[dpdk-dev] [PATCH] eal: initialize alarms early

[dpdk-dev] [PATCH] eal: initialize alarms early

[Darek Stojaczyk]

We currently initialize rte_alarms after starting
to listen for IPC hotplug requests, which gives
us a data race window. Upon receiving such hotplug
request we always try to set an alarm and this
obviously doesn't work if the alarms weren't
initialized yet.

To fix it, we initialize alarms before starting
to listen for IPC hotplug messages. Specifically,
we move rte_eal_alarm_init() right after
rte_eal_intr_init() as it makes some sense to
keep those two close to each other.

Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
Cc: Qi Zhang <qi.z.zhang@intel.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: stable@dpdk.org

Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
---
 lib/librte_eal/linux/eal/eal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/lib/librte_eal/linux/eal/eal.c b/lib/librte_eal/linux/eal/eal.c
index 13f401684..75ed0cf10 100644
--- a/lib/librte_eal/linux/eal/eal.c
+++ b/lib/librte_eal/linux/eal/eal.c
@@ -1005,6 +1005,12 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
+	if (rte_eal_alarm_init() < 0) {
+		rte_eal_init_alert("Cannot init interrupt-handling thread");
+		/* rte_eal_alarm_init sets rte_errno on failure. */
+		return -1;
+	}
+
 	/* Put mp channel init before bus scan so that we can init the vdev
 	 * bus through mp channel in the secondary process before the bus scan.
 	 */
@@ -1125,12 +1131,6 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
-	if (rte_eal_alarm_init() < 0) {
-		rte_eal_init_alert("Cannot init interrupt-handling thread");
-		/* rte_eal_alarm_init sets rte_errno on failure. */
-		return -1;
-	}
-
 	if (rte_eal_timer_init() < 0) {
 		rte_eal_init_alert("Cannot init HPET or TSC timers");
 		rte_errno = ENOTSUP;
-- 
2.17.1

[dpdk-dev] [PATCH] eal: initialize alarms early

[Darek Stojaczyk]

We currently initialize rte_alarms after starting
to listen for IPC hotplug requests, which gives
us a data race window. Upon receiving such hotplug
request we always try to set an alarm and this
obviously doesn't work if the alarms weren't
initialized yet.

To fix it, we initialize alarms before starting
to listen for IPC hotplug messages. Specifically,
we move rte_eal_alarm_init() right after
rte_eal_intr_init() as it makes some sense to
keep those two close to each other.

Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
Cc: Qi Zhang <qi.z.zhang@intel.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: stable@dpdk.org

Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
---
 lib/librte_eal/linux/eal/eal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/lib/librte_eal/linux/eal/eal.c b/lib/librte_eal/linux/eal/eal.c
index 13f401684..75ed0cf10 100644
--- a/lib/librte_eal/linux/eal/eal.c
+++ b/lib/librte_eal/linux/eal/eal.c
@@ -1005,6 +1005,12 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
+	if (rte_eal_alarm_init() < 0) {
+		rte_eal_init_alert("Cannot init interrupt-handling thread");
+		/* rte_eal_alarm_init sets rte_errno on failure. */
+		return -1;
+	}
+
 	/* Put mp channel init before bus scan so that we can init the vdev
 	 * bus through mp channel in the secondary process before the bus scan.
 	 */
@@ -1125,12 +1131,6 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
-	if (rte_eal_alarm_init() < 0) {
-		rte_eal_init_alert("Cannot init interrupt-handling thread");
-		/* rte_eal_alarm_init sets rte_errno on failure. */
-		return -1;
-	}
-
 	if (rte_eal_timer_init() < 0) {
 		rte_eal_init_alert("Cannot init HPET or TSC timers");
 		rte_errno = ENOTSUP;
-- 
2.17.1

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Thomas Monjalon]

26/03/2019 19:43, Darek Stojaczyk:
> We currently initialize rte_alarms after starting
> to listen for IPC hotplug requests, which gives
> us a data race window. Upon receiving such hotplug
> request we always try to set an alarm and this
> obviously doesn't work if the alarms weren't
> initialized yet.
> 
> To fix it, we initialize alarms before starting
> to listen for IPC hotplug messages. Specifically,
> we move rte_eal_alarm_init() right after
> rte_eal_intr_init() as it makes some sense to
> keep those two close to each other.

I wonder which regression it will bring :)
The experience shows that we cannot touch this function
without introducing a regression. Please check twice.

> Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> Cc: Qi Zhang <qi.z.zhang@intel.com>
> Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> Cc: stable@dpdk.org
> 
> Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> ---
>  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

You probably need to update the FreeBSD version too.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Thomas Monjalon]

26/03/2019 19:43, Darek Stojaczyk:
> We currently initialize rte_alarms after starting
> to listen for IPC hotplug requests, which gives
> us a data race window. Upon receiving such hotplug
> request we always try to set an alarm and this
> obviously doesn't work if the alarms weren't
> initialized yet.
> 
> To fix it, we initialize alarms before starting
> to listen for IPC hotplug messages. Specifically,
> we move rte_eal_alarm_init() right after
> rte_eal_intr_init() as it makes some sense to
> keep those two close to each other.

I wonder which regression it will bring :)
The experience shows that we cannot touch this function
without introducing a regression. Please check twice.

> Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> Cc: Qi Zhang <qi.z.zhang@intel.com>
> Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> Cc: stable@dpdk.org
> 
> Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> ---
>  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

You probably need to update the FreeBSD version too.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Stojaczyk, Dariusz]

> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas@monjalon.net]
> Sent: Wednesday, March 27, 2019 7:12 PM
> To: Stojaczyk, Dariusz <dariusz.stojaczyk@intel.com>
> Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Burakov, Anatoly
> <anatoly.burakov@intel.com>; stable@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] eal: initialize alarms early
> 
> 26/03/2019 19:43, Darek Stojaczyk:
> > We currently initialize rte_alarms after starting
> > to listen for IPC hotplug requests, which gives
> > us a data race window. Upon receiving such hotplug
> > request we always try to set an alarm and this
> > obviously doesn't work if the alarms weren't
> > initialized yet.
> >
> > To fix it, we initialize alarms before starting
> > to listen for IPC hotplug messages. Specifically,
> > we move rte_eal_alarm_init() right after
> > rte_eal_intr_init() as it makes some sense to
> > keep those two close to each other.
> 
> I wonder which regression it will bring :)
> The experience shows that we cannot touch this function
> without introducing a regression. Please check twice.

Hah, ok - I'll check again the possible outcomes of this.

> 
> > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > ---
> >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> You probably need to update the FreeBSD version too.
> 

Oh, that I cannot do. First of all, in bsd code I don't see
rte_mp_dev_hotplug_init() called anywhere, as if bsd
did not listen for IPC hotplug messages at all and hence did
not have any data race in this area. Second, I would be
afraid to touch any bsd code as I'm not running any bsd
system.

D.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Stojaczyk, Dariusz]

> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas@monjalon.net]
> Sent: Wednesday, March 27, 2019 7:12 PM
> To: Stojaczyk, Dariusz <dariusz.stojaczyk@intel.com>
> Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Burakov, Anatoly
> <anatoly.burakov@intel.com>; stable@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] eal: initialize alarms early
> 
> 26/03/2019 19:43, Darek Stojaczyk:
> > We currently initialize rte_alarms after starting
> > to listen for IPC hotplug requests, which gives
> > us a data race window. Upon receiving such hotplug
> > request we always try to set an alarm and this
> > obviously doesn't work if the alarms weren't
> > initialized yet.
> >
> > To fix it, we initialize alarms before starting
> > to listen for IPC hotplug messages. Specifically,
> > we move rte_eal_alarm_init() right after
> > rte_eal_intr_init() as it makes some sense to
> > keep those two close to each other.
> 
> I wonder which regression it will bring :)
> The experience shows that we cannot touch this function
> without introducing a regression. Please check twice.

Hah, ok - I'll check again the possible outcomes of this.

> 
> > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > ---
> >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> You probably need to update the FreeBSD version too.
> 

Oh, that I cannot do. First of all, in bsd code I don't see
rte_mp_dev_hotplug_init() called anywhere, as if bsd
did not listen for IPC hotplug messages at all and hence did
not have any data race in this area. Second, I would be
afraid to touch any bsd code as I'm not running any bsd
system.

D.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Thomas Monjalon]

27/03/2019 21:33, Stojaczyk, Dariusz:
> From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > 26/03/2019 19:43, Darek Stojaczyk:
> > > We currently initialize rte_alarms after starting
> > > to listen for IPC hotplug requests, which gives
> > > us a data race window. Upon receiving such hotplug
> > > request we always try to set an alarm and this
> > > obviously doesn't work if the alarms weren't
> > > initialized yet.
> > >
> > > To fix it, we initialize alarms before starting
> > > to listen for IPC hotplug messages. Specifically,
> > > we move rte_eal_alarm_init() right after
> > > rte_eal_intr_init() as it makes some sense to
> > > keep those two close to each other.
> > 
> > I wonder which regression it will bring :)
> > The experience shows that we cannot touch this function
> > without introducing a regression. Please check twice.
> 
> Hah, ok - I'll check again the possible outcomes of this.
> 
> > 
> > > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > > ---
> > >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> > >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > You probably need to update the FreeBSD version too.
> > 
> 
> Oh, that I cannot do. First of all, in bsd code I don't see
> rte_mp_dev_hotplug_init() called anywhere, as if bsd
> did not listen for IPC hotplug messages at all and hence did
> not have any data race in this area. Second, I would be
> afraid to touch any bsd code as I'm not running any bsd
> system.

