DPDK patches and discussions
 help / color / mirror / Atom feed
From: Konstantin Ananyev <konstantin.ananyev@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, olivier.matz@6wind.com,
	Konstantin Ananyev <konstantin.ananyev@intel.com>
Subject: [dpdk-dev] [PATCH v5 5/9] ipsec: move inbound and outbound code into different files
Date: Mon,  1 Apr 2019 13:56:52 +0100	[thread overview]
Message-ID: <20190401125656.7636-6-konstantin.ananyev@intel.com> (raw)
Message-ID: <20190401125652.1BED8VoV3I1LJs99NioW_0FlWPMtFMex6WltHN37uxc@z> (raw)
In-Reply-To: <20190401125656.7636-1-konstantin.ananyev@intel.com>

sa.c becomes too big, so decided to split it into 3 chunks:
 - sa.c - control path related functions (init/fini, etc.)
 - esp_inb.c - ESP inbound packet processing
 - esp_outb.c - ESP outbound packet processing

Plus few changes in internal function names to follow the same
code convention.
No functional changes introduced.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
---
 lib/librte_ipsec/Makefile    |    2 +
 lib/librte_ipsec/crypto.h    |   17 +
 lib/librte_ipsec/esp_inb.c   |  439 ++++++++++++++
 lib/librte_ipsec/esp_outb.c  |  559 ++++++++++++++++++
 lib/librte_ipsec/ipsec_sqn.h |   30 -
 lib/librte_ipsec/meson.build |    2 +-
 lib/librte_ipsec/misc.h      |   41 ++
 lib/librte_ipsec/sa.c        | 1067 ++--------------------------------
 lib/librte_ipsec/sa.h        |   40 ++
 9 files changed, 1141 insertions(+), 1056 deletions(-)
 create mode 100644 lib/librte_ipsec/esp_inb.c
 create mode 100644 lib/librte_ipsec/esp_outb.c
 create mode 100644 lib/librte_ipsec/misc.h

diff --git a/lib/librte_ipsec/Makefile b/lib/librte_ipsec/Makefile
index 77506d6ad..e80926baa 100644
--- a/lib/librte_ipsec/Makefile
+++ b/lib/librte_ipsec/Makefile
@@ -16,6 +16,8 @@ EXPORT_MAP := rte_ipsec_version.map
 LIBABIVER := 1
 
 # all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_IPSEC) += esp_inb.c
+SRCS-$(CONFIG_RTE_LIBRTE_IPSEC) += esp_outb.c
 SRCS-$(CONFIG_RTE_LIBRTE_IPSEC) += sa.c
 SRCS-$(CONFIG_RTE_LIBRTE_IPSEC) += ses.c
 
diff --git a/lib/librte_ipsec/crypto.h b/lib/librte_ipsec/crypto.h
index 4f551e39c..3e9a8f41c 100644
--- a/lib/librte_ipsec/crypto.h
+++ b/lib/librte_ipsec/crypto.h
@@ -162,4 +162,21 @@ remove_sqh(void *picv, uint32_t icv_len)
 		icv[i] = icv[i + 1];
 }
 
