DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Zhao1, Wei" <wei.zhao1@intel.com>
To: David Harton <dharton@cisco.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
	"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
	"Zhang, Qi Z" <qi.z.zhang@intel.com>
Subject: Re: [dpdk-dev] [PATCH] net/ixgbevf: remove MTU setting limitation
Date: Wed, 3 Apr 2019 02:25:44 +0000	[thread overview]
Message-ID: <A2573D2ACFCADC41BB3BE09C6DE313CA07ECE373@PGSMSX103.gar.corp.intel.com> (raw)
Message-ID: <20190403022544.W4t_p3ONlXk9tAa7uap5q82RUK9nz8-p8AYyJyQq9is@z> (raw)
In-Reply-To: <20190403011833.20428-1-dharton@cisco.com>

HI, 

Why not add some more code 
"
	if (rx_conf->offloads & DEV_RX_OFFLOAD_SCATTER)
		dev->data->scattered_rx = 1;
" 

Into ixgbevf_dev_rx_init() to enable scatter mode when start device?


Reviewed-by: Wei Zhao <wei.zhao1@intel.com>


> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of David Harton
> Sent: Wednesday, April 3, 2019 9:19 AM
> To: dev@dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> <konstantin.ananyev@intel.com>; David Harton <dharton@cisco.com>
> Subject: [dpdk-dev] [PATCH] net/ixgbevf: remove MTU setting limitation
> 
> Currently, if requested MTU is bigger than mbuf size and scattered receive is
> not enabled, setting MTU to that value fails.
> 
> This patch allows setting this special MTU when device is stopped, because
> scattered_rx will be re-configured during next port start and driver may
> enable scattered receive according new MTU value.
> 
> After this patch, driver may select different receive function automatically
> after MTU set, according MTU values selected.
> 
> Signed-off-by: David Harton <dharton@cisco.com>
> ---
>  drivers/net/ixgbe/ixgbe_ethdev.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
> b/drivers/net/ixgbe/ixgbe_ethdev.c
> index feec85634..0b962c8db 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -6346,20 +6346,22 @@ ixgbevf_dev_set_mtu(struct rte_eth_dev *dev,
> uint16_t mtu)  {
>  	struct ixgbe_hw *hw;
>  	uint32_t max_frame = mtu + IXGBE_ETH_OVERHEAD;
> -	struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode;
> +	struct rte_eth_dev_data *dev_data = dev->data;
> 
>  	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> 
>  	if ((mtu < ETHER_MIN_MTU) || (max_frame >
> ETHER_MAX_JUMBO_FRAME_LEN))
>  		return -EINVAL;
> 
> -	/* refuse mtu that requires the support of scattered packets when
> this
> -	 * feature has not been enabled before.
> +	/* If device is started, refuse mtu that requires the support of
> +	 * scattered packets when this feature has not been enabled before.
>  	 */
> -	if (!(rx_conf->offloads & DEV_RX_OFFLOAD_SCATTER) &&
> +	if (dev_data->dev_started && !dev_data->scattered_rx &&
>  	    (max_frame + 2 * IXGBE_VLAN_TAG_SIZE >
> -	     dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM))
> +	     dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)) {
> +		PMD_INIT_LOG(ERR, "Stop port first.");
>  		return -EINVAL;
> +	}
> 
>  	/*
>  	 * When supported by the underlying PF driver, use the
> IXGBE_VF_SET_MTU
> --
> 2.19.1


  parent reply	other threads:[~2019-04-03  2:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-03  1:18 David Harton
2019-04-03  1:18 ` David Harton
2019-04-03  2:25 ` Zhao1, Wei [this message]
2019-04-03  2:25   ` Zhao1, Wei
2019-04-03 12:36   ` David Harton (dharton)
2019-04-03 12:36     ` David Harton (dharton)
2019-04-08  6:13     ` Zhao1, Wei
2019-04-08  6:13       ` Zhao1, Wei
2019-04-05  7:49   ` Zhang, Qi Z
2019-04-05  7:49     ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=A2573D2ACFCADC41BB3BE09C6DE313CA07ECE373@PGSMSX103.gar.corp.intel.com \
    --to=wei.zhao1@intel.com \
    --cc=dev@dpdk.org \
    --cc=dharton@cisco.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=qi.z.zhang@intel.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).