The problem is the consistency between OSes.
May you ask help here? Bruce is maintaining the FreeBSD side.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Thomas Monjalon]

27/03/2019 21:33, Stojaczyk, Dariusz:
> From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > 26/03/2019 19:43, Darek Stojaczyk:
> > > We currently initialize rte_alarms after starting
> > > to listen for IPC hotplug requests, which gives
> > > us a data race window. Upon receiving such hotplug
> > > request we always try to set an alarm and this
> > > obviously doesn't work if the alarms weren't
> > > initialized yet.
> > >
> > > To fix it, we initialize alarms before starting
> > > to listen for IPC hotplug messages. Specifically,
> > > we move rte_eal_alarm_init() right after
> > > rte_eal_intr_init() as it makes some sense to
> > > keep those two close to each other.
> > 
> > I wonder which regression it will bring :)
> > The experience shows that we cannot touch this function
> > without introducing a regression. Please check twice.
> 
> Hah, ok - I'll check again the possible outcomes of this.
> 
> > 
> > > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > > ---
> > >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> > >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > You probably need to update the FreeBSD version too.
> > 
> 
> Oh, that I cannot do. First of all, in bsd code I don't see
> rte_mp_dev_hotplug_init() called anywhere, as if bsd
> did not listen for IPC hotplug messages at all and hence did
> not have any data race in this area. Second, I would be
> afraid to touch any bsd code as I'm not running any bsd
> system.

The problem is the consistency between OSes.
May you ask help here? Bruce is maintaining the FreeBSD side.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Bruce Richardson]

On Wed, Mar 27, 2019 at 11:42:40PM +0100, Thomas Monjalon wrote:
> 27/03/2019 21:33, Stojaczyk, Dariusz:
> > From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > > 26/03/2019 19:43, Darek Stojaczyk:
> > > > We currently initialize rte_alarms after starting
> > > > to listen for IPC hotplug requests, which gives
> > > > us a data race window. Upon receiving such hotplug
> > > > request we always try to set an alarm and this
> > > > obviously doesn't work if the alarms weren't
> > > > initialized yet.
> > > >
> > > > To fix it, we initialize alarms before starting
> > > > to listen for IPC hotplug messages. Specifically,
> > > > we move rte_eal_alarm_init() right after
> > > > rte_eal_intr_init() as it makes some sense to
> > > > keep those two close to each other.
> > > 
> > > I wonder which regression it will bring :)
> > > The experience shows that we cannot touch this function
> > > without introducing a regression. Please check twice.
> > 
> > Hah, ok - I'll check again the possible outcomes of this.
> > 
> > > 
> > > > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > > > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > > > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > > > Cc: stable@dpdk.org
> > > >
> > > > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > > > ---
> > > >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> > > >  1 file changed, 6 insertions(+), 6 deletions(-)
> > > 
> > > You probably need to update the FreeBSD version too.
> > > 
> > 
> > Oh, that I cannot do. First of all, in bsd code I don't see
> > rte_mp_dev_hotplug_init() called anywhere, as if bsd
> > did not listen for IPC hotplug messages at all and hence did
> > not have any data race in this area. Second, I would be
> > afraid to touch any bsd code as I'm not running any bsd
> > system.
> 
> The problem is the consistency between OSes.
> May you ask help here? Bruce is maintaining the FreeBSD side.
> 
I don't think we support IPC or hotplug on BSD, so I don't think this patch
is relevant on the BSD side.

/Bruce

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Bruce Richardson]

On Wed, Mar 27, 2019 at 11:42:40PM +0100, Thomas Monjalon wrote:
> 27/03/2019 21:33, Stojaczyk, Dariusz:
> > From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > > 26/03/2019 19:43, Darek Stojaczyk:
> > > > We currently initialize rte_alarms after starting
> > > > to listen for IPC hotplug requests, which gives
> > > > us a data race window. Upon receiving such hotplug
> > > > request we always try to set an alarm and this
> > > > obviously doesn't work if the alarms weren't
> > > > initialized yet.
> > > >
> > > > To fix it, we initialize alarms before starting
> > > > to listen for IPC hotplug messages. Specifically,
> > > > we move rte_eal_alarm_init() right after
> > > > rte_eal_intr_init() as it makes some sense to
> > > > keep those two close to each other.
> > > 
> > > I wonder which regression it will bring :)
> > > The experience shows that we cannot touch this function
> > > without introducing a regression. Please check twice.
> > 
> > Hah, ok - I'll check again the possible outcomes of this.
> > 
> > > 
> > > > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > > > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > > > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > > > Cc: stable@dpdk.org
> > > >
> > > > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > > > ---
> > > >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> > > >  1 file changed, 6 insertions(+), 6 deletions(-)
> > > 
> > > You probably need to update the FreeBSD version too.
> > > 
> > 
> > Oh, that I cannot do. First of all, in bsd code I don't see
> > rte_mp_dev_hotplug_init() called anywhere, as if bsd
> > did not listen for IPC hotplug messages at all and hence did
> > not have any data race in this area. Second, I would be
> > afraid to touch any bsd code as I'm not running any bsd
> > system.
> 
> The problem is the consistency between OSes.
> May you ask help here? Bruce is maintaining the FreeBSD side.
> 
I don't think we support IPC or hotplug on BSD, so I don't think this patch
is relevant on the BSD side.