+/*
+ * setup crypto ops for LOOKASIDE_NONE (pure crypto) type of devices.
+ */
+static inline void
+lksd_none_cop_prepare(struct rte_crypto_op *cop,
+	struct rte_cryptodev_sym_session *cs, struct rte_mbuf *mb)
+{
+	struct rte_crypto_sym_op *sop;
+
+	sop = cop->sym;
+	cop->type = RTE_CRYPTO_OP_TYPE_SYMMETRIC;
+	cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+	cop->sess_type = RTE_CRYPTO_OP_WITH_SESSION;
+	sop->m_src = mb;
+	__rte_crypto_sym_op_attach_sym_session(sop, cs);
+}
+
 #endif /* _CRYPTO_H_ */
diff --git a/lib/librte_ipsec/esp_inb.c b/lib/librte_ipsec/esp_inb.c
new file mode 100644
index 000000000..a775c7b0b
--- /dev/null
+++ b/lib/librte_ipsec/esp_inb.c
@@ -0,0 +1,439 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#include <rte_ipsec.h>
+#include <rte_esp.h>
+#include <rte_ip.h>
+#include <rte_errno.h>
+#include <rte_cryptodev.h>
+
+#include "sa.h"
+#include "ipsec_sqn.h"
+#include "crypto.h"
+#include "iph.h"
+#include "misc.h"
+#include "pad.h"
+
+/*
+ * setup crypto op and crypto sym op for ESP inbound tunnel packet.
+ */
+static inline int32_t
+inb_cop_prepare(struct rte_crypto_op *cop,
+	const struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
+	const union sym_op_data *icv, uint32_t pofs, uint32_t plen)
+{
+	struct rte_crypto_sym_op *sop;
+	struct aead_gcm_iv *gcm;
+	struct aesctr_cnt_blk *ctr;
+	uint64_t *ivc, *ivp;
+	uint32_t algo, clen;
+
+	clen = plen - sa->ctp.cipher.length;
+	if ((int32_t)clen < 0 || (clen & (sa->pad_align - 1)) != 0)
+		return -EINVAL;
+
+	algo = sa->algo_type;
+
+	/* fill sym op fields */
+	sop = cop->sym;
+
+	switch (algo) {
+	case ALGO_TYPE_AES_GCM:
+		sop->aead.data.offset = pofs + sa->ctp.cipher.offset;
+		sop->aead.data.length = clen;
+		sop->aead.digest.data = icv->va;
+		sop->aead.digest.phys_addr = icv->pa;
+		sop->aead.aad.data = icv->va + sa->icv_len;
+		sop->aead.aad.phys_addr = icv->pa + sa->icv_len;
+
+		/* fill AAD IV (located inside crypto op) */
+		gcm = rte_crypto_op_ctod_offset(cop, struct aead_gcm_iv *,
+			sa->iv_ofs);
+		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
+			pofs + sizeof(struct esp_hdr));
+		aead_gcm_iv_fill(gcm, ivp[0], sa->salt);
+		break;
+	case ALGO_TYPE_AES_CBC:
+	case ALGO_TYPE_3DES_CBC:
+		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
+		sop->cipher.data.length = clen;
+		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
+		sop->auth.data.length = plen - sa->ctp.auth.length;
+		sop->auth.digest.data = icv->va;
+		sop->auth.digest.phys_addr = icv->pa;
+
+		/* copy iv from the input packet to the cop */
+		ivc = rte_crypto_op_ctod_offset(cop, uint64_t *, sa->iv_ofs);
+		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
+			pofs + sizeof(struct esp_hdr));
+		copy_iv(ivc, ivp, sa->iv_len);
+		break;
+	case ALGO_TYPE_AES_CTR:
+		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
+		sop->cipher.data.length = clen;
+		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
+		sop->auth.data.length = plen - sa->ctp.auth.length;
+		sop->auth.digest.data = icv->va;
+		sop->auth.digest.phys_addr = icv->pa;
+
+		/* copy iv from the input packet to the cop */
+		ctr = rte_crypto_op_ctod_offset(cop, struct aesctr_cnt_blk *,
+			sa->iv_ofs);
+		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
+			pofs + sizeof(struct esp_hdr));
+		aes_ctr_cnt_blk_fill(ctr, ivp[0], sa->salt);
+		break;
+	case ALGO_TYPE_NULL:
+		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
+		sop->cipher.data.length = clen;
+		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
+		sop->auth.data.length = plen - sa->ctp.auth.length;
+		sop->auth.digest.data = icv->va;
+		sop->auth.digest.phys_addr = icv->pa;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * for pure cryptodev (lookaside none) depending on SA settings,
+ * we might have to write some extra data to the packet.
+ */
+static inline void
+inb_pkt_xprepare(const struct rte_ipsec_sa *sa, rte_be64_t sqc,
+	const union sym_op_data *icv)
+{
+	struct aead_gcm_aad *aad;
+
+	/* insert SQN.hi between ESP trailer and ICV */
+	if (sa->sqh_len != 0)
+		insert_sqh(sqn_hi32(sqc), icv->va, sa->icv_len);
+
+	/*
+	 * fill AAD fields, if any (aad fields are placed after icv),
+	 * right now we support only one AEAD algorithm: AES-GCM.
+	 */
+	if (sa->aad_len != 0) {
+		aad = (struct aead_gcm_aad *)(icv->va + sa->icv_len);
+		aead_gcm_aad_fill(aad, sa->spi, sqc, IS_ESN(sa));
+	}
+}
+
+/*
+ * setup/update packet data and metadata for ESP inbound tunnel case.
+ */
+static inline int32_t
+inb_pkt_prepare(const struct rte_ipsec_sa *sa, const struct replay_sqn *rsn,
+	struct rte_mbuf *mb, uint32_t hlen, union sym_op_data *icv)
+{
+	int32_t rc;
+	uint64_t sqn;
+	uint32_t icv_ofs, plen;
+	struct rte_mbuf *ml;
+	struct esp_hdr *esph;
+
+	esph = rte_pktmbuf_mtod_offset(mb, struct esp_hdr *, hlen);
+
+	/*
+	 * retrieve and reconstruct SQN, then check it, then
+	 * convert it back into network byte order.
+	 */
+	sqn = rte_be_to_cpu_32(esph->seq);
+	if (IS_ESN(sa))
+		sqn = reconstruct_esn(rsn->sqn, sqn, sa->replay.win_sz);
+
+	rc = esn_inb_check_sqn(rsn, sa, sqn);
+	if (rc != 0)
+		return rc;
+
+	sqn = rte_cpu_to_be_64(sqn);
+
+	/* start packet manipulation */
+	plen = mb->pkt_len;
+	plen = plen - hlen;
+
+	ml = rte_pktmbuf_lastseg(mb);
+	icv_ofs = ml->data_len - sa->icv_len + sa->sqh_len;
+
+	/* we have to allocate space for AAD somewhere,
+	 * right now - just use free trailing space at the last segment.
+	 * Would probably be more convenient to reserve space for AAD
+	 * inside rte_crypto_op itself
+	 * (again for IV space is already reserved inside cop).
+	 */
+	if (sa->aad_len + sa->sqh_len > rte_pktmbuf_tailroom(ml))
+		return -ENOSPC;
+
+	icv->va = rte_pktmbuf_mtod_offset(ml, void *, icv_ofs);
+	icv->pa = rte_pktmbuf_iova_offset(ml, icv_ofs);
+
+	inb_pkt_xprepare(sa, sqn, icv);
+	return plen;
+}
+
+/*
+ * setup/update packets and crypto ops for ESP inbound case.
+ */
+uint16_t
+esp_inb_pkt_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+	struct rte_crypto_op *cop[], uint16_t num)
+{
+	int32_t rc;
+	uint32_t i, k, hl;
+	struct rte_ipsec_sa *sa;
+	struct rte_cryptodev_sym_session *cs;
+	struct replay_sqn *rsn;
+	union sym_op_data icv;
+	uint32_t dr[num];
+
+	sa = ss->sa;
+	cs = ss->crypto.ses;
+	rsn = rsn_acquire(sa);
+
+	k = 0;
+	for (i = 0; i != num; i++) {
+
+		hl = mb[i]->l2_len + mb[i]->l3_len;
+		rc = inb_pkt_prepare(sa, rsn, mb[i], hl, &icv);
+		if (rc >= 0) {
+			lksd_none_cop_prepare(cop[k], cs, mb[i]);
+			rc = inb_cop_prepare(cop[k], sa, mb[i], &icv, hl, rc);
+		}
+
+		k += (rc == 0);
+		if (rc != 0) {
+			dr[i - k] = i;
+			rte_errno = -rc;
+		}
+	}
+
+	rsn_release(sa, rsn);
+
+	/* copy not prepared mbufs beyond good ones */
+	if (k != num && k != 0)
+		move_bad_mbufs(mb, dr, num, num - k);
+
+	return k;
+}
+
+/*
+ * process ESP inbound tunnel packet.
+ */
+static inline int
+inb_tun_single_pkt_process(struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
+	uint32_t *sqn)
+{
+	uint32_t hlen, icv_len, tlen;
+	struct esp_hdr *esph;
+	struct esp_tail *espt;
+	struct rte_mbuf *ml;
+	char *pd;
+
+	if (mb->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED)
+		return -EBADMSG;
+
+	icv_len = sa->icv_len;
+
+	ml = rte_pktmbuf_lastseg(mb);
+	espt = rte_pktmbuf_mtod_offset(ml, struct esp_tail *,
+		ml->data_len - icv_len - sizeof(*espt));
+
+	/*
+	 * check padding and next proto.
+	 * return an error if something is wrong.
+	 */
+	pd = (char *)espt - espt->pad_len;
+	if (espt->next_proto != sa->proto ||
+			memcmp(pd, esp_pad_bytes, espt->pad_len))
+		return -EINVAL;
+
+	/* cut of ICV, ESP tail and padding bytes */
+	tlen = icv_len + sizeof(*espt) + espt->pad_len;
+	ml->data_len -= tlen;
+	mb->pkt_len -= tlen;
+
+	/* cut of L2/L3 headers, ESP header and IV */
+	hlen = mb->l2_len + mb->l3_len;
+	esph = rte_pktmbuf_mtod_offset(mb, struct esp_hdr *, hlen);
+	rte_pktmbuf_adj(mb, hlen + sa->ctp.cipher.offset);
+
+	/* retrieve SQN for later check */
+	*sqn = rte_be_to_cpu_32(esph->seq);
+
+	/* reset mbuf metatdata: L2/L3 len, packet type */
+	mb->packet_type = RTE_PTYPE_UNKNOWN;
+	mb->tx_offload = (mb->tx_offload & sa->tx_offload.msk) |
+		sa->tx_offload.val;
+
+	/* clear the PKT_RX_SEC_OFFLOAD flag if set */
+	mb->ol_flags &= ~(mb->ol_flags & PKT_RX_SEC_OFFLOAD);
+	return 0;
+}
+
+/*
+ * process ESP inbound transport packet.
+ */
+static inline int
+inb_trs_single_pkt_process(struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
+	uint32_t *sqn)
+{
+	uint32_t hlen, icv_len, l2len, l3len, tlen;
+	struct esp_hdr *esph;
+	struct esp_tail *espt;
+	struct rte_mbuf *ml;
+	char *np, *op, *pd;
+
+	if (mb->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED)
+		return -EBADMSG;
+
+	icv_len = sa->icv_len;
+
+	ml = rte_pktmbuf_lastseg(mb);
+	espt = rte_pktmbuf_mtod_offset(ml, struct esp_tail *,
+		ml->data_len - icv_len - sizeof(*espt));
+
+	/* check padding, return an error if something is wrong. */
+	pd = (char *)espt - espt->pad_len;
+	if (memcmp(pd, esp_pad_bytes, espt->pad_len))
+		return -EINVAL;
+
+	/* cut of ICV, ESP tail and padding bytes */
+	tlen = icv_len + sizeof(*espt) + espt->pad_len;
+	ml->data_len -= tlen;
+	mb->pkt_len -= tlen;
+
+	/* retrieve SQN for later check */
+	l2len = mb->l2_len;
+	l3len = mb->l3_len;
+	hlen = l2len + l3len;
+	op = rte_pktmbuf_mtod(mb, char *);
+	esph = (struct esp_hdr *)(op + hlen);
+	*sqn = rte_be_to_cpu_32(esph->seq);
+
+	/* cut off ESP header and IV, update L3 header */
+	np = rte_pktmbuf_adj(mb, sa->ctp.cipher.offset);
+	remove_esph(np, op, hlen);
+	update_trs_l3hdr(sa, np + l2len, mb->pkt_len, l2len, l3len,
+			espt->next_proto);
+
+	/* reset mbuf packet type */
+	mb->packet_type &= (RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK);
+
+	/* clear the PKT_RX_SEC_OFFLOAD flag if set */
+	mb->ol_flags &= ~(mb->ol_flags & PKT_RX_SEC_OFFLOAD);
+	return 0;
+}
+
+/*
+ * for group of ESP inbound packets perform SQN check and update.
+ */
+static inline uint16_t
+esp_inb_rsn_update(struct rte_ipsec_sa *sa, const uint32_t sqn[],
+	uint32_t dr[], uint16_t num)
+{
+	uint32_t i, k;
+	struct replay_sqn *rsn;
+
+	rsn = rsn_update_start(sa);
+
+	k = 0;
+	for (i = 0; i != num; i++) {
+		if (esn_inb_update_sqn(rsn, sa, sqn[i]) == 0)
+			k++;
+		else
+			dr[i - k] = i;
+	}
+
+	rsn_update_finish(sa, rsn);
+	return k;
+}
+
+/*
+ * process group of ESP inbound tunnel packets.
+ */
+uint16_t
+esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num)
+{
+	uint32_t i, k, n;
+	struct rte_ipsec_sa *sa;
+	uint32_t sqn[num];
+	uint32_t dr[num];
+
+	sa = ss->sa;
+
+	/* process packets, extract seq numbers */
+
+	k = 0;
+	for (i = 0; i != num; i++) {
+		/* good packet */
+		if (inb_tun_single_pkt_process(sa, mb[i], sqn + k) == 0)
+			k++;
+		/* bad packet, will drop from furhter processing */
+		else
+			dr[i - k] = i;
+	}
+
+	/* handle unprocessed mbufs */
+	if (k != num && k != 0)
+		move_bad_mbufs(mb, dr, num, num - k);
+
+	/* update SQN and replay winow */
+	n = esp_inb_rsn_update(sa, sqn, dr, k);
+
+	/* handle mbufs with wrong SQN */
+	if (n != k && n != 0)
+		move_bad_mbufs(mb, dr, k, k - n);
+
+	if (n != num)
+		rte_errno = EBADMSG;
+
+	return n;
+}
+
+/*
+ * process group of ESP inbound transport packets.
+ */
+uint16_t
+esp_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num)
+{
+	uint32_t i, k, n;
+	uint32_t sqn[num];
+	struct rte_ipsec_sa *sa;
+	uint32_t dr[num];
+
+	sa = ss->sa;
+
+	/* process packets, extract seq numbers */
+
+	k = 0;
+	for (i = 0; i != num; i++) {
+		/* good packet */
+		if (inb_trs_single_pkt_process(sa, mb[i], sqn + k) == 0)
+			k++;
+		/* bad packet, will drop from furhter processing */
+		else
+			dr[i - k] = i;
+	}
+
+	/* handle unprocessed mbufs */
+	if (k != num && k != 0)
+		move_bad_mbufs(mb, dr, num, num - k);
+
+	/* update SQN and replay winow */
+	n = esp_inb_rsn_update(sa, sqn, dr, k);
+
+	/* handle mbufs with wrong SQN */
+	if (n != k && n != 0)
+		move_bad_mbufs(mb, dr, k, k - n);
+
+	if (n != num)
+		rte_errno = EBADMSG;
+
+	return n;
+}
diff --git a/lib/librte_ipsec/esp_outb.c b/lib/librte_ipsec/esp_outb.c
new file mode 100644
index 000000000..09bfb8658
--- /dev/null
+++ b/lib/librte_ipsec/esp_outb.c
@@ -0,0 +1,559 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#include <rte_ipsec.h>
+#include <rte_esp.h>
+#include <rte_ip.h>
+#include <rte_errno.h>
+#include <rte_cryptodev.h>
+
+#include "sa.h"
+#include "ipsec_sqn.h"
+#include "crypto.h"
+#include "iph.h"
+#include "misc.h"
+#include "pad.h"
+
+/*
+ * setup crypto op and crypto sym op for ESP outbound packet.
+ */
+static inline void
+outb_cop_prepare(struct rte_crypto_op *cop,
+	const struct rte_ipsec_sa *sa, const uint64_t ivp[IPSEC_MAX_IV_QWORD],
+	const union sym_op_data *icv, uint32_t hlen, uint32_t plen)
+{
+	struct rte_crypto_sym_op *sop;
+	struct aead_gcm_iv *gcm;
+	struct aesctr_cnt_blk *ctr;
+	uint32_t algo;
+
+	algo = sa->algo_type;
+
+	/* fill sym op fields */
+	sop = cop->sym;
+
+	switch (algo) {
