From: Fan Zhang <roy.fan.zhang@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, konstantin.ananyev@intel.com,
Fan Zhang <roy.fan.zhang@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>
Subject: [dpdk-dev] [PATCH v3 1/2] lib/ipsec: add support for header construction
Date: Wed, 26 Jun 2019 16:05:08 +0100 [thread overview]
Message-ID: <20190626150509.17442-2-roy.fan.zhang@intel.com> (raw)
In-Reply-To: <20190626150509.17442-1-roy.fan.zhang@intel.com>
Add support for RFC 4301(5.1.2) to update of
Type of service field and Traffic class field
bits inside ipv4/ipv6 packets for outbound cases
and inbound cases which deals with the update of
the DSCP/ENC bits inside each of the fields.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
lib/librte_ipsec/esp_inb.c | 16 +++-
lib/librte_ipsec/esp_outb.c | 3 +-
lib/librte_ipsec/iph.h | 148 +++++++++++++++++++++++++++++++++++--
lib/librte_ipsec/rte_ipsec_sa.h | 25 +++++++
lib/librte_ipsec/sa.c | 17 +++++
lib/librte_ipsec/sa.h | 2 +
lib/librte_net/rte_ip.h | 11 +++
lib/librte_security/rte_security.h | 9 +++
8 files changed, 221 insertions(+), 10 deletions(-)
diff --git a/lib/librte_ipsec/esp_inb.c b/lib/librte_ipsec/esp_inb.c
index fb10b7085..3e1894e13 100644
--- a/lib/librte_ipsec/esp_inb.c
+++ b/lib/librte_ipsec/esp_inb.c
@@ -464,13 +464,15 @@ tun_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
uint32_t hl[num], to[num];
struct esp_tail espt[num];
struct rte_mbuf *ml[num];
+ const uint32_t cofs = sa->ctp.cipher.offset;
+ void *inner_h;
+ const void *outter_h;
/*
* remove icv, esp trailer and high-order
* 32 bits of esn from packet length
*/
const uint32_t tlen = sa->icv_len + sizeof(espt[0]) + sqh_len;
- const uint32_t cofs = sa->ctp.cipher.offset;
/*
* to minimize stalls due to load latency,
@@ -489,9 +491,17 @@ tun_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
if (tun_process_check(mb[i], &ml[i], &to[i], espt[i], adj, tl,
sa->proto) == 0) {
+ outter_h = rte_pktmbuf_mtod_offset(mb[i], uint8_t *,
+ mb[i]->l2_len);
+
/* modify packet's layout */
- tun_process_step2(mb[i], ml[i], hl[i], adj, to[i],
- tl, sqn + k);
+
+ inner_h = tun_process_step2(mb[i], ml[i], hl[i], adj,
+ to[i], tl, sqn + k);
+
+ if ((sa->type & TUN_HDR_MSK) != 0)
+ update_inb_tun_l3_hdr(sa, inner_h, outter_h);
+
/* update mbuf's metadata */
tun_process_step3(mb[i], sa->tx_offload.msk,
sa->tx_offload.val);
diff --git a/lib/librte_ipsec/esp_outb.c b/lib/librte_ipsec/esp_outb.c
index 8c6db3553..0c72a9d5f 100644
--- a/lib/librte_ipsec/esp_outb.c
+++ b/lib/librte_ipsec/esp_outb.c
@@ -152,7 +152,8 @@ outb_tun_pkt_prepare(struct rte_ipsec_sa *sa, rte_be64_t sqc,
rte_memcpy(ph, sa->hdr, sa->hdr_len);
/* update original and new ip header fields */
- update_tun_l3hdr(sa, ph + sa->hdr_l3_off, mb->pkt_len - sqh_len,
+
+ update_outb_tun_l3hdr(sa, ph + sa->hdr_l3_off, ph + hlen, mb->pkt_len,
sa->hdr_l3_off, sqn_low16(sqc));
/* update spi, seqn and iv */
diff --git a/lib/librte_ipsec/iph.h b/lib/librte_ipsec/iph.h
index 62d78b7b1..1bde9daeb 100644
--- a/lib/librte_ipsec/iph.h
+++ b/lib/librte_ipsec/iph.h
@@ -5,14 +5,17 @@
#ifndef _IPH_H_
#define _IPH_H_
-#include <rte_ip.h>
-
/**
* @file iph.h
* Contains functions/structures/macros to manipulate IPv4/IPv6 headers
* used internally by ipsec library.
