From: Lance Richardson <lance.richardson@broadcom.com>
To: dev@dpdk.org
Cc: ajit.khaparde@broadcom.com, ferruh.yigit@intel.com,
maxime.coquelin@redhat.com
Subject: [dpdk-dev] [PATCH v2 08/10] net/bnxt: update HWRM version
Date: Fri, 24 May 2019 10:49:33 -0400 [thread overview]
Message-ID: <20190524144935.18765-9-lance.richardson@broadcom.com> (raw)
In-Reply-To: <20190524144935.18765-1-lance.richardson@broadcom.com>
From: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update HWRM version to 1.10.0.48
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
---
drivers/net/bnxt/hsi_struct_def_dpdk.h | 3156 +++++++++++++++++++++---
1 file changed, 2874 insertions(+), 282 deletions(-)
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index ea9a7d40e..00a8ff87e 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -260,6 +260,7 @@ struct cmd_nums {
*/
uint16_t req_type;
#define HWRM_VER_GET UINT32_C(0x0)
+ #define HWRM_ERROR_RECOVERY_QCFG UINT32_C(0xc)
#define HWRM_FUNC_DRV_IF_CHANGE UINT32_C(0xd)
#define HWRM_FUNC_BUF_UNRGTR UINT32_C(0xe)
#define HWRM_FUNC_VF_CFG UINT32_C(0xf)
@@ -372,6 +373,8 @@ struct cmd_nums {
#define HWRM_STAT_CTX_QUERY UINT32_C(0xb2)
#define HWRM_STAT_CTX_CLR_STATS UINT32_C(0xb3)
#define HWRM_PORT_QSTATS_EXT UINT32_C(0xb4)
+ #define HWRM_PORT_PHY_MDIO_WRITE UINT32_C(0xb5)
+ #define HWRM_PORT_PHY_MDIO_READ UINT32_C(0xb6)
#define HWRM_FW_RESET UINT32_C(0xc0)
#define HWRM_FW_QSTATUS UINT32_C(0xc1)
#define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2)
@@ -397,6 +400,8 @@ struct cmd_nums {
#define HWRM_WOL_FILTER_QCFG UINT32_C(0xf2)
#define HWRM_WOL_REASON_QCFG UINT32_C(0xf3)
/* Experimental */
+ #define HWRM_CFA_METER_QCAPS UINT32_C(0xf4)
+ /* Experimental */
#define HWRM_CFA_METER_PROFILE_ALLOC UINT32_C(0xf5)
/* Experimental */
#define HWRM_CFA_METER_PROFILE_FREE UINT32_C(0xf6)
@@ -407,6 +412,8 @@ struct cmd_nums {
/* Experimental */
#define HWRM_CFA_METER_INSTANCE_FREE UINT32_C(0xf9)
/* Experimental */
+ #define HWRM_CFA_METER_INSTANCE_CFG UINT32_C(0xfa)
+ /* Experimental */
#define HWRM_CFA_VFR_ALLOC UINT32_C(0xfd)
/* Experimental */
#define HWRM_CFA_VFR_FREE UINT32_C(0xfe)
@@ -451,6 +458,34 @@ struct cmd_nums {
#define HWRM_CFA_FLOW_AGING_QCFG UINT32_C(0x115)
/* Experimental */
#define HWRM_CFA_FLOW_AGING_QCAPS UINT32_C(0x116)
+ /* Experimental */
+ #define HWRM_CFA_CTX_MEM_RGTR UINT32_C(0x117)
+ /* Experimental */
+ #define HWRM_CFA_CTX_MEM_UNRGTR UINT32_C(0x118)
+ /* Experimental */
+ #define HWRM_CFA_CTX_MEM_QCTX UINT32_C(0x119)
+ /* Experimental */
+ #define HWRM_CFA_CTX_MEM_QCAPS UINT32_C(0x11a)
+ /* Experimental */
+ #define HWRM_CFA_COUNTER_QCAPS UINT32_C(0x11b)
+ /* Experimental */
+ #define HWRM_CFA_COUNTER_CFG UINT32_C(0x11c)
+ /* Experimental */
+ #define HWRM_CFA_COUNTER_QCFG UINT32_C(0x11d)
+ /* Experimental */
+ #define HWRM_CFA_COUNTER_QSTATS UINT32_C(0x11e)
+ /* Experimental */
+ #define HWRM_CFA_TCP_FLAG_PROCESS_QCFG UINT32_C(0x11f)
+ /* Experimental */
+ #define HWRM_CFA_EEM_QCAPS UINT32_C(0x120)
+ /* Experimental */
+ #define HWRM_CFA_EEM_CFG UINT32_C(0x121)
+ /* Experimental */
+ #define HWRM_CFA_EEM_QCFG UINT32_C(0x122)
+ /* Experimental */
+ #define HWRM_CFA_EEM_OP UINT32_C(0x123)
+ /* Experimental */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124)
/* Engine CKV - Ping the device and SRT firmware to get the public key. */
#define HWRM_ENGINE_CKV_HELLO UINT32_C(0x12d)
/* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */
@@ -469,6 +504,8 @@ struct cmd_nums {
#define HWRM_ENGINE_CKV_RNG_GET UINT32_C(0x134)
/* Engine CKV - Generate and encrypt a new AES key. */
#define HWRM_ENGINE_CKV_KEY_GEN UINT32_C(0x135)
+ /* Engine CKV - Configure a label index with a label value. */
+ #define HWRM_ENGINE_CKV_KEY_LABEL_CFG UINT32_C(0x136)
/* Engine - Query the available queue groups configuration. */
#define HWRM_ENGINE_QG_CONFIG_QUERY UINT32_C(0x13c)
/* Engine - Query the queue groups assigned to a function. */
@@ -523,6 +560,8 @@ struct cmd_nums {
#define HWRM_ENGINE_NQ_FREE UINT32_C(0x163)
/* Engine - Set the on-die RQE credit update location. */
#define HWRM_ENGINE_ON_DIE_RQE_CREDITS UINT32_C(0x164)
+ /* Engine - Query the engine function configuration. */
+ #define HWRM_ENGINE_FUNC_QCFG UINT32_C(0x165)
/* Experimental */
#define HWRM_FUNC_RESOURCE_QCAPS UINT32_C(0x190)
/* Experimental */
@@ -573,6 +612,10 @@ struct cmd_nums {
/* */
#define HWRM_DBG_RING_INFO_GET UINT32_C(0xff1c)
/* Experimental */
+ #define HWRM_DBG_CRASHDUMP_HEADER UINT32_C(0xff1d)
+ /* Experimental */
+ #define HWRM_DBG_CRASHDUMP_ERASE UINT32_C(0xff1e)
+ /* Experimental */
#define HWRM_NVM_FACTORY_DEFAULTS UINT32_C(0xffee)
#define HWRM_NVM_VALIDATE_OPTION UINT32_C(0xffef)
#define HWRM_NVM_FLUSH UINT32_C(0xfff0)
@@ -724,8 +767,8 @@ struct hwrm_err_output {
#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
/* hwrm_func_buf_rgtr */
#define HWRM_MAX_REQ_LEN 128
-/* hwrm_selftest_qlist */
-#define HWRM_MAX_RESP_LEN 280
+/* hwrm_cfa_flow_info */
+#define HWRM_MAX_RESP_LEN 704
/* 7 bit indirection table index. */
#define HW_HASH_INDEX_SIZE 0x80
#define HW_HASH_KEY_SIZE 40
@@ -735,8 +778,8 @@ struct hwrm_err_output {
#define HWRM_VERSION_MINOR 10
#define HWRM_VERSION_UPDATE 0
/* non-zero means beta version */
-#define HWRM_VERSION_RSVD 19
-#define HWRM_VERSION_STR "1.10.0.19"
+#define HWRM_VERSION_RSVD 48
+#define HWRM_VERSION_STR "1.10.0.48"
/****************
* hwrm_ver_get *
@@ -993,6 +1036,32 @@ struct hwrm_ver_get_output {
*/
#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FLOW_AGING_SUPPORTED \
UINT32_C(0x200)
+ /*
+ * If set to 1, firmware is capable to support advanced flow counters like,
+ * Meter drop counters and EEM counters.
+ * If set to 0, firmware is not capable to support advanced flow counters.
+ * By default, this flag should be 0 for older version of core firmware.
+ */
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_ADV_FLOW_COUNTERS_SUPPORTED \
+ UINT32_C(0x400)
+ /*
+ * If set to 1, the firmware is able to support the use of the CFA
+ * Extended Exact Match(EEM) feature.
+ * If set to 0, firmware is not capable to support the use of the
+ * CFA EEM feature.
+ * By default, this flag should be 0 for older version of core firmware.
+ */
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_EEM_SUPPORTED \
+ UINT32_C(0x800)
+ /*
+ * If set to 1, the firmware is able to support advance CFA flow management
+ * features reported in the HWRM_CFA_FLOW_MGNT_QCAPS.
+ * If set to 0, then the firmware doesn’t support the advance CFA flow management
+ * features.
+ * By default, this flag should be 0 for older version of core firmware.
+ */
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_CFA_ADV_FLOW_MGNT_SUPPORTED \
+ UINT32_C(0x1000)
/*
* This field represents the major version of RoCE firmware.
* A change in major version represents a major release.
