From: Damian Nowak <damianx.nowak@intel.com>
To: dev@dpdk.org
Cc: fiona.trahe@intel.com, Damian Nowak <damianx.nowak@intel.com>
Subject: [dpdk-dev] [PATCH v2 1/3] test/crypto: add tests for XTS on QAT
Date: Wed, 13 Mar 2019 15:52:11 +0100 [thread overview]
Message-ID: <20190313145213.1269-2-damianx.nowak@intel.com> (raw)
In-Reply-To: <20190313145213.1269-1-damianx.nowak@intel.com>
This patch adds test vectors for AES XTS mode
on QAT. It uses different plaintext sizes
and AES keys sizes of 128 and 256 bits.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
---
app/test/test_cryptodev_aes_test_vectors.h | 223 ++++++++++++++++++++++++++++-
1 file changed, 222 insertions(+), 1 deletion(-)
diff --git a/app/test/test_cryptodev_aes_test_vectors.h b/app/test/test_cryptodev_aes_test_vectors.h
index 6dd8e5f..960c3b1 100644
--- a/app/test/test_cryptodev_aes_test_vectors.h
+++ b/app/test/test_cryptodev_aes_test_vectors.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2016-2017 Intel Corporation
+ * Copyright(c) 2016-2019 Intel Corporation
*/
#ifndef TEST_CRYPTODEV_AES_TEST_VECTORS_H_
@@ -1077,6 +1077,179 @@ static const struct blockcipher_test_data aes_test_data_13 = {
}
};
+/** XTS-AES-128 test vector (2 keys * 128 bit) */
+static const uint8_t plaintext_aes128xts_16bytes[] = {
+ 0xEB, 0xAB, 0xCE, 0x95, 0xB1, 0x4D, 0x3C, 0x8D,
+ 0x6F, 0xB3, 0x50, 0x39, 0x07, 0x90, 0x31, 0x1C
+};
+static const uint8_t ciphertext_aes128xts_16bytes[] = {
+ 0x77, 0x8A, 0xE8, 0xB4, 0x3C, 0xB9, 0x8D, 0x5A,
+ 0x82, 0x50, 0x81, 0xD5, 0xBE, 0x47, 0x1C, 0x63
+};
+static const struct
+blockcipher_test_data aes_test_data_xts_key_32_pt_16 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_XTS,
+ .cipher_key = {
+ .data = {
+ 0xA1, 0xB9, 0x0C, 0xBA, 0x3F, 0x06, 0xAC, 0x35,
+ 0x3B, 0x2C, 0x34, 0x38, 0x76, 0x08, 0x17, 0x62,
+ 0x09, 0x09, 0x23, 0x02, 0x6E, 0x91, 0x77, 0x18,
+ 0x15, 0xF2, 0x9D, 0xAB, 0x01, 0x93, 0x2F, 0x2F
+ },
+ .len = 32
+ },
+ .iv = {
+ .data = {
+ 0x4F, 0xAE, 0xF7, 0x11, 0x7C, 0xDA, 0x59, 0xC6,
+ 0x6E, 0x4B, 0x92, 0x01, 0x3E, 0x76, 0x8A, 0xD5
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes128xts_16bytes,
+ .len = 16
+ },
+ .ciphertext = {
+ .data = ciphertext_aes128xts_16bytes,
+ .len = 16
+ }
+};
+static const uint8_t plaintext_aes128xts_32bytes[] = {
+ 0xB0, 0x4D, 0x84, 0xDA, 0x85, 0x6B, 0x9A, 0x59,
+ 0xCE, 0x2D, 0x62, 0x67, 0x46, 0xF6, 0x89, 0xA8,
+ 0x05, 0x1D, 0xAC, 0xD6, 0xBC, 0xE3, 0xB9, 0x90,
+ 0xAA, 0x90, 0x1E, 0x40, 0x30, 0x64, 0x88, 0x79
+};
+static const uint8_t ciphertext_aes128xts_32bytes[] = {
+ 0xF9, 0x41, 0x03, 0x9E, 0xBA, 0xB8, 0xCA, 0xC3,
+ 0x9D, 0x59, 0x24, 0x7C, 0xBB, 0xCB, 0x4D, 0x81,
+ 0x6C, 0x72, 0x6D, 0xAE, 0xD1, 0x15, 0x77, 0x69,
+ 0x2C, 0x55, 0xE4, 0xAC, 0x6D, 0x3E, 0x68, 0x20
+};
+static const struct
+blockcipher_test_data aes_test_data_xts_key_32_pt_32 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_XTS,
+ .cipher_key = {
+ .data = {
+ 0x78, 0x3A, 0x83, 0xEC, 0x52, 0xA2, 0x74, 0x05,
