DPDK patches and discussions
 help / color / mirror / Atom feed
From: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
To: konstantin.ananyev@intel.com, stephen@networkplumber.org,
	paulmck@linux.ibm.com, marko.kovacevic@intel.com, dev@dpdk.org
Cc: honnappa.nagarahalli@arm.com, gavin.hu@arm.com,
	dharmik.thakkar@arm.com, malvika.gupta@arm.com
Subject: [dpdk-dev] [PATCH v5 1/3] rcu: add RCU library supporting QSBR mechanism
Date: Fri, 12 Apr 2019 15:20:37 -0500	[thread overview]
Message-ID: <20190412202039.46902-2-honnappa.nagarahalli@arm.com> (raw)
In-Reply-To: <20190412202039.46902-1-honnappa.nagarahalli@arm.com>

Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.

Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
 MAINTAINERS                        |   5 +
 config/common_base                 |   6 +
 lib/Makefile                       |   2 +
 lib/librte_rcu/Makefile            |  23 +
 lib/librte_rcu/meson.build         |   5 +
 lib/librte_rcu/rte_rcu_qsbr.c      | 237 +++++++++++
 lib/librte_rcu/rte_rcu_qsbr.h      | 645 +++++++++++++++++++++++++++++
 lib/librte_rcu/rte_rcu_version.map |  11 +
 lib/meson.build                    |   2 +-
 mk/rte.app.mk                      |   1 +
 10 files changed, 936 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_rcu/Makefile
 create mode 100644 lib/librte_rcu/meson.build
 create mode 100644 lib/librte_rcu/rte_rcu_qsbr.c
 create mode 100644 lib/librte_rcu/rte_rcu_qsbr.h
 create mode 100644 lib/librte_rcu/rte_rcu_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 9774344dd..6e9766eed 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1267,6 +1267,11 @@ F: examples/bpf/
 F: app/test/test_bpf.c
 F: doc/guides/prog_guide/bpf_lib.rst
 
+RCU - EXPERIMENTAL
+M: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
+F: lib/librte_rcu/
+F: doc/guides/prog_guide/rcu_lib.rst
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index 8da08105b..ad70c79e1 100644
--- a/config/common_base
+++ b/config/common_base
@@ -829,6 +829,12 @@ CONFIG_RTE_LIBRTE_LATENCY_STATS=y
 #
 CONFIG_RTE_LIBRTE_TELEMETRY=n
 
+#
+# Compile librte_rcu
+#
+CONFIG_RTE_LIBRTE_RCU=y
+CONFIG_RTE_LIBRTE_RCU_DEBUG=n
+
 #
 # Compile librte_lpm
 #
diff --git a/lib/Makefile b/lib/Makefile
index 26021d0c0..791e0d991 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -111,6 +111,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_IPSEC) += librte_ipsec
 DEPDIRS-librte_ipsec := librte_eal librte_mbuf librte_cryptodev librte_security
 DIRS-$(CONFIG_RTE_LIBRTE_TELEMETRY) += librte_telemetry
 DEPDIRS-librte_telemetry := librte_eal librte_metrics librte_ethdev
+DIRS-$(CONFIG_RTE_LIBRTE_RCU) += librte_rcu
+DEPDIRS-librte_rcu := librte_eal
 
 ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
 DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni
diff --git a/lib/librte_rcu/Makefile b/lib/librte_rcu/Makefile
new file mode 100644
index 000000000..6aa677bd1
--- /dev/null
+++ b/lib/librte_rcu/Makefile
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Arm Limited
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_rcu.a
+
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+LDLIBS += -lrte_eal
+
+EXPORT_MAP := rte_rcu_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_RCU) := rte_rcu_qsbr.c
+
+# install includes
+SYMLINK-$(CONFIG_RTE_LIBRTE_RCU)-include := rte_rcu_qsbr.h
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_rcu/meson.build b/lib/librte_rcu/meson.build
new file mode 100644
index 000000000..c009ae4b7
--- /dev/null
+++ b/lib/librte_rcu/meson.build
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Arm Limited
+
+sources = files('rte_rcu_qsbr.c')
+headers = files('rte_rcu_qsbr.h')
diff --git a/lib/librte_rcu/rte_rcu_qsbr.c b/lib/librte_rcu/rte_rcu_qsbr.c
new file mode 100644
index 000000000..4aeb5f37f
--- /dev/null
+++ b/lib/librte_rcu/rte_rcu_qsbr.c
@@ -0,0 +1,237 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright (c) 2018 Arm Limited
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_eal.h>
+#include <rte_eal_memconfig.h>
+#include <rte_atomic.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_errno.h>
+
+#include "rte_rcu_qsbr.h"
+
+/* Get the memory size of QSBR variable */
+size_t __rte_experimental
+rte_rcu_qsbr_get_memsize(uint32_t max_threads)
+{
+	size_t sz;
+
+	if (max_threads == 0) {
+		rte_log(RTE_LOG_ERR, rcu_log_type,
+			"%s(): Invalid max_threads %u\n",
+			__func__, max_threads);
+		rte_errno = EINVAL;
+
+		return 1;
+	}
+
+	sz = sizeof(struct rte_rcu_qsbr);
+
+	/* Add the size of quiescent state counter array */
+	sz += sizeof(struct rte_rcu_qsbr_cnt) * max_threads;
+
+	/* Add the size of the registered thread ID bitmap array */
+	sz += RTE_QSBR_THRID_ARRAY_SIZE(max_threads);
+
+	return sz;
+}
+
+/* Initialize a quiescent state variable */
+int __rte_experimental
+rte_rcu_qsbr_init(struct rte_rcu_qsbr *v, uint32_t max_threads)
+{
+	size_t sz;
+
+	if (v == NULL) {
+		rte_log(RTE_LOG_ERR, rcu_log_type,
+			"%s(): Invalid input parameter\n", __func__);
+		rte_errno = EINVAL;
+
+		return 1;
+	}
+
+	sz = rte_rcu_qsbr_get_memsize(max_threads);
+	if (sz == 1)
+		return 1;
+
+	/* Set all the threads to offline */
+	memset(v, 0, sz);
+	v->max_threads = max_threads;
+	v->num_elems = RTE_ALIGN_MUL_CEIL(max_threads,
+			RTE_QSBR_THRID_ARRAY_ELM_SIZE) /
+			RTE_QSBR_THRID_ARRAY_ELM_SIZE;
+	v->token = RTE_QSBR_CNT_INIT;
+
+	return 0;
+}
+
+/* Register a reader thread to report its quiescent state
+ * on a QS variable.
+ */
+int __rte_experimental
+rte_rcu_qsbr_thread_register(struct rte_rcu_qsbr *v, unsigned int thread_id)
+{
+	unsigned int i, id, success;
+	uint64_t old_bmap, new_bmap;
+
+	if (v == NULL || thread_id >= v->max_threads) {
+		rte_log(RTE_LOG_ERR, rcu_log_type,
+			"%s(): Invalid input parameter\n", __func__);
+		rte_errno = EINVAL;
+
+		return 1;
+	}
+
+	id = thread_id & RTE_QSBR_THRID_MASK;
+	i = thread_id >> RTE_QSBR_THRID_INDEX_SHIFT;
+
+	/* Make sure that the counter for registered threads does not
+	 * go out of sync. Hence, additional checks are required.