/Bruce

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Thomas Monjalon]

28/03/2019 11:43, Bruce Richardson:
> On Wed, Mar 27, 2019 at 11:42:40PM +0100, Thomas Monjalon wrote:
> > 27/03/2019 21:33, Stojaczyk, Dariusz:
> > > From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > > > 26/03/2019 19:43, Darek Stojaczyk:
> > > > > We currently initialize rte_alarms after starting
> > > > > to listen for IPC hotplug requests, which gives
> > > > > us a data race window. Upon receiving such hotplug
> > > > > request we always try to set an alarm and this
> > > > > obviously doesn't work if the alarms weren't
> > > > > initialized yet.
> > > > >
> > > > > To fix it, we initialize alarms before starting
> > > > > to listen for IPC hotplug messages. Specifically,
> > > > > we move rte_eal_alarm_init() right after
> > > > > rte_eal_intr_init() as it makes some sense to
> > > > > keep those two close to each other.
> > > > 
> > > > I wonder which regression it will bring :)
> > > > The experience shows that we cannot touch this function
> > > > without introducing a regression. Please check twice.
> > > 
> > > Hah, ok - I'll check again the possible outcomes of this.
> > > 
> > > > 
> > > > > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > > > > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > > > > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > > > > Cc: stable@dpdk.org
> > > > >
> > > > > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > > > > ---
> > > > >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> > > > >  1 file changed, 6 insertions(+), 6 deletions(-)
> > > > 
> > > > You probably need to update the FreeBSD version too.
> > > > 
> > > 
> > > Oh, that I cannot do. First of all, in bsd code I don't see
> > > rte_mp_dev_hotplug_init() called anywhere, as if bsd
> > > did not listen for IPC hotplug messages at all and hence did
> > > not have any data race in this area. Second, I would be
> > > afraid to touch any bsd code as I'm not running any bsd
> > > system.
> > 
> > The problem is the consistency between OSes.
> > May you ask help here? Bruce is maintaining the FreeBSD side.
> > 
> I don't think we support IPC or hotplug on BSD, so I don't think this patch
> is relevant on the BSD side.

Yes, but then, the initialization order is different on Linux and BSD.
I'm thinking about consistency and maintenance ease.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Thomas Monjalon]

28/03/2019 11:43, Bruce Richardson:
> On Wed, Mar 27, 2019 at 11:42:40PM +0100, Thomas Monjalon wrote:
> > 27/03/2019 21:33, Stojaczyk, Dariusz:
> > > From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > > > 26/03/2019 19:43, Darek Stojaczyk:
> > > > > We currently initialize rte_alarms after starting
> > > > > to listen for IPC hotplug requests, which gives
> > > > > us a data race window. Upon receiving such hotplug
> > > > > request we always try to set an alarm and this
> > > > > obviously doesn't work if the alarms weren't
> > > > > initialized yet.
> > > > >
> > > > > To fix it, we initialize alarms before starting
> > > > > to listen for IPC hotplug messages. Specifically,
> > > > > we move rte_eal_alarm_init() right after
> > > > > rte_eal_intr_init() as it makes some sense to
> > > > > keep those two close to each other.
> > > > 
> > > > I wonder which regression it will bring :)
> > > > The experience shows that we cannot touch this function
> > > > without introducing a regression. Please check twice.
> > > 
> > > Hah, ok - I'll check again the possible outcomes of this.
> > > 
> > > > 
> > > > > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > > > > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > > > > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > > > > Cc: stable@dpdk.org
> > > > >
> > > > > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > > > > ---
> > > > >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> > > > >  1 file changed, 6 insertions(+), 6 deletions(-)
> > > > 
> > > > You probably need to update the FreeBSD version too.
> > > > 
> > > 
> > > Oh, that I cannot do. First of all, in bsd code I don't see
> > > rte_mp_dev_hotplug_init() called anywhere, as if bsd
> > > did not listen for IPC hotplug messages at all and hence did
> > > not have any data race in this area. Second, I would be
> > > afraid to touch any bsd code as I'm not running any bsd
> > > system.
> > 
> > The problem is the consistency between OSes.
> > May you ask help here? Bruce is maintaining the FreeBSD side.
> > 
> I don't think we support IPC or hotplug on BSD, so I don't think this patch
> is relevant on the BSD side.

