From: Yongseok Koh <yskoh@mellanox.com>
To: shahafs@mellanox.com
Cc: dev@dpdk.org, stable@dpdk.org
Subject: [dpdk-dev] [PATCH v2 2/6] net/mlx5: fix external memory registration
Date: Mon, 25 Mar 2019 12:22:34 -0700 [thread overview]
Message-ID: <20190325192238.20940-3-yskoh@mellanox.com> (raw)
Message-ID: <20190325192234.U5Ka_CpA61nMX1FPwueArUiV8xDjYUfQICUcQ1eS-BM@z> (raw)
In-Reply-To: <20190325192238.20940-1-yskoh@mellanox.com>
Secondary process is not allowed to register MR due to a restriction of
library and kernel driver.
Fixes: 7e43a32ee060 ("net/mlx5: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
---
doc/guides/nics/mlx5.rst | 5 +++++
drivers/net/mlx5/mlx5_mr.c | 10 ++++++++++
2 files changed, 15 insertions(+)
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 0200373008..cbe3fb4c33 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -86,6 +86,11 @@ Limitations
- Forked secondary process not supported.
- All mempools must be initialized before rte_eth_dev_start().
+ - External memory unregistered in EAL memseg list cannot be used for DMA
+ unless such memory has been registered by ``mlx5_mr_update_ext_mp()`` in
+ primary process and remapped to the same virtual address in secondary
+ process. If the external memory is registered by primary process but has
+ different virtual address in secondary process, unexpected error may happen.
- Flow pattern without any specific vlan will match for vlan packets as well:
diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c
index 8aaa87dd60..e255650add 100644
--- a/drivers/net/mlx5/mlx5_mr.c
+++ b/drivers/net/mlx5/mlx5_mr.c
@@ -1132,6 +1132,7 @@ mlx5_mr_update_ext_mp_cb(struct rte_mempool *mp, void *opaque,
struct mlx5_mr_cache entry;
uint32_t lkey;
+ assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
/* If already registered, it should return. */
rte_rwlock_read_lock(&priv->mr.rwlock);
lkey = mr_lookup_dev(dev, &entry, addr);
@@ -1233,6 +1234,15 @@ mlx5_tx_update_ext_mp(struct mlx5_txq_data *txq, uintptr_t addr,
struct mlx5_mr_ctrl *mr_ctrl = &txq->mr_ctrl;
struct mlx5_priv *priv = txq_ctrl->priv;
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+ DRV_LOG(WARNING,
+ "port %u using address (%p) from unregistered mempool"
+ " having externally allocated memory"
+ " in secondary process, please create mempool"
+ " prior to rte_eth_dev_start()",
+ PORT_ID(priv), (void *)addr);
+ return UINT32_MAX;
+ }
mlx5_mr_update_ext_mp(ETH_DEV(priv), mr_ctrl, mp);
return mlx5_tx_addr2mr_bh(txq, addr);
}
--
2.11.0
next prev parent reply other threads:[~2019-03-25 19:23 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-07 7:41 [dpdk-dev] [PATCH 0/6] net/mlx: enable secondary process to register DMA memory Yongseok Koh
2019-03-07 7:41 ` [dpdk-dev] [PATCH 1/6] net/mlx: remove debug messages on datapath Yongseok Koh
2019-03-07 7:41 ` [dpdk-dev] [PATCH 2/6] net/mlx5: fix external memory registration Yongseok Koh
2019-03-07 7:41 ` [dpdk-dev] [PATCH 3/6] net/mlx5: add control of excessive memory pinning by kernel Yongseok Koh
2019-03-07 7:41 ` [dpdk-dev] [PATCH 4/6] net/mlx5: enable secondary process to register DMA memory Yongseok Koh
2019-03-07 7:41 ` [dpdk-dev] [PATCH 5/6] net/mlx4: add control of excessive memory pinning by kernel Yongseok Koh
2019-03-07 7:41 ` [dpdk-dev] [PATCH 6/6] net/mlx4: enable secondary process to register DMA memory Yongseok Koh
2019-03-07 7:55 ` [dpdk-dev] [PATCH 0/6] net/mlx: " Yongseok Koh
2019-03-14 12:45 ` Shahaf Shuler
2019-03-14 12:45 ` Shahaf Shuler
2019-03-25 19:22 ` [dpdk-dev] [PATCH v2 " Yongseok Koh
2019-03-25 19:22 ` Yongseok Koh
2019-03-25 19:22 ` [dpdk-dev] [PATCH v2 1/6] net/mlx: remove debug messages on datapath Yongseok Koh
2019-03-25 19:22 ` Yongseok Koh
2019-03-25 19:22 ` Yongseok Koh [this message]
2019-03-25 19:22 ` [dpdk-dev] [PATCH v2 2/6] net/mlx5: fix external memory registration Yongseok Koh
2019-03-25 19:22 ` [dpdk-dev] [PATCH v2 3/6] net/mlx5: add control of excessive memory pinning by kernel Yongseok Koh
2019-03-25 19:22 ` Yongseok Koh
2019-03-25 19:22 ` [dpdk-dev] [PATCH v2 4/6] net/mlx5: enable secondary process to register DMA memory Yongseok Koh
2019-03-25 19:22 ` Yongseok Koh
2019-03-25 19:22 ` [dpdk-dev] [PATCH v2 5/6] net/mlx4: add control of excessive memory pinning by kernel Yongseok Koh
2019-03-25 19:22 ` Yongseok Koh
2019-03-25 19:22 ` [dpdk-dev] [PATCH v2 6/6] net/mlx4: enable secondary process to register DMA memory Yongseok Koh
2019-03-25 19:22 ` Yongseok Koh
2019-04-01 21:17 ` [dpdk-dev] [PATCH v3 0/6] net/mlx: " Yongseok Koh
2019-04-01 21:17 ` Yongseok Koh
2019-04-01 21:17 ` [dpdk-dev] [PATCH v3 1/6] net/mlx: remove debug messages on datapath Yongseok Koh
2019-04-01 21:17 ` Yongseok Koh
2019-04-01 21:17 ` [dpdk-dev] [PATCH v3 2/6] net/mlx5: fix external memory registration Yongseok Koh
2019-04-01 21:17 ` Yongseok Koh
2019-04-01 21:17 ` [dpdk-dev] [PATCH v3 3/6] net/mlx5: add control of excessive memory pinning by kernel Yongseok Koh
2019-04-01 21:17 ` Yongseok Koh
2019-04-01 21:17 ` [dpdk-dev] [PATCH v3 4/6] net/mlx5: enable secondary process to register DMA memory Yongseok Koh
2019-04-01 21:17 ` Yongseok Koh
2019-04-01 21:17 ` [dpdk-dev] [PATCH v3 5/6] net/mlx4: add control of excessive memory pinning by kernel Yongseok Koh
2019-04-01 21:17 ` Yongseok Koh
2019-05-14 4:52 ` Stephen Hemminger
2019-05-14 4:52 ` Stephen Hemminger
2019-05-14 4:54 ` Stephen Hemminger
2019-05-14 4:54 ` Stephen Hemminger
2019-04-01 21:17 ` [dpdk-dev] [PATCH v3 6/6] net/mlx4: enable secondary process to register DMA memory Yongseok Koh
2019-04-01 21:17 ` Yongseok Koh
2019-04-02 7:13 ` [dpdk-dev] [PATCH v3 0/6] net/mlx: " Shahaf Shuler
2019-04-02 7:13 ` Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190325192238.20940-3-yskoh@mellanox.com \
--to=yskoh@mellanox.com \
--cc=dev@dpdk.org \
--cc=shahafs@mellanox.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).