@@ -3695,6 +3764,9 @@ struct hwrm_async_event_cmpl {
/* Reset notification to clients */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY \
UINT32_C(0x8)
+ /* Master function selection event */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY \
+ UINT32_C(0x9)
/* Function driver unloaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \
UINT32_C(0x10)
@@ -3739,6 +3811,40 @@ struct hwrm_async_event_cmpl {
*/
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEBUG_NOTIFICATION \
UINT32_C(0x37)
+ /*
+ * A EEM flow cached memory flush request event being posted to the PF
+ * driver.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_REQ \
+ UINT32_C(0x38)
+ /*
+ * A EEM flow cache memory flush completion event being posted to the
+ * firmware by the PF driver. This is indication that host EEM flush
+ * has completed by the PF.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CACHE_FLUSH_DONE \
+ UINT32_C(0x39)
+ /*
+ * A tcp flag action change event being posted to the PF or trusted VF
+ * driver by the firmware. The PF or trusted VF driver should query
+ * the firmware for the new TCP flag action update after receiving
+ * this async event.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TCP_FLAG_ACTION_CHANGE \
+ UINT32_C(0x3a)
+ /*
+ * A eem flow active event being posted to the PF or trusted VF driver
+ * by the firmware. The PF or trusted VF driver should update the
+ * flow's aging timer after receiving this async event.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_FLOW_ACTIVE \
+ UINT32_C(0x3b)
+ /*
+ * A eem cfg change event being posted to the trusted VF driver by the
+ * firmware if the parent PF EEM configuration changed.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_EEM_CFG_CHANGE \
+ UINT32_C(0x3c)
/*
* A trace log message. This contains firmware trace logs string
* embedded in the asynchronous message. This is an experimental
@@ -4450,6 +4556,75 @@ struct hwrm_async_event_cmpl_reset_notify {
16
} __attribute__((packed));
+/* hwrm_async_event_cmpl_error_recovery (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_recovery {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message can be used for selecting or
+ * deselecting master function for error recovery,
+ * and to communicate to all the functions whether error recovery
+ * was enabled/disabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_ERROR_RECOVERY \
+ UINT32_C(0x9)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_ID_ERROR_RECOVERY
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates driver action requested */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_SFT \
+ 0
+ /*
+ * If set to 1, this function is selected as Master function.
+ * This function has responsibility to do 'chip reset' when it
+ * detects a fatal error. If set to 0, master function functionality
+ * is disabled on this function.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_MASTER_FUNC \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, error recovery is enabled.
+ * If set to 0, error recovery is disabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_RECOVERY_ENABLED \
+ UINT32_C(0x2)
+} __attribute__((packed));
+
/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */
struct hwrm_async_event_cmpl_func_drvr_unload {
uint16_t type;
@@ -5182,8 +5357,8 @@ struct hwrm_async_event_cmpl_hw_flow_aged {
HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_TX
} __attribute__((packed));
-/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */
-struct hwrm_async_event_cmpl_hwrm_error {
+/* hwrm_async_event_cmpl_eem_cache_flush_req (size:128b/16B) */
+struct hwrm_async_event_cmpl_eem_cache_flush_req {
uint16_t type;
/*
* This field indicates the exact type of the completion.
@@ -5192,133 +5367,549 @@ struct hwrm_async_event_cmpl_hwrm_error {
* records. Odd values indicate 32B
* records.
*/
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_MASK \
UINT32_C(0x3f)
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_SFT \
+ 0
/* HWRM Asynchronous Event Information */
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_HWRM_ASYNC_EVENT \
UINT32_C(0x2e)
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \
- HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_HWRM_ASYNC_EVENT
/* Identifiers of events. */
uint16_t event_id;
- /* HWRM Error */
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \
- UINT32_C(0xff)
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \
- HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR
+ /* Notification of a eem_cache_flush request */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_EEM_CACHE_FLUSH_REQ \
+ UINT32_C(0x38)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_EVENT_ID_EEM_CACHE_FLUSH_REQ
/* Event specific data */
uint32_t event_data2;
- /* Severity of HWRM Error */
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \
- UINT32_C(0xff)
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0
- /* Warning */
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \
- UINT32_C(0x0)
- /* Non-fatal Error */
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \
- UINT32_C(0x1)
- /* Fatal Error */
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \
- UINT32_C(0x2)
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \
- HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
* for each pass through the completion queue. The even passes
* will write 1. The odd passes will write 0.
*/
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_V \
+ UINT32_C(0x1)
/* opaque is 7 b */
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe)
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_OPAQUE_SFT 1
/* 8-lsb timestamp from POR (100-msec resolution) */
uint8_t timestamp_lo;
/* 16-lsb timestamp from POR (100-msec resolution) */
uint16_t timestamp_hi;
/* Event specific data */
uint32_t event_data1;
- /* Time stamp for error event */
- #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \
- UINT32_C(0x1)
} __attribute__((packed));
-/*******************
- * hwrm_func_reset *
- *******************/
-
-
-/* hwrm_func_reset_input (size:192b/24B) */
-struct hwrm_func_reset_input {
- /* The HWRM command request type. */
- uint16_t req_type;
+/* hwrm_async_event_cmpl_eem_cache_flush_done (size:128b/16B) */
+struct hwrm_async_event_cmpl_eem_cache_flush_done {
+ uint16_t type;
/*
- * The completion ring to send the completion event on. This should
- * be the NQ ID returned from the `nq_alloc` HWRM command.
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
*/
- uint16_t cmpl_ring;
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
/*
- * The sequence ID is used by the driver for tracking multiple
- * commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
+ * Notification of a host eem_cache_flush has completed. This event
+ * is generated by the host driver.
*/
- uint16_t seq_id;
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_EEM_CACHE_FLUSH_DONE \
+ UINT32_C(0x39)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_ID_EEM_CACHE_FLUSH_DONE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
/*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
- * * 0xFFFF - HWRM
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- uint16_t target_id;
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates function ID that this event occured on. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_SFT \
+ 0
+} __attribute__((packed));
+
+/* hwrm_async_event_cmpl_tcp_flag_action_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_tcp_flag_action_change {
+ uint16_t type;
/*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
*/
- uint64_t resp_addr;
- uint32_t enables;
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of tcp flag action change */
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE \
+ UINT32_C(0x3a)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
/*
- * This bit must be '1' for the vf_id_valid field to be
- * configured.
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+} __attribute__((packed));
+
+/* hwrm_async_event_cmpl_eem_flow_active (size:128b/16B) */
+struct hwrm_async_event_cmpl_eem_flow_active {
+ uint16_t type;
/*
- * The ID of the VF that this PF is trying to reset.
- * Only the parent PF shall be allowed to reset a child VF.
- *
- * A parent PF driver shall use this field only when a specific child VF
- * is requested to be reset.
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
*/
- uint16_t vf_id;
- /* This value indicates the level of a function reset. */
- uint8_t func_reset_level;
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of an active eem flow */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE \
+ UINT32_C(0x3b)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_ID_EEM_FLOW_ACTIVE
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Indicates the 2nd global id this event occured on. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_GLOBAL_ID_2_SFT \
+ 0
/*
- * Reset the caller function and its children VFs (if any). If no
- * children functions exist, then reset the caller function only.
- */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \
- UINT32_C(0x0)
- /* Reset the caller function only */
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \
- UINT32_C(0x1)
+ * Indicates flow direction of the flow identified by
+ * the global_id_2.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION \
+ UINT32_C(0x40000000)
+ /* If this bit is set to 0, then it indicates that this rx flow. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_RX \
+ (UINT32_C(0x0) << 30)
+ /* If this bit is set to 1, then it indicates that this tx flow. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_TX \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA2_FLOW_DIRECTION_TX
+ uint8_t opaque_v;
/*
- * Reset all children VFs of the caller function driver if the
- * caller is a PF driver.
- * It is an error to specify this level by a VF driver.
- * It is an error to specify this level by a PF driver with
- * no children VFs.
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
- UINT32_C(0x2)
- /*
- * Reset a specific VF of the caller function driver if the caller
- * is the parent PF driver.
- * It is an error to specify this level by a VF driver.
- * It is an error to specify this level by a PF driver that is not
- * the parent of the VF that is being requested to reset.
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates the 1st global id this event occured on. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_MASK \
+ UINT32_C(0x3fffffff)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_GLOBAL_ID_1_SFT \
+ 0
+ /*
+ * Indicates flow direction of the flow identified by the
+ * global_id_1.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION \
+ UINT32_C(0x40000000)
+ /* If this bit is set to 0, then it indicates that this is rx flow. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_RX \
+ (UINT32_C(0x0) << 30)
+ /* If this bit is set to 1, then it indicates that this is tx flow. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_FLOW_DIRECTION_TX
+ /*
+ * Indicates EEM flow aging mode this event occured on. If
+ * this bit is set to 0, the event_data1 is the EEM global
+ * ID. If this bit is set to 1, the event_data1 is the number
+ * of global ID in the context memory.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE \
+ UINT32_C(0x80000000)
+ /* EEM flow aging mode 0. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_0 \
+ (UINT32_C(0x0) << 31)
+ /* EEM flow aging mode 1. */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1 \
+ (UINT32_C(0x1) << 31)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1
+} __attribute__((packed));
+
+/* hwrm_async_event_cmpl_eem_cfg_change (size:128b/16B) */
+struct hwrm_async_event_cmpl_eem_cfg_change {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Notification of EEM configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_EEM_CFG_CHANGE \
+ UINT32_C(0x3c)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_ID_EEM_CFG_CHANGE
+ /* Event specific data */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /*
+ * Value of 1 to indicate EEM TX configuration is enabled. Value of
+ * 0 to indicate the EEM TX configuration is disabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_TX_ENABLE \
+ UINT32_C(0x1)
+ /*
+ * Value of 1 to indicate EEM RX configuration is enabled. Value of 0
+ * to indicate the EEM RX configuration is disabled.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_RX_ENABLE \
+ UINT32_C(0x2)
+} __attribute__((packed));
+
+/* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */
+struct hwrm_async_event_cmpl_fw_trace_msg {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Firmware trace log message */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_FW_TRACE_MSG \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_ID_FW_TRACE_MSG
+ /* Trace byte 0 to 3 */
+ uint32_t event_data2;
+ /* Trace byte0 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE0_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE0_SFT 0
+ /* Trace byte1 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE1_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE1_SFT 8
+ /* Trace byte2 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE2_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE2_SFT 16
+ /* Trace byte3 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE3_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA2_BYTE3_SFT 24
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_OPAQUE_SFT 1
+ /* Trace flags */
+ uint8_t timestamp_lo;
+ /* Indicates if the string is partial or complete. */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING \
+ UINT32_C(0x1)
+ /* Complete string */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_COMPLETE \
+ UINT32_C(0x0)
+ /* Partial string */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_PARTIAL \
+ UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_STRING_PARTIAL
+ /* Indicates the firmware that sent the trace message. */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE \
+ UINT32_C(0x2)
+ /* Primary firmware */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_PRIMARY \
+ (UINT32_C(0x0) << 1)
+ /* Secondary firmware */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_SECONDARY \
+ (UINT32_C(0x1) << 1)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_LO_FIRMWARE_SECONDARY
+ /* Trace byte 4 to 5 */
+ uint16_t timestamp_hi;
+ /* Trace byte4 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE4_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE4_SFT 0
+ /* Trace byte5 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE5_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TIMESTAMP_HI_BYTE5_SFT 8
+ /* Trace byte 6 to 9 */
+ uint32_t event_data1;
+ /* Trace byte6 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE6_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE6_SFT 0
+ /* Trace byte7 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE7_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE7_SFT 8
+ /* Trace byte8 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE8_MASK \
+ UINT32_C(0xff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE8_SFT 16
+ /* Trace byte9 */
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_SFT 24
+} __attribute__((packed));
+
+/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */
+struct hwrm_async_event_cmpl_hwrm_error {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* HWRM Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Severity of HWRM Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0
+ /* Warning */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \
+ UINT32_C(0x0)
+ /* Non-fatal Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \
+ UINT32_C(0x1)
+ /* Fatal Error */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \
+ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Time stamp for error event */
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \
+ UINT32_C(0x1)
+} __attribute__((packed));
+
+/*******************
+ * hwrm_func_reset *
+ *******************/
+
+
+/* hwrm_func_reset_input (size:192b/24B) */
+struct hwrm_func_reset_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vf_id_valid field to be
+ * configured.