+	case ALGO_TYPE_AES_CBC:
+		/* Cipher-Auth (AES-CBC *) case */
+	case ALGO_TYPE_3DES_CBC:
+		/* Cipher-Auth (3DES-CBC *) case */
+	case ALGO_TYPE_NULL:
+		/* NULL case */
+		sop->cipher.data.offset = sa->ctp.cipher.offset + hlen;
+		sop->cipher.data.length = sa->ctp.cipher.length + plen;
+		sop->auth.data.offset = sa->ctp.auth.offset + hlen;
+		sop->auth.data.length = sa->ctp.auth.length + plen;
+		sop->auth.digest.data = icv->va;
+		sop->auth.digest.phys_addr = icv->pa;
+		break;
+	case ALGO_TYPE_AES_GCM:
+		/* AEAD (AES_GCM) case */
+		sop->aead.data.offset = sa->ctp.cipher.offset + hlen;
+		sop->aead.data.length = sa->ctp.cipher.length + plen;
+		sop->aead.digest.data = icv->va;
+		sop->aead.digest.phys_addr = icv->pa;
+		sop->aead.aad.data = icv->va + sa->icv_len;
+		sop->aead.aad.phys_addr = icv->pa + sa->icv_len;
+
+		/* fill AAD IV (located inside crypto op) */
+		gcm = rte_crypto_op_ctod_offset(cop, struct aead_gcm_iv *,
+			sa->iv_ofs);
+		aead_gcm_iv_fill(gcm, ivp[0], sa->salt);
+		break;
+	case ALGO_TYPE_AES_CTR:
+		/* Cipher-Auth (AES-CTR *) case */
+		sop->cipher.data.offset = sa->ctp.cipher.offset + hlen;
+		sop->cipher.data.length = sa->ctp.cipher.length + plen;
+		sop->auth.data.offset = sa->ctp.auth.offset + hlen;
+		sop->auth.data.length = sa->ctp.auth.length + plen;
+		sop->auth.digest.data = icv->va;
+		sop->auth.digest.phys_addr = icv->pa;
+
+		ctr = rte_crypto_op_ctod_offset(cop, struct aesctr_cnt_blk *,
+			sa->iv_ofs);
+		aes_ctr_cnt_blk_fill(ctr, ivp[0], sa->salt);
+		break;
+	}
+}
+
+/*
+ * setup/update packet data and metadata for ESP outbound tunnel case.
+ */
+static inline int32_t
+outb_tun_pkt_prepare(struct rte_ipsec_sa *sa, rte_be64_t sqc,
+	const uint64_t ivp[IPSEC_MAX_IV_QWORD], struct rte_mbuf *mb,
+	union sym_op_data *icv)
+{
+	uint32_t clen, hlen, l2len, pdlen, pdofs, plen, tlen;
+	struct rte_mbuf *ml;
+	struct esp_hdr *esph;
+	struct esp_tail *espt;
+	char *ph, *pt;
+	uint64_t *iv;
+
+	/* calculate extra header space required */
+	hlen = sa->hdr_len + sa->iv_len + sizeof(*esph);
+
+	/* size of ipsec protected data */
+	l2len = mb->l2_len;
+	plen = mb->pkt_len - l2len;
+
+	/* number of bytes to encrypt */
+	clen = plen + sizeof(*espt);
+	clen = RTE_ALIGN_CEIL(clen, sa->pad_align);
+
+	/* pad length + esp tail */
+	pdlen = clen - plen;
+	tlen = pdlen + sa->icv_len;
+
+	/* do append and prepend */
+	ml = rte_pktmbuf_lastseg(mb);
+	if (tlen + sa->sqh_len + sa->aad_len > rte_pktmbuf_tailroom(ml))
+		return -ENOSPC;
+
+	/* prepend header */
+	ph = rte_pktmbuf_prepend(mb, hlen - l2len);
+	if (ph == NULL)
+		return -ENOSPC;
+
+	/* append tail */
+	pdofs = ml->data_len;
+	ml->data_len += tlen;
+	mb->pkt_len += tlen;
+	pt = rte_pktmbuf_mtod_offset(ml, typeof(pt), pdofs);
+
+	/* update pkt l2/l3 len */
+	mb->tx_offload = (mb->tx_offload & sa->tx_offload.msk) |
+		sa->tx_offload.val;
+
+	/* copy tunnel pkt header */
+	rte_memcpy(ph, sa->hdr, sa->hdr_len);
+
+	/* update original and new ip header fields */
+	update_tun_l3hdr(sa, ph + sa->hdr_l3_off, mb->pkt_len, sa->hdr_l3_off,
+			sqn_low16(sqc));
+
+	/* update spi, seqn and iv */
+	esph = (struct esp_hdr *)(ph + sa->hdr_len);
+	iv = (uint64_t *)(esph + 1);
+	copy_iv(iv, ivp, sa->iv_len);
+
+	esph->spi = sa->spi;
+	esph->seq = sqn_low32(sqc);
+
+	/* offset for ICV */
+	pdofs += pdlen + sa->sqh_len;
+
+	/* pad length */
+	pdlen -= sizeof(*espt);
+
+	/* copy padding data */
+	rte_memcpy(pt, esp_pad_bytes, pdlen);
+
+	/* update esp trailer */
+	espt = (struct esp_tail *)(pt + pdlen);
+	espt->pad_len = pdlen;
+	espt->next_proto = sa->proto;
+
+	icv->va = rte_pktmbuf_mtod_offset(ml, void *, pdofs);
+	icv->pa = rte_pktmbuf_iova_offset(ml, pdofs);
+
+	return clen;
+}
+
+/*
+ * for pure cryptodev (lookaside none) depending on SA settings,
+ * we might have to write some extra data to the packet.
+ */
+static inline void
+outb_pkt_xprepare(const struct rte_ipsec_sa *sa, rte_be64_t sqc,
+	const union sym_op_data *icv)
+{
+	uint32_t *psqh;
+	struct aead_gcm_aad *aad;
+
+	/* insert SQN.hi between ESP trailer and ICV */
+	if (sa->sqh_len != 0) {
+		psqh = (uint32_t *)(icv->va - sa->sqh_len);
+		psqh[0] = sqn_hi32(sqc);
+	}
+
+	/*
+	 * fill IV and AAD fields, if any (aad fields are placed after icv),
+	 * right now we support only one AEAD algorithm: AES-GCM .
+	 */
+	if (sa->aad_len != 0) {
+		aad = (struct aead_gcm_aad *)(icv->va + sa->icv_len);
+		aead_gcm_aad_fill(aad, sa->spi, sqc, IS_ESN(sa));
+	}
+}
+
+/*
+ * setup/update packets and crypto ops for ESP outbound tunnel case.
+ */
+uint16_t
+esp_outb_tun_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+	struct rte_crypto_op *cop[], uint16_t num)
+{
+	int32_t rc;
+	uint32_t i, k, n;
+	uint64_t sqn;
+	rte_be64_t sqc;
+	struct rte_ipsec_sa *sa;
+	struct rte_cryptodev_sym_session *cs;
+	union sym_op_data icv;
+	uint64_t iv[IPSEC_MAX_IV_QWORD];
+	uint32_t dr[num];
+
+	sa = ss->sa;
+	cs = ss->crypto.ses;
+
+	n = num;
+	sqn = esn_outb_update_sqn(sa, &n);
+	if (n != num)
+		rte_errno = EOVERFLOW;
+
+	k = 0;
+	for (i = 0; i != n; i++) {
+
+		sqc = rte_cpu_to_be_64(sqn + i);
+		gen_iv(iv, sqc);
+
+		/* try to update the packet itself */
+		rc = outb_tun_pkt_prepare(sa, sqc, iv, mb[i], &icv);
+
+		/* success, setup crypto op */
+		if (rc >= 0) {
+			outb_pkt_xprepare(sa, sqc, &icv);
+			lksd_none_cop_prepare(cop[k], cs, mb[i]);
+			outb_cop_prepare(cop[k], sa, iv, &icv, 0, rc);
+			k++;
+		/* failure, put packet into the death-row */
+		} else {
+			dr[i - k] = i;
+			rte_errno = -rc;
+		}
+	}
+
+	 /* copy not prepared mbufs beyond good ones */
+	if (k != n && k != 0)
+		move_bad_mbufs(mb, dr, n, n - k);
+
+	return k;
+}
+
+/*
+ * setup/update packet data and metadata for ESP outbound transport case.
+ */
+static inline int32_t
+outb_trs_pkt_prepare(struct rte_ipsec_sa *sa, rte_be64_t sqc,
+	const uint64_t ivp[IPSEC_MAX_IV_QWORD], struct rte_mbuf *mb,
+	uint32_t l2len, uint32_t l3len, union sym_op_data *icv)
+{
+	uint8_t np;
+	uint32_t clen, hlen, pdlen, pdofs, plen, tlen, uhlen;
+	struct rte_mbuf *ml;
+	struct esp_hdr *esph;
+	struct esp_tail *espt;
+	char *ph, *pt;
+	uint64_t *iv;
+
+	uhlen = l2len + l3len;
+	plen = mb->pkt_len - uhlen;
+
+	/* calculate extra header space required */
+	hlen = sa->iv_len + sizeof(*esph);
+
+	/* number of bytes to encrypt */
+	clen = plen + sizeof(*espt);
+	clen = RTE_ALIGN_CEIL(clen, sa->pad_align);
+
+	/* pad length + esp tail */
+	pdlen = clen - plen;
+	tlen = pdlen + sa->icv_len;
+
+	/* do append and insert */
+	ml = rte_pktmbuf_lastseg(mb);
+	if (tlen + sa->sqh_len + sa->aad_len > rte_pktmbuf_tailroom(ml))
+		return -ENOSPC;
+
+	/* prepend space for ESP header */
+	ph = rte_pktmbuf_prepend(mb, hlen);
+	if (ph == NULL)
+		return -ENOSPC;
+
+	/* append tail */
+	pdofs = ml->data_len;
+	ml->data_len += tlen;
+	mb->pkt_len += tlen;
+	pt = rte_pktmbuf_mtod_offset(ml, typeof(pt), pdofs);
+
+	/* shift L2/L3 headers */
+	insert_esph(ph, ph + hlen, uhlen);
+
+	/* update ip  header fields */
+	np = update_trs_l3hdr(sa, ph + l2len, mb->pkt_len, l2len, l3len,
+			IPPROTO_ESP);
+
+	/* update spi, seqn and iv */
+	esph = (struct esp_hdr *)(ph + uhlen);
+	iv = (uint64_t *)(esph + 1);
+	copy_iv(iv, ivp, sa->iv_len);
+
+	esph->spi = sa->spi;
+	esph->seq = sqn_low32(sqc);
+
+	/* offset for ICV */
+	pdofs += pdlen + sa->sqh_len;
+
+	/* pad length */
+	pdlen -= sizeof(*espt);
+
+	/* copy padding data */
+	rte_memcpy(pt, esp_pad_bytes, pdlen);
+
+	/* update esp trailer */
+	espt = (struct esp_tail *)(pt + pdlen);
+	espt->pad_len = pdlen;
+	espt->next_proto = np;
+
+	icv->va = rte_pktmbuf_mtod_offset(ml, void *, pdofs);
+	icv->pa = rte_pktmbuf_iova_offset(ml, pdofs);
+
+	return clen;
+}
+
+/*
+ * setup/update packets and crypto ops for ESP outbound transport case.
+ */
+uint16_t
+esp_outb_trs_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+	struct rte_crypto_op *cop[], uint16_t num)
+{
+	int32_t rc;
+	uint32_t i, k, n, l2, l3;
+	uint64_t sqn;
+	rte_be64_t sqc;
+	struct rte_ipsec_sa *sa;
+	struct rte_cryptodev_sym_session *cs;
+	union sym_op_data icv;
+	uint64_t iv[IPSEC_MAX_IV_QWORD];
+	uint32_t dr[num];
+
+	sa = ss->sa;
+	cs = ss->crypto.ses;
+
+	n = num;
+	sqn = esn_outb_update_sqn(sa, &n);
+	if (n != num)
+		rte_errno = EOVERFLOW;
+
+	k = 0;
+	for (i = 0; i != n; i++) {
+
+		l2 = mb[i]->l2_len;
+		l3 = mb[i]->l3_len;
+
+		sqc = rte_cpu_to_be_64(sqn + i);
+		gen_iv(iv, sqc);
+
+		/* try to update the packet itself */
+		rc = outb_trs_pkt_prepare(sa, sqc, iv, mb[i], l2, l3, &icv);
+
+		/* success, setup crypto op */
+		if (rc >= 0) {
+			outb_pkt_xprepare(sa, sqc, &icv);
+			lksd_none_cop_prepare(cop[k], cs, mb[i]);
+			outb_cop_prepare(cop[k], sa, iv, &icv, l2 + l3, rc);
+			k++;
+		/* failure, put packet into the death-row */
+		} else {
+			dr[i - k] = i;
+			rte_errno = -rc;
+		}
+	}
+
+	/* copy not prepared mbufs beyond good ones */
+	if (k != n && k != 0)
+		move_bad_mbufs(mb, dr, n, n - k);
+
+	return k;
+}
+
+/*
+ * process outbound packets for SA with ESN support,
+ * for algorithms that require SQN.hibits to be implictly included
+ * into digest computation.
+ * In that case we have to move ICV bytes back to their proper place.
+ */
+uint16_t
+esp_outb_sqh_process(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+	uint16_t num)
+{
+	uint32_t i, k, icv_len, *icv;
+	struct rte_mbuf *ml;
+	struct rte_ipsec_sa *sa;
+	uint32_t dr[num];
+
+	sa = ss->sa;
+
+	k = 0;
+	icv_len = sa->icv_len;
+
+	for (i = 0; i != num; i++) {
+		if ((mb[i]->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED) == 0) {
+			ml = rte_pktmbuf_lastseg(mb[i]);
+			icv = rte_pktmbuf_mtod_offset(ml, void *,
+				ml->data_len - icv_len);
+			remove_sqh(icv, icv_len);
+			k++;
+		} else
+			dr[i - k] = i;
+	}
+
+	/* handle unprocessed mbufs */
+	if (k != num) {
+		rte_errno = EBADMSG;
+		if (k != 0)
+			move_bad_mbufs(mb, dr, num, num - k);
+	}
+
+	return k;
+}
+
+/*
+ * prepare packets for inline ipsec processing:
+ * set ol_flags and attach metadata.
+ */
+static inline void
+inline_outb_mbuf_prepare(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num)
+{
+	uint32_t i, ol_flags;
+
+	ol_flags = ss->security.ol_flags & RTE_SECURITY_TX_OLOAD_NEED_MDATA;
+	for (i = 0; i != num; i++) {
+
+		mb[i]->ol_flags |= PKT_TX_SEC_OFFLOAD;
+		if (ol_flags != 0)
+			rte_security_set_pkt_metadata(ss->security.ctx,
+				ss->security.ses, mb[i], NULL);
+	}
+}
+
+/*
+ * process group of ESP outbound tunnel packets destined for
+ * INLINE_CRYPTO type of device.
+ */
+uint16_t
+inline_outb_tun_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num)
+{
+	int32_t rc;
+	uint32_t i, k, n;
+	uint64_t sqn;
+	rte_be64_t sqc;
+	struct rte_ipsec_sa *sa;
+	union sym_op_data icv;
+	uint64_t iv[IPSEC_MAX_IV_QWORD];
+	uint32_t dr[num];
+
+	sa = ss->sa;
+
+	n = num;
+	sqn = esn_outb_update_sqn(sa, &n);
+	if (n != num)
+		rte_errno = EOVERFLOW;
+
+	k = 0;
+	for (i = 0; i != n; i++) {
+
+		sqc = rte_cpu_to_be_64(sqn + i);
+		gen_iv(iv, sqc);
+
+		/* try to update the packet itself */
+		rc = outb_tun_pkt_prepare(sa, sqc, iv, mb[i], &icv);
+
+		k += (rc >= 0);
+
+		/* failure, put packet into the death-row */
+		if (rc < 0) {
+			dr[i - k] = i;
+			rte_errno = -rc;
+		}
+	}
+
+	/* copy not processed mbufs beyond good ones */
+	if (k != n && k != 0)
+		move_bad_mbufs(mb, dr, n, n - k);
+
+	inline_outb_mbuf_prepare(ss, mb, k);
+	return k;
+}
+
+/*
+ * process group of ESP outbound transport packets destined for
+ * INLINE_CRYPTO type of device.
+ */
+uint16_t
+inline_outb_trs_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num)
+{
+	int32_t rc;
+	uint32_t i, k, n, l2, l3;
+	uint64_t sqn;
+	rte_be64_t sqc;
+	struct rte_ipsec_sa *sa;
+	union sym_op_data icv;
+	uint64_t iv[IPSEC_MAX_IV_QWORD];
+	uint32_t dr[num];
+
+	sa = ss->sa;
+
+	n = num;
+	sqn = esn_outb_update_sqn(sa, &n);
+	if (n != num)
+		rte_errno = EOVERFLOW;
+
+	k = 0;
+	for (i = 0; i != n; i++) {
+
+		l2 = mb[i]->l2_len;
+		l3 = mb[i]->l3_len;
+
+		sqc = rte_cpu_to_be_64(sqn + i);
+		gen_iv(iv, sqc);
+
+		/* try to update the packet itself */
+		rc = outb_trs_pkt_prepare(sa, sqc, iv, mb[i],
+				l2, l3, &icv);
+
+		k += (rc >= 0);
+
+		/* failure, put packet into the death-row */
+		if (rc < 0) {
+			dr[i - k] = i;
+			rte_errno = -rc;
+		}
+	}
+
+	/* copy not processed mbufs beyond good ones */
+	if (k != n && k != 0)
+		move_bad_mbufs(mb, dr, n, n - k);
+
+	inline_outb_mbuf_prepare(ss, mb, k);
+	return k;
+}
+
+/*
+ * outbound for RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL:
+ * actual processing is done by HW/PMD, just set flags and metadata.
+ */
+uint16_t
+inline_proto_outb_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num)
+{
+	inline_outb_mbuf_prepare(ss, mb, num);
+	return num;
+}
diff --git a/lib/librte_ipsec/ipsec_sqn.h b/lib/librte_ipsec/ipsec_sqn.h
index a3ae7e2de..4ba079d75 100644
--- a/lib/librte_ipsec/ipsec_sqn.h
+++ b/lib/librte_ipsec/ipsec_sqn.h
@@ -56,21 +56,6 @@ sqn_low16(rte_be64_t sqn)
 #endif
 }
 