*/
+#define IPV6_DSCP_MASK (RTE_IP_DSCP_MASK << RTE_IPV6_HDR_TC_SHIFT)
+#define IPV6_ECN_MASK (RTE_IP_ECN_MASK << RTE_IPV6_HDR_TC_SHIFT)
+#define IPV6_TOS_MASK (IPV6_ECN_MASK | IPV6_DSCP_MASK)
+#define IPV6_ECN_CE IPV6_ECN_MASK
+
/*
* Move preceding (L3) headers down to remove ESP header and IV.
*/
@@ -37,6 +40,26 @@ insert_esph(char *np, char *op, uint32_t hlen)
np[i] = op[i];
}
+static inline uint8_t
+get_ipv6_tos(rte_be32_t vtc_flow)
+{
+ uint32_t v;
+
+ v = rte_be_to_cpu_32(vtc_flow);
+ return v >> RTE_IPV6_HDR_TC_SHIFT;
+}
+
+static inline rte_be32_t
+set_ipv6_tos(rte_be32_t vtc_flow, uint32_t tos)
+{
+ uint32_t v;
+
+ v = rte_cpu_to_be_32(tos << RTE_IPV6_HDR_TC_SHIFT);
+ vtc_flow &= ~rte_cpu_to_be_32(IPV6_TOS_MASK);
+
+ return (v | vtc_flow);
+}
+
/* update original ip header fields for transport case */
static inline int
update_trs_l3hdr(const struct rte_ipsec_sa *sa, void *p, uint32_t plen,
@@ -101,23 +124,136 @@ update_trs_l3hdr(const struct rte_ipsec_sa *sa, void *p, uint32_t plen,
return rc;
}
+/**
+ * Update type-of-service/traffic-class field of inbound/outbound tunnel
+ * packet.
+ *
+ * @param ref_h: reference header, for outbound it is inner header, otherwise
+ * outer header.
+ * @param update_h: header to be updated tos/tc field, for outbound it is outer
+ * header, otherwise inner header.
+ * @param tos_mask: type-of-service mask stored in sa.
+ * @param is_outh_ipv4: 1 if outer header is ipv4, 0 if it is ipv6.
+ * @param is_inner_ipv4: 1 if inner header is ipv4, 0 if it is ipv6.
+ * @param is_inbound: 1 if it is a inbound packet, 0 if it is outbound.
+ */
+static inline void
+update_tun_tos(const void *ref_h, void *update_h, uint32_t tos_mask,
+ uint8_t is_outh_ipv4, uint8_t is_inh_ipv4, uint8_t is_inbound)
+{
+ uint8_t idx = ((is_inbound << 2) | (is_outh_ipv4 << 1) | is_inh_ipv4);
+ struct rte_ipv4_hdr *v4out_h;
+ struct rte_ipv6_hdr *v6out_h;
+ struct rte_ipv4_hdr *v4in_h;
+ struct rte_ipv6_hdr *v6in_h;
+ uint32_t itp, otp;
+ uint8_t ecn_v4out, ecn_v4in;
+ uint32_t ecn_v6out, ecn_v6in;
+
+ switch (idx) {
+ /* outbound */
+ case 0: /*outh ipv6, inh ipv6 */
+ v6out_h = update_h;
+ otp = get_ipv6_tos(v6out_h->vtc_flow) & ~tos_mask;
+ itp = get_ipv6_tos(((const struct rte_ipv6_hdr *)ref_h)->
+ vtc_flow) & tos_mask;
+ v6out_h->vtc_flow = set_ipv6_tos(v6out_h->vtc_flow, otp | itp);
+ break;
+ case 1: /*outh ipv6, inh ipv4 */
+ v6out_h = update_h;
+ otp = get_ipv6_tos(v6out_h->vtc_flow) & ~tos_mask;
