From: Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>
To: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>
Subject: [dpdk-dev] [PATCH] app/eventdev: add option to set global dequeue tmo
Date: Tue, 19 Mar 2019 06:21:59 +0000 [thread overview]
Message-ID: <20190319061845.12343-1-pbhagavatula@marvell.com> (raw)
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the worker
ports. If the eventdev hardware supports power management through
dequeue timeout then this option can be used for verifying power
demands at various packet rates.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
app/test-eventdev/evt_options.c | 13 +++++++++++++
app/test-eventdev/evt_options.h | 2 ++
app/test-eventdev/test_order_atq.c | 1 +
app/test-eventdev/test_order_queue.c | 1 +
app/test-eventdev/test_perf_atq.c | 1 +
app/test-eventdev/test_perf_queue.c | 1 +
app/test-eventdev/test_pipeline_atq.c | 1 +
app/test-eventdev/test_pipeline_queue.c | 1 +
8 files changed, 21 insertions(+)
diff --git a/app/test-eventdev/evt_options.c b/app/test-eventdev/evt_options.c
index cfa43a165..af5c08bac 100644
--- a/app/test-eventdev/evt_options.c
+++ b/app/test-eventdev/evt_options.c
@@ -84,6 +84,16 @@ evt_parse_queue_priority(struct evt_options *opt, const char *arg __rte_unused)
return 0;
}
+static int
+evt_parse_deq_tmo_nsec(struct evt_options *opt, const char *arg)
+{
+ int ret;
+
+ ret = parser_read_uint32(&(opt->deq_tmo_nsec), arg);
+
+ return ret;
+}
+
static int
evt_parse_eth_prod_type(struct evt_options *opt, const char *arg __rte_unused)
{
@@ -240,6 +250,7 @@ usage(char *program)
"\t--worker_deq_depth : dequeue depth of the worker\n"
"\t--fwd_latency : perform fwd_latency measurement\n"
"\t--queue_priority : enable queue priority\n"
+ "\t--deq_tmo_nsec : global dequeue timeout\n"
"\t--prod_type_ethdev : use ethernet device as producer.\n"
"\t--prod_type_timerdev : use event timer device as producer.\n"
"\t expity_nsec would be the timeout\n"
@@ -311,6 +322,7 @@ static struct option lgopts[] = {
{ EVT_SCHED_TYPE_LIST, 1, 0, 0 },
{ EVT_FWD_LATENCY, 0, 0, 0 },
{ EVT_QUEUE_PRIORITY, 0, 0, 0 },
+ { EVT_DEQ_TMO_NSEC, 1, 0, 0 },
{ EVT_PROD_ETHDEV, 0, 0, 0 },
{ EVT_PROD_TIMERDEV, 0, 0, 0 },
{ EVT_PROD_TIMERDEV_BURST, 0, 0, 0 },
@@ -342,6 +354,7 @@ evt_opts_parse_long(int opt_idx, struct evt_options *opt)
{ EVT_SCHED_TYPE_LIST, evt_parse_sched_type_list},
{ EVT_FWD_LATENCY, evt_parse_fwd_latency},
{ EVT_QUEUE_PRIORITY, evt_parse_queue_priority},
+ { EVT_DEQ_TMO_NSEC, evt_parse_deq_tmo_nsec},
{ EVT_PROD_ETHDEV, evt_parse_eth_prod_type},
{ EVT_PROD_TIMERDEV, evt_parse_timer_prod_type},
{ EVT_PROD_TIMERDEV_BURST, evt_parse_timer_prod_type_burst},
diff --git a/app/test-eventdev/evt_options.h b/app/test-eventdev/evt_options.h
index f3de48a17..c486c4185 100644
--- a/app/test-eventdev/evt_options.h
+++ b/app/test-eventdev/evt_options.h
@@ -31,6 +31,7 @@
#define EVT_SCHED_TYPE_LIST ("stlist")
#define EVT_FWD_LATENCY ("fwd_latency")
#define EVT_QUEUE_PRIORITY ("queue_priority")
+#define EVT_DEQ_TMO_NSEC ("deq_tmo_nsec")
#define EVT_PROD_ETHDEV ("prod_type_ethdev")
#define EVT_PROD_TIMERDEV ("prod_type_timerdev")
#define EVT_PROD_TIMERDEV_BURST ("prod_type_timerdev_burst")
@@ -71,6 +72,7 @@ struct evt_options {
uint8_t dev_id;
uint32_t fwd_latency:1;
uint32_t q_priority:1;
+ uint32_t deq_tmo_nsec;
enum evt_prod_type prod_type;
uint8_t timdev_use_burst;
uint8_t timdev_cnt;
diff --git a/app/test-eventdev/test_order_atq.c b/app/test-eventdev/test_order_atq.c
index 4a8546e7f..94e51161a 100644
--- a/app/test-eventdev/test_order_atq.c
+++ b/app/test-eventdev/test_order_atq.c
@@ -119,6 +119,7 @@ order_atq_eventdev_setup(struct evt_test *test, struct evt_options *opt)
const uint8_t nb_ports = nb_workers + 1;
const struct rte_event_dev_config config = {