Yes, but then, the initialization order is different on Linux and BSD.
I'm thinking about consistency and maintenance ease.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Burakov, Anatoly]

On 28-Mar-19 10:46 AM, Thomas Monjalon wrote:
> 28/03/2019 11:43, Bruce Richardson:
>> On Wed, Mar 27, 2019 at 11:42:40PM +0100, Thomas Monjalon wrote:
>>> 27/03/2019 21:33, Stojaczyk, Dariusz:
>>>> From: Thomas Monjalon [mailto:thomas@monjalon.net]
>>>>> 26/03/2019 19:43, Darek Stojaczyk:
>>>>>> We currently initialize rte_alarms after starting
>>>>>> to listen for IPC hotplug requests, which gives
>>>>>> us a data race window. Upon receiving such hotplug
>>>>>> request we always try to set an alarm and this
>>>>>> obviously doesn't work if the alarms weren't
>>>>>> initialized yet.
>>>>>>
>>>>>> To fix it, we initialize alarms before starting
>>>>>> to listen for IPC hotplug messages. Specifically,
>>>>>> we move rte_eal_alarm_init() right after
>>>>>> rte_eal_intr_init() as it makes some sense to
>>>>>> keep those two close to each other.
>>>>>
>>>>> I wonder which regression it will bring :)
>>>>> The experience shows that we cannot touch this function
>>>>> without introducing a regression. Please check twice.
>>>>
>>>> Hah, ok - I'll check again the possible outcomes of this.
>>>>
>>>>>
>>>>>> Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
>>>>>> Cc: Qi Zhang <qi.z.zhang@intel.com>
>>>>>> Cc: Anatoly Burakov <anatoly.burakov@intel.com>
>>>>>> Cc: stable@dpdk.org
>>>>>>
>>>>>> Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
>>>>>> ---
>>>>>>   lib/librte_eal/linux/eal/eal.c | 12 ++++++------
>>>>>>   1 file changed, 6 insertions(+), 6 deletions(-)
>>>>>
>>>>> You probably need to update the FreeBSD version too.
>>>>>
>>>>
>>>> Oh, that I cannot do. First of all, in bsd code I don't see
>>>> rte_mp_dev_hotplug_init() called anywhere, as if bsd
>>>> did not listen for IPC hotplug messages at all and hence did
>>>> not have any data race in this area. Second, I would be
>>>> afraid to touch any bsd code as I'm not running any bsd
>>>> system.
>>>
>>> The problem is the consistency between OSes.
>>> May you ask help here? Bruce is maintaining the FreeBSD side.
>>>
>> I don't think we support IPC or hotplug on BSD, so I don't think this patch
>> is relevant on the BSD side.
> 
> Yes, but then, the initialization order is different on Linux and BSD.
> I'm thinking about consistency and maintenance ease.
> 

 From my cursory inspection, nothing should be broken on FreeBSD as a 
result of moving alarm API init earlier.

-- 
Thanks,
Anatoly

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Burakov, Anatoly]

On 28-Mar-19 10:46 AM, Thomas Monjalon wrote:
> 28/03/2019 11:43, Bruce Richardson:
>> On Wed, Mar 27, 2019 at 11:42:40PM +0100, Thomas Monjalon wrote:
>>> 27/03/2019 21:33, Stojaczyk, Dariusz:
>>>> From: Thomas Monjalon [mailto:thomas@monjalon.net]
>>>>> 26/03/2019 19:43, Darek Stojaczyk:
>>>>>> We currently initialize rte_alarms after starting
>>>>>> to listen for IPC hotplug requests, which gives
>>>>>> us a data race window. Upon receiving such hotplug
>>>>>> request we always try to set an alarm and this
>>>>>> obviously doesn't work if the alarms weren't
>>>>>> initialized yet.
>>>>>>
>>>>>> To fix it, we initialize alarms before starting
>>>>>> to listen for IPC hotplug messages. Specifically,
>>>>>> we move rte_eal_alarm_init() right after
>>>>>> rte_eal_intr_init() as it makes some sense to
>>>>>> keep those two close to each other.
>>>>>
>>>>> I wonder which regression it will bring :)
>>>>> The experience shows that we cannot touch this function
>>>>> without introducing a regression. Please check twice.
>>>>
>>>> Hah, ok - I'll check again the possible outcomes of this.
>>>>
>>>>>
>>>>>> Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
>>>>>> Cc: Qi Zhang <qi.z.zhang@intel.com>
>>>>>> Cc: Anatoly Burakov <anatoly.burakov@intel.com>
>>>>>> Cc: stable@dpdk.org
>>>>>>
>>>>>> Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
>>>>>> ---
>>>>>>   lib/librte_eal/linux/eal/eal.c | 12 ++++++------
>>>>>>   1 file changed, 6 insertions(+), 6 deletions(-)
>>>>>
>>>>> You probably need to update the FreeBSD version too.
>>>>>
>>>>
>>>> Oh, that I cannot do. First of all, in bsd code I don't see
>>>> rte_mp_dev_hotplug_init() called anywhere, as if bsd
>>>> did not listen for IPC hotplug messages at all and hence did
>>>> not have any data race in this area. Second, I would be
>>>> afraid to touch any bsd code as I'm not running any bsd
>>>> system.
>>>
>>> The problem is the consistency between OSes.
>>> May you ask help here? Bruce is maintaining the FreeBSD side.
>>>
>> I don't think we support IPC or hotplug on BSD, so I don't think this patch
>> is relevant on the BSD side.
> 
> Yes, but then, the initialization order is different on Linux and BSD.
> I'm thinking about consistency and maintenance ease.
> 