+ */
+ #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ /*
+ * The ID of the VF that this PF is trying to reset.
+ * Only the parent PF shall be allowed to reset a child VF.
+ *
+ * A parent PF driver shall use this field only when a specific child VF
+ * is requested to be reset.
+ */
+ uint16_t vf_id;
+ /* This value indicates the level of a function reset. */
+ uint8_t func_reset_level;
+ /*
+ * Reset the caller function and its children VFs (if any). If no
+ * children functions exist, then reset the caller function only.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \
+ UINT32_C(0x0)
+ /* Reset the caller function only */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \
+ UINT32_C(0x1)
+ /*
+ * Reset all children VFs of the caller function driver if the
+ * caller is a PF driver.
+ * It is an error to specify this level by a VF driver.
+ * It is an error to specify this level by a PF driver with
+ * no children VFs.
+ */
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
+ UINT32_C(0x2)
+ /*
+ * Reset a specific VF of the caller function driver if the caller
+ * is the parent PF driver.
+ * It is an error to specify this level by a VF driver.
+ * It is an error to specify this level by a PF driver that is not
+ * the parent of the VF that is being requested to reset.
*/
#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \
UINT32_C(0x3)
@@ -6066,6 +6657,12 @@ struct hwrm_func_qcaps_output {
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_HOT_RESET_CAPABLE \
UINT32_C(0x400000)
+ /*
+ * This flag will be set to 1 by the FW if FW supports adapter error
+ * recovery.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERROR_RECOVERY_CAPABLE \
+ UINT32_C(0x800000)
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no
@@ -6813,8 +7410,7 @@ struct hwrm_func_cfg_input {
* resident HWRM clients, only the parent PF driver shall be allowed
* to initiate this change on one of its children VFs. If this bit is
* set to 1, then the VF that is being configured is requested to be
- * trusted. If this bit is set to 0, then the VF that is being configured
- * is requested to be not trusted.
+ * trusted.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_ENABLE \
UINT32_C(0x200000)
@@ -6825,6 +7421,25 @@ struct hwrm_func_cfg_input {
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_DYNAMIC_TX_RING_ALLOC \
UINT32_C(0x400000)
+ /*
+ * This bit requests that the firmware test to see if all the assets
+ * requested in this command (i.e. number of NQ rings) are available.
+ * The firmware will return an error if the requested assets are
+ * not available. The firwmare will NOT reserve the assets if they
+ * are available.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_NQ_ASSETS_TEST \
+ UINT32_C(0x800000)
+ /*
+ * This configuration change can be initiated by a PF driver. This
+ * configuration request shall be targeted to a VF. From local host
+ * resident HWRM clients, only the parent PF driver shall be allowed
+ * to initiate this change on one of its children VFs. If this bit is
+ * set to 1, then the VF that is being configured is requested to be
+ * untrusted.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_TRUSTED_VF_DISABLE \
+ UINT32_C(0x1000000)
uint32_t enables;
/*
* This bit must be '1' for the mtu field to be
@@ -7593,6 +8208,19 @@ struct hwrm_func_drv_rgtr_input {
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_HOT_RESET_SUPPORT \
UINT32_C(0x10)
+ /*
+ * When this bit is 1, the function is indicating the support of the
+ * error recovery capability. Error recovery support will be used by
+ * firmware only if all the driver instances support error recovery
+ * process. By setting this bit, driver is indicating support for
+ * corresponding async event completion message. These will be
+ * delivered to the driver even if they did not register for it.
+ * If supported, after receiving reset notify async event with fatal
+ * flag set in event data1, then all the drivers have to tear down
+ * their resources without sending any HWRM commands to FW.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_ERROR_RECOVERY_SUPPORT \
+ UINT32_C(0x20)
uint32_t enables;
/*
* This bit must be '1' for the os_type field to be
@@ -10270,17 +10898,384 @@ struct hwrm_func_backing_store_qcfg_output {
uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as 1
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
} __attribute__((packed));
-/***********************
- * hwrm_func_vlan_qcfg *
- ***********************/
+/****************************
+ * hwrm_error_recovery_qcfg *
+ ****************************/
+
+
+/* hwrm_error_recovery_qcfg_input (size:192b/24B) */
+struct hwrm_error_recovery_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint8_t unused_0[8];
+} __attribute__((packed));
+
+/* hwrm_error_recovery_qcfg_output (size:1664b/208B) */
+struct hwrm_error_recovery_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When this flag is set to 1, error recovery will be initiated
+ * through master function driver.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FLAGS_HOST UINT32_C(0x1)
+ /*
+ * When this flag is set to 1, error recovery will be performed
+ * through Co processor.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FLAGS_CO_CPU UINT32_C(0x2)
+ /*
+ * Driver Polling frequency. This value is in units of 100msec.
+ * Typical value would be 10 to indicate 1sec.
+ * Drivers can poll FW health status, Heartbeat, reset_counter with
+ * this frequency.
+ */
+ uint32_t driver_polling_freq;
+ /*
+ * This value is in units of 100msec.
+ * Typical value would be 30 to indicate 3sec.
+ * Master function wait period from detecting a fatal error to
+ * initiating reset. In this time period Master PF expects every
+ * active driver will detect fatal error.
+ */
+ uint32_t master_func_wait_period;
+ /*
+ * This value is in units of 100msec.
+ * Typical value would be 50 to indicate 5sec.
+ * Normal function wait period from fatal error detection to
+ * polling FW health status. In this time period, drivers should not
+ * do any PCIe MMIO transaction and should not send any HWRM commands.
+ */
+ uint32_t normal_func_wait_period;
+ /*
+ * This value is in units of 100msec.
+ * Typical value would be 20 to indicate 2sec.
+ * This field indicates that, master function wait period after chip
+ * reset. After this time, master function should reinitialize with
+ * FW.
+ */
+ uint32_t master_func_wait_period_after_reset;
+ /*
+ * This value is in units of 100msec.
+ * Typical value would be 60 to indicate 6sec.
+ * This field is applicable to both master and normal functions.
+ * Even after chip reset, if FW status not changed to ready,
+ * then all the functions can poll for this much time and bailout.
+ */
+ uint32_t max_bailout_time_after_reset;
+ /*
+ * FW health status register.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates upper 30bits of the register address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t fw_health_status_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEALTH_STATUS_REG_ADDR_SFT \
+ 2
+ /*
+ * FW HeartBeat register.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t fw_heartbeat_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_HEARTBEAT_REG_ADDR_SFT \
+ 2
+ /*
+ * FW reset counter.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t fw_reset_cnt_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_FW_RESET_CNT_REG_ADDR_SFT \
+ 2
+ /*
+ * Reset Inprogress Register address for PFs.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t reset_inprogress_reg;
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_SFT \
+ 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_INPROGRESS_REG_ADDR_SFT \
+ 2
+ /* This field indicates the mask value for reset_inprogress_reg. */
+ uint32_t reset_inprogress_reg_mask;
+ uint8_t unused_0[3];
+ /*
+ * Array of registers and value count to reset the Chip
+ * Each array count has reset_reg, reset_reg_val, delay_after_reset
+ * in TLV format. Depending upon Chip type, number of reset registers
+ * will vary. Drivers have to write reset_reg_val in the reset_reg
+ * location in the same sequence in order to recover from a fatal
+ * error.
+ */
+ uint8_t reg_array_cnt;
+ /*
+ * Reset register.
+ * Lower 2 bits indicates address space location and upper 30 bits
+ * indicates actual address.
+ * A value of 0xFFFF-FFFF indicates this register does not exist.
+ */
+ uint32_t reset_reg[16];
+ /* Lower 2 bits indicates address space location. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_MASK \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_SFT 0
+ /*
+ * If value is 0, this register is located in PCIe config space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_PCIE_CFG \
+ UINT32_C(0x0)
+ /*
+ * If value is 1, this register is located in GRC address space.
+ * Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_GRC \
+ UINT32_C(0x1)
+ /*
+ * If value is 2, this register is located in first BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR0 \
+ UINT32_C(0x2)
+ /*
+ * If value is 3, this register is located in second BAR address
+ * space. Drivers have to map appropriate window to access this
+ * register.
+ */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR1 \
+ UINT32_C(0x3)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_LAST \
+ HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SPACE_BAR1
+ /* Upper 30bits of the register address. */
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_MASK \
+ UINT32_C(0xfffffffc)
+ #define HWRM_ERROR_RECOVERY_QCFG_OUTPUT_RESET_REG_ADDR_SFT 2
+ /* Value to be written in reset_reg to reset the controller. */
+ uint32_t reset_reg_val[16];
+ /*
+ * This value is in units of 1msec.
+ * Typical value would be 10 to indicate 10msec.
+ * Some of the operations like Core reset require delay before
+ * accessing PCIE MMIO register space.
+ * If this value is non-zero, drivers have to wait for
+ * this much time after writing reset_reg_val in reset_reg.
+ */
+ uint8_t delay_after_reset[16];
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/***********************
+ * hwrm_func_vlan_qcfg *
+ ***********************/
/* hwrm_func_vlan_qcfg_input (size:192b/24B) */
@@ -10894,6 +11889,12 @@ struct hwrm_func_drv_if_change_output {
*/
#define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_RESC_CHANGE \
UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates that the firmware got changed / reset.
+ * The driver should do complete re-initialization when that bit is set.
+ */
+ #define HWRM_FUNC_DRV_IF_CHANGE_OUTPUT_FLAGS_HOT_FW_RESET_DONE \
+ UINT32_C(0x2)
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
@@ -14166,6 +15167,9 @@ struct hwrm_port_phy_qcaps_output {
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \
UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_200GB \
+ UINT32_C(0x4000)
/*
* This is a bit mask to indicate what speeds are supported
* for autonegotiation on this link.
@@ -14215,6 +15219,9 @@ struct hwrm_port_phy_qcaps_output {
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \
UINT32_C(0x2000)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_200GB \
+ UINT32_C(0x4000)
/*
* This is a bit mask to indicate what speeds are supported
* for EEE on this link.
@@ -14281,13 +15288,13 @@ struct hwrm_port_phy_qcaps_output {
#define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24
} __attribute__((packed));
-/*********************
- * hwrm_port_led_cfg *
- *********************/
+/****************************
+ * hwrm_port_phy_mdio_write *
+ ****************************/
-/* hwrm_port_led_cfg_input (size:512b/64B) */
-struct hwrm_port_led_cfg_input {
+/* hwrm_port_phy_mdio_write_input (size:320b/40B) */
+struct hwrm_port_phy_mdio_write_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -14315,46 +15322,198 @@ struct hwrm_port_led_cfg_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t enables;
+ /* Reserved for future use. */
+ uint32_t unused_0[2];
+ /* Port ID of port. */
+ uint16_t port_id;
+ /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */
+ uint8_t phy_addr;
+ /* 8-bit device address. */
+ uint8_t dev_addr;
+ /* 16-bit register address. */
+ uint16_t reg_addr;
+ /* 16-bit register data. */
+ uint16_t reg_data;
+ /*
+ * When this bit is set to 1 a Clause 45 mdio access is done.
+ * when this bit is set to 0 a Clause 22 mdio access is done.
+ */
+ uint8_t cl45_mdio;
+ /* */
+ uint8_t unused_1[7];
+} __attribute__((packed));
+
+/* hwrm_port_phy_mdio_write_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_write_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
/*
- * This bit must be '1' for the led0_id field to be
- * configured.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \
- UINT32_C(0x1)
+ uint8_t valid;
+} __attribute__((packed));
+
+/***************************
+ * hwrm_port_phy_mdio_read *
+ ***************************/
+
+
+/* hwrm_port_phy_mdio_read_input (size:256b/32B) */
+struct hwrm_port_phy_mdio_read_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * This bit must be '1' for the led0_state field to be
- * configured.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \
- UINT32_C(0x2)
+ uint16_t cmpl_ring;
/*
- * This bit must be '1' for the led0_color field to be
- * configured.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \
- UINT32_C(0x4)
+ uint16_t seq_id;
/*
- * This bit must be '1' for the led0_blink_on field to be
- * configured.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
*/
- #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \
- UINT32_C(0x8)
+ uint16_t target_id;
/*
- * This bit must be '1' for the led0_blink_off field to be
- * configured.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \
- UINT32_C(0x10)
+ uint64_t resp_addr;
+ /* Reserved for future use. */
+ uint32_t unused_0[2];
+ /* Port ID of port. */
+ uint16_t port_id;
+ /* If phy_address is 0xFF, port_id will be used to derive phy_addr. */
+ uint8_t phy_addr;
+ /* 8-bit device address. */
+ uint8_t dev_addr;
+ /* 16-bit register address. */
+ uint16_t reg_addr;
/*
- * This bit must be '1' for the led0_group_id field to be
- * configured.
+ * When this bit is set to 1 a Clause 45 mdio access is done.
+ * when this bit is set to 0 a Clause 22 mdio access is done.
*/
- #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \
- UINT32_C(0x20)
+ uint8_t cl45_mdio;
+ /* */
+ uint8_t unused_1;
+} __attribute__((packed));
+
+/* hwrm_port_phy_mdio_read_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_read_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* 16-bit register data. */
+ uint16_t reg_data;
+ uint8_t unused_0[5];
/*
- * This bit must be '1' for the led1_id field to be
- * configured.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*********************
+ * hwrm_port_led_cfg *
+ *********************/
+
+
+/* hwrm_port_led_cfg_input (size:512b/64B) */
+struct hwrm_port_led_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the led0_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the led0_state field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the led0_color field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the led0_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the led0_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the led0_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the led1_id field to be
+ * configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID \
UINT32_C(0x40)
@@ -20644,7 +21803,9 @@ struct hwrm_ring_reset_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ uint8_t unused_0[4];
+ /* Position of consumer index after ring reset completes. */
+ uint8_t consumer_idx[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -21209,6 +22370,26 @@ struct hwrm_ring_grp_free_output {
*/
uint8_t valid;
} __attribute__((packed));
+/*
+ * special reserved flow ID to identify per function default
+ * flows for vSwitch offload
+ */
+#define DEFAULT_FLOW_ID 0xFFFFFFFFUL
+/*
+ * special reserved flow ID to identify per function RoCEv1
+ * flows
+ */
+#define ROCEV1_FLOW_ID 0xFFFFFFFEUL
+/*
+ * special reserved flow ID to identify per function RoCEv2
+ * flows
+ */
+#define ROCEV2_FLOW_ID 0xFFFFFFFDUL
+/*
+ * special reserved flow ID to identify per function RoCEv2
+ * CNP flows
+ */
+#define ROCEV2_CNP_FLOW_ID 0xFFFFFFFCUL
/****************************
* hwrm_cfa_l2_filter_alloc *
@@ -22968,6 +24149,13 @@ struct hwrm_cfa_encap_record_alloc_input {
/* Setting of this flag indicates the applicability to the loopback path. */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \
UINT32_C(0x1)
+ /*
+ * Setting of this flag indicates this encap record is external encap record.
+ * Resetting of this flag indicates this flag is internal encap record and
+ * this is the default setting.
+ */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_EXTERNAL \
+ UINT32_C(0x2)
/* Encapsulation Type. */
uint8_t encap_type;
/* Virtual eXtensible Local Area Network (VXLAN) */
@@ -23003,8 +24191,11 @@ struct hwrm_cfa_encap_record_alloc_input {
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2_ETYPE \
UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \
- HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2_ETYPE
+ HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6
uint8_t unused_0[3];
/* This value is encap data used for the given encap type. */
uint32_t encap_data[20];
@@ -23144,6 +24335,12 @@ struct hwrm_cfa_ntuple_filter_alloc_input {
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
UINT32_C(0x4)
+ /*
+ * Setting of this flag indicates that the dest_id field contains function ID.
+ * If this is not set it indicates dest_id is VNIC or VPORT.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_FID \
+ UINT32_C(0x8)
uint32_t enables;
/*
* This bit must be '1' for the l2_filter_id field to be
@@ -23605,7 +24802,13 @@ struct hwrm_cfa_ntuple_filter_cfg_input {
*/
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
UINT32_C(0x4)
- uint8_t unused_0[4];
+ uint32_t flags;
+ /*
+ * Setting this bit to 1 indicates that dest_id field contains FID.
+ * Setting this to 0 indicates that dest_id field contains VNIC or VPORT.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_FID \
+ UINT32_C(0x1)
/* This value is an opaque id into CFA data structures. */
uint64_t ntuple_filter_id;
/*
@@ -24090,6 +25293,118 @@ struct hwrm_cfa_em_flow_free_output {
uint8_t valid;
} __attribute__((packed));
+/************************
+ * hwrm_cfa_meter_qcaps *
+ ************************/
+
+
+/* hwrm_cfa_meter_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_meter_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __attribute__((packed));
+
+/* hwrm_cfa_meter_qcaps_output (size:320b/40B) */
+struct hwrm_cfa_meter_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the clock at which the Meter is running with.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_MASK UINT32_C(0xf)
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_SFT 0
+ /* 375 MHz */
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_375MHZ UINT32_C(0x0)
+ /* 625 MHz */
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ UINT32_C(0x1)
+ #define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_LAST \
+ HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_625MHZ
+ uint8_t unused_0[4];
+ /*
+ * The minimum guaranteed number of tx meter profiles supported
+ * for this function.
+ */
+ uint16_t min_tx_profile;
+ /*
+ * The maximum non-guaranteed number of tx meter profiles supported
+ * for this function.