+ itp = ((const struct rte_ipv4_hdr *)ref_h)->type_of_service &
+ tos_mask;
+ v6out_h->vtc_flow = set_ipv6_tos(v6out_h->vtc_flow, otp | itp);
+ break;
+ case 2: /*outh ipv4, inh ipv6 */
+ v4out_h = update_h;
+ otp = v4out_h->type_of_service & ~tos_mask;
+ itp = get_ipv6_tos(((const struct rte_ipv6_hdr *)ref_h)->
+ vtc_flow) & tos_mask;
+ v4out_h->type_of_service = (otp | itp);
+ break;
+ case 3: /* outh ipv4, inh ipv4 */
+ v4out_h = update_h;
+ otp = v4out_h->type_of_service & ~tos_mask;
+ itp = ((const struct rte_ipv4_hdr *)ref_h)->type_of_service &
+ tos_mask;
+ v4out_h->type_of_service = (otp | itp);
+ break;
+ /* inbound */
+ case 4: /* outh ipv6, inh ipv6 */
+ v6in_h = update_h;
+ ecn_v6out = ((const struct rte_ipv6_hdr *)ref_h)->vtc_flow &
+ rte_cpu_to_be_32(IPV6_ECN_MASK);
+ ecn_v6in = v6in_h->vtc_flow & rte_cpu_to_be_32(IPV6_ECN_MASK);
+ if ((ecn_v6out == rte_cpu_to_be_32(IPV6_ECN_CE)) &&
+ (ecn_v6in != 0))
+ v6in_h->vtc_flow |= rte_cpu_to_be_32(IPV6_ECN_CE);
+ break;
+ case 5: /* outh ipv6, inh ipv4 */
+ v4in_h = update_h;
+ ecn_v6out = ((const struct rte_ipv6_hdr *)ref_h)->vtc_flow &
+ rte_cpu_to_be_32(IPV6_ECN_MASK);
+ ecn_v4in = v4in_h->type_of_service & RTE_IP_ECN_MASK;
+ if ((ecn_v6out == rte_cpu_to_be_32(IPV6_ECN_CE)) &&
+ (ecn_v4in != 0))
+ v4in_h->type_of_service |= RTE_IP_ECN_CE;
+ break;
+ case 6: /* outh ipv4, inh ipv6 */
+ v6in_h = update_h;
+ ecn_v4out = ((const struct rte_ipv4_hdr *)ref_h)->
+ type_of_service & RTE_IP_ECN_MASK;
+ ecn_v6in = v6in_h->vtc_flow & rte_cpu_to_be_32(IPV6_ECN_MASK);
+ if (ecn_v4out == RTE_IP_ECN_CE && ecn_v6in != 0)
+ v6in_h->vtc_flow |= rte_cpu_to_be_32(IPV6_ECN_CE);
+ break;
+ case 7: /* outh ipv4, inh ipv4 */
+ v4in_h = update_h;
+ ecn_v4out = ((const struct rte_ipv4_hdr *)ref_h)->
+ type_of_service & RTE_IP_ECN_MASK;
+ ecn_v4in = v4in_h->type_of_service & RTE_IP_ECN_MASK;
+ if (ecn_v4out == RTE_IP_ECN_CE && ecn_v4in != 0)
+ v4in_h->type_of_service |= RTE_IP_ECN_CE;
+ break;
+ }
+}
+
+
/* update original and new ip header fields for tunnel case */
static inline void
-update_tun_l3hdr(const struct rte_ipsec_sa *sa, void *p, uint32_t plen,
- uint32_t l2len, rte_be16_t pid)
+update_outb_tun_l3hdr(const struct rte_ipsec_sa *sa, void *outh,
+ const void *inh, uint32_t plen, uint32_t l2len, rte_be16_t pid)
{
struct rte_ipv4_hdr *v4h;
struct rte_ipv6_hdr *v6h;
+ uint8_t is_out_ipv4;
if (sa->type & RTE_IPSEC_SATP_MODE_TUNLV4) {
- v4h = p;
+ is_out_ipv4 = 1;