+	 */
+	/* Check if the thread is already registered */
+	old_bmap = __atomic_load_n(RTE_QSBR_THRID_ARRAY_ELM(v, i),
+					__ATOMIC_RELAXED);
+	if (old_bmap & 1UL << id)
+		return 0;
+
+	do {
+		new_bmap = old_bmap | (1UL << id);
+		success = __atomic_compare_exchange(
+					RTE_QSBR_THRID_ARRAY_ELM(v, i),
+					&old_bmap, &new_bmap, 0,
+					__ATOMIC_RELEASE, __ATOMIC_RELAXED);
+
+		if (success)
+			__atomic_fetch_add(&v->num_threads,
+						1, __ATOMIC_RELAXED);
+		else if (old_bmap & (1UL << id))
+			/* Someone else registered this thread.
+			 * Counter should not be incremented.
+			 */
+			return 0;
+	} while (success == 0);
+
+	return 0;
+}
+
+/* Remove a reader thread, from the list of threads reporting their
+ * quiescent state on a QS variable.
+ */
+int __rte_experimental
+rte_rcu_qsbr_thread_unregister(struct rte_rcu_qsbr *v, unsigned int thread_id)
+{
+	unsigned int i, id, success;
+	uint64_t old_bmap, new_bmap;
+
+	if (v == NULL || thread_id >= v->max_threads) {
+		rte_log(RTE_LOG_ERR, rcu_log_type,
+			"%s(): Invalid input parameter\n", __func__);
+		rte_errno = EINVAL;
+
+		return 1;
+	}
+
+	id = thread_id & RTE_QSBR_THRID_MASK;
+	i = thread_id >> RTE_QSBR_THRID_INDEX_SHIFT;
+
+	/* Make sure that the counter for registered threads does not
+	 * go out of sync. Hence, additional checks are required.
+	 */
+	/* Check if the thread is already unregistered */
+	old_bmap = __atomic_load_n(RTE_QSBR_THRID_ARRAY_ELM(v, i),
+					__ATOMIC_RELAXED);
+	if (old_bmap & ~(1UL << id))
+		return 0;
+
+	do {
+		new_bmap = old_bmap & ~(1UL << id);
+		/* Make sure any loads of the shared data structure are
+		 * completed before removal of the thread from the list of
+		 * reporting threads.
+		 */
+		success = __atomic_compare_exchange(
+					RTE_QSBR_THRID_ARRAY_ELM(v, i),
+					&old_bmap, &new_bmap, 0,
+					__ATOMIC_RELEASE, __ATOMIC_RELAXED);
+
+		if (success)
+			__atomic_fetch_sub(&v->num_threads,
+						1, __ATOMIC_RELAXED);
+		else if (old_bmap & ~(1UL << id))
+			/* Someone else unregistered this thread.
+			 * Counter should not be incremented.
+			 */
+			return 0;
+	} while (success == 0);
+
+	return 0;
+}
+
+/* Dump the details of a single quiescent state variable to a file. */
+int __rte_experimental
+rte_rcu_qsbr_dump(FILE *f, struct rte_rcu_qsbr *v)
+{
+	uint64_t bmap;
+	uint32_t i, t;
+
+	if (v == NULL || f == NULL) {
+		rte_log(RTE_LOG_ERR, rcu_log_type,
+			"%s(): Invalid input parameter\n", __func__);
+		rte_errno = EINVAL;
+
+		return 1;
+	}
+
+	fprintf(f, "\nQuiescent State Variable @%p\n", v);
+
+	fprintf(f, "  QS variable memory size = %lu\n",
+				rte_rcu_qsbr_get_memsize(v->max_threads));
+	fprintf(f, "  Given # max threads = %u\n", v->max_threads);
+	fprintf(f, "  Current # threads = %u\n", v->num_threads);
+
+	fprintf(f, "  Registered thread ID mask = 0x");
+	for (i = 0; i < v->num_elems; i++)
+		fprintf(f, "%lx", __atomic_load_n(
+					RTE_QSBR_THRID_ARRAY_ELM(v, i),
+					__ATOMIC_ACQUIRE));
+	fprintf(f, "\n");
+
+	fprintf(f, "  Token = %lu\n",
+			__atomic_load_n(&v->token, __ATOMIC_ACQUIRE));
+
+	fprintf(f, "Quiescent State Counts for readers:\n");
+	for (i = 0; i < v->num_elems; i++) {
+		bmap = __atomic_load_n(RTE_QSBR_THRID_ARRAY_ELM(v, i),
+					__ATOMIC_ACQUIRE);
+		while (bmap) {
+			t = __builtin_ctzl(bmap);
+			fprintf(f, "thread ID = %d, count = %lu\n", t,
+				__atomic_load_n(
+					&v->qsbr_cnt[i].cnt,
+					__ATOMIC_RELAXED));
+			bmap &= ~(1UL << t);
+		}
+	}
+
+	return 0;
+}
+
+int rcu_log_type;
+
+RTE_INIT(rte_rcu_register)
+{
+	rcu_log_type = rte_log_register("lib.rcu");
+	if (rcu_log_type >= 0)
+		rte_log_set_level(rcu_log_type, RTE_LOG_ERR);
+}
diff --git a/lib/librte_rcu/rte_rcu_qsbr.h b/lib/librte_rcu/rte_rcu_qsbr.h
new file mode 100644
index 000000000..304534a2d
--- /dev/null
+++ b/lib/librte_rcu/rte_rcu_qsbr.h
@@ -0,0 +1,645 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (c) 2018 Arm Limited
+ */
+
+#ifndef _RTE_RCU_QSBR_H_
+#define _RTE_RCU_QSBR_H_
+
+/**
+ * @file
+ * RTE Quiescent State Based Reclamation (QSBR)
+ *
+ * Quiescent State (QS) is any point in the thread execution
+ * where the thread does not hold a reference to a data structure
+ * in shared memory. While using lock-less data structures, the writer
+ * can safely free memory once all the reader threads have entered
+ * quiescent state.
+ *
+ * This library provides the ability for the readers to report quiescent
+ * state and for the writers to identify when all the readers have
+ * entered quiescent state.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdio.h>
+#include <stdint.h>
+#include <errno.h>
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_atomic.h>
+#define RTE_LIBRTE_RCU_DEBUG
+extern int rcu_log_type;
+
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+#define RCU_DP_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, rcu_log_type, \
+		"%s(): " fmt "\n", __func__, ## args)
+#else
+#define RCU_DP_LOG(level, fmt, args...)
+#endif
+
+/* Registered thread IDs are stored as a bitmap of 64b element array.
+ * Given thread id needs to be converted to index into the array and
+ * the id within the array element.
