From: Hyong Youb Kim <hyonkim@cisco.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>
Cc: dev@dpdk.org, John Daley <johndale@cisco.com>,
Hyong Youb Kim <hyonkim@cisco.com>
Subject: [dpdk-dev] [PATCH v2 07/13] net/enic: enable limited PASSTHRU flow action
Date: Sat, 2 Mar 2019 02:42:45 -0800 [thread overview]
Message-ID: <20190302104251.32565-8-hyonkim@cisco.com> (raw)
In-Reply-To: <20190302104251.32565-1-hyonkim@cisco.com>
Some apps like VPP use PASSTHRU+MARK flow rules to offload packet
matching to the NIC. Just like MARK+RSS used by OVS-DPDK and others,
PASSTHRU+MARK is used to "mark and then receive normally". Recent VIC
adapters support such flow rules, so enable PASSTHRU for this limited
use case.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
---
doc/guides/nics/enic.rst | 6 +++++-
doc/guides/rel_notes/release_19_05.rst | 1 +
drivers/net/enic/enic_flow.c | 20 ++++++++++++++++++++
3 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst
index ed093ef44..526e58ce9 100644
--- a/doc/guides/nics/enic.rst
+++ b/doc/guides/nics/enic.rst
@@ -256,7 +256,7 @@ Generic Flow API is supported. The baseline support is:
- Attributes: ingress
- Items: eth, ipv4, ipv6, udp, tcp, vxlan, inner eth, ipv4, ipv6, udp, tcp
- - Actions: queue, mark, drop, flag, rss, and void
+ - Actions: queue, mark, drop, flag, rss, passthru, and void
- Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
- In total, up to 64 bytes of mask is allowed across all headers
@@ -451,6 +451,10 @@ PKT_RX_VLAN_STRIPPED mbuf flags would not be set. This mode is enabled with the
were added. Since there currently is no grouping or priority support,
'catch-all' filters should be added last.
- The supported range of IDs for the 'MARK' action is 0 - 0xFFFD.
+ - RSS and PASSTHRU actions only support "receive normally". They are limited
+ to supporting MARK + RSS and PASSTHRU + MARK to allow the application to mark
+ packets and then receive them normally. These require 1400 series VIC adapters
+ and latest firmware.
- **Statistics**
diff --git a/doc/guides/rel_notes/release_19_05.rst b/doc/guides/rel_notes/release_19_05.rst
index 73403c79e..c8c12c47a 100644
--- a/doc/guides/rel_notes/release_19_05.rst
+++ b/doc/guides/rel_notes/release_19_05.rst
@@ -80,6 +80,7 @@ New Features
* **Updated the enic driver.**
* Added limited support for RSS.
+ * Added limited support for PASSTHRU.
Removed Items
-------------
diff --git a/drivers/net/enic/enic_flow.c b/drivers/net/enic/enic_flow.c
index 0f6b6b930..c6ed9e1b9 100644
--- a/drivers/net/enic/enic_flow.c
+++ b/drivers/net/enic/enic_flow.c
@@ -283,6 +283,7 @@ static const enum rte_flow_action_type enic_supported_actions_v2_id[] = {
RTE_FLOW_ACTION_TYPE_MARK,
RTE_FLOW_ACTION_TYPE_FLAG,
RTE_FLOW_ACTION_TYPE_RSS,
+ RTE_FLOW_ACTION_TYPE_PASSTHRU,
RTE_FLOW_ACTION_TYPE_END,
};
@@ -292,6 +293,7 @@ static const enum rte_flow_action_type enic_supported_actions_v2_drop[] = {
RTE_FLOW_ACTION_TYPE_FLAG,
RTE_FLOW_ACTION_TYPE_DROP,
RTE_FLOW_ACTION_TYPE_RSS,
+ RTE_FLOW_ACTION_TYPE_PASSTHRU,
RTE_FLOW_ACTION_TYPE_END,
};
@@ -302,6 +304,7 @@ static const enum rte_flow_action_type enic_supported_actions_v2_count[] = {
RTE_FLOW_ACTION_TYPE_DROP,
RTE_FLOW_ACTION_TYPE_COUNT,
RTE_FLOW_ACTION_TYPE_RSS,
+ RTE_FLOW_ACTION_TYPE_PASSTHRU,
RTE_FLOW_ACTION_TYPE_END,
};
@@ -1072,6 +1075,7 @@ enic_copy_action_v2(struct enic *enic,
{
enum { FATE = 1, MARK = 2, };
uint32_t overlap = 0;
+ bool passthru = false;
FLOW_TRACE();
@@ -1164,6 +1168,19 @@ enic_copy_action_v2(struct enic *enic,
overlap |= FATE;
break;
}
+ case RTE_FLOW_ACTION_TYPE_PASSTHRU: {
+ /*
+ * Like RSS above, PASSTHRU + MARK may be used to
+ * "mark and then receive normally". MARK usually comes
+ * after PASSTHRU, so remember we have seen passthru
+ * and check for mark later.
+ */
+ if (overlap & FATE)
+ return ENOTSUP;
+ overlap |= FATE;
+ passthru = true;
+ break;
+ }
case RTE_FLOW_ACTION_TYPE_VOID:
continue;
default:
@@ -1171,6 +1188,9 @@ enic_copy_action_v2(struct enic *enic,
break;
}
}
+ /* Only PASSTHRU + MARK is allowed */
+ if (passthru && !(overlap & MARK))
+ return ENOTSUP;
if (!(overlap & FATE))
return ENOTSUP;
enic_action->type = FILTER_ACTION_V2;
--
2.16.2
next prev parent reply other threads:[~2019-03-02 10:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-02 10:42 [dpdk-dev] [PATCH v2 00/13] net/enic: 19.05 updates Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 01/13] net/enic: remove unused code Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 02/13] net/enic: fix flow director SCTP matching Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 03/13] net/enic: fix SCTP match for flow API Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 04/13] net/enic: allow flow mark ID 0 Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 05/13] net/enic: check for unsupported flow item types Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 06/13] net/enic: enable limited RSS flow action Hyong Youb Kim
2019-03-02 10:42 ` Hyong Youb Kim [this message]
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 08/13] net/enic: move arguments into struct Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 09/13] net/enic: enable limited support for RAW flow item Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 10/13] net/enic: reset VXLAN port regardless of overlay offload Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 11/13] net/enic: fix a couple issues with VXLAN match Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 12/13] net/enic: fix an endian bug in VLAN match Hyong Youb Kim
2019-03-02 10:42 ` [dpdk-dev] [PATCH v2 13/13] net/enic: fix several issues with inner packet matching Hyong Youb Kim
2019-03-04 16:58 ` Ferruh Yigit
2019-04-10 17:06 ` Kevin Traynor
2019-04-10 17:06 ` Kevin Traynor
2019-03-04 16:56 ` [dpdk-dev] [PATCH v2 00/13] net/enic: 19.05 updates Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190302104251.32565-8-hyonkim@cisco.com \
--to=hyonkim@cisco.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=johndale@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).