+ v4h = outh;
v4h->packet_id = pid;
v4h->total_length = rte_cpu_to_be_16(plen - l2len);
} else {
- v6h = p;
+ is_out_ipv4 = 0;
+ v6h = outh;
v6h->payload_len = rte_cpu_to_be_16(plen - l2len -
sizeof(*v6h));
}
+
+ if (sa->type & TUN_HDR_MSK)
+ update_tun_tos(inh, outh, sa->tos_mask, is_out_ipv4,
+ ((sa->type & RTE_IPSEC_SATP_IPV_MASK) ==
+ RTE_IPSEC_SATP_IPV4), 0);
+}
+
+static inline void
+update_inb_tun_l3_hdr(const struct rte_ipsec_sa *sa, void *ip_inner,
+ const void *ip_outter)
+{
+ update_tun_tos(ip_outter, ip_inner, sa->tos_mask,
+ ((sa->type & RTE_IPSEC_SATP_MODE_TUNLV4) != 0),
+ ((sa->type & RTE_IPSEC_SATP_IPV_MASK) == RTE_IPSEC_SATP_IPV4),
+ 1);
}
#endif /* _IPH_H_ */
diff --git a/lib/librte_ipsec/rte_ipsec_sa.h b/lib/librte_ipsec/rte_ipsec_sa.h
index fd9b3ed60..8f179ee9d 100644
--- a/lib/librte_ipsec/rte_ipsec_sa.h
+++ b/lib/librte_ipsec/rte_ipsec_sa.h
@@ -95,6 +95,11 @@ enum {
RTE_SATP_LOG2_MODE,
RTE_SATP_LOG2_SQN = RTE_SATP_LOG2_MODE + 2,
RTE_SATP_LOG2_ESN,
+ RTE_SATP_LOG2_ECN,
+ RTE_SATP_LOG2_DSCP,
+ RTE_SATP_LOG2_TTL,
+ RTE_SATP_LOG2_DF,
+ RTE_SATP_LOG2_FLABEL,
RTE_SATP_LOG2_NUM
};
@@ -123,6 +128,26 @@ enum {
#define RTE_IPSEC_SATP_ESN_DISABLE (0ULL << RTE_SATP_LOG2_ESN)
#define RTE_IPSEC_SATP_ESN_ENABLE (1ULL << RTE_SATP_LOG2_ESN)
+#define RTE_IPSEC_SATP_ECN_MASK (1ULL << RTE_SATP_LOG2_ECN)
+#define RTE_IPSEC_SATP_ECN_DISABLE (0ULL << RTE_SATP_LOG2_ECN)
+#define RTE_IPSEC_SATP_ECN_ENABLE (1ULL << RTE_SATP_LOG2_ECN)
+
+#define RTE_IPSEC_SATP_DSCP_MASK (1ULL << RTE_SATP_LOG2_DSCP)
+#define RTE_IPSEC_SATP_DSCP_DISABLE (0ULL << RTE_SATP_LOG2_DSCP)
+#define RTE_IPSEC_SATP_DSCP_ENABLE (1ULL << RTE_SATP_LOG2_DSCP)
+
+#define RTE_IPSEC_SATP_TTL_MASK (1ULL << RTE_SATP_LOG2_TTL)
+#define RTE_IPSEC_SATP_TTL_DISABLE (0ULL << RTE_SATP_LOG2_TTL)
+#define RTE_IPSEC_SATP_TTL_ENABLE (1ULL << RTE_SATP_LOG2_TTL)
+
+#define RTE_IPSEC_SATP_DF_MASK (1ULL << RTE_SATP_LOG2_DF)
+#define RTE_IPSEC_SATP_DF_DISABLE (0ULL << RTE_SATP_LOG2_DF)
+#define RTE_IPSEC_SATP_DF_ENABLE (1ULL << RTE_SATP_LOG2_DF)
+
+#define RTE_IPSEC_SATP_FLABEL_MASK (1ULL << RTE_SATP_LOG2_FLABEL)
+#define RTE_IPSEC_SATP_FLABEL_DISABLE (0ULL << RTE_SATP_LOG2_FLABEL)
+#define RTE_IPSEC_SATP_FLABEL_ENABLE (1ULL << RTE_SATP_LOG2_FLABEL)
+
/**
* get type of given SA
* @return
diff --git a/lib/librte_ipsec/sa.c b/lib/librte_ipsec/sa.c
index 087de958a..61d817dfc 100644
--- a/lib/librte_ipsec/sa.c
+++ b/lib/librte_ipsec/sa.c