 From my cursory inspection, nothing should be broken on FreeBSD as a 
result of moving alarm API init earlier.

-- 
Thanks,
Anatoly

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Stojaczyk, Dariusz]

> -----Original Message-----
> From: Stojaczyk, Dariusz
> Sent: Wednesday, March 27, 2019 9:34 PM
> To: Thomas Monjalon <thomas@monjalon.net>
> Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Burakov, Anatoly
> <anatoly.burakov@intel.com>; stable@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH] eal: initialize alarms early
> 
> 
> 
> > -----Original Message-----
> > From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > Sent: Wednesday, March 27, 2019 7:12 PM
> > To: Stojaczyk, Dariusz <dariusz.stojaczyk@intel.com>
> > Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Burakov, Anatoly
> > <anatoly.burakov@intel.com>; stable@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH] eal: initialize alarms early
> >
> > 26/03/2019 19:43, Darek Stojaczyk:
> > > We currently initialize rte_alarms after starting
> > > to listen for IPC hotplug requests, which gives
> > > us a data race window. Upon receiving such hotplug
> > > request we always try to set an alarm and this
> > > obviously doesn't work if the alarms weren't
> > > initialized yet.
> > >
> > > To fix it, we initialize alarms before starting
> > > to listen for IPC hotplug messages. Specifically,
> > > we move rte_eal_alarm_init() right after
> > > rte_eal_intr_init() as it makes some sense to
> > > keep those two close to each other.
> >
> > I wonder which regression it will bring :)
> > The experience shows that we cannot touch this function
> > without introducing a regression. Please check twice.
> 
> Hah, ok - I'll check again the possible outcomes of this.
> 

Done, I can't see any case I could break.

> >
> > > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > > ---
> > >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> > >  1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > You probably need to update the FreeBSD version too.
> >
> 
> Oh, that I cannot do. First of all, in bsd code I don't see
> rte_mp_dev_hotplug_init() called anywhere, as if bsd
> did not listen for IPC hotplug messages at all and hence did
> not have any data race in this area. Second, I would be
> afraid to touch any bsd code as I'm not running any bsd
> system.

Basing on Anatoly's feedback, I pushed a v2 with bsd changes
included as well.

Thanks!
D.

> 
> D.

Re: [dpdk-dev] [PATCH] eal: initialize alarms early

[Stojaczyk, Dariusz]

> -----Original Message-----
> From: Stojaczyk, Dariusz
> Sent: Wednesday, March 27, 2019 9:34 PM
> To: Thomas Monjalon <thomas@monjalon.net>
> Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Burakov, Anatoly
> <anatoly.burakov@intel.com>; stable@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH] eal: initialize alarms early
> 
> 
> 
> > -----Original Message-----
> > From: Thomas Monjalon [mailto:thomas@monjalon.net]
> > Sent: Wednesday, March 27, 2019 7:12 PM
> > To: Stojaczyk, Dariusz <dariusz.stojaczyk@intel.com>
> > Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Burakov, Anatoly
> > <anatoly.burakov@intel.com>; stable@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH] eal: initialize alarms early
> >
> > 26/03/2019 19:43, Darek Stojaczyk:
> > > We currently initialize rte_alarms after starting
> > > to listen for IPC hotplug requests, which gives
> > > us a data race window. Upon receiving such hotplug
> > > request we always try to set an alarm and this
> > > obviously doesn't work if the alarms weren't
> > > initialized yet.
> > >
> > > To fix it, we initialize alarms before starting
> > > to listen for IPC hotplug messages. Specifically,
> > > we move rte_eal_alarm_init() right after
> > > rte_eal_intr_init() as it makes some sense to
> > > keep those two close to each other.
> >
> > I wonder which regression it will bring :)
> > The experience shows that we cannot touch this function
> > without introducing a regression. Please check twice.
> 
> Hah, ok - I'll check again the possible outcomes of this.
> 

Done, I can't see any case I could break.

