From: Konstantin Ananyev <konstantin.ananyev@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, olivier.matz@6wind.com,
Konstantin Ananyev <konstantin.ananyev@intel.com>
Subject: [dpdk-dev] [PATCH v4 7/9] ipsec: reorder packet process for esp inbound
Date: Fri, 29 Mar 2019 10:27:24 +0000 [thread overview]
Message-ID: <20190329102726.27716-8-konstantin.ananyev@intel.com> (raw)
In-Reply-To: <20190329102726.27716-1-konstantin.ananyev@intel.com>
Change the order of operations for esp inbound post-process:
- read mbuf metadata and esp tail first for all packets in the burst
first to minimize stalls due to load latency.
- move code that is common for both transport and tunnel modes into
separate functions to reduce code duplication.
- add extra check for packet consitency
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
lib/librte_ipsec/esp_inb.c | 351 ++++++++++++++++++++++-------------
lib/librte_ipsec/ipsec_sqn.h | 4 -
2 files changed, 227 insertions(+), 128 deletions(-)
diff --git a/lib/librte_ipsec/esp_inb.c b/lib/librte_ipsec/esp_inb.c
index 8d1171556..138ed0450 100644
--- a/lib/librte_ipsec/esp_inb.c
+++ b/lib/librte_ipsec/esp_inb.c
@@ -15,8 +15,11 @@
#include "misc.h"
#include "pad.h"
+typedef uint16_t (*esp_inb_process_t)(const struct rte_ipsec_sa *sa,
+ struct rte_mbuf *mb[], uint32_t sqn[], uint32_t dr[], uint16_t num);
+
/*
- * setup crypto op and crypto sym op for ESP inbound tunnel packet.
+ * setup crypto op and crypto sym op for ESP inbound packet.
*/
static inline void
inb_cop_prepare(struct rte_crypto_op *cop,
@@ -216,111 +219,239 @@ esp_inb_pkt_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
}
/*
- * process ESP inbound tunnel packet.
+ * Start with processing inbound packet.
+ * This is common part for both tunnel and transport mode.
+ * Extract information that will be needed later from mbuf metadata and
+ * actual packet data:
+ * - mbuf for packet's last segment
+ * - length of the L2/L3 headers
+ * - esp tail structure
*/
-static inline int
-inb_tun_single_pkt_process(struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
- uint32_t *sqn)
+static inline void
+process_step1(struct rte_mbuf *mb, uint32_t tlen, struct rte_mbuf **ml,
+ struct esp_tail *espt, uint32_t *hlen)
{
- uint32_t hlen, icv_len, tlen;
- struct esp_hdr *esph;
- struct esp_tail *espt;
- struct rte_mbuf *ml;
- char *pd;
+ const struct esp_tail *pt;
- if (mb->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED)
- return -EBADMSG;
+ ml[0] = rte_pktmbuf_lastseg(mb);
+ hlen[0] = mb->l2_len + mb->l3_len;
+ pt = rte_pktmbuf_mtod_offset(ml[0], const struct esp_tail *,
+ ml[0]->data_len - tlen);
+ espt[0] = pt[0];
+}
- icv_len = sa->icv_len;
+/*
+ * packet checks for transport mode:
+ * - no reported IPsec related failures in ol_flags
+ * - tail length is valid
+ * - padding bytes are valid
+ */
+static inline int32_t
+trs_process_check(const struct rte_mbuf *mb, const struct rte_mbuf *ml,
+ struct esp_tail espt, uint32_t hlen, uint32_t tlen)
+{
+ const uint8_t *pd;
+ int32_t ofs;
- ml = rte_pktmbuf_lastseg(mb);
- espt = rte_pktmbuf_mtod_offset(ml, struct esp_tail *,
- ml->data_len - icv_len - sizeof(*espt));
+ ofs = ml->data_len - tlen;
+ pd = rte_pktmbuf_mtod_offset(ml, const uint8_t *, ofs);
- /*
- * check padding and next proto.
- * return an error if something is wrong.