-/*
- * for given size, calculate required number of buckets.
- */
-static uint32_t
-replay_num_bucket(uint32_t wsz)
-{
-	uint32_t nb;
-
-	nb = rte_align32pow2(RTE_ALIGN_MUL_CEIL(wsz, WINDOW_BUCKET_SIZE) /
-		WINDOW_BUCKET_SIZE);
-	nb = RTE_MAX(nb, (uint32_t)WINDOW_BUCKET_MIN);
-
-	return nb;
-}
-
 /*
  * According to RFC4303 A2.1, determine the high-order bit of sequence number.
  * use 32bit arithmetic inside, return uint64_t.
@@ -222,21 +207,6 @@ esn_inb_update_sqn(struct replay_sqn *rsn, const struct rte_ipsec_sa *sa,
  * between writer and readers.
  */
 
-/**
- * Based on number of buckets calculated required size for the
- * structure that holds replay window and sequence number (RSN) information.
- */
-static size_t
-rsn_size(uint32_t nb_bucket)
-{
-	size_t sz;
-	struct replay_sqn *rsn;
-
-	sz = sizeof(*rsn) + nb_bucket * sizeof(rsn->window[0]);
-	sz = RTE_ALIGN_CEIL(sz, RTE_CACHE_LINE_SIZE);
-	return sz;
-}
-
 /**
  * Copy replay window and SQN.
  */
diff --git a/lib/librte_ipsec/meson.build b/lib/librte_ipsec/meson.build
index d2427b809..18fb2a143 100644
--- a/lib/librte_ipsec/meson.build
+++ b/lib/librte_ipsec/meson.build
@@ -3,7 +3,7 @@
 
 allow_experimental_apis = true
 
-sources=files('sa.c', 'ses.c')
+sources=files('esp_inb.c', 'esp_outb.c', 'sa.c', 'ses.c')
 
 install_headers = files('rte_ipsec.h', 'rte_ipsec_group.h', 'rte_ipsec_sa.h')
 
diff --git a/lib/librte_ipsec/misc.h b/lib/librte_ipsec/misc.h
new file mode 100644
index 000000000..67a6be2aa
--- /dev/null
+++ b/lib/librte_ipsec/misc.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#ifndef _MISC_H_
+#define _MISC_H_
+
+/**
+ * @file misc.h
+ * Contains miscelaneous functions/structures/macros used internally
+ * by ipsec library.
+ */
+
+/*
+ * Move bad (unprocessed) mbufs beyond the good (processed) ones.
+ * bad_idx[] contains the indexes of bad mbufs inside the mb[].
+ */
+static inline void
+move_bad_mbufs(struct rte_mbuf *mb[], const uint32_t bad_idx[], uint32_t nb_mb,
+	uint32_t nb_bad)
+{
+	uint32_t i, j, k;
+	struct rte_mbuf *drb[nb_bad];
+
+	j = 0;
+	k = 0;
+
+	/* copy bad ones into a temp place */
+	for (i = 0; i != nb_mb; i++) {
+		if (j != nb_bad && i == bad_idx[j])
+			drb[j++] = mb[i];
+		else
+			mb[k++] = mb[i];
+	}
+
+	/* copy bad ones after the good ones */
+	for (i = 0; i != nb_bad; i++)
+		mb[k + i] = drb[i];
+}
+
+#endif /* _MISC_H_ */
diff --git a/lib/librte_ipsec/sa.c b/lib/librte_ipsec/sa.c
index e728c6a28..846e317fe 100644
--- a/lib/librte_ipsec/sa.c
+++ b/lib/librte_ipsec/sa.c
@@ -12,6 +12,7 @@
 #include "ipsec_sqn.h"
 #include "crypto.h"
 #include "iph.h"
+#include "misc.h"
 #include "pad.h"
 
 #define MBUF_MAX_L2_LEN		RTE_LEN2MASK(RTE_MBUF_L2_LEN_BITS, uint64_t)
@@ -82,6 +83,36 @@ rte_ipsec_sa_type(const struct rte_ipsec_sa *sa)
 	return sa->type;
 }
 
+/**
+ * Based on number of buckets calculated required size for the
+ * structure that holds replay window and sequence number (RSN) information.
+ */
+static size_t
+rsn_size(uint32_t nb_bucket)
+{
+	size_t sz;
+	struct replay_sqn *rsn;
+
+	sz = sizeof(*rsn) + nb_bucket * sizeof(rsn->window[0]);
+	sz = RTE_ALIGN_CEIL(sz, RTE_CACHE_LINE_SIZE);
+	return sz;
+}
+
+/*
+ * for given size, calculate required number of buckets.
+ */
+static uint32_t
+replay_num_bucket(uint32_t wsz)
+{
+	uint32_t nb;
+
+	nb = rte_align32pow2(RTE_ALIGN_MUL_CEIL(wsz, WINDOW_BUCKET_SIZE) /
+		WINDOW_BUCKET_SIZE);
+	nb = RTE_MAX(nb, (uint32_t)WINDOW_BUCKET_MIN);
+
+	return nb;
+}
+
 static int32_t
 ipsec_sa_size(uint64_t type, uint32_t *wnd_sz, uint32_t *nb_bucket)
 {
@@ -450,625 +481,6 @@ rte_ipsec_sa_init(struct rte_ipsec_sa *sa, const struct rte_ipsec_sa_prm *prm,
 	return sz;
 }
 