+ */
+#define RTE_QSBR_THRID_ARRAY_ELM_SIZE (sizeof(uint64_t) * 8)
+#define RTE_QSBR_THRID_ARRAY_SIZE(max_threads) \
+	RTE_ALIGN(RTE_ALIGN_MUL_CEIL(max_threads, \
+		RTE_QSBR_THRID_ARRAY_ELM_SIZE) >> 3, RTE_CACHE_LINE_SIZE)
+#define RTE_QSBR_THRID_ARRAY_ELM(v, i) ((uint64_t *) \
+	((struct rte_rcu_qsbr_cnt *)(v + 1) + v->max_threads) + i)
+#define RTE_QSBR_THRID_INDEX_SHIFT 6
+#define RTE_QSBR_THRID_MASK 0x3f
+#define RTE_QSBR_THRID_INVALID 0xffffffff
+
+/* Worker thread counter */
+struct rte_rcu_qsbr_cnt {
+	uint64_t cnt;
+	/**< Quiescent state counter. Value 0 indicates the thread is offline
+	 *   64b counter is used to avoid adding more code to address
+	 *   counter overflow. Changing this to 32b would require additional
+	 *   changes to various APIs.
+	 */
+	uint32_t lock_cnt;
+	/**< Lock counter. Used when CONFIG_RTE_LIBRTE_RCU_DEBUG is enabled */
+} __rte_cache_aligned;
+
+#define RTE_QSBR_CNT_THR_OFFLINE 0
+#define RTE_QSBR_CNT_INIT 1
+
+/* RTE Quiescent State variable structure.
+ * This structure has two elements that vary in size based on the
+ * 'max_threads' parameter.
+ * 1) Quiescent state counter array
+ * 2) Register thread ID array
+ */
+struct rte_rcu_qsbr {
+	uint64_t token __rte_cache_aligned;
+	/**< Counter to allow for multiple concurrent quiescent state queries */
+
+	uint32_t num_elems __rte_cache_aligned;
+	/**< Number of elements in the thread ID array */
+	uint32_t num_threads;
+	/**< Number of threads currently using this QS variable */
+	uint32_t max_threads;
+	/**< Maximum number of threads using this QS variable */
+
+	struct rte_rcu_qsbr_cnt qsbr_cnt[0] __rte_cache_aligned;
+	/**< Quiescent state counter array of 'max_threads' elements */
+
+	/**< Registered thread IDs are stored in a bitmap array,
+	 *   after the quiescent state counter array.
+	 */
+} __rte_cache_aligned;
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Return the size of the memory occupied by a Quiescent State variable.
+ *
+ * @param max_threads
+ *   Maximum number of threads reporting quiescent state on this variable.
+ * @return
+ *   On success - size of memory in bytes required for this QS variable.
+ *   On error - 1 with error code set in rte_errno.
+ *   Possible rte_errno codes are:
+ *   - EINVAL - max_threads is 0
+ */
+size_t __rte_experimental
+rte_rcu_qsbr_get_memsize(uint32_t max_threads);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Initialize a Quiescent State (QS) variable.
+ *
+ * @param v
+ *   QS variable
+ * @param max_threads
+ *   Maximum number of threads reporting quiescent state on this variable.
+ *   This should be the same value as passed to rte_rcu_qsbr_get_memsize.
+ * @return
+ *   On success - 0
+ *   On error - 1 with error code set in rte_errno.
+ *   Possible rte_errno codes are:
+ *   - EINVAL - max_threads is 0 or 'v' is NULL.
+ *
+ */
+int __rte_experimental
+rte_rcu_qsbr_init(struct rte_rcu_qsbr *v, uint32_t max_threads);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Register a reader thread to report its quiescent state
+ * on a QS variable.
+ *
+ * This is implemented as a lock-free function. It is multi-thread
+ * safe.
+ * Any reader thread that wants to report its quiescent state must
+ * call this API. This can be called during initialization or as part
+ * of the packet processing loop.
+ *
+ * Note that rte_rcu_qsbr_thread_online must be called before the
+ * thread updates its quiescent state using rte_rcu_qsbr_quiescent.
+ *
+ * @param v
+ *   QS variable
+ * @param thread_id
+ *   Reader thread with this thread ID will report its quiescent state on
+ *   the QS variable. thread_id is a value between 0 and (max_threads - 1).
+ *   'max_threads' is the parameter passed in 'rte_rcu_qsbr_init' API.
+ */
+int __rte_experimental
+rte_rcu_qsbr_thread_register(struct rte_rcu_qsbr *v, unsigned int thread_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Remove a reader thread, from the list of threads reporting their
+ * quiescent state on a QS variable.
+ *
+ * This is implemented as a lock-free function. It is multi-thread safe.
+ * This API can be called from the reader threads during shutdown.
+ * Ongoing quiescent state queries will stop waiting for the status from this
+ * unregistered reader thread.
+ *
+ * @param v
+ *   QS variable
+ * @param thread_id
+ *   Reader thread with this thread ID will stop reporting its quiescent
+ *   state on the QS variable.
+ */
+int __rte_experimental
+rte_rcu_qsbr_thread_unregister(struct rte_rcu_qsbr *v, unsigned int thread_id);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Add a registered reader thread, to the list of threads reporting their
+ * quiescent state on a QS variable.
+ *
+ * This is implemented as a lock-free function. It is multi-thread
+ * safe.
+ *
+ * Any registered reader thread that wants to report its quiescent state must
+ * call this API before calling rte_rcu_qsbr_quiescent. This can be called
+ * during initialization or as part of the packet processing loop.
+ *
+ * The reader thread must call rte_rcu_thread_offline API, before
+ * calling any functions that block, to ensure that rte_rcu_qsbr_check
+ * API does not wait indefinitely for the reader thread to update its QS.
+ *
+ * The reader thread must call rte_rcu_thread_online API, after the blocking
+ * function call returns, to ensure that rte_rcu_qsbr_check API
+ * waits for the reader thread to update its quiescent state.
+ *
+ * @param v
+ *   QS variable
+ * @param thread_id
+ *   Reader thread with this thread ID will report its quiescent state on
+ *   the QS variable.
+ */
+static __rte_always_inline void __rte_experimental
+rte_rcu_qsbr_thread_online(struct rte_rcu_qsbr *v, unsigned int thread_id)
+{
+	uint64_t t;
+
+	RTE_ASSERT(v != NULL && thread_id < v->max_threads);
+
+	/* Copy the current value of token.
+	 * The fence at the end of the function will ensure that
+	 * the following will not move down after the load of any shared
+	 * data structure.
+	 */
+	t = __atomic_load_n(&v->token, __ATOMIC_RELAXED);
+
+	/* __atomic_store_n(cnt, __ATOMIC_RELAXED) is used to ensure
+	 * 'cnt' (64b) is accessed atomically.
+	 */
+	__atomic_store_n(&v->qsbr_cnt[thread_id].cnt,
+		t, __ATOMIC_RELAXED);
+
+	/* The subsequent load of the data structure should not
+	 * move above the store. Hence a store-load barrier
+	 * is required.
+	 * If the load of the data structure moves above the store,
+	 * writer might not see that the reader is online, even though
+	 * the reader is referencing the shared data structure.
+	 */
+#ifdef RTE_ARCH_X86_64
+	/* rte_smp_mb() for x86 is lighter */
+	rte_smp_mb();
+#else
+	__atomic_thread_fence(__ATOMIC_SEQ_CST);
+#endif
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Remove a registered reader thread from the list of threads reporting their
+ * quiescent state on a QS variable.