+ .dequeue_timeout_ns = opt->deq_tmo_nsec,
.nb_event_queues = NB_QUEUES,/* one all types queue */
.nb_event_ports = nb_ports,
.nb_events_limit = 4096,
diff --git a/app/test-eventdev/test_order_queue.c b/app/test-eventdev/test_order_queue.c
index a272c7a57..f643fc64a 100644
--- a/app/test-eventdev/test_order_queue.c
+++ b/app/test-eventdev/test_order_queue.c
@@ -119,6 +119,7 @@ order_queue_eventdev_setup(struct evt_test *test, struct evt_options *opt)
const uint8_t nb_ports = nb_workers + 1;
const struct rte_event_dev_config config = {
+ .dequeue_timeout_ns = opt->deq_tmo_nsec,
.nb_event_queues = NB_QUEUES,/* q0 ordered, q1 atomic */
.nb_event_ports = nb_ports,
.nb_events_limit = 4096,
diff --git a/app/test-eventdev/test_perf_atq.c b/app/test-eventdev/test_perf_atq.c
index 73f31e564..9cb1dd344 100644
--- a/app/test-eventdev/test_perf_atq.c
+++ b/app/test-eventdev/test_perf_atq.c
@@ -176,6 +176,7 @@ perf_atq_eventdev_setup(struct evt_test *test, struct evt_options *opt)
}
const struct rte_event_dev_config config = {
+ .dequeue_timeout_ns = opt->deq_tmo_nsec,
.nb_event_queues = nb_queues,
.nb_event_ports = nb_ports,
.nb_events_limit = dev_info.max_num_events,
diff --git a/app/test-eventdev/test_perf_queue.c b/app/test-eventdev/test_perf_queue.c
index d89491364..50cd51b07 100644
--- a/app/test-eventdev/test_perf_queue.c
+++ b/app/test-eventdev/test_perf_queue.c
@@ -177,6 +177,7 @@ perf_queue_eventdev_setup(struct evt_test *test, struct evt_options *opt)
}
const struct rte_event_dev_config config = {
+ .dequeue_timeout_ns = opt->deq_tmo_nsec,
.nb_event_queues = nb_queues,
.nb_event_ports = nb_ports,
.nb_events_limit = dev_info.max_num_events,
diff --git a/app/test-eventdev/test_pipeline_atq.c b/app/test-eventdev/test_pipeline_atq.c
index 998a56cfd..0b7f92f95 100644
--- a/app/test-eventdev/test_pipeline_atq.c
+++ b/app/test-eventdev/test_pipeline_atq.c
@@ -315,6 +315,7 @@ pipeline_atq_eventdev_setup(struct evt_test *test, struct evt_options *opt)
rte_event_dev_info_get(opt->dev_id, &info);
const struct rte_event_dev_config config = {
+ .dequeue_timeout_ns = opt->deq_tmo_nsec,
.nb_event_queues = nb_queues,
.nb_event_ports = nb_ports,
.nb_events_limit = info.max_num_events,
diff --git a/app/test-eventdev/test_pipeline_queue.c b/app/test-eventdev/test_pipeline_queue.c
index 7da89dad5..31f3dbad9 100644
--- a/app/test-eventdev/test_pipeline_queue.c
+++ b/app/test-eventdev/test_pipeline_queue.c
@@ -335,6 +335,7 @@ pipeline_queue_eventdev_setup(struct evt_test *test, struct evt_options *opt)
rte_event_dev_info_get(opt->dev_id, &info);
const struct rte_event_dev_config config = {
+ .dequeue_timeout_ns = opt->deq_tmo_nsec,
.nb_event_queues = nb_queues,
.nb_event_ports = nb_ports,
.nb_events_limit = info.max_num_events,
--
2.21.0
next reply other threads:[~2019-03-19 6:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-19 6:21 Pavan Nikhilesh Bhagavatula [this message]
2019-03-19 6:21 ` Pavan Nikhilesh Bhagavatula
2019-03-19 9:45 ` Jerin Jacob Kollanukkaran
2019-03-19 9:45 ` Jerin Jacob Kollanukkaran
2019-03-25 9:47 ` Pavan Nikhilesh Bhagavatula
2019-03-25 9:47 ` Pavan Nikhilesh Bhagavatula
2019-03-27 17:07 ` [dpdk-dev] [PATCH v2] " Pavan Nikhilesh Bhagavatula
2019-03-27 17:07 ` Pavan Nikhilesh Bhagavatula
2019-03-28 5:26 ` Jerin Jacob Kollanukkaran
2019-03-28 5:26 ` Jerin Jacob Kollanukkaran
2019-03-28 13:16 ` Pavan Nikhilesh Bhagavatula
2019-03-28 13:16 ` Pavan Nikhilesh Bhagavatula
2019-03-29 7:11 ` [dpdk-dev] [PATCH v3] " Pavan Nikhilesh Bhagavatula
2019-03-29 7:11 ` Pavan Nikhilesh Bhagavatula
2019-03-31 11:31 ` Jerin Jacob Kollanukkaran
2019-03-31 11:31 ` Jerin Jacob Kollanukkaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190319061845.12343-1-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).