From: Julien Meunier <julien.meunier@nokia.com>
To: <konstantin.ananyev@intel.com>, <wenzhuo.lu@intel.com>,
<wei.zhao1@intel.com>, <qi.z.zhang@intel.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH 1/2] net/ixgbe: do not start on unsupported loopback mode
Date: Thu, 7 Feb 2019 19:30:04 +0200 [thread overview]
Message-ID: <20190207173005.38372-1-julien.meunier@nokia.com> (raw)
In-Reply-To: <20190102160055.30301-1-julien.meunier@nokia.com>
Only TX->RX loopback is supported currently on 82599EB. If a user wants
to apply an another loopback configuration (!= IXGBE_LPBK_82599_TX_RX),
ixgbe PMD ignores it and continues the configuration without raising any
error.
Let's robustify this part by checking if the requested loopback mode is
correct for the current device, before starting it. If it is not valid,
PMD will refuse to start.
Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
---
v2:
- factorize code
- check if loopback is really supported
---
drivers/net/ixgbe/ixgbe_ethdev.c | 13 +++++++++----
drivers/net/ixgbe/ixgbe_rxtx.c | 37 +++++++++++++++++++++++++++++--------
drivers/net/ixgbe/ixgbe_rxtx.h | 2 ++
3 files changed, 40 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 7493110..558f60b 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -2652,10 +2652,15 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
goto error;
}
- /* Skip link setup if loopback mode is enabled for 82599. */
- if (hw->mac.type == ixgbe_mac_82599EB &&
- dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
- goto skip_link_setup;
+ /* Skip link setup if loopback mode is enabled. */
+ if (dev->data->dev_conf.lpbk_mode != 0) {
+ err = ixgbe_check_supported_loopback_mode(dev);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, "Unsupported loopback mode");
+ goto error;
+ } else
+ goto skip_link_setup;
+ }
if (ixgbe_is_sfp(hw) && hw->phy.multispeed_fiber) {
err = hw->mac.ops.setup_sfp(hw);
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 9a79d18..c9a70a8 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -4879,13 +4879,18 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
/*
- * If loopback mode is configured for 82599, set LPBK bit.
+ * If loopback mode is configured, set LPBK bit.
*/
- if (hw->mac.type == ixgbe_mac_82599EB &&
- dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
+ if (dev->data->dev_conf.lpbk_mode != 0) {
+ rc = ixgbe_check_supported_loopback_mode(dev);
+ if (rc < 0) {
+ PMD_INIT_LOG(ERR, "Unsupported loopback mode");
+ return rc;
+ }
hlreg0 |= IXGBE_HLREG0_LPBK;
- else
+ } else {
hlreg0 &= ~IXGBE_HLREG0_LPBK;
+ }
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
@@ -5062,6 +5067,21 @@ ixgbe_dev_tx_init(struct rte_eth_dev *dev)
}
/*
+ * Check if requested loopback mode is supported
+ */
+int
+ixgbe_check_supported_loopback_mode(struct rte_eth_dev *dev)
+{
+ struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+ if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
+ if (hw->mac.type == ixgbe_mac_82599EB)
+ return 0;
+
+ return -ENOTSUP;
+}
+
+/*
* Set up link for 82599 loopback mode Tx->Rx.
*/
static inline void __attribute__((cold))
@@ -5148,10 +5168,11 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
rxctrl |= IXGBE_RXCTRL_RXEN;
hw->mac.ops.enable_rx_dma(hw, rxctrl);
- /* If loopback mode is enabled for 82599, set up the link accordingly */
- if (hw->mac.type == ixgbe_mac_82599EB &&
- dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
- ixgbe_setup_loopback_link_82599(hw);
+ /* If loopback mode is enabled, set up the link accordingly */
+ if (dev->data->dev_conf.lpbk_mode != 0) {
+ if (hw->mac.type == ixgbe_mac_82599EB)
+ ixgbe_setup_loopback_link_82599(hw);
+ }
#ifdef RTE_LIBRTE_SECURITY
if ((dev->data->dev_conf.rxmode.offloads &
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h
index 39378f7..2d8011d 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.h
+++ b/drivers/net/ixgbe/ixgbe_rxtx.h
@@ -276,6 +276,8 @@ void ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq);
*/
void ixgbe_set_rx_function(struct rte_eth_dev *dev);
+int ixgbe_check_supported_loopback_mode(struct rte_eth_dev *dev);
+
uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts);
uint16_t ixgbe_recv_scattered_pkts_vec(void *rx_queue,
--
2.10.2
next prev parent reply other threads:[~2019-02-07 17:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-02 16:00 [dpdk-dev] [PATCH] net/ixgbe: add support of loopback for X540/X550 Julien Meunier
2019-01-07 6:53 ` Zhang, Qi Z
2019-01-07 15:53 ` Meunier, Julien (Nokia - FR/Paris-Saclay)
2019-01-08 10:10 ` Zhao1, Wei
2019-01-08 12:39 ` Zhang, Qi Z
2019-01-08 20:18 ` Meunier, Julien (Nokia - FR/Paris-Saclay)
2019-01-09 1:30 ` Zhao1, Wei
2019-01-07 10:05 ` Zhao1, Wei
2019-01-07 16:04 ` Meunier, Julien (Nokia - FR/Paris-Saclay)
2019-01-08 3:10 ` Zhao1, Wei
2019-02-07 17:30 ` Julien Meunier [this message]
2019-02-07 17:30 ` [dpdk-dev] [PATCH 2/2] " Julien Meunier
2019-02-12 6:37 ` Zhao1, Wei
2019-02-18 11:20 ` Meunier, Julien (Nokia - FR/Paris-Saclay)
2019-02-12 6:36 ` [dpdk-dev] [PATCH 1/2] net/ixgbe: do not start on unsupported loopback mode Zhao1, Wei
2019-02-20 21:05 ` [dpdk-dev] [PATCH v3 " Julien Meunier
2019-02-20 21:05 ` [dpdk-dev] [PATCH v3 2/2] net/ixgbe: add support of loopback for X540/X550 Julien Meunier
2019-02-21 2:30 ` Zhao1, Wei
2019-03-01 7:46 ` Zhang, Qi Z
2019-03-01 7:45 ` [dpdk-dev] [PATCH v3 1/2] net/ixgbe: do not start on unsupported loopback mode Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190207173005.38372-1-julien.meunier@nokia.com \
--to=julien.meunier@nokia.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=wei.zhao1@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).