From: Konstantin Ananyev <konstantin.ananyev@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com,
Konstantin Ananyev <konstantin.ananyev@intel.com>,
stable@dpdk.org
Subject: [dpdk-dev] [PATCH v2 1/5] examples/ipsec-secgw: fix invalid packet length
Date: Thu, 6 Jun 2019 12:51:47 +0100 [thread overview]
Message-ID: <20190606115151.27805-2-konstantin.ananyev@intel.com> (raw)
In-Reply-To: <20190606115151.27805-1-konstantin.ananyev@intel.com>
for packets smaller then 64B some NICs reports pkt_len=64B.
As ipsec-secgw (and librte_ipsec) relies on pkt_len value to determine
payload length, that causes problems for small packets.
To fix the issue, check that pkt_len matches values in IPv4/IPv6 header
and re-adjust pkt_len if necessary.
Fixes: 906257e965b7 ("examples/ipsec-secgw: support IPv6")
Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/ipsec-secgw/ipsec-secgw.c | 59 +++++++++++++++++++++++-------
1 file changed, 46 insertions(+), 13 deletions(-)
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 6c626fa5f..4004f2bc2 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -229,35 +229,68 @@ static struct rte_eth_conf port_conf = {
static struct socket_ctx socket_ctx[NB_SOCKETS];
+static inline void
+adjust_ipv4_pktlen(struct rte_mbuf *m, const struct rte_ipv4_hdr *iph,
+ uint32_t l2_len)
+{
+ uint32_t plen, trim;
+
+ plen = rte_be_to_cpu_16(iph->total_length) + l2_len;
+ if (plen < m->pkt_len) {
+ trim = m->pkt_len - plen;
+ rte_pktmbuf_trim(m, trim);
+ }
+}
+
+static inline void
+adjust_ipv6_pktlen(struct rte_mbuf *m, const struct rte_ipv6_hdr *iph,
+ uint32_t l2_len)
+{
+ uint32_t plen, trim;
+
+ plen = rte_be_to_cpu_16(iph->payload_len) + sizeof(*iph) + l2_len;
+ if (plen < m->pkt_len) {
+ trim = m->pkt_len - plen;
+ rte_pktmbuf_trim(m, trim);
+ }
+}
+
static inline void
prepare_one_packet(struct rte_mbuf *pkt, struct ipsec_traffic *t)
{
- uint8_t *nlp;
- struct rte_ether_hdr *eth;
+ const struct rte_ether_hdr *eth;
+ const struct rte_ipv4_hdr *iph4;
+ const struct rte_ipv6_hdr *iph6;
- eth = rte_pktmbuf_mtod(pkt, struct rte_ether_hdr *);
+ eth = rte_pktmbuf_mtod(pkt, const struct rte_ether_hdr *);
if (eth->ether_type == rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV4)) {
- nlp = (uint8_t *)rte_pktmbuf_adj(pkt, RTE_ETHER_HDR_LEN);
- nlp = RTE_PTR_ADD(nlp, offsetof(struct ip, ip_p));
- if (*nlp == IPPROTO_ESP)
+
+ iph4 = (const struct rte_ipv4_hdr *)rte_pktmbuf_adj(pkt,
+ RTE_ETHER_HDR_LEN);
+ adjust_ipv4_pktlen(pkt, iph4, 0);
+
+ if (iph4->next_proto_id == IPPROTO_ESP)
t->ipsec.pkts[(t->ipsec.num)++] = pkt;
else {
- t->ip4.data[t->ip4.num] = nlp;
+ t->ip4.data[t->ip4.num] = &iph4->next_proto_id;
t->ip4.pkts[(t->ip4.num)++] = pkt;
}
pkt->l2_len = 0;
- pkt->l3_len = sizeof(struct ip);
+ pkt->l3_len = sizeof(*iph4);
} else if (eth->ether_type == rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV6)) {