@@ -220,6 +220,17 @@ fill_sa_type(const struct rte_ipsec_sa_prm *prm, uint64_t *type)
else
tp |= RTE_IPSEC_SATP_SQN_RAW;
+ /* check for ECN flag */
+ if (prm->ipsec_xform.options.ecn == 0)
+ tp |= RTE_IPSEC_SATP_ECN_DISABLE;
+ else
+ tp |= RTE_IPSEC_SATP_ECN_ENABLE;
+ /* check for DSCP flag */
+ if (prm->ipsec_xform.options.copy_dscp == 0)
+ tp |= RTE_IPSEC_SATP_DSCP_DISABLE;
+ else
+ tp |= RTE_IPSEC_SATP_DSCP_ENABLE;
+
*type = tp;
return 0;
}
@@ -310,6 +321,12 @@ esp_sa_init(struct rte_ipsec_sa *sa, const struct rte_ipsec_sa_prm *prm,
static const uint64_t msk = RTE_IPSEC_SATP_DIR_MASK |
RTE_IPSEC_SATP_MODE_MASK;
+ if (prm->ipsec_xform.options.ecn)
+ sa->tos_mask |= RTE_IP_ECN_MASK;
+
+ if (prm->ipsec_xform.options.copy_dscp)
+ sa->tos_mask |= RTE_IP_DSCP_MASK;
+
if (cxf->aead != NULL) {
switch (cxf->aead->algo) {
case RTE_CRYPTO_AEAD_AES_GCM:
diff --git a/lib/librte_ipsec/sa.h b/lib/librte_ipsec/sa.h
index 20c0a65c0..51e69ad05 100644
--- a/lib/librte_ipsec/sa.h
+++ b/lib/librte_ipsec/sa.h
@@ -10,6 +10,7 @@
#define IPSEC_MAX_HDR_SIZE 64
#define IPSEC_MAX_IV_SIZE 16
#define IPSEC_MAX_IV_QWORD (IPSEC_MAX_IV_SIZE / sizeof(uint64_t))
+#define TUN_HDR_MSK (RTE_IPSEC_SATP_ECN_MASK | RTE_IPSEC_SATP_DSCP_MASK)
/* padding alignment for different algorithms */
enum {
@@ -103,6 +104,7 @@ struct rte_ipsec_sa {
uint8_t iv_ofs; /* offset for algo-specific IV inside crypto op */
uint8_t iv_len;
uint8_t pad_align;
+ uint8_t tos_mask;
/* template for tunnel header */
uint8_t hdr[IPSEC_MAX_HDR_SIZE];
diff --git a/lib/librte_net/rte_ip.h b/lib/librte_net/rte_ip.h
index c2c67b85d..85c53e8d9 100644
--- a/lib/librte_net/rte_ip.h
+++ b/lib/librte_net/rte_ip.h
@@ -46,6 +46,17 @@ struct rte_ipv4_hdr {
(((b) & 0xff) << 16) | \
(((c) & 0xff) << 8) | \
((d) & 0xff))
+/**
+ * RFC 3168 Explicit Congestion Notification (ECN)
+ * * ECT(1) (ECN-Capable Transport(1))
+ * * ECT(0) (ECN-Capable Transport(0))
+ * * ECT(CE)(CE (Congestion Experienced))
+ */
+#define RTE_IP_ECN_MASK (0x03)
+#define RTE_IP_ECN_CE RTE_IP_ECN_MASK
+
+/** Packet Option Masks */
+#define RTE_IP_DSCP_MASK (0xFC)
/** Maximal IPv4 packet length (including a header) */
#define RTE_IPV4_MAX_PKT_LEN 65535
diff --git a/lib/librte_security/rte_security.h b/lib/librte_security/rte_security.h
index 76f54e0e0..d0492928c 100644
--- a/lib/librte_security/rte_security.h
+++ b/lib/librte_security/rte_security.h
@@ -163,6 +163,15 @@ struct rte_security_ipsec_sa_options {
* * 0: Inner packet is not modified.