+ */
+ uint16_t max_tx_profile;
+ /*
+ * The minimum guaranteed number of rx meter profiles supported
+ * for this function.
+ */
+ uint16_t min_rx_profile;
+ /*
+ * The maximum non-guaranteed number of rx meter profiles supported
+ * for this function.
+ */
+ uint16_t max_rx_profile;
+ /*
+ * The minimum guaranteed number of tx meter instances supported
+ * for this function.
+ */
+ uint16_t min_tx_instance;
+ /*
+ * The maximum non-guaranteed number of tx meter instances supported
+ * for this function.
+ */
+ uint16_t max_tx_instance;
+ /*
+ * The minimum guaranteed number of rx meter instances supported
+ * for this function.
+ */
+ uint16_t min_rx_instance;
+ /*
+ * The maximum non-guaranteed number of rx meter instances supported
+ * for this function.
+ */
+ uint16_t max_rx_instance;
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
/********************************
* hwrm_cfa_meter_profile_alloc *
********************************/
@@ -24200,11 +25515,11 @@ struct hwrm_cfa_meter_profile_alloc_input {
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \
+ /* Raw value */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \
(UINT32_C(0x7) << 29)
#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW
/* A meter burst size specified in bytes. */
uint32_t commit_burst;
/* The bandwidth value. */
@@ -24243,7 +25558,7 @@ struct hwrm_cfa_meter_profile_alloc_input {
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
- /* Invalid unit */
+ /* Invalid value */
#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
@@ -24286,11 +25601,11 @@ struct hwrm_cfa_meter_profile_alloc_input {
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \
+ /* Raw unit */
+ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \
(UINT32_C(0x7) << 29)
#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID
+ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW
/* A meter burst size specified in bytes. */
uint32_t excess_peak_burst;
/* The bandwidth value. */
@@ -24564,11 +25879,11 @@ struct hwrm_cfa_meter_profile_cfg_input {
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \
+ /* Raw value */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW \
(UINT32_C(0x7) << 29)
#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_RAW
/* A meter burst size specified in bytes. */
uint32_t commit_burst;
/* The bandwidth value. */
@@ -24607,7 +25922,7 @@ struct hwrm_cfa_meter_profile_cfg_input {
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
- /* Invalid unit */
+ /* Invalid value */
#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
#define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \
@@ -24650,11 +25965,11 @@ struct hwrm_cfa_meter_profile_cfg_input {
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \
+ /* Raw unit */
+ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW \
(UINT32_C(0x7) << 29)
#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \
- HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID
+ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_RAW
/* A meter burst size specified in bytes. */
uint32_t excess_peak_burst;
/* The bandwidth value. */
@@ -24775,7 +26090,7 @@ struct hwrm_cfa_meter_instance_alloc_input {
/* This value identifies a meter profile in CFA. */
uint16_t meter_profile_id;
/*
- * A value of 0xfff is considered invalid and implies the
+ * A value of 0xffff is considered invalid and implies the
* profile is not configured.
*/
#define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID \
@@ -24798,7 +26113,7 @@ struct hwrm_cfa_meter_instance_alloc_output {
/* This value identifies a meter instance in CFA. */
uint16_t meter_instance_id;
/*
- * A value of 0xfff is considered invalid and implies the
+ * A value of 0xffff is considered invalid and implies the
* instance is not configured.
*/
#define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID \
@@ -24816,13 +26131,13 @@ struct hwrm_cfa_meter_instance_alloc_output {
uint8_t valid;
} __attribute__((packed));
-/********************************
- * hwrm_cfa_meter_instance_free *
- ********************************/
+/*******************************
+ * hwrm_cfa_meter_instance_cfg *
+ *******************************/
-/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */
-struct hwrm_cfa_meter_instance_free_input {
+/* hwrm_cfa_meter_instance_cfg_input (size:192b/24B) */
+struct hwrm_cfa_meter_instance_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -24856,31 +26171,39 @@ struct hwrm_cfa_meter_instance_free_input {
* This enumeration is used for resources that are similar for both
* TX and RX paths of the chip.
*/
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1)
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
/* tx path */
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_TX \
UINT32_C(0x0)
/* rx path */
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX \
UINT32_C(0x1)
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_INSTANCE_CFG_INPUT_FLAGS_PATH_RX
uint8_t unused_0;
- /* This value identifies a meter instance in CFA. */
- uint16_t meter_instance_id;
/*
- * A value of 0xfff is considered invalid and implies the
- * instance is not configured.
+ * This value identifies a new meter profile to be associated with
+ * the meter instance specified in this command.
*/
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \
+ uint16_t meter_profile_id;
+ /*
+ * A value of 0xffff is considered invalid and implies the
+ * profile is not configured.
+ */
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID \
UINT32_C(0xffff)
- #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \
- HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID
- uint8_t unused_1[4];
+ #define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID
+ /*
+ * This value identifies the ID of a meter instance that needs to be updated with
+ * a new meter profile specified in this command.
+ */
+ uint16_t meter_instance_id;
+ uint8_t unused_1[2];
} __attribute__((packed));
-/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */
-struct hwrm_cfa_meter_instance_free_output {
+/* hwrm_cfa_meter_instance_cfg_output (size:128b/16B) */
+struct hwrm_cfa_meter_instance_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -24900,13 +26223,13 @@ struct hwrm_cfa_meter_instance_free_output {
uint8_t valid;
} __attribute__((packed));
-/*******************************
- * hwrm_cfa_decap_filter_alloc *
- *******************************/
+/********************************
+ * hwrm_cfa_meter_instance_free *
+ ********************************/
-/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */
-struct hwrm_cfa_decap_filter_alloc_input {
+/* hwrm_cfa_meter_instance_free_input (size:192b/24B) */
+struct hwrm_cfa_meter_instance_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -24934,22 +26257,106 @@ struct hwrm_cfa_decap_filter_alloc_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /* ovs_tunnel is 1 b */
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \
- UINT32_C(0x1)
- uint32_t enables;
+ uint8_t flags;
/*
- * This bit must be '1' for the tunnel_type field to be
- * configured.
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \
UINT32_C(0x1)
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX
+ uint8_t unused_0;
+ /* This value identifies a meter instance in CFA. */
+ uint16_t meter_instance_id;
/*
- * This bit must be '1' for the tunnel_id field to be
- * configured.
+ * A value of 0xfff is considered invalid and implies the
+ * instance is not configured.
*/
- #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \
+ UINT32_C(0xffff)
+ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \
+ HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID
+ uint8_t unused_1[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */
+struct hwrm_cfa_meter_instance_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*******************************
+ * hwrm_cfa_decap_filter_alloc *
+ *******************************/
+
+
+/* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */
+struct hwrm_cfa_decap_filter_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* ovs_tunnel is 1 b */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \
+ UINT32_C(0x1)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the tunnel_type field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the tunnel_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \
UINT32_C(0x2)
/*
* This bit must be '1' for the src_macaddr field to be
@@ -25375,6 +26782,9 @@ struct hwrm_cfa_flow_alloc_input {
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_MATCH_VXLAN_IP_VNI \
UINT32_C(0x100)
+ /* Set to 1 to indicate vhost_id is specified in the outer_vlan_tci field. */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_VHOST_ID_USE_VLAN \
+ UINT32_C(0x200)
/*
* Tx Flow: vf fid.
* Rx Flow: pf fid.
@@ -25430,6 +26840,13 @@ struct hwrm_cfa_flow_alloc_input {
/* If set to 1, flow aging is enabled for this flow. */
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FLOW_AGING_ENABLED \
UINT32_C(0x800)
+ /*
+ * If set to 1 an attempt will be made to try to offload this flow to the
+ * most optimal flow table resource. If set to 0, the flow will be
+ * placed to the default flow table resource.
+ */
+ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \
+ UINT32_C(0x1000)
/*
* Tx Flow: pf or vf fid.
* Rx Flow: vf fid.
@@ -25569,7 +26986,8 @@ struct hwrm_cfa_flow_alloc_output {
uint32_t flow_id;
/* This value identifies a set of CFA data structures used for a flow. */
uint64_t ext_flow_handle;
- uint8_t unused_1[7];
+ uint32_t flow_counter_id;
+ uint8_t unused_1[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -25646,6 +27064,229 @@ struct hwrm_cfa_flow_free_output {
uint8_t valid;
} __attribute__((packed));
+/* hwrm_cfa_flow_action_data (size:960b/120B) */
+struct hwrm_cfa_flow_action_data {
+ uint16_t action_flags;
+ /* Setting of this flag indicates accept action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FWD \
+ UINT32_C(0x1)
+ /* Setting of this flag indicates recycle action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_RECYCLE \
+ UINT32_C(0x2)
+ /* Setting of this flag indicates drop action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DROP \
+ UINT32_C(0x4)
+ /* Setting of this flag indicates meter action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_METER \
+ UINT32_C(0x8)
+ /* Setting of this flag indicates tunnel action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL \
+ UINT32_C(0x10)
+ /*
+ * If set to 1 and flow direction is TX, it indicates decap of L2 header
+ * and encap of tunnel header. If set to 1 and flow direction is RX, it
+ * indicates decap of tunnel header and encap L2 header.