+ 0xDF, 0xF9, 0xDE, 0x4C, 0x57, 0xF9, 0xC9, 0x79,
+ 0xB3, 0x60, 0xB6, 0xA5, 0xDF, 0x88, 0xD6, 0x7E,
+ 0xC1, 0xA0, 0x52, 0xE6, 0xF5, 0x82, 0xA7, 0x17
+ },
+ .len = 32
+ },
+ .iv = {
+ .data = {
+ 0x88, 0x6E, 0x97, 0x5B, 0x29, 0xBD, 0xF6, 0xF0,
+ 0xC0, 0x1B, 0xB4, 0x7F, 0x61, 0xF6, 0xF0, 0xF5
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes128xts_32bytes,
+ .len = 32
+ },
+ .ciphertext = {
+ .data = ciphertext_aes128xts_32bytes,
+ .len = 32
+ }
+};
+
+/** XTS-AES-256 test vector (2 keys * 256 bit) */
+/* Encryption */
+static const uint8_t plaintext_aes256xts_32bytes[] = {
+ 0x2E, 0xED, 0xEA, 0x52, 0xCD, 0x82, 0x15, 0xE1,
+ 0xAC, 0xC6, 0x47, 0xE8, 0x10, 0xBB, 0xC3, 0x64,
+ 0x2E, 0x87, 0x28, 0x7F, 0x8D, 0x2E, 0x57, 0xE3,
+ 0x6C, 0x0A, 0x24, 0xFB, 0xC1, 0x2A, 0x20, 0x2E
+};
+static const uint8_t ciphertext_aes256xts_32bytes[] = {
+ 0xCB, 0xAA, 0xD0, 0xE2, 0xF6, 0xCE, 0xA3, 0xF5,
+ 0x0B, 0x37, 0xF9, 0x34, 0xD4, 0x6A, 0x9B, 0x13,
+ 0x0B, 0x9D, 0x54, 0xF0, 0x7E, 0x34, 0xF3, 0x6A,
+ 0xF7, 0x93, 0xE8, 0x6F, 0x73, 0xC6, 0xD7, 0xDB
+};
+static const struct
+blockcipher_test_data aes_test_data_xts_key_64_pt_32 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_XTS,
+ .cipher_key = {
+ .data = {
+ 0x1E, 0xA6, 0x61, 0xC5, 0x8D, 0x94, 0x3A, 0x0E,
+ 0x48, 0x01, 0xE4, 0x2F, 0x4B, 0x09, 0x47, 0x14,
+ 0x9E, 0x7F, 0x9F, 0x8E, 0x3E, 0x68, 0xD0, 0xC7,
+ 0x50, 0x52, 0x10, 0xBD, 0x31, 0x1A, 0x0E, 0x7C,
+ 0xD6, 0xE1, 0x3F, 0xFD, 0xF2, 0x41, 0x8D, 0x8D,
+ 0x19, 0x11, 0xC0, 0x04, 0xCD, 0xA5, 0x8D, 0xA3,
+ 0xD6, 0x19, 0xB7, 0xE2, 0xB9, 0x14, 0x1E, 0x58,
+ 0x31, 0x8E, 0xEA, 0x39, 0x2C, 0xF4, 0x1B, 0x08
+ },
+ .len = 64
+ },
+ .iv = {
+ .data = {
+ 0xAD, 0xF8, 0xD9, 0x26, 0x27, 0x46, 0x4A, 0xD2,
+ 0xF0, 0x42, 0x8E, 0x84, 0xA9, 0xF8, 0x75, 0x64
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes256xts_32bytes,
+ .len = 32
+ },
+ .ciphertext = {
+ .data = ciphertext_aes256xts_32bytes,
+ .len = 32
+ }
+};
+static const uint8_t plaintext_aes256xts_48bytes[] = {
+ 0xBB, 0xB2, 0x34, 0xDB, 0x01, 0xBE, 0x79, 0xD3,
+ 0xDC, 0x7D, 0xCF, 0x49, 0xBC, 0x53, 0xB8, 0xEF,
+ 0xC6, 0x2F, 0xE7, 0x17, 0x94, 0x39, 0x06, 0x1D,
+ 0x73, 0xA6, 0xB2, 0x0E, 0xDB, 0x9B, 0x7D, 0xA0,
+ 0x45, 0x0B, 0x19, 0xF0, 0x20, 0x82, 0x02, 0x09,
+ 0xAF, 0xE0, 0x81, 0x12, 0xAE, 0x4A, 0xFD, 0xD3
+};
+static const uint8_t ciphertext_aes256xts_48bytes[] = {
+ 0xCB, 0xF6, 0x88, 0x48, 0xC4, 0x20, 0x49, 0xEF,
+ 0xB1, 0x46, 0xE2, 0xD1, 0xE4, 0x11, 0x5F, 0x62,
+ 0xE4, 0xFA, 0xA4, 0xEF, 0xFF, 0x19, 0x8F, 0x1A,
+ 0x0A, 0xA0, 0xC9, 0x8B, 0xA0, 0x2C, 0xC4, 0x4D,
+ 0xA3, 0x76, 0xD7, 0x62, 0xD6, 0x15, 0x1F, 0x23,
+ 0x45, 0x87, 0xBF, 0x12, 0x8B, 0x6A, 0x7F, 0xFA
+};
+static const struct
+blockcipher_test_data aes_test_data_xts_key_64_pt_48 = {
+ .crypto_algo = RTE_CRYPTO_CIPHER_AES_XTS,
+ .cipher_key = {
+ .data = {
+ 0x7F, 0xB0, 0x92, 0x2F, 0xCE, 0x09, 0xED, 0xDD,
+ 0x36, 0x65, 0xA1, 0x1F, 0x52, 0x35, 0xD5, 0x1E,
+ 0xF7, 0x72, 0x06, 0xA7, 0xDE, 0x45, 0x47, 0x75,
+ 0xB6, 0x9D, 0xCC, 0x54, 0x59, 0xAC, 0xDB, 0x24,