+ *
+ * This is implemented as a lock-free function. It is multi-thread
+ * safe.
+ *
+ * This can be called during initialization or as part of the packet
+ * processing loop.
+ *
+ * The reader thread must call rte_rcu_thread_offline API, before
+ * calling any functions that block, to ensure that rte_rcu_qsbr_check
+ * API does not wait indefinitely for the reader thread to update its QS.
+ *
+ * @param v
+ *   QS variable
+ * @param thread_id
+ *   rte_rcu_qsbr_check API will not wait for the reader thread with
+ *   this thread ID to report its quiescent state on the QS variable.
+ */
+static __rte_always_inline void __rte_experimental
+rte_rcu_qsbr_thread_offline(struct rte_rcu_qsbr *v, unsigned int thread_id)
+{
+	RTE_ASSERT(v != NULL && thread_id < v->max_threads);
+
+	/* The reader can go offline only after the load of the
+	 * data structure is completed. i.e. any load of the
+	 * data strcture can not move after this store.
+	 */
+
+	__atomic_store_n(&v->qsbr_cnt[thread_id].cnt,
+		RTE_QSBR_CNT_THR_OFFLINE, __ATOMIC_RELEASE);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Acquire a lock for accessing a shared data structure.
+ *
+ * This is implemented as a lock-free function. It is multi-thread
+ * safe.
+ *
+ * This API is provided to aid debugging. This should be called before
+ * accessing a shared data structure.
+ *
+ * When CONFIG_RTE_LIBRTE_RCU_DEBUG is enabled a lock counter is incremented.
+ * Similarly rte_rcu_qsbr_unlock will decrement the counter. When the
+ * rte_rcu_qsbr_check API will verify that this counter is 0.
+ *
+ * When CONFIG_RTE_LIBRTE_RCU_DEBUG is disabled, this API will do nothing.
+ *
+ * @param v
+ *   QS variable
+ * @param thread_id
+ *   Reader thread id
+ */
+static __rte_always_inline void __rte_experimental
+rte_rcu_qsbr_lock(struct rte_rcu_qsbr *v __rte_unused,
+			unsigned int thread_id __rte_unused)
+{
+#if defined(RTE_LIBRTE_RCU_DEBUG)
+	RTE_ASSERT(v != NULL && thread_id < v->max_threads);
+
+	/* Increment the lock counter */
+	__atomic_fetch_add(&v->qsbr_cnt[thread_id].lock_cnt,
+				1, __ATOMIC_ACQUIRE);
+#endif
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Release a lock after accessing a shared data structure.
+ *
+ * This is implemented as a lock-free function. It is multi-thread
+ * safe.
+ *
+ * This API is provided to aid debugging. This should be called after
+ * accessing a shared data structure.
+ *
+ * When CONFIG_RTE_LIBRTE_RCU_DEBUG is enabled, rte_rcu_qsbr_unlock will
+ * decrement a lock counter. rte_rcu_qsbr_check API will verify that this
+ * counter is 0.
+ *
+ * When CONFIG_RTE_LIBRTE_RCU_DEBUG is disabled, this API will do nothing.
+ *
+ * @param v
+ *   QS variable
+ * @param thread_id
+ *   Reader thread id
+ */
+static __rte_always_inline void __rte_experimental
+rte_rcu_qsbr_unlock(struct rte_rcu_qsbr *v __rte_unused,
+			unsigned int thread_id __rte_unused)
+{
+#if defined(RTE_LIBRTE_RCU_DEBUG)
+	RTE_ASSERT(v != NULL && thread_id < v->max_threads);
+
+	/* Decrement the lock counter */
+	__atomic_fetch_sub(&v->qsbr_cnt[thread_id].lock_cnt,
+				1, __ATOMIC_RELEASE);
+
+	if (v->qsbr_cnt[thread_id].lock_cnt)
+		rte_log(RTE_LOG_WARNING, rcu_log_type,
+			"%s(): Lock counter %u. Nested locks?\n",
+			__func__, v->qsbr_cnt[thread_id].lock_cnt);
+#endif
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Ask the reader threads to report the quiescent state
+ * status.
+ *
+ * This is implemented as a lock-free function. It is multi-thread
+ * safe and can be called from worker threads.
+ *
+ * @param v
+ *   QS variable
+ * @return
+ *   - This is the token for this call of the API. This should be
+ *     passed to rte_rcu_qsbr_check API.
+ */
+static __rte_always_inline uint64_t __rte_experimental
+rte_rcu_qsbr_start(struct rte_rcu_qsbr *v)
+{
+	uint64_t t;
+
+	RTE_ASSERT(v != NULL);
+
+	/* Release the changes to the shared data structure.
+	 * This store release will ensure that changes to any data
+	 * structure are visible to the workers before the token
+	 * update is visible.
+	 */
+	t = __atomic_add_fetch(&v->token, 1, __ATOMIC_RELEASE);
+
+	return t;
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Update quiescent state for a reader thread.
+ *
+ * This is implemented as a lock-free function. It is multi-thread safe.
+ * All the reader threads registered to report their quiescent state
+ * on the QS variable must call this API.
+ *
+ * @param v
+ *   QS variable
+ * @param thread_id
+ *   Update the quiescent state for the reader with this thread ID.
+ */
+static __rte_always_inline void __rte_experimental
+rte_rcu_qsbr_quiescent(struct rte_rcu_qsbr *v, unsigned int thread_id)
+{
+	uint64_t t;
+
+	RTE_ASSERT(v != NULL && thread_id < v->max_threads);
+
+#if defined(RTE_LIBRTE_RCU_DEBUG)
+	/* Validate that the lock counter is 0 */
+	if (v->qsbr_cnt[thread_id].lock_cnt)
+		rte_log(RTE_LOG_ERR, rcu_log_type,
+			"%s(): Lock counter %u, should be 0\n",
+			__func__, v->qsbr_cnt[thread_id].lock_cnt);
+#endif
+
+	/* Acquire the changes to the shared data structure released
+	 * by rte_rcu_qsbr_start.
+	 * Later loads of the shared data structure should not move
+	 * above this load. Hence, use load-acquire.
+	 */
+	t = __atomic_load_n(&v->token, __ATOMIC_ACQUIRE);
+
+	/* Inform the writer that updates are visible to this reader.
+	 * Prior loads of the shared data structure should not move
+	 * beyond this store. Hence use store-release.
+	 */
+	__atomic_store_n(&v->qsbr_cnt[thread_id].cnt,
+			 t, __ATOMIC_RELEASE);
+
+	RCU_DP_LOG(DEBUG, "%s: update: token = %lu, Thread ID = %d",
+		__func__, t, thread_id);
+}
+
+/* Check the quiescent state counter for registered threads only, assuming
+ * that not all threads have registered.
