman_swp *s,
full_mask = s->eqcr.pi_mask;
if (!s->eqcr.available) {
eqcr_ci = s->eqcr.ci;
- s->eqcr.ci = qbman_cinh_read(&s->sys,
- QBMAN_CENA_SWP_EQCR_CI) & full_mask;
+ s->eqcr.ci = qbman_cena_read_reg(&s->sys,
+ QBMAN_CENA_SWP_EQCR_CI_MEMBACK) & full_mask;
s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
eqcr_ci, s->eqcr.ci);
if (!s->eqcr.available)
diff --git a/drivers/bus/fslmc/qbman/qbman_sys.h b/drivers/bus/fslmc/qbman/qbman_sys.h
index d41af8358..0571097ab 100644
--- a/drivers/bus/fslmc/qbman/qbman_sys.h
+++ b/drivers/bus/fslmc/qbman/qbman_sys.h
@@ -55,6 +55,7 @@
#define QBMAN_CENA_SWP_RR(vb) (0x700 + ((uint32_t)(vb) >> 1))
#define QBMAN_CENA_SWP_VDQCR 0x780
#define QBMAN_CENA_SWP_EQCR_CI 0x840
+#define QBMAN_CENA_SWP_EQCR_CI_MEMBACK 0x1840
/* CENA register offsets in memory-backed mode */
#define QBMAN_CENA_SWP_DQRR_MEM(n) (0x800 + ((uint32_t)(n) << 6))
--
2.17.1
next prev parent reply other threads:[~2018-12-27 6:22 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-27 6:22 [dpdk-dev] [PATCH 00/20] NXP DPAA2 fixes and enhancements Hemant Agrawal
2018-12-27 6:22 ` [dpdk-dev] [PATCH 01/20] bus/fslmc: fix to reset portal memory before use Hemant Agrawal
2018-12-27 6:22 ` Hemant Agrawal [this message]
2018-12-27 6:22 ` [dpdk-dev] [PATCH 03/20] bus/fslmc: fix to use correct physical core for logical core Hemant Agrawal
2018-12-27 6:22 ` [dpdk-dev] [PATCH 04/20] net/dpaa2: fix bad check for not-null Hemant Agrawal
2018-12-27 6:22 ` [dpdk-dev] [PATCH 05/20] bus/fslmc: fix to convert error msg to warning Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 06/20] bus/fslmc: fix parse method for bus devices Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 07/20] net/dpaa2: fix device init for secondary process Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 08/20] net/dpaa2: enable optional timestamp in mbuf Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 09/20] bus/fslmc: upgrade to latest qbman library Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 10/20] bus/fslmc: add dynamic config for memback portal mode Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 11/20] bus/fslmc: rename portal pi index to consumer index Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 12/20] bus/fslmc: make portal func static Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 13/20] net/dpaa2: add dpdmux mc flib Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 14/20] bus/fslmc: add support for scanning DPDMUX object Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 15/20] net/dpaa2: add dpdmux initialization and configuration Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 16/20] net/dpaa2: add API to support custom hash key Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 17/20] mempool/dpaa2: support saving context of buffer pool Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 18/20] net/dpaa2: change ref of device to private device Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 19/20] bus/fslmc: add support for secondary processes Hemant Agrawal
2018-12-27 6:23 ` [dpdk-dev] [PATCH 20/20] bus/fslmc: add function to map any addr via VFIO Hemant Agrawal
2019-01-08 14:10 ` Ferruh Yigit
2019-01-10 9:58 ` Shreyansh Jain
2019-01-11 11:58 ` Ferruh Yigit
2019-01-11 12:16 ` Shreyansh Jain
2019-01-11 11:57 ` [dpdk-dev] [PATCH v2 00/20] NXP DPAA2 fixes and enhancements Shreyansh Jain
2019-01-11 11:57 ` [dpdk-dev] [PATCH v2 01/20] bus/fslmc: fix to reset portal memory before use Shreyansh Jain
2019-01-11 11:57 ` [dpdk-dev] [PATCH v2 02/20] bus/fslmc: fix the ring mode to use correct cache settings Shreyansh Jain
2019-01-11 11:57 ` [dpdk-dev] [PATCH v2 03/20] bus/fslmc: fix to use correct physical core for logical core Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 04/20] net/dpaa2: fix bad check for not-null Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 05/20] bus/fslmc: fix to convert error msg to warning Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 06/20] bus/fslmc: fix parse method for bus devices Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 07/20] net/dpaa2: fix device init for secondary process Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 08/20] net/dpaa2: enable optional timestamp in mbuf Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 09/20] bus/fslmc: upgrade to latest qbman library Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 10/20] bus/fslmc: add dynamic config for memback portal mode Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 11/20] bus/fslmc: rename portal pi index to consumer index Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 12/20] bus/fslmc: make portal func static Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 13/20] net/dpaa2: add dpdmux mc flib Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 14/20] bus/fslmc: add support for scanning DPDMUX object Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 15/20] net/dpaa2: add dpdmux initialization and configuration Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 16/20] net/dpaa2: add API to support custom hash key Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 17/20] mempool/dpaa2: support saving context of buffer pool Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 18/20] net/dpaa2: change reference to private device Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 19/20] bus/fslmc: add support for secondary processes Shreyansh Jain
2019-01-11 11:58 ` [dpdk-dev] [PATCH v2 20/20] bus/fslmc: add function to map any addr via VFIO Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 00/20] NXP DPAA2 fixes and enhancements Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 01/19] bus/fslmc: fix to reset portal memory before use Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 02/19] bus/fslmc: fix the ring mode to use correct cache settings Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 03/19] bus/fslmc: fix to use correct physical core for logical core Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 04/19] net/dpaa2: fix bad check for not-null Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 05/19] bus/fslmc: fix to convert error msg to warning Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 06/19] bus/fslmc: fix parse method for bus devices Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 07/19] net/dpaa2: fix device init for secondary process Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 08/19] net/dpaa2: enable optional timestamp in mbuf Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 09/19] bus/fslmc: upgrade to latest qbman library Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 10/19] bus/fslmc: add dynamic config for memback portal mode Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 11/19] bus/fslmc: rename portal pi index to consumer index Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 12/19] bus/fslmc: make portal func static Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 13/19] net/dpaa2: add dpdmux mc flib Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 14/19] bus/fslmc: add support for scanning DPDMUX object Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 15/19] net/dpaa2: add dpdmux initialization and configuration Shreyansh Jain
2019-01-11 12:24 ` [dpdk-dev] [PATCH v3 16/19] net/dpaa2: add API to support custom hash key Shreyansh Jain
2019-01-11 12:25 ` [dpdk-dev] [PATCH v3 17/19] mempool/dpaa2: support saving context of buffer pool Shreyansh Jain
2019-01-11 12:25 ` [dpdk-dev] [PATCH v3 18/19] net/dpaa2: change reference to private device Shreyansh Jain
2019-01-11 12:25 ` [dpdk-dev] [PATCH v3 19/19] bus/fslmc: add support for secondary processes Shreyansh Jain
2019-01-11 15:51 ` [dpdk-dev] [PATCH v3 00/20] NXP DPAA2 fixes and enhancements Ferruh Yigit
2019-01-11 16:12 ` Ferruh Yigit
2019-01-14 5:20 ` Shreyansh Jain
2019-01-14 5:19 ` Shreyansh Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181227062233.30781-3-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=shreyansh.jain@nxp.com \
--cc=stable@dpdk.org \
--cc=youri.querry_1@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).