- */
- pd = (char *)espt - espt->pad_len;
- if (espt->next_proto != sa->proto ||
- memcmp(pd, esp_pad_bytes, espt->pad_len))
- return -EINVAL;
+ return ((mb->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED) != 0 ||
+ ofs < 0 || tlen + hlen > mb->pkt_len ||
+ (espt.pad_len != 0 && memcmp(pd, esp_pad_bytes, espt.pad_len)));
+}
+
+/*
+ * packet checks for tunnel mode:
+ * - same as for trasnport mode
+ * - esp tail next proto contains expected for that SA value
+ */
+static inline int32_t
+tun_process_check(const struct rte_mbuf *mb, struct rte_mbuf *ml,
+ struct esp_tail espt, uint32_t hlen, const uint32_t tlen, uint8_t proto)
+{
+ return (trs_process_check(mb, ml, espt, hlen, tlen) ||
+ espt.next_proto != proto);
+}
+
+/*
+ * step two for tunnel mode:
+ * - read SQN value (for future use)
+ * - cut of ICV, ESP tail and padding bytes
+ * - cut of ESP header and IV, also if needed - L2/L3 headers
+ * (controlled by *adj* value)
+ */
+static inline void *
+tun_process_step2(struct rte_mbuf *mb, struct rte_mbuf *ml, uint32_t hlen,
+ uint32_t adj, uint32_t tlen, uint32_t *sqn)
+{
+ const struct esp_hdr *ph;
+
+ /* read SQN value */
+ ph = rte_pktmbuf_mtod_offset(mb, const struct esp_hdr *, hlen);
+ sqn[0] = ph->seq;
/* cut of ICV, ESP tail and padding bytes */
- tlen = icv_len + sizeof(*espt) + espt->pad_len;
ml->data_len -= tlen;
mb->pkt_len -= tlen;
/* cut of L2/L3 headers, ESP header and IV */
- hlen = mb->l2_len + mb->l3_len;
- esph = rte_pktmbuf_mtod_offset(mb, struct esp_hdr *, hlen);
- rte_pktmbuf_adj(mb, hlen + sa->ctp.cipher.offset);
+ return rte_pktmbuf_adj(mb, adj);
+}
+
+/*
+ * step two for transport mode:
+ * - read SQN value (for future use)
+ * - cut of ICV, ESP tail and padding bytes
+ * - cut of ESP header and IV
+ * - move L2/L3 header to fill the gap after ESP header removal
+ */
+static inline void *
+trs_process_step2(struct rte_mbuf *mb, struct rte_mbuf *ml, uint32_t hlen,
+ uint32_t adj, uint32_t tlen, uint32_t *sqn)
+{
+ char *np, *op;
+
+ /* get start of the packet before modifications */
+ op = rte_pktmbuf_mtod(mb, char *);
+
+ /* cut off ESP header and IV */
+ np = tun_process_step2(mb, ml, hlen, adj, tlen, sqn);
+
+ /* move header bytes to fill the gap after ESP header removal */
+ remove_esph(np, op, hlen);
+ return np;
+}
- /* retrieve SQN for later check */
- *sqn = rte_be_to_cpu_32(esph->seq);
+/*
+ * step three for transport mode:
+ * update mbuf metadata:
+ * - packet_type
+ * - ol_flags
+ */
+static inline void
+trs_process_step3(struct rte_mbuf *mb)
+{
+ /* reset mbuf packet type */
+ mb->packet_type &= (RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK);
+ /* clear the PKT_RX_SEC_OFFLOAD flag if set */
+ mb->ol_flags &= ~PKT_RX_SEC_OFFLOAD;
+}
+
+/*
+ * step three for tunnel mode:
+ * update mbuf metadata:
+ * - packet_type
+ * - ol_flags
+ * - tx_offload
+ */
+static inline void
+tun_process_step3(struct rte_mbuf *mb, uint64_t txof_msk, uint64_t txof_val)
+{
/* reset mbuf metatdata: L2/L3 len, packet type */
mb->packet_type = RTE_PTYPE_UNKNOWN;
- mb->tx_offload = (mb->tx_offload & sa->tx_offload.msk) |
- sa->tx_offload.val;
+ mb->tx_offload = (mb->tx_offload & txof_msk) | txof_val;
/* clear the PKT_RX_SEC_OFFLOAD flag if set */
- mb->ol_flags &= ~(mb->ol_flags & PKT_RX_SEC_OFFLOAD);
- return 0;
+ mb->ol_flags &= ~PKT_RX_SEC_OFFLOAD;
}
+
/*
- * process ESP inbound transport packet.