+ */
+static __rte_always_inline int
+__rcu_qsbr_check_selective(struct rte_rcu_qsbr *v, uint64_t t, bool wait)
+{
+	uint32_t i, j, id;
+	uint64_t bmap;
+	uint64_t c;
+	uint64_t *reg_thread_id;
+
+	for (i = 0, reg_thread_id = RTE_QSBR_THRID_ARRAY_ELM(v, 0);
+		i < v->num_elems;
+		i++, reg_thread_id++) {
+		/* Load the current registered thread bit map before
+		 * loading the reader thread quiescent state counters.
+		 */
+		bmap = __atomic_load_n(reg_thread_id, __ATOMIC_ACQUIRE);
+		id = i << RTE_QSBR_THRID_INDEX_SHIFT;
+
+		while (bmap) {
+			j = __builtin_ctzl(bmap);
+			RCU_DP_LOG(DEBUG,
+				"%s: check: token = %lu, wait = %d, Bit Map = 0x%lx, Thread ID = %d",
+				__func__, t, wait, bmap, id + j);
+			c = __atomic_load_n(
+					&v->qsbr_cnt[id + j].cnt,
+					__ATOMIC_ACQUIRE);
+			RCU_DP_LOG(DEBUG,
+				"%s: status: token = %lu, wait = %d, Thread QS cnt = %lu, Thread ID = %d",
+				__func__, t, wait, c, id+j);
+			/* Counter is not checked for wrap-around condition
+			 * as it is a 64b counter.
+			 */
+			if (unlikely(c != RTE_QSBR_CNT_THR_OFFLINE && c < t)) {
+				/* This thread is not in quiescent state */
+				if (!wait)
+					return 0;
+
+				rte_pause();
+				/* This thread might have unregistered.
+				 * Re-read the bitmap.
+				 */
+				bmap = __atomic_load_n(reg_thread_id,
+						__ATOMIC_ACQUIRE);
+
+				continue;
+			}
+
+			bmap &= ~(1UL << j);
+		}
+	}
+
+	return 1;
+}
+
+/* Check the quiescent state counter for all threads, assuming that
+ * all the threads have registered.
+ */
+static __rte_always_inline int
+__rcu_qsbr_check_all(struct rte_rcu_qsbr *v, uint64_t t, bool wait)
+{
+	uint32_t i;
+	struct rte_rcu_qsbr_cnt *cnt;
+	uint64_t c;
+
+	for (i = 0, cnt = v->qsbr_cnt; i < v->max_threads; i++, cnt++) {
+		RCU_DP_LOG(DEBUG,
+			"%s: check: token = %lu, wait = %d, Thread ID = %d",
+			__func__, t, wait, i);
+		while (1) {
+			c = __atomic_load_n(&cnt->cnt, __ATOMIC_ACQUIRE);
+			RCU_DP_LOG(DEBUG,
+				"%s: status: token = %lu, wait = %d, Thread QS cnt = %lu, Thread ID = %d",
+				__func__, t, wait, c, i);
+			/* Counter is not checked for wrap-around condition
+			 * as it is a 64b counter.
+			 */
+			if (likely(c == RTE_QSBR_CNT_THR_OFFLINE || c >= t))
+				break;
+
+			/* This thread is not in quiescent state */
+			if (!wait)
+				return 0;
+
+			rte_pause();
+		}
+	}
+
+	return 1;
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Checks if all the reader threads have entered the quiescent state
+ * referenced by token.
+ *
+ * This is implemented as a lock-free function. It is multi-thread
+ * safe and can be called from the worker threads as well.
+ *
+ * If this API is called with 'wait' set to true, the following
+ * factors must be considered:
+ *
+ * 1) If the calling thread is also reporting the status on the
+ * same QS variable, it must update the quiescent state status, before
+ * calling this API.
+ *
+ * 2) In addition, while calling from multiple threads, only
+ * one of those threads can be reporting the quiescent state status
+ * on a given QS variable.
+ *
+ * @param v
+ *   QS variable
+ * @param t
+ *   Token returned by rte_rcu_qsbr_start API
+ * @param wait
+ *   If true, block till all the reader threads have completed entering
+ *   the quiescent state referenced by token 't'.
+ * @return
+ *   - 0 if all reader threads have NOT passed through specified number
+ *     of quiescent states.
+ *   - 1 if all reader threads have passed through specified number
+ *     of quiescent states.
+ */
+static __rte_always_inline int __rte_experimental
+rte_rcu_qsbr_check(struct rte_rcu_qsbr *v, uint64_t t, bool wait)
+{
+	RTE_ASSERT(v != NULL);
+
+	if (likely(v->num_threads == v->max_threads))
+		return __rcu_qsbr_check_all(v, t, wait);
+	else
+		return __rcu_qsbr_check_selective(v, t, wait);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Wait till the reader threads have entered quiescent state.
+ *
+ * This is implemented as a lock-free function. It is multi-thread safe.
+ * This API can be thought of as a wrapper around rte_rcu_qsbr_start and
+ * rte_rcu_qsbr_check APIs.
+ *
+ * If this API is called from multiple threads, only one of
+ * those threads can be reporting the quiescent state status on a
+ * given QS variable.
+ *
+ * @param v
+ *   QS variable
+ * @param thread_id
+ *   Thread ID of the caller if it is registered to report quiescent state
+ *   on this QS variable (i.e. the calling thread is also part of the
+ *   readside critical section). If not, pass RTE_QSBR_THRID_INVALID.
+ */
+static __rte_always_inline void __rte_experimental
+rte_rcu_qsbr_synchronize(struct rte_rcu_qsbr *v, unsigned int thread_id)
+{
+	uint64_t t;
+
+	RTE_ASSERT(v != NULL);
+
+	t = rte_rcu_qsbr_start(v);
+
+	/* If the current thread has readside critical section,
+	 * update its quiescent state status.
+	 */
+	if (thread_id != RTE_QSBR_THRID_INVALID)
+		rte_rcu_qsbr_quiescent(v, thread_id);
+
+	/* Wait for other readers to enter quiescent state */
+	rte_rcu_qsbr_check(v, t, true);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Dump the details of a single QS variables to a file.
+ *
+ * It is NOT multi-thread safe.
+ *
+ * @param f
+ *   A pointer to a file for output
+ * @param v
+ *   QS variable
+ * @return
+ *   On success - 0
+ *   On error - 1 with error code set in rte_errno.