+ */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL_IP \
+ UINT32_C(0x20)
+ /* Setting of this flag indicates ttl decrement action. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TTL_DECREMENT \
+ UINT32_C(0x40)
+ /* If set to 1, flow aging is enabled for this flow. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FLOW_AGING_ENABLED \
+ UINT32_C(0x80)
+ /* Setting of this flag indicates encap action.. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_ENCAP \
+ UINT32_C(0x100)
+ /* Setting of this flag indicates decap action.. */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DECAP \
+ UINT32_C(0x200)
+ /* Meter id. */
+ uint16_t act_meter_id;
+ /* VNIC id. */
+ uint16_t vnic_id;
+ /* vport number. */
+ uint16_t vport_id;
+ /* The NAT source/destination. */
+ uint16_t nat_port;
+ uint16_t unused_0[3];
+ /* NAT IPv4/IPv6 address. */
+ uint32_t nat_ip_address[4];
+ /* Encapsulation Type. */
+ uint8_t encap_type;
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_NVGRE UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_MPLS UINT32_C(0x6)
+ /* VLAN */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VLAN UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_V4 UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE_V1 UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2_ETYPE UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6 UINT32_C(0xc)
+ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_LAST \
+ HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6
+ uint8_t unused[7];
+ /* This value is encap data for the associated encap type. */
+ uint32_t encap_data[20];
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_tunnel_hdr_data (size:64b/8B) */
+struct hwrm_cfa_flow_tunnel_hdr_data {
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Non-tunnel */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2GRE \
+ UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPIP \
+ UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_MPLS \
+ UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_STT \
+ UINT32_C(0x7)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE \
+ UINT32_C(0x8)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_LAST \
+ HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_ANYTUNNEL
+ uint8_t unused[3];
+ /*
+ * Tunnel identifier.
+ * Virtual Network Identifier (VNI).
+ */
+ uint32_t tunnel_id;
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_l4_key_data (size:64b/8B) */
+struct hwrm_cfa_flow_l4_key_data {
+ /* The value of source port. */
+ uint16_t l4_src_port;
+ /* The value of destination port. */
+ uint16_t l4_dst_port;
+ uint32_t unused;
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_l3_key_data (size:512b/64B) */
+struct hwrm_cfa_flow_l3_key_data {
+ /* The value of ip protocol. */
+ uint8_t ip_protocol;
+ uint8_t unused_0[7];
+ /* The value of destination IPv4/IPv6 address. */
+ uint32_t ip_dst[4];
+ /* The source IPv4/IPv6 address. */
+ uint32_t ip_src[4];
+ /* NAT IPv4/IPv6 address. */
+ uint32_t nat_ip_address[4];
+ uint32_t unused[2];
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_l2_key_data (size:448b/56B) */
+struct hwrm_cfa_flow_l2_key_data {
+ /* Destination MAC address. */
+ uint16_t dmac[3];
+ uint16_t unused_0;
+ /* Source MAC address. */
+ uint16_t smac[3];
+ uint16_t unused_1;
+ /* L2 header re-write Destination MAC address. */
+ uint16_t l2_rewrite_dmac[3];
+ uint16_t unused_2;
+ /* L2 header re-write Source MAC address. */
+ uint16_t l2_rewrite_smac[3];
+ /* Ethertype. */
+ uint16_t ethertype;
+ /* Number of VLAN tags. */
+ uint16_t num_vlan_tags;
+ /* VLAN tpid. */
+ uint16_t l2_rewrite_vlan_tpid;
+ /* VLAN tci. */
+ uint16_t l2_rewrite_vlan_tci;
+ uint8_t unused_3[2];
+ /* Outer VLAN TPID. */
+ uint16_t ovlan_tpid;
+ /* Outer VLAN TCI. */
+ uint16_t ovlan_tci;
+ /* Inner VLAN TPID. */
+ uint16_t ivlan_tpid;
+ /* Inner VLAN TCI. */
+ uint16_t ivlan_tci;
+ uint8_t unused[8];
+} __attribute__((packed));
+
+/* hwrm_cfa_flow_key_data (size:4160b/520B) */
+struct hwrm_cfa_flow_key_data {
+ /* Flow associated tunnel L2 header key info. */
+ uint32_t t_l2_key_data[14];
+ /* Flow associated tunnel L2 header mask info. */
+ uint32_t t_l2_key_mask[14];
+ /* Flow associated tunnel L3 header key info. */
+ uint32_t t_l3_key_data[16];
+ /* Flow associated tunnel L3 header mask info. */
+ uint32_t t_l3_key_mask[16];
+ /* Flow associated tunnel L4 header key info. */
+ uint32_t t_l4_key_data[2];
+ /* Flow associated tunnel L4 header mask info. */
+ uint32_t t_l4_key_mask[2];
+ /* Flow associated tunnel header info. */
+ uint32_t tunnel_hdr[2];
+ /* Flow associated L2 header key info. */
+ uint32_t l2_key_data[14];
+ /* Flow associated L2 header mask info. */
+ uint32_t l2_key_mask[14];
+ /* Flow associated L3 header key info. */
+ uint32_t l3_key_data[16];
+ /* Flow associated L3 header mask info. */
+ uint32_t l3_key_mask[16];
+ /* Flow associated L4 header key info. */
+ uint32_t l4_key_data[2];
+ /* Flow associated L4 header mask info. */
+ uint32_t l4_key_mask[2];
+} __attribute__((packed));
+
/**********************
* hwrm_cfa_flow_info *
**********************/
@@ -25703,7 +27344,7 @@ struct hwrm_cfa_flow_info_input {
uint64_t ext_flow_handle;
} __attribute__((packed));
-/* hwrm_cfa_flow_info_output (size:448b/56B) */
+/* hwrm_cfa_flow_info_output (size:5632b/704B) */
struct hwrm_cfa_flow_info_output {
/* The specific error status for the command. */
uint16_t error_code;
@@ -25713,8 +27354,11 @@ struct hwrm_cfa_flow_info_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* flags is 8 b */
uint8_t flags;
+ /* When set to 1, indicates the configuration is the TX flow. */
+ #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ /* When set to 1, indicates the configuration is the RX flow. */
+ #define HWRM_CFA_FLOW_INFO_OUTPUT_FLAGS_PATH_RX UINT32_C(0x2)
/* profile is 8 b */
uint8_t profile;
/* src_fid is 16 b */
@@ -25737,7 +27381,12 @@ struct hwrm_cfa_flow_info_output {
uint32_t tunnel_handle;
/* The flow aging timer for the flow, the unit is 100 milliseconds */
uint16_t flow_timer;
- uint8_t unused_0[5];
+ uint8_t unused_0[6];
+ /* Flow associated L2, L3 and L4 headers info. */
+ uint32_t flow_key_data[130];
+ /* Flow associated action record info. */
+ uint32_t flow_action_info[30];
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -25753,7 +27402,7 @@ struct hwrm_cfa_flow_info_output {
***********************/
-/* hwrm_cfa_flow_flush_input (size:192b/24B) */
+/* hwrm_cfa_flow_flush_input (size:256b/32B) */
struct hwrm_cfa_flow_flush_input {
/* The HWRM command request type. */
uint16_t req_type;
@@ -25782,8 +27431,73 @@ struct hwrm_cfa_flow_flush_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* flags is 32 b */
uint32_t flags;
- uint8_t unused_0[4];
+ /*
+ * Set to 1 to indicate the page size, page layers, and flow_handle_table_dma_addr
+ * fields are valid. The flow flush operation should only flush the flows from the
+ * flow table specified. This flag is set to 0 by older driver. For older firmware,
+ * setting this flag has no effect.
+ */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_TABLE_VALID \
+ UINT32_C(0x1)
+ /*
+ * Set to 1 to indicate flow flush operation to cleanup all the flows, meters, CFA
+ * context memory tables..etc. This flag is set to 0 by older driver. For older firmware,
+ * setting this flag has no effect.
+ */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \
+ UINT32_C(0x2)
+ /*
+ * This specifies the size of flow handle entries provided by the driver
+ * in the flow table specified below. Only two flow handle size enums are defined.
+ */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_MASK \
+ UINT32_C(0xc0000000)
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_SFT \
+ 30
+ /* The flow handle is 16bit */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_16BIT \
+ (UINT32_C(0x0) << 30)
+ /* The flow handle is 64bit */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT \
+ (UINT32_C(0x1) << 30)
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_LAST \
+ HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_FLOW_HND_64BIT
+ /* Specify page size of the flow table memory. */
+ uint8_t page_size;
+ /* The page size is 4K */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* The page size is 8K */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* The page size is 64K */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* The page size is 256K */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* The page size is 1M */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* The page size is 2M */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* The page size is 4M */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* The page size is 1G */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_SIZE_1G
+ /* FLow table memory indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2
+ /* number of flows in the flow table */
+ uint16_t num_flows;
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
} __attribute__((packed));
/* hwrm_cfa_flow_flush_output (size:128b/16B) */
@@ -25983,7 +27697,12 @@ struct hwrm_cfa_flow_aging_timer_reset_input {
uint64_t resp_addr;
/* Flow record index. */
uint16_t flow_handle;
- uint8_t unused_0[6];
+ uint8_t unused_0[2];
+ /*
+ * New flow timer value for the flow specified in the ext_flow_handle.
+ * The flow timer unit is 100ms.
