DPDK patches and discussions
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH v4 0/3] use RFC addresses in test applications
Date: Tue,  2 Apr 2019 13:39:04 -0700	[thread overview]
Message-ID: <20190402203907.28679-1-stephen@networkplumber.org> (raw)
Message-ID: <20190402203904.1S4Uehjxy9dwLz0E1LPJm_xQ4XVCADAUodQcaDtRYt0@z> (raw)
In-Reply-To: <20180618213557.15209-2-stephen@networkplumber.org>

These patches get rid of the custom addresses used in testpmd
and l3fwd, and instead uses values that are in the existing
RFC's.

Stephen Hemminger (3):
  app/testpmd: add ability to set Tx IP and UDP parameters
  examples/l3fwd: use reserved IPv4/IPv6 addresses
  examples/l3fwd: format the IP addresses for printing

 app/test-pmd/parameters.c             | 49 +++++++++++++++++++++++++++
 app/test-pmd/testpmd.h                |  6 ++++
 app/test-pmd/txonly.c                 | 22 +++++++-----
 doc/guides/testpmd_app_ug/run_app.rst | 12 ++++++-
 examples/l3fwd/l3fwd_lpm.c            | 49 +++++++++++++++------------
 5 files changed, 107 insertions(+), 31 deletions(-)

-- 
2.17.1


  parent reply	other threads:[~2019-04-02 20:39 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-18 21:35 [dpdk-dev] [PATCH v3 0/3] use RFC addresses for testing Stephen Hemminger
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 1/3] testpmd: add ability to set tx IP and UDP parameters Stephen Hemminger
2018-06-22  9:12   ` Iremonger, Bernard
2018-10-29  2:25     ` Thomas Monjalon
2018-06-26 11:47   ` Shahaf Shuler
2018-06-26 11:51   ` Shahaf Shuler
2019-04-02 20:39   ` Stephen Hemminger [this message]
2019-04-02 20:39     ` [dpdk-dev] [PATCH v4 0/3] use RFC addresses in test applications Stephen Hemminger
2019-04-02 20:39     ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-02 20:39       ` Stephen Hemminger
2019-04-08 12:51       ` Iremonger, Bernard
2019-04-08 12:51         ` Iremonger, Bernard
2019-04-02 20:39     ` [dpdk-dev] [PATCH v4 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-02 20:39       ` Stephen Hemminger
2019-04-08 13:07       ` Iremonger, Bernard
2019-04-08 13:07         ` Iremonger, Bernard
2019-04-09 17:14         ` Stephen Hemminger
2019-04-09 17:14           ` Stephen Hemminger
2019-04-02 20:39     ` [dpdk-dev] [PATCH v4 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-02 20:39       ` Stephen Hemminger
2019-04-08 13:14       ` Iremonger, Bernard
2019-04-08 13:14         ` Iremonger, Bernard
2019-04-09 18:20     ` [dpdk-dev] [PATCH v5 0/3] use RFC addresses in test applications Stephen Hemminger
2019-04-09 18:20       ` Stephen Hemminger
2019-04-09 18:20       ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-09 18:20         ` Stephen Hemminger
2019-04-10 10:07         ` Iremonger, Bernard
2019-04-10 10:07           ` Iremonger, Bernard
2019-04-09 18:20       ` [dpdk-dev] [PATCH v5 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-09 18:20         ` Stephen Hemminger
2019-04-10  8:56         ` Iremonger, Bernard
2019-04-10  8:56           ` Iremonger, Bernard
2019-04-09 18:20       ` [dpdk-dev] [PATCH v5 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-09 18:20         ` Stephen Hemminger
2019-04-10 17:41       ` [dpdk-dev] [PATCH v6 0/3] use IPv4 addresses reserved for testing Stephen Hemminger
2019-04-10 17:41         ` Stephen Hemminger
2019-04-10 17:41         ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-10 17:41           ` Stephen Hemminger
2019-04-11  9:02           ` Iremonger, Bernard
2019-04-11  9:02             ` Iremonger, Bernard
2019-04-10 17:41         ` [dpdk-dev] [PATCH v6 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-10 17:41           ` Stephen Hemminger
2019-04-11  9:08           ` Iremonger, Bernard
2019-04-11  9:08             ` Iremonger, Bernard
2019-04-10 17:41         ` [dpdk-dev] [PATCH v6 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-10 17:41           ` Stephen Hemminger
2019-04-21 21:55         ` [dpdk-dev] [PATCH v6 0/3] use IPv4 addresses reserved for testing Thomas Monjalon
2019-04-21 21:55           ` Thomas Monjalon
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2018-06-22  9:19   ` Iremonger, Bernard
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2018-06-22 10:23   ` Iremonger, Bernard
2018-06-22 13:44     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190402203907.28679-1-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).