+ *   Possible rte_errno codes are:
+ *   - EINVAL - NULL parameters are passed
+ */
+int __rte_experimental
+rte_rcu_qsbr_dump(FILE *f, struct rte_rcu_qsbr *v);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_RCU_QSBR_H_ */
diff --git a/lib/librte_rcu/rte_rcu_version.map b/lib/librte_rcu/rte_rcu_version.map
new file mode 100644
index 000000000..ad8cb517c
--- /dev/null
+++ b/lib/librte_rcu/rte_rcu_version.map
@@ -0,0 +1,11 @@
+EXPERIMENTAL {
+	global:
+
+	rte_rcu_qsbr_get_memsize;
+	rte_rcu_qsbr_init;
+	rte_rcu_qsbr_thread_register;
+	rte_rcu_qsbr_thread_unregister;
+	rte_rcu_qsbr_dump;
+
+	local: *;
+};
diff --git a/lib/meson.build b/lib/meson.build
index 595314d7d..67be10659 100644
--- a/lib/meson.build
+++ b/lib/meson.build
@@ -22,7 +22,7 @@ libraries = [
 	'gro', 'gso', 'ip_frag', 'jobstats',
 	'kni', 'latencystats', 'lpm', 'member',
 	'power', 'pdump', 'rawdev',
-	'reorder', 'sched', 'security', 'stack', 'vhost',
+	'reorder', 'sched', 'security', 'stack', 'vhost', 'rcu',
 	#ipsec lib depends on crypto and security
 	'ipsec',
 	# add pkt framework libs which use other libs from above
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 7d994bece..e93cc366d 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -97,6 +97,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
 _LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED)          += -lrte_sched
+_LDLIBS-$(CONFIG_RTE_LIBRTE_RCU)            += -lrte_rcu
 
 ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
 _LDLIBS-$(CONFIG_RTE_LIBRTE_KNI)            += -lrte_kni
-- 
2.17.1

  parent reply	other threads:[~2019-04-12 20:20 UTC|newest]

Thread overview: 260+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-22  3:30 [dpdk-dev] [RFC 0/3] tqs: add thread quiescent state library Honnappa Nagarahalli
2018-11-22  3:30 ` [dpdk-dev] [RFC 1/3] log: add TQS log type Honnappa Nagarahalli
2018-11-27 22:24   ` Stephen Hemminger
2018-11-28  5:58     ` Honnappa Nagarahalli
2018-11-22  3:30 ` [dpdk-dev] [RFC 2/3] tqs: add thread quiescent state library Honnappa Nagarahalli
2018-11-24 12:18   ` Ananyev, Konstantin
2018-11-27 21:32     ` Honnappa Nagarahalli
2018-11-28 15:25       ` Ananyev, Konstantin
2018-12-07  7:27         ` Honnappa Nagarahalli
2018-12-07 17:29           ` Stephen Hemminger
2018-12-11  6:40             ` Honnappa Nagarahalli
2018-12-13 12:26               ` Burakov, Anatoly
2018-12-18  4:30                 ` Honnappa Nagarahalli
2018-12-18  6:31                   ` Stephen Hemminger
2018-12-12  9:29           ` Ananyev, Konstantin
2018-12-13  7:39             ` Honnappa Nagarahalli
2018-12-17 13:14               ` Ananyev, Konstantin
2018-11-22  3:30 ` [dpdk-dev] [RFC 3/3] test/tqs: Add API and functional tests Honnappa Nagarahalli
     [not found] ` <CGME20181122073110eucas1p17592400af6c0b807dc87e90d136575af@eucas1p1.samsung.com>
2018-11-22  7:31   ` [dpdk-dev] [RFC 0/3] tqs: add thread quiescent state library Ilya Maximets
2018-11-27 22:28 ` Stephen Hemminger
2018-11-27 22:49   ` Van Haaren, Harry
2018-11-28  5:31     ` Honnappa Nagarahalli
2018-11-28 23:23       ` Stephen Hemminger
2018-11-30  2:13         ` Honnappa Nagarahalli
2018-11-30 16:26           ` Luca Boccassi
2018-11-30 18:32             ` Stephen Hemminger
2018-11-30 20:20             ` Honnappa Nagarahalli
2018-11-30 20:56           ` Mattias Rönnblom
2018-11-30 23:44             ` Stephen Hemminger
2018-12-01 18:37               ` Honnappa Nagarahalli
2018-11-30  2:25     ` Honnappa Nagarahalli
2018-11-30 21:03       ` Mattias Rönnblom
2018-12-22  2:14 ` [dpdk-dev] [RFC v2 0/2] rcu: add RCU library supporting QSBR mechanism Honnappa Nagarahalli
2018-12-22  2:14   ` [dpdk-dev] [RFC v2 1/2] " Honnappa Nagarahalli
2019-01-15 11:39     ` Ananyev, Konstantin
2019-01-15 20:43       ` Honnappa Nagarahalli
2019-01-16 15:56         ` Ananyev, Konstantin
2019-01-18  6:48           ` Honnappa Nagarahalli
2019-01-18 12:14             ` Ananyev, Konstantin
2019-01-24 17:15               ` Honnappa Nagarahalli
2019-01-24 18:05                 ` Ananyev, Konstantin
2019-02-22  7:07                   ` Honnappa Nagarahalli
2018-12-22  2:14   ` [dpdk-dev] [RFC v2 2/2] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2018-12-23  7:30     ` Stephen Hemminger
2018-12-23 16:25       ` Paul E. McKenney
2019-01-18  7:04         ` Honnappa Nagarahalli
2019-02-22  7:04   ` [dpdk-dev] [RFC v3 0/5] rcu: add RCU library supporting QSBR mechanism Honnappa Nagarahalli
2019-02-22  7:04     ` [dpdk-dev] [RFC v3 1/5] " Honnappa Nagarahalli
2019-02-22  7:04     ` [dpdk-dev] [RFC v3 2/5] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-02-22  7:04     ` [dpdk-dev] [RFC v3 3/5] lib/rcu: add dynamic memory allocation capability Honnappa Nagarahalli
2019-02-22  7:04     ` [dpdk-dev] [RFC v3 4/5] test/rcu_qsbr: modify test cases for dynamic memory allocation Honnappa Nagarahalli
2019-02-22  7:04     ` [dpdk-dev] [RFC v3 5/5] lib/rcu: fix the size of register thread ID array size Honnappa Nagarahalli
2019-03-19  4:52 ` [dpdk-dev] [PATCH 0/3] lib/rcu: add RCU library supporting QSBR mechanism Honnappa Nagarahalli
2019-03-19  4:52   ` Honnappa Nagarahalli
2019-03-19  4:52   ` [dpdk-dev] [PATCH 1/3] rcu: " Honnappa Nagarahalli
2019-03-19  4:52     ` Honnappa Nagarahalli
2019-03-22 16:42     ` Ananyev, Konstantin
2019-03-22 16:42       ` Ananyev, Konstantin
2019-03-26  4:35       ` Honnappa Nagarahalli
2019-03-26  4:35         ` Honnappa Nagarahalli
2019-03-28 11:15         ` Ananyev, Konstantin
2019-03-28 11:15           ` Ananyev, Konstantin
2019-03-29  5:54           ` Honnappa Nagarahalli
2019-03-29  5:54             ` Honnappa Nagarahalli
2019-03-19  4:52   ` [dpdk-dev] [PATCH 2/3] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-03-19  4:52     ` Honnappa Nagarahalli