> >
> > > Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> > > Cc: Qi Zhang <qi.z.zhang@intel.com>
> > > Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> > > Cc: stable@dpdk.org
> > >
> > > Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> > > ---
> > >  lib/librte_eal/linux/eal/eal.c | 12 ++++++------
> > >  1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > You probably need to update the FreeBSD version too.
> >
> 
> Oh, that I cannot do. First of all, in bsd code I don't see
> rte_mp_dev_hotplug_init() called anywhere, as if bsd
> did not listen for IPC hotplug messages at all and hence did
> not have any data race in this area. Second, I would be
> afraid to touch any bsd code as I'm not running any bsd
> system.

Basing on Anatoly's feedback, I pushed a v2 with bsd changes
included as well.

Thanks!
D.

> 
> D.

[dpdk-dev] [PATCH v2] eal: initialize alarms early

[Darek Stojaczyk]

On linux, we currently initialize rte_alarms after
starting to listen for IPC hotplug requests, which gives
us a data race window. Upon receiving such hotplug
request we always try to set an alarm and this obviously
doesn't work if the alarms weren't initialized yet.

To fix it, we initialize alarms before starting to
listen for IPC hotplug messages. Specifically, we move
rte_eal_alarm_init() right after rte_eal_intr_init() as
it makes some sense to keep those two close to each other.

We update the bsd code as well to keep the initialization
order the same in both eal implementations.

Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
Cc: Qi Zhang <qi.z.zhang@intel.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: stable@dpdk.org

Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
---
v2:
 - updated the bsd code as well (Thomas)


 lib/librte_eal/freebsd/eal/eal.c | 12 ++++++------
 lib/librte_eal/linux/eal/eal.c   | 12 ++++++------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/lib/librte_eal/freebsd/eal/eal.c b/lib/librte_eal/freebsd/eal/eal.c
index 4e86b10b1..790c6afa7 100644
--- a/lib/librte_eal/freebsd/eal/eal.c
+++ b/lib/librte_eal/freebsd/eal/eal.c
@@ -662,6 +662,12 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
+	if (rte_eal_alarm_init() < 0) {
+		rte_eal_init_alert("Cannot init interrupt-handling thread");
+		/* rte_eal_alarm_init sets rte_errno on failure. */
+		return -1;
+	}
+
 	/* Put mp channel init before bus scan so that we can init the vdev
 	 * bus through mp channel in the secondary process before the bus scan.
 	 */
@@ -751,12 +757,6 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
-	if (rte_eal_alarm_init() < 0) {
-		rte_eal_init_alert("Cannot init interrupt-handling thread");
-		/* rte_eal_alarm_init sets rte_errno on failure. */
-		return -1;
-	}
-
 	if (rte_eal_timer_init() < 0) {
 		rte_eal_init_alert("Cannot init HPET or TSC timers");
 		rte_errno = ENOTSUP;
diff --git a/lib/librte_eal/linux/eal/eal.c b/lib/librte_eal/linux/eal/eal.c
index 13f401684..75ed0cf10 100644
--- a/lib/librte_eal/linux/eal/eal.c
+++ b/lib/librte_eal/linux/eal/eal.c
@@ -1005,6 +1005,12 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
+	if (rte_eal_alarm_init() < 0) {
+		rte_eal_init_alert("Cannot init interrupt-handling thread");
+		/* rte_eal_alarm_init sets rte_errno on failure. */
+		return -1;
+	}
+
 	/* Put mp channel init before bus scan so that we can init the vdev
 	 * bus through mp channel in the secondary process before the bus scan.
 	 */
@@ -1125,12 +1131,6 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
-	if (rte_eal_alarm_init() < 0) {
-		rte_eal_init_alert("Cannot init interrupt-handling thread");
-		/* rte_eal_alarm_init sets rte_errno on failure. */
-		return -1;
-	}
-
 	if (rte_eal_timer_init() < 0) {
 		rte_eal_init_alert("Cannot init HPET or TSC timers");
 		rte_errno = ENOTSUP;
-- 
2.17.1

[dpdk-dev] [PATCH v2] eal: initialize alarms early

[Darek Stojaczyk]

On linux, we currently initialize rte_alarms after
starting to listen for IPC hotplug requests, which gives
us a data race window. Upon receiving such hotplug
request we always try to set an alarm and this obviously
doesn't work if the alarms weren't initialized yet.

To fix it, we initialize alarms before starting to
listen for IPC hotplug messages. Specifically, we move
rte_eal_alarm_init() right after rte_eal_intr_init() as
it makes some sense to keep those two close to each other.

