From: Stephen Hemminger <stephen@networkplumber.org>
To: gaetan.rivet@6wind.com
Cc: dev@dpdk.org, Stephen Hemminger <stephen@networkplumber.org>,
Stephen Hemminger <sthemmin@microsoft.com>
Subject: [dpdk-dev] [PATCH] net/failsafe: fix reported device info
Date: Wed, 15 May 2019 20:53:10 -0700 [thread overview]
Message-ID: <20190516035310.31145-1-stephen@networkplumber.org> (raw)
Message-ID: <20190516035310.Od78nCpoLvA5cZZesAtX9TWAOuo2ELylgAMFKU9xwxs@z> (raw)
The failsafe driver device info had several issues in the
info it reported in dev_info_get:
- it cleared dev_info->device set in rte_eth_dev_info_get
- many fields (for example max_rx_queue) should be the minimum
of all sub devices
- it reported tx capa for the active transmit device, but
the device may change.
There was enough messed up that ended up reworking the info_get
handler. There is no need to save current values or have a
template for defaults.
Fixes: 4e31ee26ed51 ("net/failsafe: report actual device capabilities")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
---
drivers/net/failsafe/failsafe_ops.c | 220 ++++++++++++------------
drivers/net/failsafe/failsafe_private.h | 1 -
2 files changed, 109 insertions(+), 112 deletions(-)
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 43d6a828ffa5..5d311492cece 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -17,81 +17,6 @@
#include "failsafe_private.h"
-static struct rte_eth_dev_info default_infos = {
- /* Max possible number of elements */
- .max_rx_pktlen = UINT32_MAX,
- .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
- .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
- .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
- .max_hash_mac_addrs = UINT32_MAX,
- .max_vfs = UINT16_MAX,
- .max_vmdq_pools = UINT16_MAX,
- .rx_desc_lim = {
- .nb_max = UINT16_MAX,
- .nb_min = 0,
- .nb_align = 1,
- .nb_seg_max = UINT16_MAX,
- .nb_mtu_seg_max = UINT16_MAX,
- },
- .tx_desc_lim = {
- .nb_max = UINT16_MAX,
- .nb_min = 0,
- .nb_align = 1,
- .nb_seg_max = UINT16_MAX,
- .nb_mtu_seg_max = UINT16_MAX,
- },
- /*
- * Set of capabilities that can be verified upon
- * configuring a sub-device.
- */
- .rx_offload_capa =
- DEV_RX_OFFLOAD_VLAN_STRIP |
- DEV_RX_OFFLOAD_IPV4_CKSUM |
- DEV_RX_OFFLOAD_UDP_CKSUM |
- DEV_RX_OFFLOAD_TCP_CKSUM |
- DEV_RX_OFFLOAD_TCP_LRO |
- DEV_RX_OFFLOAD_QINQ_STRIP |
- DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM |
- DEV_RX_OFFLOAD_MACSEC_STRIP |
- DEV_RX_OFFLOAD_HEADER_SPLIT |
- DEV_RX_OFFLOAD_VLAN_FILTER |
- DEV_RX_OFFLOAD_VLAN_EXTEND |
- DEV_RX_OFFLOAD_JUMBO_FRAME |
- DEV_RX_OFFLOAD_SCATTER |
- DEV_RX_OFFLOAD_TIMESTAMP |
- DEV_RX_OFFLOAD_SECURITY,
- .rx_queue_offload_capa =
- DEV_RX_OFFLOAD_VLAN_STRIP |
- DEV_RX_OFFLOAD_IPV4_CKSUM |
- DEV_RX_OFFLOAD_UDP_CKSUM |
- DEV_RX_OFFLOAD_TCP_CKSUM |
- DEV_RX_OFFLOAD_TCP_LRO |
- DEV_RX_OFFLOAD_QINQ_STRIP |
- DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM |
- DEV_RX_OFFLOAD_MACSEC_STRIP |
- DEV_RX_OFFLOAD_HEADER_SPLIT |
- DEV_RX_OFFLOAD_VLAN_FILTER |
- DEV_RX_OFFLOAD_VLAN_EXTEND |
- DEV_RX_OFFLOAD_JUMBO_FRAME |
- DEV_RX_OFFLOAD_SCATTER |
- DEV_RX_OFFLOAD_TIMESTAMP |
- DEV_RX_OFFLOAD_SECURITY,