2019-03-19  4:52   ` [dpdk-dev] [PATCH 3/3] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-03-19  4:52     ` Honnappa Nagarahalli
2019-03-25 11:34     ` Kovacevic, Marko
2019-03-25 11:34       ` Kovacevic, Marko
2019-03-26  4:43       ` Honnappa Nagarahalli
2019-03-26  4:43         ` Honnappa Nagarahalli
2019-03-27  5:52 ` [dpdk-dev] [PATCH v2 0/3] lib/rcu: add RCU library supporting QSBR mechanism Honnappa Nagarahalli
2019-03-27  5:52   ` Honnappa Nagarahalli
2019-03-27  5:52   ` [dpdk-dev] [PATCH v2 1/3] rcu: " Honnappa Nagarahalli
2019-03-27  5:52     ` Honnappa Nagarahalli
2019-03-27  5:52   ` [dpdk-dev] [PATCH v2 2/3] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-03-27  5:52     ` Honnappa Nagarahalli
2019-03-27  5:52   ` [dpdk-dev] [PATCH v2 3/3] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-03-27  5:52     ` Honnappa Nagarahalli
2019-04-01 17:10 ` [dpdk-dev] [PATCH v3 0/3] lib/rcu: add RCU library supporting QSBR mechanism Honnappa Nagarahalli
2019-04-01 17:10   ` Honnappa Nagarahalli
2019-04-01 17:11   ` [dpdk-dev] [PATCH v3 1/3] rcu: " Honnappa Nagarahalli
2019-04-01 17:11     ` Honnappa Nagarahalli
2019-04-02 10:22     ` Ananyev, Konstantin
2019-04-02 10:22       ` Ananyev, Konstantin
2019-04-02 10:53       ` Ananyev, Konstantin
2019-04-02 10:53         ` Ananyev, Konstantin
2019-04-01 17:11   ` [dpdk-dev] [PATCH v3 2/3] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-04-01 17:11     ` Honnappa Nagarahalli
2019-04-02 10:55     ` Ananyev, Konstantin
2019-04-02 10:55       ` Ananyev, Konstantin
2019-04-01 17:11   ` [dpdk-dev] [PATCH v3 3/3] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-04-01 17:11     ` Honnappa Nagarahalli
2019-04-10 11:20 ` [dpdk-dev] [PATCH v4 0/3] lib/rcu: add RCU library supporting QSBR mechanism Honnappa Nagarahalli
2019-04-10 11:20   ` Honnappa Nagarahalli
2019-04-10 11:20   ` [dpdk-dev] [PATCH v4 1/3] rcu: " Honnappa Nagarahalli
2019-04-10 11:20     ` Honnappa Nagarahalli
2019-04-10 18:14     ` Paul E. McKenney
2019-04-10 18:14       ` Paul E. McKenney
2019-04-11  4:35       ` Honnappa Nagarahalli
2019-04-11  4:35         ` Honnappa Nagarahalli
2019-04-11 15:26         ` Paul E. McKenney
2019-04-11 15:26           ` Paul E. McKenney
2019-04-12 20:21           ` Honnappa Nagarahalli
2019-04-12 20:21             ` Honnappa Nagarahalli
2019-04-15 16:51             ` Ananyev, Konstantin
2019-04-15 16:51               ` Ananyev, Konstantin
2019-04-15 19:46               ` Honnappa Nagarahalli
2019-04-15 19:46                 ` Honnappa Nagarahalli
2019-04-10 11:20   ` [dpdk-dev] [PATCH v4 2/3] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-04-10 11:20     ` Honnappa Nagarahalli
2019-04-10 15:26     ` Stephen Hemminger
2019-04-10 15:26       ` Stephen Hemminger
2019-04-10 16:15       ` Honnappa Nagarahalli
2019-04-10 16:15         ` Honnappa Nagarahalli
2019-04-10 11:20   ` [dpdk-dev] [PATCH v4 3/3] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-04-10 11:20     ` Honnappa Nagarahalli
2019-04-12 20:20 ` [dpdk-dev] [PATCH v5 0/3] lib/rcu: add RCU library supporting QSBR mechanism Honnappa Nagarahalli
2019-04-12 20:20   ` Honnappa Nagarahalli
2019-04-12 20:20   ` Honnappa Nagarahalli [this message]
2019-04-12 20:20     ` [dpdk-dev] [PATCH v5 1/3] rcu: " Honnappa Nagarahalli
2019-04-12 22:06     ` Stephen Hemminger
2019-04-12 22:06       ` Stephen Hemminger
2019-04-12 22:24       ` Honnappa Nagarahalli
2019-04-12 22:24         ` Honnappa Nagarahalli
2019-04-12 23:06         ` Stephen Hemminger
2019-04-12 23:06           ` Stephen Hemminger
2019-04-15 12:24           ` Ananyev, Konstantin
2019-04-15 12:24             ` Ananyev, Konstantin
2019-04-15 15:38             ` Stephen Hemminger
2019-04-15 15:38               ` Stephen Hemminger
2019-04-15 17:39               ` Ananyev, Konstantin
2019-04-15 17:39                 ` Ananyev, Konstantin
2019-04-15 18:56                 ` Honnappa Nagarahalli
2019-04-15 18:56                   ` Honnappa Nagarahalli
2019-04-15 21:26                 ` Stephen Hemminger
2019-04-15 21:26                   ` Stephen Hemminger
2019-04-16  5:29                   ` Honnappa Nagarahalli
2019-04-16  5:29                     ` Honnappa Nagarahalli
2019-04-16 14:54                     ` Stephen Hemminger
2019-04-16 14:54                       ` Stephen Hemminger
2019-04-16 16:56                       ` Honnappa Nagarahalli
2019-04-16 16:56                         ` Honnappa Nagarahalli
2019-04-16 21:22                         ` Stephen Hemminger
2019-04-16 21:22                           ` Stephen Hemminger
2019-04-17  1:45                           ` Honnappa Nagarahalli
2019-04-17  1:45                             ` Honnappa Nagarahalli
2019-04-17 13:39                             ` Ananyev, Konstantin
2019-04-17 13:39                               ` Ananyev, Konstantin
2019-04-17 14:02                               ` Honnappa Nagarahalli
2019-04-17 14:02                                 ` Honnappa Nagarahalli
2019-04-17 14:18                               ` Thomas Monjalon
2019-04-17 14:18                                 ` Thomas Monjalon
2019-04-12 20:20   ` [dpdk-dev] [PATCH v5 2/3] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-04-12 20:20     ` Honnappa Nagarahalli
2019-04-12 20:20   ` [dpdk-dev] [PATCH v5 3/3] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-04-12 20:20     ` Honnappa Nagarahalli
2019-04-15 17:29   ` [dpdk-dev] [PATCH v5 0/3] lib/rcu: add RCU library supporting QSBR mechanism Ananyev, Konstantin
2019-04-15 17:29     ` Ananyev, Konstantin
2019-04-16  5:10     ` Honnappa Nagarahalli
2019-04-16  5:10       ` Honnappa Nagarahalli
2019-04-17  4:13 ` [dpdk-dev] [PATCH v6 " Honnappa Nagarahalli