+ 0xCC, 0xF0, 0x5C, 0x41, 0x5A, 0xF5, 0xAB, 0x8A,
+ 0x06, 0x62, 0x3D, 0x19, 0x8D, 0x5B, 0x91, 0x85,
+ 0x95, 0xA9, 0xDC, 0xAA, 0xF5, 0x39, 0x2E, 0xE7,
+ 0x17, 0xC1, 0x04, 0x7F, 0x2F, 0x08, 0xF6, 0x2B
+ },
+ .len = 64
+ },
+ .iv = {
+ .data = {
+ 0x8E, 0xA3, 0x63, 0x8B, 0x9D, 0x40, 0x62, 0xF1,
+ 0x69, 0x19, 0x6F, 0xF4, 0x55, 0x5A, 0xD0, 0xAF
+ },
+ .len = 16
+ },
+ .plaintext = {
+ .data = plaintext_aes256xts_48bytes,
+ .len = 48
+ },
+ .ciphertext = {
+ .data = ciphertext_aes256xts_48bytes,
+ .len = 48
+ }
+};
+
/* AES-DOCSIS-BPI test vectors */
/* Multiple of AES block size */
@@ -1821,6 +1994,54 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_OCTEONTX
+ },
+ {
+ .test_descr = "AES-128-XTS Encryption (16-byte plaintext)",
+ .test_data = &aes_test_data_xts_key_32_pt_16,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-XTS Decryption (16-byte plaintext)",
+ .test_data = &aes_test_data_xts_key_32_pt_16,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-XTS Encryption (32-byte plaintext)",
+ .test_data = &aes_test_data_xts_key_32_pt_32,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-128-XTS Decryption (32-byte plaintext)",
+ .test_data = &aes_test_data_xts_key_32_pt_32,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-256-XTS Encryption (32-byte plaintext)",
+ .test_data = &aes_test_data_xts_key_64_pt_32,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-256-XTS Decryption (32-byte plaintext)",
+ .test_data = &aes_test_data_xts_key_64_pt_32,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-256-XTS Encryption (48-byte plaintext)",
+ .test_data = &aes_test_data_xts_key_64_pt_48,
+ .op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ },
+ {
+ .test_descr = "AES-256-XTS Decryption (48-byte plaintext)",
+ .test_data = &aes_test_data_xts_key_64_pt_48,
+ .op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
}
};
--
2.7.4
next prev parent reply other threads:[~2019-03-13 14:52 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 16:18 [dpdk-dev] [PATCH 0/3] Add XTS support for Intel QuickAssist Technology Damian Nowak
2019-02-28 16:18 ` [dpdk-dev] [PATCH 1/3] test/crypto: add tests for XTS on QAT Damian Nowak
2019-02-28 16:18 ` [dpdk-dev] [PATCH 2/3] crypto/qat: add XTS for QAT session config Damian Nowak
2019-02-28 16:18 ` [dpdk-dev] [PATCH 3/3] cryptodev: remove XTS text duplication Damian Nowak
2019-03-13 14:52 ` [dpdk-dev] [PATCH v2 0/3] add XTS support for Intel QAT Damian Nowak
2019-03-13 14:52 ` Damian Nowak [this message]
2019-03-13 14:52 ` [dpdk-dev] [PATCH v2 2/3] crypto/qat: add XTS for QAT session config Damian Nowak
2019-03-13 14:52 ` [dpdk-dev] [PATCH v2 3/3] cryptodev: remove XTS text duplication Damian Nowak
2019-03-13 17:51 ` [dpdk-dev] [PATCH v2 0/3] add XTS support for Intel QAT Trahe, Fiona
2019-03-22 15:08 ` Akhil Goyal
2019-03-22 15:08 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190313145213.1269-2-damianx.nowak@intel.com \
--to=damianx.nowak@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).