+ */
+ uint32_t flow_timer;
/* This value identifies a set of CFA data structures used for a flow. */
uint64_t ext_flow_handle;
} __attribute__((packed));
@@ -26244,13 +27963,13 @@ struct hwrm_cfa_flow_aging_qcaps_output {
uint8_t valid;
} __attribute__((packed));
-/**********************
- * hwrm_cfa_pair_info *
- **********************/
+/**********************************
+ * hwrm_cfa_tcp_flag_process_qcfg *
+ **********************************/
-/* hwrm_cfa_pair_info_input (size:448b/56B) */
-struct hwrm_cfa_pair_info_input {
+/* hwrm_cfa_tcp_flag_process_qcfg_input (size:128b/16B) */
+struct hwrm_cfa_tcp_flag_process_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -26278,23 +27997,10 @@ struct hwrm_cfa_pair_info_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /* If this flag is set, lookup by name else lookup by index. */
- #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
- /* If this flag is set, lookup by PF id and VF id. */
- #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2)
- /* Pair table index. */
- uint16_t pair_index;
- /* Pair pf index. */
- uint8_t pair_pfid;
- /* Pair vf index. */
- uint8_t pair_vfid;
- /* Pair name (32 byte string). */
- char pair_name[32];
} __attribute__((packed));
-/* hwrm_cfa_pair_info_output (size:576b/72B) */
-struct hwrm_cfa_pair_info_output {
+/* hwrm_cfa_tcp_flag_process_qcfg_output (size:192b/24B) */
+struct hwrm_cfa_tcp_flag_process_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -26303,22 +28009,100 @@ struct hwrm_cfa_pair_info_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Pair table index. */
- uint16_t next_pair_index;
- /* Pair member a's fid. */
- uint16_t a_fid;
- /* Logical host number. */
- uint8_t host_a_index;
- /* Logical PF number. */
- uint8_t pf_a_index;
- /* Pair member a's Linux logical VF number. */
- uint16_t vf_a_index;
- /* Rx CFA code. */
- uint16_t rx_cfa_code_a;
- /* Tx CFA action. */
- uint16_t tx_cfa_action_a;
- /* Pair member b's fid. */
- uint16_t b_fid;
+ /* The port 0 RX mirror action record ID. */
+ uint16_t rx_ar_id_port0;
+ /* The port 1 RX mirror action record ID. */
+ uint16_t rx_ar_id_port1;
+ /* The port 0 RX action record ID for TX TCP flag packets from loopback path. */
+ uint16_t tx_ar_id_port0;
+ /* The port 1 RX action record ID for TX TCP flag packets from loopback path. */
+ uint16_t tx_ar_id_port1;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/**********************
+ * hwrm_cfa_pair_info *
+ **********************/
+
+
+/* hwrm_cfa_pair_info_input (size:448b/56B) */
+struct hwrm_cfa_pair_info_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* If this flag is set, lookup by name else lookup by index. */
+ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
+ /* If this flag is set, lookup by PF id and VF id. */
+ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2)
+ /* Pair table index. */
+ uint16_t pair_index;
+ /* Pair pf index. */
+ uint8_t pair_pfid;
+ /* Pair vf index. */
+ uint8_t pair_vfid;
+ /* Pair name (32 byte string). */
+ char pair_name[32];
+} __attribute__((packed));
+
+/* hwrm_cfa_pair_info_output (size:576b/72B) */
+struct hwrm_cfa_pair_info_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Pair table index. */
+ uint16_t next_pair_index;
+ /* Pair member a's fid. */
+ uint16_t a_fid;
+ /* Logical host number. */
+ uint8_t host_a_index;
+ /* Logical PF number. */
+ uint8_t pf_a_index;
+ /* Pair member a's Linux logical VF number. */
+ uint16_t vf_a_index;
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code_a;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action_a;
+ /* Pair member b's fid. */
+ uint16_t b_fid;
/* Logical host number. */
uint8_t host_b_index;
/* Logical PF number. */
@@ -26364,13 +28148,645 @@ struct hwrm_cfa_pair_info_output {
uint8_t valid;
} __attribute__((packed));
-/***************************************
- * hwrm_cfa_redirect_query_tunnel_type *
- ***************************************/
+/***************************************
+ * hwrm_cfa_redirect_query_tunnel_type *
+ ***************************************/
+
+
+/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */
+struct hwrm_cfa_redirect_query_tunnel_type_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* The source function id. */
+ uint16_t src_fid;
+ uint8_t unused_0[6];
+} __attribute__((packed));
+
+/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */
+struct hwrm_cfa_redirect_query_tunnel_type_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Tunnel Mask. */
+ uint32_t tunnel_mask;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \
+ UINT32_C(0x1)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \
+ UINT32_C(0x2)
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \
+ UINT32_C(0x4)
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \
+ UINT32_C(0x8)
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \
+ UINT32_C(0x10)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \
+ UINT32_C(0x20)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \
+ UINT32_C(0x40)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \
+ UINT32_C(0x80)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \
+ UINT32_C(0x100)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \
+ UINT32_C(0x200)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \
+ UINT32_C(0x400)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \
+ UINT32_C(0x800)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \
+ UINT32_C(0x1000)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \
+ UINT32_C(0x2000)
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*************************
+ * hwrm_cfa_ctx_mem_rgtr *
+ *************************/
+
+
+/* hwrm_cfa_ctx_mem_rgtr_input (size:256b/32B) */
+struct hwrm_cfa_ctx_mem_rgtr_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 256KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 1MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 1GB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G
+ uint32_t unused_0;
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+} __attribute__((packed));
+
+/* hwrm_cfa_ctx_mem_rgtr_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_rgtr_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
+ */
+ uint16_t ctx_id;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/***************************
+ * hwrm_cfa_ctx_mem_unrgtr *
+ ***************************/
+
+
+/* hwrm_cfa_ctx_mem_unrgtr_input (size:192b/24B) */
+struct hwrm_cfa_ctx_mem_unrgtr_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
+ */
+ uint16_t ctx_id;
+ uint8_t unused_0[6];
+} __attribute__((packed));
+
+/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_unrgtr_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*************************
+ * hwrm_cfa_ctx_mem_qctx *
+ *************************/
+
+
+/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */
+struct hwrm_cfa_ctx_mem_qctx_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
+ */
+ uint16_t ctx_id;
+ uint8_t unused_0[6];
+} __attribute__((packed));
+
+/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */
+struct hwrm_cfa_ctx_mem_qctx_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 256KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 1MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 1GB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G
+ uint8_t unused_0[4];
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/**************************
+ * hwrm_cfa_ctx_mem_qcaps *
+ **************************/
+
+
+/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __attribute__((packed));
+
+/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Indicates the maximum number of context memory which can be registered. */
+ uint16_t max_entries;
+ uint8_t unused_0[6];
+} __attribute__((packed));
+
+/**********************
+ * hwrm_cfa_eem_qcaps *
+ **********************/
+
+
+/* hwrm_cfa_eem_qcaps_input (size:192b/24B) */
+struct hwrm_cfa_eem_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x4)
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* hwrm_cfa_eem_qcaps_output (size:256b/32B) */
+struct hwrm_cfa_eem_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ uint32_t unused_0;
+ uint32_t supported;
+ /*
+ * If set to 1, then EEM KEY0 table is supported using crc32 hash.
+ * If set to 0 EEM KEY0 table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, then EEM KEY1 table is supported using lookup3 hash.
+ * If set to 0 EEM KEY1 table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then EEM External Record table is supported.
+ * If set to 0 EEM External Record table is not supported.
+ * (This table includes action record, EFC pointers, encap pointers)
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, then EEM External Flow Counters table is supported.
+ * If set to 0 EEM External Flow Counters table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
+ UINT32_C(0x8)
+ /*
+ * The maximum number of entries supported by EEM. When configuring the host memory
+ * the number of numbers of entries that can supported are -
+ * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries.
+ * Any value that are not these values, the FW will round down to the closest support
+ * number of entries.
+ */
+ uint32_t max_entries_supported;
+ /* The entry size in bytes of each entry in the KEY0/KEY1 EEM tables. */
+ uint16_t key_entry_size;
+ /* The entry size in bytes of each entry in the RECORD EEM tables. */
+ uint16_t record_entry_size;
+ /* The entry size in bytes of each entry in the EFC EEM tables. */
+ uint16_t efc_entry_size;
+ uint8_t unused_1;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/********************
+ * hwrm_cfa_eem_cfg *
+ ********************/
+
+
+/* hwrm_cfa_eem_cfg_input (size:320b/40B) */
+struct hwrm_cfa_eem_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x4)
+ uint32_t unused_0;
+ /*
+ * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
+ * RECORD, EFC all have the same number of entries and all tables will be configured
+ * using this value. Current minimum value is 32k. Current maximum value is 128M.
+ */
+ uint32_t num_entries;
+ uint32_t unused_1;
+ /* Configured EEM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EEM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EEM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+} __attribute__((packed));
+
+/* hwrm_cfa_eem_cfg_output (size:128b/16B) */
+struct hwrm_cfa_eem_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*********************
+ * hwrm_cfa_eem_qcfg *
+ *********************/
-/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */
-struct hwrm_cfa_redirect_query_tunnel_type_input {
+/* hwrm_cfa_eem_qcfg_input (size:192b/24B) */
+struct hwrm_cfa_eem_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -26398,13 +28814,16 @@ struct hwrm_cfa_redirect_query_tunnel_type_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The source function id. */
- uint16_t src_fid;
- uint8_t unused_0[6];
+ uint32_t flags;
+ /* When set to 1, indicates the configuration is the TX flow. */
+ #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ /* When set to 1, indicates the configuration is the RX flow. */
+ #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ uint32_t unused_0;
} __attribute__((packed));
-/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */
-struct hwrm_cfa_redirect_query_tunnel_type_output {
+/* hwrm_cfa_eem_qcfg_output (size:192b/24B) */
+struct hwrm_cfa_eem_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -26413,50 +28832,219 @@ struct hwrm_cfa_redirect_query_tunnel_type_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Tunnel Mask. */
- uint32_t tunnel_mask;
- /* Non-tunnel */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \
+ uint32_t flags;
+ /* When set to 1, indicates the configuration is the TX flow. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_TX \
UINT32_C(0x1)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \
+ /* When set to 1, indicates the configuration is the RX flow. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_RX \
UINT32_C(0x2)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \
UINT32_C(0x4)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \
+ /* The number of entries the FW has configured for EEM. */
+ uint32_t num_entries;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/*******************
+ * hwrm_cfa_eem_op *
+ *******************/
+
+
+/* hwrm_cfa_eem_op_input (size:192b/24B) */
+struct hwrm_cfa_eem_op_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When set to 1, indicates the host memory which is passed will be
+ * used for the TX flow offload function specified in fid.