2019-04-17  4:13   ` Honnappa Nagarahalli
2019-04-17  4:13   ` [dpdk-dev] [PATCH v6 1/3] rcu: " Honnappa Nagarahalli
2019-04-17  4:13     ` Honnappa Nagarahalli
2019-04-19 19:19     ` Paul E. McKenney
2019-04-19 19:19       ` Paul E. McKenney
2019-04-23  1:08       ` Honnappa Nagarahalli
2019-04-23  1:08         ` Honnappa Nagarahalli
2019-04-17  4:13   ` [dpdk-dev] [PATCH v6 2/3] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-04-17  4:13     ` Honnappa Nagarahalli
2019-04-17  4:13   ` [dpdk-dev] [PATCH v6 3/3] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-04-17  4:13     ` Honnappa Nagarahalli
2019-04-21 16:40   ` [dpdk-dev] [PATCH v6 0/3] lib/rcu: add RCU library supporting QSBR mechanism Thomas Monjalon
2019-04-21 16:40     ` Thomas Monjalon
2019-04-25 14:18     ` Honnappa Nagarahalli
2019-04-25 14:18       ` Honnappa Nagarahalli
2019-04-25 14:27       ` Honnappa Nagarahalli
2019-04-25 14:27         ` Honnappa Nagarahalli
2019-04-25 14:38       ` David Marchand
2019-04-25 14:38         ` David Marchand
2019-04-23  4:31 ` [dpdk-dev] [PATCH v7 " Honnappa Nagarahalli
2019-04-23  4:31   ` Honnappa Nagarahalli
2019-04-23  4:31   ` [dpdk-dev] [PATCH v7 1/3] rcu: " Honnappa Nagarahalli
2019-04-23  4:31     ` Honnappa Nagarahalli
2019-04-23  8:10     ` Paul E. McKenney
2019-04-23  8:10       ` Paul E. McKenney
2019-04-23 21:23       ` Honnappa Nagarahalli
2019-04-23 21:23         ` Honnappa Nagarahalli
2019-04-24 20:02         ` Jerin Jacob Kollanukkaran
2019-04-24 20:02           ` Jerin Jacob Kollanukkaran
2019-04-25  5:15           ` Honnappa Nagarahalli
2019-04-25  5:15             ` Honnappa Nagarahalli
2019-04-24 10:03     ` Ruifeng Wang (Arm Technology China)
2019-04-24 10:03       ` Ruifeng Wang (Arm Technology China)
2019-04-23  4:31   ` [dpdk-dev] [PATCH v7 2/3] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-04-23  4:31     ` Honnappa Nagarahalli
2019-04-23  4:31   ` [dpdk-dev] [PATCH v7 3/3] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-04-23  4:31     ` Honnappa Nagarahalli
2019-04-24 10:12     ` Ruifeng Wang (Arm Technology China)
2019-04-24 10:12       ` Ruifeng Wang (Arm Technology China)
2019-04-26  4:39 ` [dpdk-dev] [PATCH v8 0/4] lib/rcu: add RCU library supporting QSBR mechanism Honnappa Nagarahalli
2019-04-26  4:39   ` Honnappa Nagarahalli
2019-04-26  4:39   ` [dpdk-dev] [PATCH v8 1/4] rcu: " Honnappa Nagarahalli
2019-04-26  4:39     ` Honnappa Nagarahalli
2019-04-26  8:13     ` Jerin Jacob Kollanukkaran
2019-04-26  8:13       ` Jerin Jacob Kollanukkaran
2019-04-28  3:25     ` Ruifeng Wang (Arm Technology China)
2019-04-28  3:25       ` Ruifeng Wang (Arm Technology China)
2019-04-29 20:33       ` Thomas Monjalon
2019-04-29 20:33         ` Thomas Monjalon
2019-04-30 10:51         ` Hemant Agrawal
2019-04-30 10:51           ` Hemant Agrawal
2019-04-26  4:39   ` [dpdk-dev] [PATCH v8 2/4] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-04-26  4:39     ` Honnappa Nagarahalli
2019-04-29 20:35     ` Thomas Monjalon
2019-04-29 20:35       ` Thomas Monjalon
2019-04-30  4:20       ` Honnappa Nagarahalli
2019-04-30  4:20         ` Honnappa Nagarahalli
2019-04-30  7:58         ` Thomas Monjalon
2019-04-30  7:58           ` Thomas Monjalon
2019-04-26  4:39   ` [dpdk-dev] [PATCH v8 3/4] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-04-26  4:39     ` Honnappa Nagarahalli
2019-04-26  4:40   ` [dpdk-dev] [PATCH v8 4/4] doc: added RCU to the release notes Honnappa Nagarahalli
2019-04-26  4:40     ` Honnappa Nagarahalli
2019-04-26 12:04   ` [dpdk-dev] [PATCH v8 0/4] lib/rcu: add RCU library supporting QSBR mechanism Ananyev, Konstantin
2019-04-26 12:04     ` Ananyev, Konstantin
2019-05-01  3:54 ` [dpdk-dev] [PATCH v9 " Honnappa Nagarahalli
2019-05-01  3:54   ` Honnappa Nagarahalli
2019-05-01  3:54   ` [dpdk-dev] [PATCH v9 1/4] rcu: " Honnappa Nagarahalli
2019-05-01  3:54     ` Honnappa Nagarahalli
2019-05-01  3:54   ` [dpdk-dev] [PATCH v9 2/4] test/rcu_qsbr: add API and functional tests Honnappa Nagarahalli
2019-05-01  3:54     ` Honnappa Nagarahalli
2019-05-03 14:31     ` David Marchand
2019-05-03 14:31       ` David Marchand
2019-05-06 23:16       ` Honnappa Nagarahalli
2019-05-06 23:16         ` Honnappa Nagarahalli
2019-05-01  3:54   ` [dpdk-dev] [PATCH v9 3/4] doc/rcu: add lib_rcu documentation Honnappa Nagarahalli
2019-05-01  3:54     ` Honnappa Nagarahalli
2019-05-01 11:37     ` Mcnamara, John
2019-05-01 11:37       ` Mcnamara, John
2019-05-01 21:20       ` Honnappa Nagarahalli
2019-05-01 21:20         ` Honnappa Nagarahalli
2019-05-01 21:32         ` Thomas Monjalon
2019-05-01 21:32           ` Thomas Monjalon
2019-05-01  3:54   ` [dpdk-dev] [PATCH v9 4/4] doc: added RCU to the release notes Honnappa Nagarahalli
2019-05-01  3:54     ` Honnappa Nagarahalli
2019-05-01 11:31     ` Mcnamara, John
2019-05-01 11:31       ` Mcnamara, John
2019-05-01 12:15   ` [dpdk-dev] [PATCH v9 0/4] lib/rcu: add RCU library supporting QSBR mechanism Neil Horman
2019-05-01 12:15     ` Neil Horman
2019-05-01 14:56     ` Honnappa Nagarahalli
2019-05-01 14:56       ` Honnappa Nagarahalli
2019-05-01 18:05       ` Neil Horman
2019-05-01 18:05         ` Neil Horman
2019-05-01 21:18         ` Honnappa Nagarahalli
2019-05-01 21:18           ` Honnappa Nagarahalli
2019-05-01 23:36   ` Thomas Monjalon
2019-05-01 23:36     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190412202039.46902-2-honnappa.nagarahalli@arm.com \
    --to=honnappa.nagarahalli@arm.com \
    --cc=dev@dpdk.org \
    --cc=dharmik.thakkar@arm.com \
    --cc=gavin.hu@arm.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=malvika.gupta@arm.com \
    --cc=marko.kovacevic@intel.com \
    --cc=paulmck@linux.ibm.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).