+ * *process* function for tunnel packets
*/
-static inline int
-inb_trs_single_pkt_process(struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
- uint32_t *sqn)
+static inline uint16_t
+tun_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
+ uint32_t sqn[], uint32_t dr[], uint16_t num)
{
- uint32_t hlen, icv_len, l2len, l3len, tlen;
- struct esp_hdr *esph;
- struct esp_tail *espt;
- struct rte_mbuf *ml;
- char *np, *op, *pd;
+ uint32_t adj, i, k, tl;
+ uint32_t hl[num];
+ struct esp_tail espt[num];
+ struct rte_mbuf *ml[num];
- if (mb->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED)
- return -EBADMSG;
+ const uint32_t tlen = sa->icv_len + sizeof(espt[0]);
+ const uint32_t cofs = sa->ctp.cipher.offset;
- icv_len = sa->icv_len;
+ /*
+ * to minimize stalls due to load latency,
+ * read mbufs metadata and esp tail first.
+ */
+ for (i = 0; i != num; i++)
+ process_step1(mb[i], tlen, &ml[i], &espt[i], &hl[i]);
- ml = rte_pktmbuf_lastseg(mb);
- espt = rte_pktmbuf_mtod_offset(ml, struct esp_tail *,
- ml->data_len - icv_len - sizeof(*espt));
+ k = 0;
+ for (i = 0; i != num; i++) {
- /* check padding, return an error if something is wrong. */
- pd = (char *)espt - espt->pad_len;
- if (memcmp(pd, esp_pad_bytes, espt->pad_len))
- return -EINVAL;
+ adj = hl[i] + cofs;
+ tl = tlen + espt[i].pad_len;
- /* cut of ICV, ESP tail and padding bytes */
- tlen = icv_len + sizeof(*espt) + espt->pad_len;
- ml->data_len -= tlen;
- mb->pkt_len -= tlen;
+ /* check that packet is valid */
+ if (tun_process_check(mb[i], ml[i], espt[i], adj, tl,
+ sa->proto) == 0) {
- /* retrieve SQN for later check */
- l2len = mb->l2_len;
- l3len = mb->l3_len;
- hlen = l2len + l3len;
- op = rte_pktmbuf_mtod(mb, char *);
- esph = (struct esp_hdr *)(op + hlen);
- *sqn = rte_be_to_cpu_32(esph->seq);
+ /* modify packet's layout */
+ tun_process_step2(mb[i], ml[i], hl[i], adj,
+ tl, sqn + k);
+ /* update mbuf's metadata */
+ tun_process_step3(mb[i], sa->tx_offload.msk,
+ sa->tx_offload.val);
+ k++;
+ } else
+ dr[i - k] = i;
+ }
- /* cut off ESP header and IV, update L3 header */
- np = rte_pktmbuf_adj(mb, sa->ctp.cipher.offset);
- remove_esph(np, op, hlen);
- update_trs_l3hdr(sa, np + l2len, mb->pkt_len, l2len, l3len,
- espt->next_proto);
+ return k;
+}
- /* reset mbuf packet type */
- mb->packet_type &= (RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK);
- /* clear the PKT_RX_SEC_OFFLOAD flag if set */
- mb->ol_flags &= ~(mb->ol_flags & PKT_RX_SEC_OFFLOAD);
- return 0;
+/*
+ * *process* function for tunnel packets
+ */
+static inline uint16_t
+trs_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
+ uint32_t sqn[], uint32_t dr[], uint16_t num)
+{
+ char *np;
+ uint32_t i, k, l2, tl;
+ uint32_t hl[num];
+ struct esp_tail espt[num];
+ struct rte_mbuf *ml[num];
+
+ const uint32_t tlen = sa->icv_len + sizeof(espt[0]);
+ const uint32_t cofs = sa->ctp.cipher.offset;
+
+ /*
+ * to minimize stalls due to load latency,
+ * read mbufs metadata and esp tail first.