*/
uint32_t dec_ttl : 1;
+
+ /**< Explicit Congestion Notification (ECN)
+ *
+ * * 1: In tunnel mode, enable outer header ECN Field copied from
+ * inner header in tunnel encapsulation, or inner header ECN
+ * field construction in decapsulation.
+ * * 0: Inner/outer header are not modified.
+ */
+ uint32_t ecn : 1;
};
/** IPSec security association direction */
--
2.14.5
next prev parent reply other threads:[~2019-06-26 15:11 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-17 16:03 [dpdk-dev] [PATCH v1] " Marko Kovacevic
2019-05-19 16:26 ` Ananyev, Konstantin
2019-06-20 12:27 ` Akhil Goyal
2019-06-25 13:43 ` [dpdk-dev] [PATCH v2 0/2] ipsec: ECN and DSCP header reconstruction Fan Zhang
2019-06-25 13:43 ` [dpdk-dev] [PATCH v2 1/2] lib/ipsec: add support for header construction Fan Zhang
2019-06-25 13:43 ` [dpdk-dev] [PATCH v2 2/2] examples/ipsec-secgw: support header reconstruction Fan Zhang
2019-06-26 15:05 ` [dpdk-dev] [PATCH v3 0/2] ipsec: ECN and DSCP " Fan Zhang
2019-06-26 15:05 ` Fan Zhang [this message]
2019-06-26 22:15 ` [dpdk-dev] [PATCH v3 1/2] lib/ipsec: add support for header construction Ananyev, Konstantin
2019-06-26 15:05 ` [dpdk-dev] [PATCH v3 2/2] examples/ipsec-secgw: support header reconstruction Fan Zhang
2019-06-28 12:39 ` [dpdk-dev] [PATCH v4 0/2] ipsec: ECN and DSCP " Fan Zhang
2019-06-28 12:39 ` [dpdk-dev] [PATCH v4 1/2] lib/ipsec: add support for header construction Fan Zhang
2019-06-28 12:39 ` [dpdk-dev] [PATCH v4 2/2] examples/ipsec-secgw: support header reconstruction Fan Zhang
2019-06-28 13:22 ` [dpdk-dev] [PATCH v5 0/2] ipsec: ECN and DSCP " Fan Zhang
2019-06-28 13:22 ` [dpdk-dev] [PATCH v5 1/2] lib/ipsec: add support for header construction Fan Zhang
2019-07-01 10:40 ` Ananyev, Konstantin
2019-06-28 13:22 ` [dpdk-dev] [PATCH v5 2/2] examples/ipsec-secgw: support header reconstruction Fan Zhang
2019-07-01 10:41 ` Ananyev, Konstantin
2019-07-01 12:01 ` [dpdk-dev] [PATCH v6 0/2] ipsec: ECN and DSCP " Fan Zhang
2019-07-01 12:01 ` [dpdk-dev] [PATCH v6 1/2] lib/ipsec: add support for header construction Fan Zhang
2019-07-01 13:11 ` Olivier Matz
2019-07-01 12:01 ` [dpdk-dev] [PATCH v6 2/2] examples/ipsec-secgw: support header reconstruction Fan Zhang
2019-07-03 10:11 ` [dpdk-dev] [PATCH v6 0/2] ipsec: ECN and DSCP " Akhil Goyal
2019-07-04 10:42 ` [dpdk-dev] [PATCH v7 " Fan Zhang
2019-07-04 10:42 ` [dpdk-dev] [PATCH v7 1/2] lib/ipsec: add support for header construction Fan Zhang
2019-07-04 10:42 ` [dpdk-dev] [PATCH v7 2/2] examples/ipsec-secgw: support header reconstruction Fan Zhang
2019-07-05 10:12 ` [dpdk-dev] [PATCH v7 0/2] ipsec: ECN and DSCP " Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190626150509.17442-2-roy.fan.zhang@intel.com \
--to=roy.fan.zhang@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).