- .tx_offload_capa =
- DEV_TX_OFFLOAD_MULTI_SEGS |
- DEV_TX_OFFLOAD_MBUF_FAST_FREE |
- DEV_TX_OFFLOAD_IPV4_CKSUM |
- DEV_TX_OFFLOAD_UDP_CKSUM |
- DEV_TX_OFFLOAD_TCP_CKSUM |
- DEV_TX_OFFLOAD_TCP_TSO,
- .flow_type_rss_offloads =
- ETH_RSS_IP |
- ETH_RSS_UDP |
- ETH_RSS_TCP,
- .dev_capa =
- RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP |
- RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP,
-};
-
static int
fs_dev_configure(struct rte_eth_dev *dev)
{
@@ -864,6 +789,46 @@ fs_stats_reset(struct rte_eth_dev *dev)
fs_unlock(dev, 0);
}
+static void
+fs_dev_merge_desc_lim(struct rte_eth_desc_lim *to,
+ const struct rte_eth_desc_lim *from)
+{
+ to->nb_max = RTE_MIN(to->nb_max, from->nb_max);
+ to->nb_min = RTE_MAX(to->nb_min, from->nb_min);
+ to->nb_align = RTE_MAX(to->nb_align, from->nb_align);
+
+ to->nb_seg_max = RTE_MIN(to->nb_seg_max, from->nb_seg_max);
+ to->nb_mtu_seg_max = RTE_MIN(to->nb_mtu_seg_max, from->nb_mtu_seg_max);
+}
+
+/*
+ * Merge the information from sub-devices.
+ *
+ * The reported values must be the common subset of all sub devices
+ */
+static void
+fs_dev_merge_info(struct rte_eth_dev_info *info,
+ const struct rte_eth_dev_info *sinfo)
+{
+ info->max_rx_pktlen = RTE_MIN(info->max_rx_pktlen, sinfo->max_rx_pktlen);
+ info->max_rx_queues = RTE_MIN(info->max_rx_queues, sinfo->max_rx_queues);
+ info->max_tx_queues = RTE_MIN(info->max_tx_queues, sinfo->max_tx_queues);
+ info->max_mac_addrs = RTE_MIN(info->max_mac_addrs, sinfo->max_mac_addrs);
+ info->max_hash_mac_addrs = RTE_MIN(info->max_hash_mac_addrs,
+ sinfo->max_hash_mac_addrs);
+ info->max_vmdq_pools = RTE_MIN(info->max_vmdq_pools, sinfo->max_vmdq_pools);
+ info->max_vfs = RTE_MIN(info->max_vfs, sinfo->max_vfs);
+
+ fs_dev_merge_desc_lim(&info->rx_desc_lim, &sinfo->rx_desc_lim);
+ fs_dev_merge_desc_lim(&info->tx_desc_lim, &sinfo->tx_desc_lim);
+
+ info->rx_offload_capa &= sinfo->rx_offload_capa;
+ info->tx_offload_capa &= sinfo->tx_offload_capa;
+ info->rx_queue_offload_capa &= sinfo->rx_queue_offload_capa;
+ info->tx_queue_offload_capa &= sinfo->tx_queue_offload_capa;
+ info->flow_type_rss_offloads &= sinfo->flow_type_rss_offloads;
+}
+
/**
* Fail-safe dev_infos_get rules:
*
@@ -902,43 +867,76 @@ fs_dev_infos_get(struct rte_eth_dev *dev,
struct sub_device *sdev;
uint8_t i;
- sdev = TX_SUBDEV(dev);
- if (sdev == NULL) {
- DEBUG("No probed device, using default infos");
- rte_memcpy(&PRIV(dev)->infos, &default_infos,
- sizeof(default_infos));
- } else {
- uint64_t rx_offload_capa;
- uint64_t rxq_offload_capa;
- uint64_t rss_hf_offload_capa;
- uint64_t dev_capa;
-
- rx_offload_capa = default_infos.rx_offload_capa;
- rxq_offload_capa = default_infos.rx_queue_offload_capa;
- rss_hf_offload_capa = default_infos.flow_type_rss_offloads;
- dev_capa = default_infos.dev_capa;
- FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_PROBED) {
- rte_eth_dev_info_get(PORT_ID(sdev),
- &PRIV(dev)->infos);
- rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
- rxq_offload_capa &=
- PRIV(dev)->infos.rx_queue_offload_capa;
- rss_hf_offload_capa &=
- PRIV(dev)->infos.flow_type_rss_offloads;
- dev_capa &= PRIV(dev)->infos.dev_capa;
- }