-/*
- * Move bad (unprocessed) mbufs beyond the good (processed) ones.
- * bad_idx[] contains the indexes of bad mbufs inside the mb[].
- */
-static inline void
-move_bad_mbufs(struct rte_mbuf *mb[], const uint32_t bad_idx[], uint32_t nb_mb,
-	uint32_t nb_bad)
-{
-	uint32_t i, j, k;
-	struct rte_mbuf *drb[nb_bad];
-
-	j = 0;
-	k = 0;
-
-	/* copy bad ones into a temp place */
-	for (i = 0; i != nb_mb; i++) {
-		if (j != nb_bad && i == bad_idx[j])
-			drb[j++] = mb[i];
-		else
-			mb[k++] = mb[i];
-	}
-
-	/* copy bad ones after the good ones */
-	for (i = 0; i != nb_bad; i++)
-		mb[k + i] = drb[i];
-}
-
-/*
- * setup crypto ops for LOOKASIDE_NONE (pure crypto) type of devices.
- */
-static inline void
-lksd_none_cop_prepare(struct rte_crypto_op *cop,
-	struct rte_cryptodev_sym_session *cs, struct rte_mbuf *mb)
-{
-	struct rte_crypto_sym_op *sop;
-
-	sop = cop->sym;
-	cop->type = RTE_CRYPTO_OP_TYPE_SYMMETRIC;
-	cop->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
-	cop->sess_type = RTE_CRYPTO_OP_WITH_SESSION;
-	sop->m_src = mb;
-	__rte_crypto_sym_op_attach_sym_session(sop, cs);
-}
-
-/*
- * setup crypto op and crypto sym op for ESP outbound packet.
- */
-static inline void
-esp_outb_cop_prepare(struct rte_crypto_op *cop,
-	const struct rte_ipsec_sa *sa, const uint64_t ivp[IPSEC_MAX_IV_QWORD],
-	const union sym_op_data *icv, uint32_t hlen, uint32_t plen)
-{
-	struct rte_crypto_sym_op *sop;
-	struct aead_gcm_iv *gcm;
-	struct aesctr_cnt_blk *ctr;
-	uint8_t algo_type = sa->algo_type;
-
-	/* fill sym op fields */
-	sop = cop->sym;
-
-	switch (algo_type) {
-	case ALGO_TYPE_AES_CBC:
-		/* Cipher-Auth (AES-CBC *) case */
-	case ALGO_TYPE_3DES_CBC:
-		/* Cipher-Auth (3DES-CBC *) case */
-	case ALGO_TYPE_NULL:
-		/* NULL case */
-		sop->cipher.data.offset = sa->ctp.cipher.offset + hlen;
-		sop->cipher.data.length = sa->ctp.cipher.length + plen;
-		sop->auth.data.offset = sa->ctp.auth.offset + hlen;
-		sop->auth.data.length = sa->ctp.auth.length + plen;
-		sop->auth.digest.data = icv->va;
-		sop->auth.digest.phys_addr = icv->pa;
-		break;
-	case ALGO_TYPE_AES_GCM:
-		/* AEAD (AES_GCM) case */
-		sop->aead.data.offset = sa->ctp.cipher.offset + hlen;
-		sop->aead.data.length = sa->ctp.cipher.length + plen;
-		sop->aead.digest.data = icv->va;
-		sop->aead.digest.phys_addr = icv->pa;
-		sop->aead.aad.data = icv->va + sa->icv_len;
-		sop->aead.aad.phys_addr = icv->pa + sa->icv_len;
-
-		/* fill AAD IV (located inside crypto op) */
-		gcm = rte_crypto_op_ctod_offset(cop, struct aead_gcm_iv *,
-			sa->iv_ofs);
-		aead_gcm_iv_fill(gcm, ivp[0], sa->salt);
-		break;
-	case ALGO_TYPE_AES_CTR:
-		/* Cipher-Auth (AES-CTR *) case */
-		sop->cipher.data.offset = sa->ctp.cipher.offset + hlen;
-		sop->cipher.data.length = sa->ctp.cipher.length + plen;
-		sop->auth.data.offset = sa->ctp.auth.offset + hlen;
-		sop->auth.data.length = sa->ctp.auth.length + plen;
-		sop->auth.digest.data = icv->va;
-		sop->auth.digest.phys_addr = icv->pa;
-
-		ctr = rte_crypto_op_ctod_offset(cop, struct aesctr_cnt_blk *,
-			sa->iv_ofs);
-		aes_ctr_cnt_blk_fill(ctr, ivp[0], sa->salt);
-		break;
-	default:
-		break;
-	}
-}
-
-/*
- * setup/update packet data and metadata for ESP outbound tunnel case.
- */
-static inline int32_t
-esp_outb_tun_pkt_prepare(struct rte_ipsec_sa *sa, rte_be64_t sqc,
-	const uint64_t ivp[IPSEC_MAX_IV_QWORD], struct rte_mbuf *mb,
-	union sym_op_data *icv)
-{
-	uint32_t clen, hlen, l2len, pdlen, pdofs, plen, tlen;
-	struct rte_mbuf *ml;
-	struct esp_hdr *esph;
-	struct esp_tail *espt;
-	char *ph, *pt;
-	uint64_t *iv;
-
-	/* calculate extra header space required */
-	hlen = sa->hdr_len + sa->iv_len + sizeof(*esph);
-
-	/* size of ipsec protected data */
-	l2len = mb->l2_len;
-	plen = mb->pkt_len - l2len;
-
-	/* number of bytes to encrypt */
-	clen = plen + sizeof(*espt);
-	clen = RTE_ALIGN_CEIL(clen, sa->pad_align);
-
-	/* pad length + esp tail */
-	pdlen = clen - plen;
-	tlen = pdlen + sa->icv_len;
-
-	/* do append and prepend */
-	ml = rte_pktmbuf_lastseg(mb);
-	if (tlen + sa->sqh_len + sa->aad_len > rte_pktmbuf_tailroom(ml))
-		return -ENOSPC;
-
-	/* prepend header */
-	ph = rte_pktmbuf_prepend(mb, hlen - l2len);
-	if (ph == NULL)
-		return -ENOSPC;
-
-	/* append tail */
-	pdofs = ml->data_len;
-	ml->data_len += tlen;
-	mb->pkt_len += tlen;
-	pt = rte_pktmbuf_mtod_offset(ml, typeof(pt), pdofs);
-
-	/* update pkt l2/l3 len */
-	mb->tx_offload = (mb->tx_offload & sa->tx_offload.msk) |
-		sa->tx_offload.val;
-
-	/* copy tunnel pkt header */
-	rte_memcpy(ph, sa->hdr, sa->hdr_len);
-
-	/* update original and new ip header fields */
-	update_tun_l3hdr(sa, ph + sa->hdr_l3_off, mb->pkt_len, sa->hdr_l3_off,
-			sqn_low16(sqc));
-
-	/* update spi, seqn and iv */
-	esph = (struct esp_hdr *)(ph + sa->hdr_len);
-	iv = (uint64_t *)(esph + 1);
-	copy_iv(iv, ivp, sa->iv_len);
-
-	esph->spi = sa->spi;
-	esph->seq = sqn_low32(sqc);
-
-	/* offset for ICV */
-	pdofs += pdlen + sa->sqh_len;
-
-	/* pad length */
-	pdlen -= sizeof(*espt);
-
-	/* copy padding data */
-	rte_memcpy(pt, esp_pad_bytes, pdlen);
-
-	/* update esp trailer */
-	espt = (struct esp_tail *)(pt + pdlen);
-	espt->pad_len = pdlen;
-	espt->next_proto = sa->proto;
-
-	icv->va = rte_pktmbuf_mtod_offset(ml, void *, pdofs);
-	icv->pa = rte_pktmbuf_iova_offset(ml, pdofs);
-
-	return clen;
-}
-
-/*
- * for pure cryptodev (lookaside none) depending on SA settings,
- * we might have to write some extra data to the packet.
- */
-static inline void
-outb_pkt_xprepare(const struct rte_ipsec_sa *sa, rte_be64_t sqc,
-	const union sym_op_data *icv)
-{
-	uint32_t *psqh;
-	struct aead_gcm_aad *aad;
-	uint8_t algo_type = sa->algo_type;
-
-	/* insert SQN.hi between ESP trailer and ICV */
-	if (sa->sqh_len != 0) {
-		psqh = (uint32_t *)(icv->va - sa->sqh_len);
-		psqh[0] = sqn_hi32(sqc);
-	}
-
-	/*
-	 * fill IV and AAD fields, if any (aad fields are placed after icv),
-	 * right now we support only one AEAD algorithm: AES-GCM .
-	 */
-	if (algo_type == ALGO_TYPE_AES_GCM) {
-		aad = (struct aead_gcm_aad *)(icv->va + sa->icv_len);
-		aead_gcm_aad_fill(aad, sa->spi, sqc, IS_ESN(sa));
-	}
-}
-
-/*
- * setup/update packets and crypto ops for ESP outbound tunnel case.
- */
-static uint16_t
-outb_tun_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
-	struct rte_crypto_op *cop[], uint16_t num)
-{
-	int32_t rc;
-	uint32_t i, k, n;
-	uint64_t sqn;
-	rte_be64_t sqc;
-	struct rte_ipsec_sa *sa;
-	struct rte_cryptodev_sym_session *cs;
-	union sym_op_data icv;
-	uint64_t iv[IPSEC_MAX_IV_QWORD];
-	uint32_t dr[num];
-
-	sa = ss->sa;
-	cs = ss->crypto.ses;
-
-	n = num;
-	sqn = esn_outb_update_sqn(sa, &n);
-	if (n != num)
-		rte_errno = EOVERFLOW;
-
-	k = 0;
-	for (i = 0; i != n; i++) {
-
-		sqc = rte_cpu_to_be_64(sqn + i);
-		gen_iv(iv, sqc);
-
-		/* try to update the packet itself */
-		rc = esp_outb_tun_pkt_prepare(sa, sqc, iv, mb[i], &icv);
-
-		/* success, setup crypto op */
-		if (rc >= 0) {
-			outb_pkt_xprepare(sa, sqc, &icv);
-			lksd_none_cop_prepare(cop[k], cs, mb[i]);
-			esp_outb_cop_prepare(cop[k], sa, iv, &icv, 0, rc);
-			k++;
-		/* failure, put packet into the death-row */
-		} else {
-			dr[i - k] = i;
-			rte_errno = -rc;
-		}
-	}
-
-	 /* copy not prepared mbufs beyond good ones */
-	if (k != n && k != 0)
-		move_bad_mbufs(mb, dr, n, n - k);
-
-	return k;
-}
-
-/*
- * setup/update packet data and metadata for ESP outbound transport case.
- */
-static inline int32_t
-esp_outb_trs_pkt_prepare(struct rte_ipsec_sa *sa, rte_be64_t sqc,
-	const uint64_t ivp[IPSEC_MAX_IV_QWORD], struct rte_mbuf *mb,
-	uint32_t l2len, uint32_t l3len, union sym_op_data *icv)
-{
-	uint8_t np;
-	uint32_t clen, hlen, pdlen, pdofs, plen, tlen, uhlen;
-	struct rte_mbuf *ml;
-	struct esp_hdr *esph;
-	struct esp_tail *espt;
-	char *ph, *pt;
-	uint64_t *iv;
-
-	uhlen = l2len + l3len;
-	plen = mb->pkt_len - uhlen;
-
-	/* calculate extra header space required */
-	hlen = sa->iv_len + sizeof(*esph);
-
-	/* number of bytes to encrypt */
-	clen = plen + sizeof(*espt);
-	clen = RTE_ALIGN_CEIL(clen, sa->pad_align);
-
-	/* pad length + esp tail */
-	pdlen = clen - plen;
-	tlen = pdlen + sa->icv_len;
-
-	/* do append and insert */
-	ml = rte_pktmbuf_lastseg(mb);
-	if (tlen + sa->sqh_len + sa->aad_len > rte_pktmbuf_tailroom(ml))
-		return -ENOSPC;
-
-	/* prepend space for ESP header */
-	ph = rte_pktmbuf_prepend(mb, hlen);
-	if (ph == NULL)
-		return -ENOSPC;
-
-	/* append tail */
-	pdofs = ml->data_len;
-	ml->data_len += tlen;
-	mb->pkt_len += tlen;
-	pt = rte_pktmbuf_mtod_offset(ml, typeof(pt), pdofs);
-
-	/* shift L2/L3 headers */
-	insert_esph(ph, ph + hlen, uhlen);
-
-	/* update ip  header fields */
-	np = update_trs_l3hdr(sa, ph + l2len, mb->pkt_len, l2len, l3len,
-			IPPROTO_ESP);
-
-	/* update spi, seqn and iv */
-	esph = (struct esp_hdr *)(ph + uhlen);
-	iv = (uint64_t *)(esph + 1);
-	copy_iv(iv, ivp, sa->iv_len);
-
-	esph->spi = sa->spi;
-	esph->seq = sqn_low32(sqc);
-
-	/* offset for ICV */
-	pdofs += pdlen + sa->sqh_len;
-
-	/* pad length */
-	pdlen -= sizeof(*espt);
-
-	/* copy padding data */
-	rte_memcpy(pt, esp_pad_bytes, pdlen);
-
-	/* update esp trailer */
-	espt = (struct esp_tail *)(pt + pdlen);
-	espt->pad_len = pdlen;
-	espt->next_proto = np;
-
-	icv->va = rte_pktmbuf_mtod_offset(ml, void *, pdofs);
-	icv->pa = rte_pktmbuf_iova_offset(ml, pdofs);
-
-	return clen;
-}
-
-/*
- * setup/update packets and crypto ops for ESP outbound transport case.
- */
-static uint16_t
-outb_trs_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
-	struct rte_crypto_op *cop[], uint16_t num)
-{
-	int32_t rc;
-	uint32_t i, k, n, l2, l3;
-	uint64_t sqn;
-	rte_be64_t sqc;
-	struct rte_ipsec_sa *sa;
-	struct rte_cryptodev_sym_session *cs;
-	union sym_op_data icv;
-	uint64_t iv[IPSEC_MAX_IV_QWORD];
-	uint32_t dr[num];
-
-	sa = ss->sa;
-	cs = ss->crypto.ses;
-
-	n = num;
-	sqn = esn_outb_update_sqn(sa, &n);
-	if (n != num)
-		rte_errno = EOVERFLOW;
-
-	k = 0;
-	for (i = 0; i != n; i++) {
-
-		l2 = mb[i]->l2_len;
-		l3 = mb[i]->l3_len;
-
-		sqc = rte_cpu_to_be_64(sqn + i);
-		gen_iv(iv, sqc);
-
-		/* try to update the packet itself */
-		rc = esp_outb_trs_pkt_prepare(sa, sqc, iv, mb[i],
-				l2, l3, &icv);
-
-		/* success, setup crypto op */
-		if (rc >= 0) {
-			outb_pkt_xprepare(sa, sqc, &icv);
-			lksd_none_cop_prepare(cop[k], cs, mb[i]);
-			esp_outb_cop_prepare(cop[k], sa, iv, &icv, l2 + l3, rc);
-			k++;
-		/* failure, put packet into the death-row */
-		} else {
-			dr[i - k] = i;
-			rte_errno = -rc;
-		}
-	}
-
-	/* copy not prepared mbufs beyond good ones */
-	if (k != n && k != 0)
-		move_bad_mbufs(mb, dr, n, n - k);
-
-	return k;
-}
-
-/*
- * setup crypto op and crypto sym op for ESP inbound tunnel packet.
- */
-static inline int32_t
-esp_inb_tun_cop_prepare(struct rte_crypto_op *cop,
-	const struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
-	const union sym_op_data *icv, uint32_t pofs, uint32_t plen)
-{
-	struct rte_crypto_sym_op *sop;
-	struct aead_gcm_iv *gcm;
-	struct aesctr_cnt_blk *ctr;
-	uint64_t *ivc, *ivp;
-	uint32_t clen;
-	uint8_t algo_type = sa->algo_type;
-
-	clen = plen - sa->ctp.cipher.length;
-	if ((int32_t)clen < 0 || (clen & (sa->pad_align - 1)) != 0)
-		return -EINVAL;
-
-	/* fill sym op fields */
-	sop = cop->sym;
-
-	switch (algo_type) {
-	case ALGO_TYPE_AES_GCM:
-		sop->aead.data.offset = pofs + sa->ctp.cipher.offset;
-		sop->aead.data.length = clen;
-		sop->aead.digest.data = icv->va;
-		sop->aead.digest.phys_addr = icv->pa;
-		sop->aead.aad.data = icv->va + sa->icv_len;
-		sop->aead.aad.phys_addr = icv->pa + sa->icv_len;
-
-		/* fill AAD IV (located inside crypto op) */
-		gcm = rte_crypto_op_ctod_offset(cop, struct aead_gcm_iv *,
-			sa->iv_ofs);
-		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
-			pofs + sizeof(struct esp_hdr));
-		aead_gcm_iv_fill(gcm, ivp[0], sa->salt);
-		break;
-	case ALGO_TYPE_AES_CBC:
-	case ALGO_TYPE_3DES_CBC:
-		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
-		sop->cipher.data.length = clen;
-		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
-		sop->auth.data.length = plen - sa->ctp.auth.length;
-		sop->auth.digest.data = icv->va;
-		sop->auth.digest.phys_addr = icv->pa;
-
-		/* copy iv from the input packet to the cop */
-		ivc = rte_crypto_op_ctod_offset(cop, uint64_t *, sa->iv_ofs);
-		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
-			pofs + sizeof(struct esp_hdr));
-		copy_iv(ivc, ivp, sa->iv_len);
-		break;
-	case ALGO_TYPE_AES_CTR:
-		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
-		sop->cipher.data.length = clen;
-		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
-		sop->auth.data.length = plen - sa->ctp.auth.length;
-		sop->auth.digest.data = icv->va;
-		sop->auth.digest.phys_addr = icv->pa;
-
-		/* copy iv from the input packet to the cop */
-		ctr = rte_crypto_op_ctod_offset(cop, struct aesctr_cnt_blk *,
-			sa->iv_ofs);
-		ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
-			pofs + sizeof(struct esp_hdr));
-		aes_ctr_cnt_blk_fill(ctr, ivp[0], sa->salt);
-		break;
-	case ALGO_TYPE_NULL:
-		sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
-		sop->cipher.data.length = clen;
-		sop->auth.data.offset = pofs + sa->ctp.auth.offset;
-		sop->auth.data.length = plen - sa->ctp.auth.length;
-		sop->auth.digest.data = icv->va;
-		sop->auth.digest.phys_addr = icv->pa;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * for pure cryptodev (lookaside none) depending on SA settings,
- * we might have to write some extra data to the packet.
- */
-static inline void
-inb_pkt_xprepare(const struct rte_ipsec_sa *sa, rte_be64_t sqc,
-	const union sym_op_data *icv)
-{
-	struct aead_gcm_aad *aad;
-
-	/* insert SQN.hi between ESP trailer and ICV */
-	if (sa->sqh_len != 0)
-		insert_sqh(sqn_hi32(sqc), icv->va, sa->icv_len);
-
-	/*
-	 * fill AAD fields, if any (aad fields are placed after icv),
-	 * right now we support only one AEAD algorithm: AES-GCM.
-	 */
-	if (sa->aad_len != 0) {
-		aad = (struct aead_gcm_aad *)(icv->va + sa->icv_len);
-		aead_gcm_aad_fill(aad, sa->spi, sqc, IS_ESN(sa));
-	}
-}
-
-/*
- * setup/update packet data and metadata for ESP inbound tunnel case.
- */
-static inline int32_t
-esp_inb_tun_pkt_prepare(const struct rte_ipsec_sa *sa,
-	const struct replay_sqn *rsn, struct rte_mbuf *mb,
-	uint32_t hlen, union sym_op_data *icv)
-{
-	int32_t rc;
-	uint64_t sqn;
-	uint32_t icv_ofs, plen;
-	struct rte_mbuf *ml;
-	struct esp_hdr *esph;
-
-	esph = rte_pktmbuf_mtod_offset(mb, struct esp_hdr *, hlen);
-
-	/*
-	 * retrieve and reconstruct SQN, then check it, then
-	 * convert it back into network byte order.
-	 */
-	sqn = rte_be_to_cpu_32(esph->seq);
-	if (IS_ESN(sa))
-		sqn = reconstruct_esn(rsn->sqn, sqn, sa->replay.win_sz);
-
-	rc = esn_inb_check_sqn(rsn, sa, sqn);
-	if (rc != 0)
-		return rc;
-
-	sqn = rte_cpu_to_be_64(sqn);
-
-	/* start packet manipulation */
-	plen = mb->pkt_len;
-	plen = plen - hlen;
-
-	ml = rte_pktmbuf_lastseg(mb);
-	icv_ofs = ml->data_len - sa->icv_len + sa->sqh_len;
-
-	/* we have to allocate space for AAD somewhere,
-	 * right now - just use free trailing space at the last segment.
-	 * Would probably be more convenient to reserve space for AAD
-	 * inside rte_crypto_op itself
-	 * (again for IV space is already reserved inside cop).
-	 */
-	if (sa->aad_len + sa->sqh_len > rte_pktmbuf_tailroom(ml))
-		return -ENOSPC;
-
-	icv->va = rte_pktmbuf_mtod_offset(ml, void *, icv_ofs);
-	icv->pa = rte_pktmbuf_iova_offset(ml, icv_ofs);
-
-	inb_pkt_xprepare(sa, sqn, icv);
-	return plen;
-}
-
-/*
- * setup/update packets and crypto ops for ESP inbound case.
- */
-static uint16_t
-inb_pkt_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
-	struct rte_crypto_op *cop[], uint16_t num)
-{
-	int32_t rc;
-	uint32_t i, k, hl;
-	struct rte_ipsec_sa *sa;
-	struct rte_cryptodev_sym_session *cs;
-	struct replay_sqn *rsn;
-	union sym_op_data icv;
-	uint32_t dr[num];
-
-	sa = ss->sa;
-	cs = ss->crypto.ses;
-	rsn = rsn_acquire(sa);
-
-	k = 0;
-	for (i = 0; i != num; i++) {
-
-		hl = mb[i]->l2_len + mb[i]->l3_len;
-		rc = esp_inb_tun_pkt_prepare(sa, rsn, mb[i], hl, &icv);
-		if (rc >= 0) {
-			lksd_none_cop_prepare(cop[k], cs, mb[i]);
-			rc = esp_inb_tun_cop_prepare(cop[k], sa, mb[i], &icv,
-				hl, rc);
-		}
-
-		k += (rc == 0);
-		if (rc != 0) {
-			dr[i - k] = i;
-			rte_errno = -rc;
-		}
-	}
-
-	rsn_release(sa, rsn);
-
-	/* copy not prepared mbufs beyond good ones */
-	if (k != num && k != 0)
-		move_bad_mbufs(mb, dr, num, num - k);
-
-	return k;
-}
-
 /*
  *  setup crypto ops for LOOKASIDE_PROTO type of devices.
  */
@@ -1103,265 +515,6 @@ lksd_proto_prepare(const struct rte_ipsec_session *ss,
 	return num;
 }
 