+ */
+ for (i = 0; i != num; i++)
+ process_step1(mb[i], tlen, &ml[i], &espt[i], &hl[i]);
+
+ k = 0;
+ for (i = 0; i != num; i++) {
+
+ tl = tlen + espt[i].pad_len;
+ l2 = mb[i]->l2_len;
+
+ /* check that packet is valid */
+ if (trs_process_check(mb[i], ml[i], espt[i], hl[i] + cofs,
+ tl) == 0) {
+
+ /* modify packet's layout */
+ np = trs_process_step2(mb[i], ml[i], hl[i], cofs, tl,
+ sqn + k);
+ update_trs_l3hdr(sa, np + l2, mb[i]->pkt_len,
+ l2, hl[i] - l2, espt[i].next_proto);
+
+ /* update mbuf's metadata */
+ trs_process_step3(mb[i]);
+ k++;
+ } else
+ dr[i - k] = i;
+ }
+
+ return k;
}
/*
@@ -333,11 +464,15 @@ esp_inb_rsn_update(struct rte_ipsec_sa *sa, const uint32_t sqn[],
uint32_t i, k;
struct replay_sqn *rsn;
+ /* replay not enabled */
+ if (sa->replay.win_sz == 0)
+ return num;
+
rsn = rsn_update_start(sa);
k = 0;
for (i = 0; i != num; i++) {
- if (esn_inb_update_sqn(rsn, sa, sqn[i]) == 0)
+ if (esn_inb_update_sqn(rsn, sa, rte_be_to_cpu_32(sqn[i])) == 0)
k++;
else
dr[i - k] = i;
@@ -348,13 +483,13 @@ esp_inb_rsn_update(struct rte_ipsec_sa *sa, const uint32_t sqn[],
}
/*
- * process group of ESP inbound tunnel packets.
+ * process group of ESP inbound packets.
*/
-uint16_t
-esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
- struct rte_mbuf *mb[], uint16_t num)
+static inline uint16_t
+esp_inb_pkt_process(const struct rte_ipsec_session *ss,
+ struct rte_mbuf *mb[], uint16_t num, esp_inb_process_t process)
{
- uint32_t i, k, n;
+ uint32_t k, n;
struct rte_ipsec_sa *sa;
uint32_t sqn[num];
uint32_t dr[num];
@@ -362,16 +497,7 @@ esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
sa = ss->sa;
/* process packets, extract seq numbers */
-
- k = 0;
- for (i = 0; i != num; i++) {
- /* good packet */
- if (inb_tun_single_pkt_process(sa, mb[i], sqn + k) == 0)
- k++;
- /* bad packet, will drop from furhter processing */
- else
- dr[i - k] = i;
- }
+ k = process(sa, mb, sqn, dr, num);
/* handle unprocessed mbufs */
if (k != num && k != 0)
@@ -390,6 +516,16 @@ esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
return n;
}
+/*
+ * process group of ESP inbound tunnel packets.
+ */
+uint16_t
+esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
+ struct rte_mbuf *mb[], uint16_t num)
+{
+ return esp_inb_pkt_process(ss, mb, num, tun_process);
+}
+
/*
* process group of ESP inbound transport packets.