- sdev = TX_SUBDEV(dev);
- rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
- PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
- PRIV(dev)->infos.rx_queue_offload_capa = rxq_offload_capa;
- PRIV(dev)->infos.flow_type_rss_offloads = rss_hf_offload_capa;
- PRIV(dev)->infos.dev_capa = dev_capa;
- PRIV(dev)->infos.tx_offload_capa &=
- default_infos.tx_offload_capa;
- PRIV(dev)->infos.tx_queue_offload_capa &=
- default_infos.tx_queue_offload_capa;
+ /* Use maximum upper bounds by default */
+ infos->max_rx_pktlen = UINT32_MAX;
+ infos->max_rx_queues = RTE_MAX_QUEUES_PER_PORT;
+ infos->max_tx_queues = RTE_MAX_QUEUES_PER_PORT;
+ infos->max_mac_addrs = FAILSAFE_MAX_ETHADDR;
+ infos->max_hash_mac_addrs = UINT32_MAX;
+ infos->max_vfs = UINT16_MAX;
+ infos->max_vmdq_pools = UINT16_MAX;
+
+ /*
+ * Set of capabilities that can be verified upon
+ * configuring a sub-device.
+ */
+ infos->rx_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_MACSEC_STRIP |
+ DEV_RX_OFFLOAD_HEADER_SPLIT |
+ DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_VLAN_EXTEND |
+ DEV_RX_OFFLOAD_JUMBO_FRAME |
+ DEV_RX_OFFLOAD_SCATTER |
+ DEV_RX_OFFLOAD_TIMESTAMP |
+ DEV_RX_OFFLOAD_SECURITY;
+
+ infos->rx_queue_offload_capa =
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_LRO |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_MACSEC_STRIP |
+ DEV_RX_OFFLOAD_HEADER_SPLIT |
+ DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_VLAN_EXTEND |
+ DEV_RX_OFFLOAD_JUMBO_FRAME |
+ DEV_RX_OFFLOAD_SCATTER |
+ DEV_RX_OFFLOAD_TIMESTAMP |
+ DEV_RX_OFFLOAD_SECURITY;
+
+ infos->tx_offload_capa =
+ DEV_TX_OFFLOAD_MULTI_SEGS |
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE |
+ DEV_TX_OFFLOAD_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_UDP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_TSO;
+
+ infos->flow_type_rss_offloads =
+ ETH_RSS_IP |
+ ETH_RSS_UDP |
+ ETH_RSS_TCP;
+ infos->dev_capa =
+ RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP |
+ RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_PROBED) {
+ struct rte_eth_dev_info sub_info;
+
+ rte_eth_dev_info_get(PORT_ID(sdev), &sub_info);
+
+ fs_dev_merge_info(infos, &sub_info);
}
- rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
}
static const uint32_t *
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 4f58a5c918b8..d9fd3d3265e3 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -157,7 +157,6 @@ struct fs_priv {
uint32_t nb_mcast_addr;
struct ether_addr *mcast_addrs;
/* current capabilities */
- struct rte_eth_dev_info infos;
struct rte_eth_dev_owner my_owner; /* Unique owner. */
struct rte_intr_handle intr_handle; /* Port interrupt handle. */
/*
--
2.20.1
next reply other threads:[~2019-05-16 3:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-16 3:53 Stephen Hemminger [this message]
2019-05-16 3:53 ` Stephen Hemminger
2019-06-07 10:58 ` Ferruh Yigit
2019-06-07 12:18 ` Gaëtan Rivet
2019-06-07 16:36 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190516035310.31145-1-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=gaetan.rivet@6wind.com \
--cc=sthemmin@microsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).