-/*
- * process ESP inbound tunnel packet.
- */
-static inline int
-esp_inb_tun_single_pkt_process(struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
-	uint32_t *sqn)
-{
-	uint32_t hlen, icv_len, tlen;
-	struct esp_hdr *esph;
-	struct esp_tail *espt;
-	struct rte_mbuf *ml;
-	char *pd;
-
-	if (mb->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED)
-		return -EBADMSG;
-
-	icv_len = sa->icv_len;
-
-	ml = rte_pktmbuf_lastseg(mb);
-	espt = rte_pktmbuf_mtod_offset(ml, struct esp_tail *,
-		ml->data_len - icv_len - sizeof(*espt));
-
-	/*
-	 * check padding and next proto.
-	 * return an error if something is wrong.
-	 */
-	pd = (char *)espt - espt->pad_len;
-	if (espt->next_proto != sa->proto ||
-			memcmp(pd, esp_pad_bytes, espt->pad_len))
-		return -EINVAL;
-
-	/* cut of ICV, ESP tail and padding bytes */
-	tlen = icv_len + sizeof(*espt) + espt->pad_len;
-	ml->data_len -= tlen;
-	mb->pkt_len -= tlen;
-
-	/* cut of L2/L3 headers, ESP header and IV */
-	hlen = mb->l2_len + mb->l3_len;
-	esph = rte_pktmbuf_mtod_offset(mb, struct esp_hdr *, hlen);
-	rte_pktmbuf_adj(mb, hlen + sa->ctp.cipher.offset);
-
-	/* retrieve SQN for later check */
-	*sqn = rte_be_to_cpu_32(esph->seq);
-
-	/* reset mbuf metatdata: L2/L3 len, packet type */
-	mb->packet_type = RTE_PTYPE_UNKNOWN;
-	mb->tx_offload = (mb->tx_offload & sa->tx_offload.msk) |
-		sa->tx_offload.val;
-
-	/* clear the PKT_RX_SEC_OFFLOAD flag if set */
-	mb->ol_flags &= ~(mb->ol_flags & PKT_RX_SEC_OFFLOAD);
-	return 0;
-}
-
-/*
- * process ESP inbound transport packet.
- */
-static inline int
-esp_inb_trs_single_pkt_process(struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
-	uint32_t *sqn)
-{
-	uint32_t hlen, icv_len, l2len, l3len, tlen;
-	struct esp_hdr *esph;
-	struct esp_tail *espt;
-	struct rte_mbuf *ml;
-	char *np, *op, *pd;
-
-	if (mb->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED)
-		return -EBADMSG;
-
-	icv_len = sa->icv_len;
-
-	ml = rte_pktmbuf_lastseg(mb);
-	espt = rte_pktmbuf_mtod_offset(ml, struct esp_tail *,
-		ml->data_len - icv_len - sizeof(*espt));
-
-	/* check padding, return an error if something is wrong. */
-	pd = (char *)espt - espt->pad_len;
-	if (memcmp(pd, esp_pad_bytes, espt->pad_len))
-		return -EINVAL;
-
-	/* cut of ICV, ESP tail and padding bytes */
-	tlen = icv_len + sizeof(*espt) + espt->pad_len;
-	ml->data_len -= tlen;
-	mb->pkt_len -= tlen;
-
-	/* retrieve SQN for later check */
-	l2len = mb->l2_len;
-	l3len = mb->l3_len;
-	hlen = l2len + l3len;
-	op = rte_pktmbuf_mtod(mb, char *);
-	esph = (struct esp_hdr *)(op + hlen);
-	*sqn = rte_be_to_cpu_32(esph->seq);
-
-	/* cut off ESP header and IV, update L3 header */
-	np = rte_pktmbuf_adj(mb, sa->ctp.cipher.offset);
-	remove_esph(np, op, hlen);
-	update_trs_l3hdr(sa, np + l2len, mb->pkt_len, l2len, l3len,
-			espt->next_proto);
-
-	/* reset mbuf packet type */
-	mb->packet_type &= (RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK);
-
-	/* clear the PKT_RX_SEC_OFFLOAD flag if set */
-	mb->ol_flags &= ~(mb->ol_flags & PKT_RX_SEC_OFFLOAD);
-	return 0;
-}
-
-/*
- * for group of ESP inbound packets perform SQN check and update.
- */
-static inline uint16_t
-esp_inb_rsn_update(struct rte_ipsec_sa *sa, const uint32_t sqn[],
-	uint32_t dr[], uint16_t num)
-{
-	uint32_t i, k;
-	struct replay_sqn *rsn;
-
-	rsn = rsn_update_start(sa);
-
-	k = 0;
-	for (i = 0; i != num; i++) {
-		if (esn_inb_update_sqn(rsn, sa, sqn[i]) == 0)
-			k++;
-		else
-			dr[i - k] = i;
-	}
-
-	rsn_update_finish(sa, rsn);
-	return k;
-}
-
-/*
- * process group of ESP inbound tunnel packets.
- */
-static uint16_t
-inb_tun_pkt_process(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
-	uint16_t num)
-{
-	uint32_t i, k, n;
-	struct rte_ipsec_sa *sa;
-	uint32_t sqn[num];
-	uint32_t dr[num];
-
-	sa = ss->sa;
-
-	/* process packets, extract seq numbers */
-
-	k = 0;
-	for (i = 0; i != num; i++) {
-		/* good packet */
-		if (esp_inb_tun_single_pkt_process(sa, mb[i], sqn + k) == 0)
-			k++;
-		/* bad packet, will drop from furhter processing */
-		else
-			dr[i - k] = i;
-	}
-
-	/* handle unprocessed mbufs */
-	if (k != num && k != 0)
-		move_bad_mbufs(mb, dr, num, num - k);
-
-	/* update SQN and replay winow */
-	n = esp_inb_rsn_update(sa, sqn, dr, k);
-
-	/* handle mbufs with wrong SQN */
-	if (n != k && n != 0)
-		move_bad_mbufs(mb, dr, k, k - n);
-
-	if (n != num)
-		rte_errno = EBADMSG;
-
-	return n;
-}
-
-/*
- * process group of ESP inbound transport packets.
- */
-static uint16_t
-inb_trs_pkt_process(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
-	uint16_t num)
-{
-	uint32_t i, k, n;
-	uint32_t sqn[num];
-	struct rte_ipsec_sa *sa;
-	uint32_t dr[num];
-
-	sa = ss->sa;
-
-	/* process packets, extract seq numbers */
-
-	k = 0;
-	for (i = 0; i != num; i++) {
-		/* good packet */
-		if (esp_inb_trs_single_pkt_process(sa, mb[i], sqn + k) == 0)
-			k++;
-		/* bad packet, will drop from furhter processing */
-		else
-			dr[i - k] = i;
-	}
-
-	/* handle unprocessed mbufs */
-	if (k != num && k != 0)
-		move_bad_mbufs(mb, dr, num, num - k);
-
-	/* update SQN and replay winow */
-	n = esp_inb_rsn_update(sa, sqn, dr, k);
-
-	/* handle mbufs with wrong SQN */
-	if (n != k && n != 0)
-		move_bad_mbufs(mb, dr, k, k - n);
-
-	if (n != num)
-		rte_errno = EBADMSG;
-
-	return n;
-}
-
-/*
- * process outbound packets for SA with ESN support,
- * for algorithms that require SQN.hibits to be implictly included
- * into digest computation.
- * In that case we have to move ICV bytes back to their proper place.
- */
-static uint16_t
-outb_sqh_process(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
-	uint16_t num)
-{
-	uint32_t i, k, icv_len, *icv;
-	struct rte_mbuf *ml;
-	struct rte_ipsec_sa *sa;
-	uint32_t dr[num];
-
-	sa = ss->sa;
-
-	k = 0;
-	icv_len = sa->icv_len;
-
-	for (i = 0; i != num; i++) {
-		if ((mb[i]->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED) == 0) {
-			ml = rte_pktmbuf_lastseg(mb[i]);
-			icv = rte_pktmbuf_mtod_offset(ml, void *,
-				ml->data_len - icv_len);
-			remove_sqh(icv, icv_len);
-			k++;
-		} else
-			dr[i - k] = i;
-	}
-
-	/* handle unprocessed mbufs */
-	if (k != num) {
-		rte_errno = EBADMSG;
-		if (k != 0)
-			move_bad_mbufs(mb, dr, num, num - k);
-	}
-
-	return k;
-}
-
 /*
  * simplest pkt process routine:
  * all actual processing is already done by HW/PMD,
@@ -1398,142 +551,6 @@ pkt_flag_process(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
 	return k;
 }
 