*/
@@ -397,38 +533,5 @@ uint16_t
esp_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num)
{
- uint32_t i, k, n;
- uint32_t sqn[num];
- struct rte_ipsec_sa *sa;
- uint32_t dr[num];
-
- sa = ss->sa;
-
- /* process packets, extract seq numbers */
-
- k = 0;
- for (i = 0; i != num; i++) {
- /* good packet */
- if (inb_trs_single_pkt_process(sa, mb[i], sqn + k) == 0)
- k++;
- /* bad packet, will drop from furhter processing */
- else
- dr[i - k] = i;
- }
-
- /* handle unprocessed mbufs */
- if (k != num && k != 0)
- move_bad_mbufs(mb, dr, num, num - k);
-
- /* update SQN and replay winow */
- n = esp_inb_rsn_update(sa, sqn, dr, k);
-
- /* handle mbufs with wrong SQN */
- if (n != k && n != 0)
- move_bad_mbufs(mb, dr, k, k - n);
-
- if (n != num)
- rte_errno = EBADMSG;
-
- return n;
+ return esp_inb_pkt_process(ss, mb, num, trs_process);
}
diff --git a/lib/librte_ipsec/ipsec_sqn.h b/lib/librte_ipsec/ipsec_sqn.h
index 4ba079d75..0c2f76a7a 100644
--- a/lib/librte_ipsec/ipsec_sqn.h
+++ b/lib/librte_ipsec/ipsec_sqn.h
@@ -152,10 +152,6 @@ esn_inb_update_sqn(struct replay_sqn *rsn, const struct rte_ipsec_sa *sa,
{
uint32_t bit, bucket, last_bucket, new_bucket, diff, i;
- /* replay not enabled */
- if (sa->replay.win_sz == 0)
- return 0;
-
/* handle ESN */
if (IS_ESN(sa))
sqn = reconstruct_esn(rsn->sqn, sqn, sa->replay.win_sz);
--
2.17.1
next prev parent reply other threads:[~2019-03-29 10:28 UTC|newest]
Thread overview: 163+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 19:20 [dpdk-dev] [PATCH 0/6] Few small improvements for ipsec library Konstantin Ananyev
2019-02-28 19:20 ` [dpdk-dev] [PATCH 1/6] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-02-28 19:20 ` [dpdk-dev] [PATCH 2/6] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-02-28 19:20 ` [dpdk-dev] [PATCH 3/6] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-02-28 19:20 ` [dpdk-dev] [PATCH 4/6] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-02-28 19:21 ` [dpdk-dev] [PATCH 5/6] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-02-28 19:21 ` [dpdk-dev] [PATCH 6/6] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 0/7] Few small improvements for ipsec library Konstantin Ananyev
2019-03-20 17:24 ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 1/7] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-03-20 17:24 ` Konstantin Ananyev
2019-03-20 17:53 ` Wiles, Keith
2019-03-20 17:53 ` Wiles, Keith
2019-03-22 17:37 ` Ananyev, Konstantin
2019-03-22 17:37 ` Ananyev, Konstantin
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 2/7] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-03-20 17:24 ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 3/7] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-03-20 17:24 ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 4/7] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-03-20 17:24 ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 5/7] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-03-20 17:24 ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 6/7] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-20 17:24 ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 7/7] ipsec: reorder packet process " Konstantin Ananyev
2019-03-20 17:24 ` Konstantin Ananyev
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 0/7] Few small improvements for ipsec library Konstantin Ananyev
2019-03-20 18:46 ` Konstantin Ananyev
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 1/7] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-03-20 18:46 ` Konstantin Ananyev
2019-03-21 3:33 ` Jerin Jacob Kollanukkaran
2019-03-21 3:33 ` Jerin Jacob Kollanukkaran
2019-03-21 6:04 ` Shahaf Shuler
2019-03-21 6:04 ` Shahaf Shuler
2019-03-21 13:51 ` Ananyev, Konstantin
2019-03-21 13:51 ` Ananyev, Konstantin
2019-03-24 8:00 ` Shahaf Shuler
2019-03-24 8:00 ` Shahaf Shuler
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 0/8] Few small improvements for ipsec library Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 1/8] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-28 8:16 ` Akhil Goyal
2019-03-28 8:16 ` Akhil Goyal
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 2/8] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-28 8:52 ` Akhil Goyal
2019-03-28 8:52 ` Akhil Goyal
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 3/8] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-28 9:02 ` Akhil Goyal
2019-03-28 9:02 ` Akhil Goyal
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 4/8] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-28 10:52 ` Akhil Goyal
2019-03-28 10:52 ` Akhil Goyal
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 5/8] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-28 11:20 ` Akhil Goyal
2019-03-28 11:20 ` Akhil Goyal
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 6/8] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-28 11:27 ` Akhil Goyal
2019-03-28 11:27 ` Akhil Goyal
