DPDK patches and discussions
 help / color / mirror / Atom feed
From: Adrien Mazarguil <adrien.mazarguil@6wind.com>
To: Matan Azrad <matan@mellanox.com>, Shahaf Shuler <shahafs@mellanox.com>
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] net/mlx4: add support for multicast address list interface
Date: Thu, 18 Apr 2019 15:10:34 +0200	[thread overview]
Message-ID: <20190418130245.25618-1-adrien.mazarguil@6wind.com> (raw)

Since this driver does not distinguish unicast/multicast addresses,
applications could always rely on the standard MAC add/remove/set interface
to configure both types.

As a result, the multicast address list interface never got implemented
(rte_eth_dev_set_mc_addr_list()) however PMD-agnostic applications still
rely on it for compatibility reasons; a wrapper is therefore required.

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
 drivers/net/mlx4/mlx4.c        |  1 +
 drivers/net/mlx4/mlx4.h        |  3 ++
 drivers/net/mlx4/mlx4_ethdev.c | 61 +++++++++++++++++++++++++++++++++++--
 3 files changed, 63 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
index 17dfcd5a3..fe559c040 100644
--- a/drivers/net/mlx4/mlx4.c
+++ b/drivers/net/mlx4/mlx4.c
@@ -410,6 +410,7 @@ static const struct eth_dev_ops mlx4_dev_ops = {
 	.mac_addr_remove = mlx4_mac_addr_remove,
 	.mac_addr_add = mlx4_mac_addr_add,
 	.mac_addr_set = mlx4_mac_addr_set,
+	.set_mc_addr_list = mlx4_set_mc_addr_list,
 	.stats_get = mlx4_stats_get,
 	.stats_reset = mlx4_stats_reset,
 	.fw_version_get = mlx4_fw_version_get,
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 6224b3be1..e2d184f84 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -188,6 +188,7 @@ struct mlx4_priv {
 	LIST_HEAD(, rte_flow) flows; /**< Configured flow rule handles. */
 	struct ether_addr mac[MLX4_MAX_MAC_ADDRESSES];
 	/**< Configured MAC addresses. Unused entries are zeroed. */
+	uint32_t mac_mc; /**< Number of trailing multicast entries in mac[]. */
 	struct mlx4_verbs_alloc_ctx verbs_alloc_ctx;
 	/**< Context for Verbs allocator. */
 };
@@ -211,6 +212,8 @@ void mlx4_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
 int mlx4_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
 		      uint32_t index, uint32_t vmdq);
 int mlx4_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr);
+int mlx4_set_mc_addr_list(struct rte_eth_dev *dev, struct ether_addr *list,
+			  uint32_t num);
 int mlx4_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on);
 int mlx4_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats);
 void mlx4_stats_reset(struct rte_eth_dev *dev);
diff --git a/drivers/net/mlx4/mlx4_ethdev.c b/drivers/net/mlx4/mlx4_ethdev.c
index 4dae67a1b..c38455767 100644
--- a/drivers/net/mlx4/mlx4_ethdev.c
+++ b/drivers/net/mlx4/mlx4_ethdev.c
@@ -433,7 +433,7 @@ mlx4_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
 	struct mlx4_priv *priv = dev->data->dev_private;
 	struct rte_flow_error error;
 
-	if (index >= RTE_DIM(priv->mac)) {
+	if (index >= RTE_DIM(priv->mac) - priv->mac_mc) {
 		rte_errno = EINVAL;
 		return;
 	}
@@ -471,7 +471,7 @@ mlx4_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
 	int ret;
 
 	(void)vmdq;
-	if (index >= RTE_DIM(priv->mac)) {
+	if (index >= RTE_DIM(priv->mac) - priv->mac_mc) {
 		rte_errno = EINVAL;
 		return -rte_errno;
 	}
@@ -488,6 +488,63 @@ mlx4_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
 }
 
 /**
+ * DPDK callback to configure multicast addresses.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param list
+ *   List of MAC addresses to register.
+ * @param num
+ *   Number of entries in list.
+ *
+ * @return
+ *   0 on success, negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx4_set_mc_addr_list(struct rte_eth_dev *dev, struct ether_addr *list,
+		      uint32_t num)
+{
+	struct priv *priv = dev->data->dev_private;
+	struct rte_flow_error error;
+	int ret;
+
+	if (num > RTE_DIM(priv->mac)) {
+		rte_errno = EINVAL;
+		return -rte_errno;
+	}
+	/*
+	 * Make sure there is enough room to increase the number of
+	 * multicast entries without overwriting standard entries.
+	 */
+	if (num > priv->mac_mc) {
+		unsigned int i;
+
+		for (i = RTE_DIM(priv->mac) - num;
+		     i != RTE_DIM(priv->mac) - priv->mac_mc;
+		     ++i)
+			if (!is_zero_ether_addr(&priv->mac[i])) {
+				rte_errno = EBUSY;
+				return -rte_errno;
+			}
+	} else if (num < priv->mac_mc) {
+		/* Clear unused entries. */
+		memset(priv->mac + RTE_DIM(priv->mac) - priv->mac_mc,
+		       0,
+		       sizeof(priv->mac[0]) * (priv->mac_mc - num));
+	}
+	memcpy(priv->mac + RTE_DIM(priv->mac) - num, list, sizeof(*list) * num);
+	priv->mac_mc = num;
+	ret = mlx4_flow_sync(priv, &error);
+	if (!ret)
+		return 0;
+	ERROR("failed to synchronize flow rules after modifying MC list,"
+	      " (code %d, \"%s\"), flow error type %d, cause %p, message: %s",
+	      rte_errno, strerror(rte_errno), error.type, error.cause,
+	      error.message ? error.message : "(unspecified)");
+	return ret;
+}
+
+/**
  * DPDK callback to configure a VLAN filter.
  *
  * @param dev
-- 
2.11.0

             reply	other threads:[~2019-04-18 13:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-18 13:10 Adrien Mazarguil [this message]
2019-04-18 13:10 ` Adrien Mazarguil
2019-04-29  8:54 ` Shahaf Shuler
2019-04-29  8:54   ` Shahaf Shuler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190418130245.25618-1-adrien.mazarguil@6wind.com \
    --to=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=matan@mellanox.com \
    --cc=shahafs@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).