-/*
- * prepare packets for inline ipsec processing:
- * set ol_flags and attach metadata.
- */
-static inline void
-inline_outb_mbuf_prepare(const struct rte_ipsec_session *ss,
-	struct rte_mbuf *mb[], uint16_t num)
-{
-	uint32_t i, ol_flags;
-
-	ol_flags = ss->security.ol_flags & RTE_SECURITY_TX_OLOAD_NEED_MDATA;
-	for (i = 0; i != num; i++) {
-
-		mb[i]->ol_flags |= PKT_TX_SEC_OFFLOAD;
-		if (ol_flags != 0)
-			rte_security_set_pkt_metadata(ss->security.ctx,
-				ss->security.ses, mb[i], NULL);
-	}
-}
-
-/*
- * process group of ESP outbound tunnel packets destined for
- * INLINE_CRYPTO type of device.
- */
-static uint16_t
-inline_outb_tun_pkt_process(const struct rte_ipsec_session *ss,
-	struct rte_mbuf *mb[], uint16_t num)
-{
-	int32_t rc;
-	uint32_t i, k, n;
-	uint64_t sqn;
-	rte_be64_t sqc;
-	struct rte_ipsec_sa *sa;
-	union sym_op_data icv;
-	uint64_t iv[IPSEC_MAX_IV_QWORD];
-	uint32_t dr[num];
-
-	sa = ss->sa;
-
-	n = num;
-	sqn = esn_outb_update_sqn(sa, &n);
-	if (n != num)
-		rte_errno = EOVERFLOW;
-
-	k = 0;
-	for (i = 0; i != n; i++) {
-
-		sqc = rte_cpu_to_be_64(sqn + i);
-		gen_iv(iv, sqc);
-
-		/* try to update the packet itself */
-		rc = esp_outb_tun_pkt_prepare(sa, sqc, iv, mb[i], &icv);
-
-		k += (rc >= 0);
-
-		/* failure, put packet into the death-row */
-		if (rc < 0) {
-			dr[i - k] = i;
-			rte_errno = -rc;
-		}
-	}
-
-	/* copy not processed mbufs beyond good ones */
-	if (k != n && k != 0)
-		move_bad_mbufs(mb, dr, n, n - k);
-
-	inline_outb_mbuf_prepare(ss, mb, k);
-	return k;
-}
-
-/*
- * process group of ESP outbound transport packets destined for
- * INLINE_CRYPTO type of device.
- */
-static uint16_t
-inline_outb_trs_pkt_process(const struct rte_ipsec_session *ss,
-	struct rte_mbuf *mb[], uint16_t num)
-{
-	int32_t rc;
-	uint32_t i, k, n, l2, l3;
-	uint64_t sqn;
-	rte_be64_t sqc;
-	struct rte_ipsec_sa *sa;
-	union sym_op_data icv;
-	uint64_t iv[IPSEC_MAX_IV_QWORD];
-	uint32_t dr[num];
-
-	sa = ss->sa;
-
-	n = num;
-	sqn = esn_outb_update_sqn(sa, &n);
-	if (n != num)
-		rte_errno = EOVERFLOW;
-
-	k = 0;
-	for (i = 0; i != n; i++) {
-
-		l2 = mb[i]->l2_len;
-		l3 = mb[i]->l3_len;
-
-		sqc = rte_cpu_to_be_64(sqn + i);
-		gen_iv(iv, sqc);
-
-		/* try to update the packet itself */
-		rc = esp_outb_trs_pkt_prepare(sa, sqc, iv, mb[i],
-				l2, l3, &icv);
-
-		k += (rc >= 0);
-
-		/* failure, put packet into the death-row */
-		if (rc < 0) {
-			dr[i - k] = i;
-			rte_errno = -rc;
-		}
-	}
-
-	/* copy not processed mbufs beyond good ones */
-	if (k != n && k != 0)
-		move_bad_mbufs(mb, dr, n, n - k);
-
-	inline_outb_mbuf_prepare(ss, mb, k);
-	return k;
-}
-
-/*
- * outbound for RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL:
- * actual processing is done by HW/PMD, just set flags and metadata.
- */
-static uint16_t
-outb_inline_proto_process(const struct rte_ipsec_session *ss,
-		struct rte_mbuf *mb[], uint16_t num)
-{
-	inline_outb_mbuf_prepare(ss, mb, num);
-	return num;
-}
-
 /*
  * Select packet processing function for session on LOOKASIDE_NONE
  * type of device.
@@ -1551,23 +568,23 @@ lksd_none_pkt_func_select(const struct rte_ipsec_sa *sa,
 	switch (sa->type & msk) {
 	case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TUNLV4):
 	case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TUNLV6):
-		pf->prepare = inb_pkt_prepare;
-		pf->process = inb_tun_pkt_process;
+		pf->prepare = esp_inb_pkt_prepare;
+		pf->process = esp_inb_tun_pkt_process;
 		break;
 	case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TRANS):
-		pf->prepare = inb_pkt_prepare;
-		pf->process = inb_trs_pkt_process;
+		pf->prepare = esp_inb_pkt_prepare;
+		pf->process = esp_inb_trs_pkt_process;
 		break;
 	case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TUNLV4):
 	case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TUNLV6):
-		pf->prepare = outb_tun_prepare;
+		pf->prepare = esp_outb_tun_prepare;
 		pf->process = (sa->sqh_len != 0) ?
-			outb_sqh_process : pkt_flag_process;
+			esp_outb_sqh_process : pkt_flag_process;
 		break;
 	case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TRANS):
-		pf->prepare = outb_trs_prepare;
+		pf->prepare = esp_outb_trs_prepare;
 		pf->process = (sa->sqh_len != 0) ?
-			outb_sqh_process : pkt_flag_process;
+			esp_outb_sqh_process : pkt_flag_process;
 		break;
 	default:
 		rc = -ENOTSUP;
@@ -1593,10 +610,10 @@ inline_crypto_pkt_func_select(const struct rte_ipsec_sa *sa,
 	switch (sa->type & msk) {
 	case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TUNLV4):
 	case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TUNLV6):
-		pf->process = inb_tun_pkt_process;
+		pf->process = esp_inb_tun_pkt_process;
 		break;
 	case (RTE_IPSEC_SATP_DIR_IB | RTE_IPSEC_SATP_MODE_TRANS):
-		pf->process = inb_trs_pkt_process;
+		pf->process = esp_inb_trs_pkt_process;
 		break;
 	case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TUNLV4):
 	case (RTE_IPSEC_SATP_DIR_OB | RTE_IPSEC_SATP_MODE_TUNLV6):
@@ -1637,7 +654,7 @@ ipsec_sa_pkt_func_select(const struct rte_ipsec_session *ss,
 				RTE_IPSEC_SATP_DIR_IB)
 			pf->process = pkt_flag_process;
 		else
-			pf->process = outb_inline_proto_process;
+			pf->process = inline_proto_outb_pkt_process;
 		break;
 	case RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL:
 		pf->prepare = lksd_proto_prepare;
diff --git a/lib/librte_ipsec/sa.h b/lib/librte_ipsec/sa.h
index 48c3c103a..ffb5fb4f8 100644
--- a/lib/librte_ipsec/sa.h
+++ b/lib/librte_ipsec/sa.h
@@ -132,4 +132,44 @@ int
 ipsec_sa_pkt_func_select(const struct rte_ipsec_session *ss,
 	const struct rte_ipsec_sa *sa, struct rte_ipsec_sa_pkt_func *pf);
 