- nlp = (uint8_t *)rte_pktmbuf_adj(pkt, RTE_ETHER_HDR_LEN);
- nlp = RTE_PTR_ADD(nlp, offsetof(struct ip6_hdr, ip6_nxt));
- if (*nlp == IPPROTO_ESP)
+
+ iph6 = (const struct rte_ipv6_hdr *)rte_pktmbuf_adj(pkt,
+ RTE_ETHER_HDR_LEN);
+ adjust_ipv6_pktlen(pkt, iph6, 0);
+
+ if (iph6->proto == IPPROTO_ESP)
t->ipsec.pkts[(t->ipsec.num)++] = pkt;
else {
- t->ip6.data[t->ip6.num] = nlp;
+ t->ip6.data[t->ip6.num] = &iph6->proto;
t->ip6.pkts[(t->ip6.num)++] = pkt;
}
pkt->l2_len = 0;
- pkt->l3_len = sizeof(struct ip6_hdr);
+ pkt->l3_len = sizeof(*iph6);
} else {
/* Unknown/Unsupported type, drop the packet */
RTE_LOG(ERR, IPSEC, "Unsupported packet type 0x%x\n",
--
2.17.1
next prev parent reply other threads:[~2019-06-06 11:52 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-27 18:44 [dpdk-dev] [PATCH 0/3] examples/ipsec-secgw: support packet fragmentation Konstantin Ananyev
2019-05-27 18:44 ` [dpdk-dev] [PATCH 1/3] examples/ipsec-secgw: fix invalid packet length Konstantin Ananyev
2019-05-27 18:44 ` [dpdk-dev] [PATCH 2/3] examples/ipsec-secgw: support packet fragmentation and reassembly Konstantin Ananyev
2019-05-27 18:44 ` [dpdk-dev] [PATCH 3/3] examples/ipsec-secgw: add multi-segment test cases Konstantin Ananyev
2019-06-06 11:51 ` [dpdk-dev] [PATCH v2 0/5] examples/ipsec-secgw: support packet Konstantin Ananyev
2019-06-06 11:51 ` Konstantin Ananyev [this message]
2019-06-25 13:04 ` [dpdk-dev] [PATCH v2 1/5] examples/ipsec-secgw: fix invalid packet length Akhil Goyal
2019-06-25 13:07 ` Ananyev, Konstantin
2019-06-06 11:51 ` [dpdk-dev] [PATCH v2 2/5] examples/ipsec-secgw: support packet fragmentation and reassembly Konstantin Ananyev
2019-06-06 11:51 ` [dpdk-dev] [PATCH v2 3/5] examples/ipsec-secgw: add multi-segment test cases Konstantin Ananyev
2019-06-06 11:51 ` [dpdk-dev] [PATCH v2 4/5] examples/ipsec-secgw: add bypass test case Konstantin Ananyev
2019-06-06 11:51 ` [dpdk-dev] [PATCH v2 5/5] doc: update ipsec-secgw guide Konstantin Ananyev
2019-06-25 23:16 ` [dpdk-dev] [PATCH v3 0/4] examples/ipsec-secgw: support packet Konstantin Ananyev
2019-06-25 23:16 ` [dpdk-dev] [PATCH v3 1/4] examples/ipsec-secgw: fix invalid packet length Konstantin Ananyev
2019-06-25 23:16 ` [dpdk-dev] [PATCH v3 2/4] examples/ipsec-secgw: support packet fragmentation and reassembly Konstantin Ananyev
2019-06-25 23:16 ` [dpdk-dev] [PATCH v3 3/4] examples/ipsec-secgw: add multi-segment test cases Konstantin Ananyev
2019-06-25 23:16 ` [dpdk-dev] [PATCH v3 4/4] examples/ipsec-secgw: add bypass test case Konstantin Ananyev
2019-07-01 11:43 ` [dpdk-dev] [PATCH v3 0/4] examples/ipsec-secgw: support packet Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190606115151.27805-2-konstantin.ananyev@intel.com \
--to=konstantin.ananyev@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).