We update the bsd code as well to keep the initialization
order the same in both eal implementations.

Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
Cc: Qi Zhang <qi.z.zhang@intel.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: stable@dpdk.org

Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
---
v2:
 - updated the bsd code as well (Thomas)


 lib/librte_eal/freebsd/eal/eal.c | 12 ++++++------
 lib/librte_eal/linux/eal/eal.c   | 12 ++++++------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/lib/librte_eal/freebsd/eal/eal.c b/lib/librte_eal/freebsd/eal/eal.c
index 4e86b10b1..790c6afa7 100644
--- a/lib/librte_eal/freebsd/eal/eal.c
+++ b/lib/librte_eal/freebsd/eal/eal.c
@@ -662,6 +662,12 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
+	if (rte_eal_alarm_init() < 0) {
+		rte_eal_init_alert("Cannot init interrupt-handling thread");
+		/* rte_eal_alarm_init sets rte_errno on failure. */
+		return -1;
+	}
+
 	/* Put mp channel init before bus scan so that we can init the vdev
 	 * bus through mp channel in the secondary process before the bus scan.
 	 */
@@ -751,12 +757,6 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
-	if (rte_eal_alarm_init() < 0) {
-		rte_eal_init_alert("Cannot init interrupt-handling thread");
-		/* rte_eal_alarm_init sets rte_errno on failure. */
-		return -1;
-	}
-
 	if (rte_eal_timer_init() < 0) {
 		rte_eal_init_alert("Cannot init HPET or TSC timers");
 		rte_errno = ENOTSUP;
diff --git a/lib/librte_eal/linux/eal/eal.c b/lib/librte_eal/linux/eal/eal.c
index 13f401684..75ed0cf10 100644
--- a/lib/librte_eal/linux/eal/eal.c
+++ b/lib/librte_eal/linux/eal/eal.c
@@ -1005,6 +1005,12 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
+	if (rte_eal_alarm_init() < 0) {
+		rte_eal_init_alert("Cannot init interrupt-handling thread");
+		/* rte_eal_alarm_init sets rte_errno on failure. */
+		return -1;
+	}
+
 	/* Put mp channel init before bus scan so that we can init the vdev
 	 * bus through mp channel in the secondary process before the bus scan.
 	 */
@@ -1125,12 +1131,6 @@ rte_eal_init(int argc, char **argv)
 		return -1;
 	}
 
-	if (rte_eal_alarm_init() < 0) {
-		rte_eal_init_alert("Cannot init interrupt-handling thread");
-		/* rte_eal_alarm_init sets rte_errno on failure. */
-		return -1;
-	}
-
 	if (rte_eal_timer_init() < 0) {
 		rte_eal_init_alert("Cannot init HPET or TSC timers");
 		rte_errno = ENOTSUP;
-- 
2.17.1

Re: [dpdk-dev] [dpdk-stable] [PATCH v2] eal: initialize alarms early

[Thomas Monjalon]

01/04/2019 16:18, Darek Stojaczyk:
> On linux, we currently initialize rte_alarms after
> starting to listen for IPC hotplug requests, which gives
> us a data race window. Upon receiving such hotplug
> request we always try to set an alarm and this obviously
> doesn't work if the alarms weren't initialized yet.
> 
> To fix it, we initialize alarms before starting to
> listen for IPC hotplug messages. Specifically, we move
> rte_eal_alarm_init() right after rte_eal_intr_init() as
> it makes some sense to keep those two close to each other.
> 
> We update the bsd code as well to keep the initialization
> order the same in both eal implementations.
> 
> Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> Cc: Qi Zhang <qi.z.zhang@intel.com>
> Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> Cc: stable@dpdk.org
> 
> Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> ---
> v2:
>  - updated the bsd code as well (Thomas)

Applied, thanks

Re: [dpdk-dev] [dpdk-stable] [PATCH v2] eal: initialize alarms early

[Thomas Monjalon]

01/04/2019 16:18, Darek Stojaczyk:
> On linux, we currently initialize rte_alarms after
> starting to listen for IPC hotplug requests, which gives
> us a data race window. Upon receiving such hotplug
> request we always try to set an alarm and this obviously
> doesn't work if the alarms weren't initialized yet.
> 
> To fix it, we initialize alarms before starting to
> listen for IPC hotplug messages. Specifically, we move
> rte_eal_alarm_init() right after rte_eal_intr_init() as
> it makes some sense to keep those two close to each other.
> 
> We update the bsd code as well to keep the initialization
> order the same in both eal implementations.
> 
> Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
> Cc: Qi Zhang <qi.z.zhang@intel.com>
> Cc: Anatoly Burakov <anatoly.burakov@intel.com>
> Cc: stable@dpdk.org
> 
> Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
> ---
> v2:
>  - updated the bsd code as well (Thomas)

Applied, thanks