+/* inbound processing */
+
+uint16_t
+esp_inb_pkt_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+	struct rte_crypto_op *cop[], uint16_t num);
+
+uint16_t
+esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num);
+
+uint16_t
+esp_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num);
+
+/* outbound processing */
+
+uint16_t
+esp_outb_tun_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+	struct rte_crypto_op *cop[], uint16_t num);
+
+uint16_t
+esp_outb_trs_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+	struct rte_crypto_op *cop[], uint16_t num);
+
+uint16_t
+esp_outb_sqh_process(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
+	uint16_t num);
+
+uint16_t
+inline_outb_tun_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num);
+
+uint16_t
+inline_outb_trs_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num);
+
+uint16_t
+inline_proto_outb_pkt_process(const struct rte_ipsec_session *ss,
+	struct rte_mbuf *mb[], uint16_t num);
+
 #endif /* _SA_H_ */
-- 
2.17.1


  parent reply	other threads:[~2019-04-01 12:58 UTC|newest]

Thread overview: 163+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-28 19:20 [dpdk-dev] [PATCH 0/6] Few small improvements for ipsec library Konstantin Ananyev
2019-02-28 19:20 ` [dpdk-dev] [PATCH 1/6] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-02-28 19:20 ` [dpdk-dev] [PATCH 2/6] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-02-28 19:20 ` [dpdk-dev] [PATCH 3/6] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-02-28 19:20 ` [dpdk-dev] [PATCH 4/6] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-02-28 19:21 ` [dpdk-dev] [PATCH 5/6] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-02-28 19:21 ` [dpdk-dev] [PATCH 6/6] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 0/7] Few small improvements for ipsec library Konstantin Ananyev
2019-03-20 17:24   ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 1/7] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-03-20 17:24   ` Konstantin Ananyev
2019-03-20 17:53   ` Wiles, Keith
2019-03-20 17:53     ` Wiles, Keith
2019-03-22 17:37     ` Ananyev, Konstantin
2019-03-22 17:37       ` Ananyev, Konstantin
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 2/7] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-03-20 17:24   ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 3/7] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-03-20 17:24   ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 4/7] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-03-20 17:24   ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 5/7] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-03-20 17:24   ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 6/7] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-20 17:24   ` Konstantin Ananyev
2019-03-20 17:24 ` [dpdk-dev] [PATCH v2 7/7] ipsec: reorder packet process " Konstantin Ananyev
2019-03-20 17:24   ` Konstantin Ananyev
2019-03-20 18:46 ` [dpdk-dev] [PATCH v2 0/7] Few small improvements for ipsec library Konstantin Ananyev
2019-03-20 18:46   ` Konstantin Ananyev
2019-03-20 18:46   ` [dpdk-dev] [PATCH v2 1/7] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-03-20 18:46     ` Konstantin Ananyev
2019-03-21  3:33     ` Jerin Jacob Kollanukkaran
2019-03-21  3:33       ` Jerin Jacob Kollanukkaran
2019-03-21  6:04     ` Shahaf Shuler
2019-03-21  6:04       ` Shahaf Shuler
2019-03-21 13:51       ` Ananyev, Konstantin
2019-03-21 13:51         ` Ananyev, Konstantin
2019-03-24  8:00         ` Shahaf Shuler
2019-03-24  8:00           ` Shahaf Shuler
2019-03-26 15:43     ` [dpdk-dev] [PATCH v3 0/8] Few small improvements for ipsec library Konstantin Ananyev
2019-03-26 15:43       ` Konstantin Ananyev
2019-03-26 15:43       ` [dpdk-dev] [PATCH v3 1/8] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-03-26 15:43         ` Konstantin Ananyev
2019-03-28  8:16         ` Akhil Goyal
2019-03-28  8:16           ` Akhil Goyal
2019-03-26 15:43       ` [dpdk-dev] [PATCH v3 2/8] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-03-26 15:43         ` Konstantin Ananyev
2019-03-28  8:52         ` Akhil Goyal
2019-03-28  8:52           ` Akhil Goyal
2019-03-26 15:43       ` [dpdk-dev] [PATCH v3 3/8] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-03-26 15:43         ` Konstantin Ananyev
2019-03-28  9:02         ` Akhil Goyal
2019-03-28  9:02           ` Akhil Goyal
2019-03-26 15:43       ` [dpdk-dev] [PATCH v3 4/8] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-03-26 15:43         ` Konstantin Ananyev
2019-03-28 10:52         ` Akhil Goyal
2019-03-28 10:52           ` Akhil Goyal
2019-03-26 15:43       ` [dpdk-dev] [PATCH v3 5/8] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-03-26 15:43         ` Konstantin Ananyev
2019-03-28 11:20         ` Akhil Goyal
2019-03-28 11:20           ` Akhil Goyal
2019-03-26 15:43       ` [dpdk-dev] [PATCH v3 6/8] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-26 15:43         ` Konstantin Ananyev
2019-03-28 11:27         ` Akhil Goyal
2019-03-28 11:27           ` Akhil Goyal
2019-03-26 15:43       ` [dpdk-dev] [PATCH v3 7/8] ipsec: reorder packet process " Konstantin Ananyev
2019-03-26 15:43         ` Konstantin Ananyev
2019-03-26 15:43       ` [dpdk-dev] [PATCH v3 8/8] ipsec: de-duplicate crypto op prepare code-path Konstantin Ananyev
2019-03-26 15:43         ` Konstantin Ananyev
2019-03-28 11:35         ` Akhil Goyal
2019-03-28 11:35           ` Akhil Goyal
2019-03-28 11:21       ` [dpdk-dev] [PATCH v3 0/8] Few small improvements for ipsec library Akhil Goyal
2019-03-28 11:21         ` Akhil Goyal
2019-03-28 11:49         ` Ananyev, Konstantin
2019-03-28 11:49           ` Ananyev, Konstantin
2019-03-29 10:27       ` [dpdk-dev] [PATCH v4 0/9] " Konstantin Ananyev
2019-03-29 10:27         ` Konstantin Ananyev
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 1/9] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 12:54           ` Olivier Matz
2019-03-29 12:54             ` Olivier Matz
2019-03-30 14:20             ` Ananyev, Konstantin
2019-03-30 14:20               ` Ananyev, Konstantin
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 2/9] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 3/9] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 4/9] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 5/9] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 6/9] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 7/9] ipsec: reorder packet process " Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 8/9] ipsec: de-duplicate crypto op prepare code-path Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 10:27         ` [dpdk-dev] [PATCH v4 9/9] doc: add ipsec lib into shared libraries list Konstantin Ananyev
2019-03-29 10:27           ` Konstantin Ananyev
2019-03-29 16:03           ` Akhil Goyal
2019-03-29 16:03             ` Akhil Goyal
2019-04-01 12:56         ` [dpdk-dev] [PATCH v5 0/9] Few small improvements for ipsec library Konstantin Ananyev
2019-04-01 12:56           ` Konstantin Ananyev
2019-04-01 12:56           ` [dpdk-dev] [PATCH v5 1/9] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-04-01 12:56             ` Konstantin Ananyev
2019-04-01 13:18             ` Akhil Goyal
2019-04-01 13:18               ` Akhil Goyal
2019-04-01 13:22             ` Olivier Matz
2019-04-01 13:22               ` Olivier Matz
2019-04-01 13:55               ` Ananyev, Konstantin
2019-04-01 13:55                 ` Ananyev, Konstantin
2019-04-01 12:56           ` [dpdk-dev] [PATCH v5 2/9] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-04-01 12:56             ` Konstantin Ananyev
2019-04-01 12:56           ` [dpdk-dev] [PATCH v5 3/9] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-04-01 12:56             ` Konstantin Ananyev
2019-04-01 12:56           ` [dpdk-dev] [PATCH v5 4/9] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-04-01 12:56             ` Konstantin Ananyev
2019-04-01 12:56           ` Konstantin Ananyev [this message]
2019-04-01 12:56             ` [dpdk-dev] [PATCH v5 5/9] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-04-01 12:56           ` [dpdk-dev] [PATCH v5 6/9] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-04-01 12:56             ` Konstantin Ananyev
2019-04-01 12:56           ` [dpdk-dev] [PATCH v5 7/9] ipsec: reorder packet process " Konstantin Ananyev
2019-04-01 12:56             ` Konstantin Ananyev
2019-04-01 12:56           ` [dpdk-dev] [PATCH v5 8/9] ipsec: de-duplicate crypto op prepare code-path Konstantin Ananyev
2019-04-01 12:56             ` Konstantin Ananyev
2019-04-01 12:56           ` [dpdk-dev] [PATCH v5 9/9] doc: add ipsec lib into shared libraries list Konstantin Ananyev
2019-04-01 12:56             ` Konstantin Ananyev
2019-04-02  8:34           ` [dpdk-dev] [PATCH v6 0/9] Few small improvements for ipsec library Konstantin Ananyev
2019-04-02  8:34             ` Konstantin Ananyev
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 1/9] mbuf: new function to generate raw Tx offload value Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02  8:49               ` Olivier Matz
2019-04-02  8:49                 ` Olivier Matz
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 2/9] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 3/9] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 4/9] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 5/9] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 6/9] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 7/9] ipsec: reorder packet process " Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 8/9] ipsec: de-duplicate crypto op prepare code-path Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02  8:34             ` [dpdk-dev] [PATCH v6 9/9] doc: add ipsec lib into shared libraries list Konstantin Ananyev
2019-04-02  8:34               ` Konstantin Ananyev
2019-04-02 15:36             ` [dpdk-dev] [PATCH v6 0/9] Few small improvements for ipsec library Akhil Goyal
2019-04-02 15:36               ` Akhil Goyal
2019-03-20 18:46   ` [dpdk-dev] [PATCH v2 2/7] ipsec: add Tx offload template into SA Konstantin Ananyev
2019-03-20 18:46     ` Konstantin Ananyev
2019-03-20 18:46   ` [dpdk-dev] [PATCH v2 3/7] ipsec: change the order in filling crypto op Konstantin Ananyev
2019-03-20 18:46     ` Konstantin Ananyev
2019-03-20 18:46   ` [dpdk-dev] [PATCH v2 4/7] ipsec: change the way unprocessed mbufs are accounted Konstantin Ananyev
2019-03-20 18:46     ` Konstantin Ananyev
2019-03-20 18:46   ` [dpdk-dev] [PATCH v2 5/7] ipsec: move inbound and outbound code into different files Konstantin Ananyev
2019-03-20 18:46     ` Konstantin Ananyev
2019-03-20 18:46   ` [dpdk-dev] [PATCH v2 6/7] ipsec: reorder packet check for esp inbound Konstantin Ananyev
2019-03-20 18:46     ` Konstantin Ananyev
2019-03-20 18:46   ` [dpdk-dev] [PATCH v2 7/7] ipsec: reorder packet process " Konstantin Ananyev
2019-03-20 18:46     ` Konstantin Ananyev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190401125656.7636-6-konstantin.ananyev@intel.com \
    --to=konstantin.ananyev@intel.com \
    --cc=akhil.goyal@nxp.com \
    --cc=dev@dpdk.org \
    --cc=olivier.matz@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).