+ * Note if this bit is set then the path_rx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the host memory which is passed will be
+ * used for the RX flow offload function specified in fid.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ uint16_t unused_0;
+ /* The number of EEM key table entries to be configured. */
+ uint16_t op;
+ /* This value is reserved and should not be used. */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
+ /*
+ * To properly stop EEM and ensure there are no DMA's, the caller
+ * must disable EEM for the given PF, using this call. This will
+ * safely disable EEM and ensure that all DMA'ed to the
+ * keys/records/efc have been completed.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_DISABLE UINT32_C(0x1)
+ /*
+ * Once the EEM host memory has been configured, EEM options have
+ * been configured. Then the caller should enable EEM for the given
+ * PF. Note once this call has been made, then the EEM mechanism
+ * will be active and DMA's will occur as packets are processed.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2)
+ /*
+ * Clear EEM settings for the given PF so that the register values
+ * are reset back to there initial state.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP UINT32_C(0x3)
+ #define HWRM_CFA_EEM_OP_INPUT_OP_LAST \
+ HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP
+} __attribute__((packed));
+
+/* hwrm_cfa_eem_op_output (size:128b/16B) */
+struct hwrm_cfa_eem_op_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/********************************
+ * hwrm_cfa_adv_flow_mgnt_qcaps *
+ ********************************/
+
+
+/* hwrm_cfa_adv_flow_mgnt_qcaps_input (size:256b/32B) */
+struct hwrm_cfa_adv_flow_mgnt_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t unused_0[4];
+} __attribute__((packed));
+
+/* hwrm_cfa_adv_flow_mgnt_qcaps_output (size:128b/16B) */
+struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * Value of 1 to indicate firmware support 16-bit flow handle.
+ * Value of 0 to indicate firmware not support 16-bit flow handle.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_16BIT_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * Value of 1 to indicate firmware support 64-bit flow handle.
+ * Value of 0 to indicate firmware not support 64-bit flow handle.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_64BIT_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * Value of 1 to indicate firmware support flow batch delete operation through
+ * HWRM_CFA_FLOW_FLUSH command.
+ * Value of 0 to indicate that the firmware does not support flow batch delete
+ * operation.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_BATCH_DELETE_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * Value of 1 to indicate that the firmware support flow reset all operation through
+ * HWRM_CFA_FLOW_FLUSH command.
+ * Value of 0 indicates firmware does not support flow reset all operation.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_RESET_ALL_SUPPORTED \
UINT32_C(0x8)
- /* IP in IP */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \
+ /*
+ * Value of 1 to indicate that firmware supports use of FID as dest_id in
+ * HWRM_CFA_NTUPLE_ALLOC/CFG commands.
+ * Value of 0 indicates firmware does not support use of FID as dest_id.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \
UINT32_C(0x10)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \
+ /*
+ * Value of 1 to indicate that firmware supports TX EEM flows.
+ * Value of 0 indicates firmware does not support TX EEM flows.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_TX_EEM_FLOW_SUPPORTED \
UINT32_C(0x20)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \
+ /*
+ * Value of 1 to indicate that firmware supports RX EEM flows.
+ * Value of 0 indicates firmware does not support RX EEM flows.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \
UINT32_C(0x40)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \
- UINT32_C(0x80)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \
- UINT32_C(0x100)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \
- UINT32_C(0x200)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \
- UINT32_C(0x400)
- /* Any tunneled traffic */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \
- UINT32_C(0x800)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \
- UINT32_C(0x1000)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \
- UINT32_C(0x2000)
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
@@ -26874,7 +29462,11 @@ struct hwrm_stat_ctx_alloc_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* This is the address for statistic block. */
+ /*
+ * This is the address for statistic block.
+ * > For new versions of the chip, this address should be 128B
+ * > aligned.
+ */
uint64_t stats_dma_addr;
/*
* The statistic block update period in ms.
--
2.17.1
next prev parent reply other threads:[~2019-05-24 14:51 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 21:39 [dpdk-dev] [PATCH 00/11] bnxt patchset Ajit Khaparde
2019-05-21 21:39 ` [dpdk-dev] [PATCH 01/11] net/bnxt: move tx bd checking to header file Ajit Khaparde
2019-05-23 11:44 ` Maxime Coquelin
2019-05-21 21:39 ` [dpdk-dev] [PATCH 02/11] net/bnxt: compute and store scattered RX status Ajit Khaparde
2019-05-23 11:47 ` Maxime Coquelin
2019-05-21 21:39 ` [dpdk-dev] [PATCH 03/11] net/bnxt: implement vector mode driver Ajit Khaparde
2019-05-23 12:18 ` Maxime Coquelin
2019-05-23 19:23 ` Lance Richardson
2019-05-21 21:39 ` [dpdk-dev] [PATCH 04/11] net/bnxt: fix double counting VLAN tags Ajit Khaparde
2019-05-23 12:21 ` Maxime Coquelin
2019-05-23 18:53 ` Lance Richardson
2019-05-21 21:39 ` [dpdk-dev] [PATCH 05/11] net/bnxt: fix RSS reta indirection table update Ajit Khaparde
2019-05-21 21:39 ` [dpdk-dev] [PATCH 06/11] net/bnxt: use reta update mask and translate qid to grp id Ajit Khaparde
2019-05-21 21:39 ` [dpdk-dev] [PATCH 07/11] net/bnxt: fix reta query op Ajit Khaparde
2019-05-21 21:39 ` [dpdk-dev] [PATCH 08/11] net/bnxt: update HWRM API Ajit Khaparde
2019-05-21 21:39 ` [dpdk-dev] [PATCH 09/11] net/bnxt: update HWRM version Ajit Khaparde
2019-05-21 21:39 ` [dpdk-dev] [PATCH 10/11] net/bnxt: HWRM version update Ajit Khaparde
2019-05-21 21:39 ` [dpdk-dev] [PATCH 11/11] net/bnxt: update release notes for bnxt Ajit Khaparde
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 00/10] bnxt patchset Lance Richardson
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 01/10] net/bnxt: move tx bd checking to header file Lance Richardson
2019-05-27 9:36 ` Ferruh Yigit
2019-05-27 15:24 ` Ferruh Yigit
2019-05-27 18:50 ` Lance Richardson
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 02/10] net/bnxt: compute and store scattered RX status Lance Richardson
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 03/10] net/bnxt: implement vector mode driver Lance Richardson
2019-05-28 9:05 ` Ferruh Yigit
2019-05-28 9:08 ` Ferruh Yigit
2019-05-28 11:23 ` Lance Richardson
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 04/10] net/bnxt: fix RSS reta indirection table update Lance Richardson
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 05/10] net/bnxt: use reta update mask and translate qid to grp id Lance Richardson
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 06/10] net/bnxt: fix reta query op Lance Richardson
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 07/10] net/bnxt: update HWRM API Lance Richardson
2019-05-24 14:49 ` Lance Richardson [this message]
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 09/10] net/bnxt: HWRM version update Lance Richardson
2019-05-28 9:12 ` Ferruh Yigit
2019-05-28 15:06 ` Lance Richardson
2019-05-24 14:49 ` [dpdk-dev] [PATCH v2 10/10] net/bnxt: update release notes for bnxt Lance Richardson
2019-05-28 9:15 ` Ferruh Yigit
2019-05-28 9:19 ` [dpdk-dev] [PATCH v2 00/10] bnxt patchset Ferruh Yigit
2019-05-28 15:11 ` Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 0/8] " Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 1/8] net/bnxt: update release notes for bnxt Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 2/8] net/bnxt: move Tx bd checking to header file Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 3/8] net/bnxt: compute and store scattered Rx status Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 4/8] net/bnxt: implement vector mode driver Lance Richardson
2019-05-29 6:48 ` Maxime Coquelin
2019-05-29 13:19 ` Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 5/8] net/bnxt: fix RSS RETA indirection table ops Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 6/8] net/bnxt: update HWRM API to version 1.10.0.19 Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 7/8] net/bnxt: update HWRM API to version 1.10.0.48 Lance Richardson
2019-05-28 19:23 ` [dpdk-dev] [PATCH v3 8/8] net/bnxt: update HWRM API to version 1.10.0.74 Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 0/8] bnxt patchset Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 1/8] net/bnxt: update release notes for bnxt Lance Richardson
2019-05-29 18:16 ` Kevin Traynor
2019-05-29 20:28 ` Lance Richardson
2019-05-29 20:35 ` Lance Richardson
2019-05-29 20:38 ` Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 2/8] net/bnxt: move Tx bd checking to header file Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 3/8] net/bnxt: compute and store scattered Rx status Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 4/8] net/bnxt: implement vector mode driver Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 5/8] net/bnxt: fix RSS RETA indirection table ops Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 6/8] net/bnxt: update HWRM API to version 1.10.0.19 Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 7/8] net/bnxt: update HWRM API to version 1.10.0.48 Lance Richardson
2019-05-29 15:02 ` [dpdk-dev] [PATCH v4 8/8] net/bnxt: update HWRM API to version 1.10.0.74 Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 0/8] bnxt patchset Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 1/8] net/bnxt: update release notes for bnxt Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 2/8] net/bnxt: move Tx bd checking to header file Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 3/8] net/bnxt: compute and store scattered Rx status Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 4/8] net/bnxt: implement vector mode driver Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 5/8] net/bnxt: fix RSS RETA indirection table ops Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 6/8] net/bnxt: update HWRM API to version 1.10.0.19 Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 7/8] net/bnxt: update HWRM API to version 1.10.0.48 Lance Richardson
2019-05-29 21:02 ` [dpdk-dev] [PATCH v5 8/8] net/bnxt: update HWRM API to version 1.10.0.74 Lance Richardson
2019-06-04 16:07 ` [dpdk-dev] [PATCH v5 0/8] bnxt patchset Ferruh Yigit
2019-06-14 15:34 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190524144935.18765-9-lance.richardson@broadcom.com \
--to=lance.richardson@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=maxime.coquelin@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).