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 7/8] ipsec: reorder packet process " Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-26 15:43 ` [dpdk-dev] [PATCH v3 8/8] ipsec: de-duplicate crypto op prepare code-path Konstantin Ananyev
2019-03-26 15:43 ` Konstantin Ananyev
2019-03-28 11:35 ` Akhil Goyal
2019-03-28 11:35 ` Akhil Goyal
2019-03-28 11:21 ` [dpdk-dev] [PATCH v3 0/8] Few small improvements for ipsec library Akhil Goyal
2019-03-28 11:21 ` Akhil Goyal
2019-03-28 11:49 ` Ananyev, Konstantin
2019-03-28 11:49 ` Ananyev, Konstantin
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 0/9] " Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 1/9] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 12:54 ` Olivier Matz
2019-03-29 12:54 ` Olivier Matz
2019-03-30 14:20 ` Ananyev, Konstantin
2019-03-30 14:20 ` Ananyev, Konstantin
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 2/9] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 3/9] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 4/9] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 5/9] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 6/9] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev [this message]
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 7/9] ipsec: reorder packet process " Konstantin Ananyev
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 8/9] ipsec: de-duplicate crypto op prepare code-path Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 10:27 ` [dpdk-dev] [PATCH v4 9/9] doc: add ipsec lib into shared libraries list Konstantin Ananyev
2019-03-29 10:27 ` Konstantin Ananyev
2019-03-29 16:03 ` Akhil Goyal
2019-03-29 16:03 ` Akhil Goyal
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 0/9] Few small improvements for ipsec library Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 1/9] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 13:18 ` Akhil Goyal
2019-04-01 13:18 ` Akhil Goyal
2019-04-01 13:22 ` Olivier Matz
2019-04-01 13:22 ` Olivier Matz
2019-04-01 13:55 ` Ananyev, Konstantin
2019-04-01 13:55 ` Ananyev, Konstantin
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 2/9] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 3/9] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 4/9] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 5/9] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 6/9] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 7/9] ipsec: reorder packet process " Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 8/9] ipsec: de-duplicate crypto op prepare code-path Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-01 12:56 ` [dpdk-dev] [PATCH v5 9/9] doc: add ipsec lib into shared libraries list Konstantin Ananyev
2019-04-01 12:56 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 0/9] Few small improvements for ipsec library Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 1/9] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:49 ` Olivier Matz
2019-04-02 8:49 ` Olivier Matz
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 2/9] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 3/9] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 4/9] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 5/9] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 6/9] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 7/9] ipsec: reorder packet process " Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 8/9] ipsec: de-duplicate crypto op prepare code-path Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 8:34 ` [dpdk-dev] [PATCH v6 9/9] doc: add ipsec lib into shared libraries list Konstantin Ananyev
2019-04-02 8:34 ` Konstantin Ananyev
2019-04-02 15:36 ` [dpdk-dev] [PATCH v6 0/9] Few small improvements for ipsec library Akhil Goyal
2019-04-02 15:36 ` Akhil Goyal
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 2/7] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-03-20 18:46 ` Konstantin Ananyev
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 3/7] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-03-20 18:46 ` Konstantin Ananyev
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 4/7] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-03-20 18:46 ` Konstantin Ananyev
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 5/7] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-03-20 18:46 ` Konstantin Ananyev
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 6/7] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-20 18:46 ` Konstantin Ananyev
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 7/7] ipsec: reorder packet process " Konstantin Ananyev
2019-03-20 18:46 ` Konstantin Ananyev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190329102726.27716-8-konstantin.ananyev@intel.com \
--to=konstantin.ananyev@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=olivier.matz@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).