[dpdk-dev] [PATCH v2 04/57] net/octeontx2: add devargs parsing functions

[<jerinj@marvell.com>]

From: Jerin Jacob <jerinj@marvell.com>

add various devargs command line options supported by
this driver.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
---
 doc/guides/nics/octeontx2.rst               |  67 ++++++++
 drivers/net/octeontx2/Makefile              |   5 +-
 drivers/net/octeontx2/meson.build           |   1 +
 drivers/net/octeontx2/otx2_ethdev.c         |   7 +
 drivers/net/octeontx2/otx2_ethdev.h         |  23 +++
 drivers/net/octeontx2/otx2_ethdev_devargs.c | 165 ++++++++++++++++++++
 drivers/net/octeontx2/otx2_rx.h             |  10 ++
 7 files changed, 276 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/octeontx2/otx2_ethdev_devargs.c
 create mode 100644 drivers/net/octeontx2/otx2_rx.h

diff --git a/doc/guides/nics/octeontx2.rst b/doc/guides/nics/octeontx2.rst
index f0bd36be3..92a7ebc42 100644
--- a/doc/guides/nics/octeontx2.rst
+++ b/doc/guides/nics/octeontx2.rst
@@ -30,3 +30,70 @@ The following options may be modified in the ``config`` file.
 - ``CONFIG_RTE_LIBRTE_OCTEONTX2_PMD`` (default ``y``)
 
   Toggle compilation of the ``librte_pmd_octeontx2`` driver.
+
+Runtime Config Options
+----------------------
+
+- ``HW offload ptype parsing disable`` (default ``0``)
+
+   Packet type parsing is HW offloaded by default and this feature may be toggled
+   using ``ptype_disable`` ``devargs`` parameter.
+
+- ``Rx&Tx scalar mode enable`` (default ``0``)
+
+   Ethdev supports both scalar and vector mode, it may be selected at runtime
+   using ``scalar_enable`` ``devargs`` parameter.
+
+- ``RSS reta size`` (default ``64``)
+
+   RSS redirection table size may be configured during runtime using ``reta_size``
+   ``devargs`` parameter.
+
+   For example::
+
+      -w 0002:02:00.0,reta_size=256
+
+   With the above configuration, reta table of size 256 is populated.
+
+- ``Flow priority levels`` (default ``3``)
+
+   RTE Flow priority levels can be configured during runtime using
+   ``flow_max_priority`` ``devargs`` parameter.
+
+   For example::
+
+      -w 0002:02:00.0,flow_max_priority=10
+
+   With the above configuration, priority level was set to 10 (0-9). Max
+   priority level supported is 32.
+
+- ``Reserve Flow entries`` (default ``8``)
+
+   RTE flow entries can be pre allocated and the size of pre allocation can be
+   selected runtime using ``flow_prealloc_size`` ``devargs`` parameter.
+
+   For example::
+
+      -w 0002:02:00.0,flow_prealloc_size=4
+
+   With the above configuration, pre alloc size was set to 4. Max pre alloc
+   size supported is 32.
+
+- ``Max SQB buffer count`` (default ``512``)
+
+   Send queue descriptor buffer count may be limited during runtime using
+   ``max_sqb_count`` ``devargs`` parameter.
+
+   For example::
+
+      -w 0002:02:00.0,max_sqb_count=64
+
+   With the above configuration, each send queue's decscriptor buffer count is
+   limited to a maximum of 64 buffers.
+
+
+.. note::
+
+   Above devarg parameters are configurable per device, user needs to pass the
+   parameters to all the PCIe devices if application requires to configure on
+   all the ethdev ports.
diff --git a/drivers/net/octeontx2/Makefile b/drivers/net/octeontx2/Makefile
index 4ff3609d2..d1c8871d8 100644
--- a/drivers/net/octeontx2/Makefile
+++ b/drivers/net/octeontx2/Makefile
@@ -29,9 +29,10 @@ LIBABIVER := 1
 #
 SRCS-$(CONFIG_RTE_LIBRTE_OCTEONTX2_PMD) += \
 	otx2_mac.c	\
-	otx2_ethdev.c
+	otx2_ethdev.c	\
+	otx2_ethdev_devargs.c
 
 LDLIBS += -lrte_common_octeontx2 -lrte_mempool_octeontx2 -lrte_eal
-LDLIBS += -lrte_ethdev -lrte_bus_pci
+LDLIBS += -lrte_ethdev -lrte_bus_pci -lrte_kvargs
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/octeontx2/meson.build b/drivers/net/octeontx2/meson.build
index b153f166d..b5c6fb978 100644
--- a/drivers/net/octeontx2/meson.build
+++ b/drivers/net/octeontx2/meson.build
@@ -5,6 +5,7 @@
 sources = files(
 		'otx2_mac.c',
 		'otx2_ethdev.c',
+		'otx2_ethdev_devargs.c'
 		)
 
 deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2']
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index 08f03b4c3..eeba0c2c6 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -137,6 +137,13 @@ otx2_eth_dev_init(struct rte_eth_dev *eth_dev)
 	memset(&dev->otx2_eth_dev_data_start, 0, sizeof(*dev) -
 		offsetof(struct otx2_eth_dev, otx2_eth_dev_data_start));
 
+	/* Parse devargs string */
+	rc = otx2_ethdev_parse_devargs(eth_dev->device->devargs, dev);
+	if (rc) {
+		otx2_err("Failed to parse devargs rc=%d", rc);
+		goto error;
+	}
+
 	if (!dev->mbox_active) {
 		/* Initialize the base otx2_dev object
 		 * only if already present
diff --git a/drivers/net/octeontx2/otx2_ethdev.h b/drivers/net/octeontx2/otx2_ethdev.h
index d9f72686a..a83688392 100644
--- a/drivers/net/octeontx2/otx2_ethdev.h
+++ b/drivers/net/octeontx2/otx2_ethdev.h
@@ -9,11 +9,13 @@
 
 #include <rte_common.h>
 #include <rte_ethdev.h>
+#include <rte_kvargs.h>
 
 #include "otx2_common.h"
 #include "otx2_dev.h"
 #include "otx2_irq.h"
 #include "otx2_mempool.h"
+#include "otx2_rx.h"
 
 #define OTX2_ETH_DEV_PMD_VERSION	"1.0"
 
@@ -31,6 +33,10 @@
 /* Used for struct otx2_eth_dev::flags */
 #define OTX2_LINK_CFG_IN_PROGRESS_F	BIT_ULL(0)
 
+#define NIX_MAX_SQB			512
+#define NIX_MIN_SQB			32
+#define NIX_RSS_RETA_SIZE		64
+
 #define NIX_TX_OFFLOAD_CAPA ( \
 	DEV_TX_OFFLOAD_MBUF_FAST_FREE	| \
 	DEV_TX_OFFLOAD_MT_LOCKFREE	| \
@@ -56,6 +62,15 @@
 	DEV_RX_OFFLOAD_QINQ_STRIP | \
 	DEV_RX_OFFLOAD_TIMESTAMP)
 
+struct otx2_rss_info {
+	uint16_t rss_size;
+};
+
+struct otx2_npc_flow_info {
+	uint16_t flow_prealloc_size;
+	uint16_t flow_max_priority;
+};
+
 struct otx2_eth_dev {
 	OTX2_DEV; /* Base class */
 	MARKER otx2_eth_dev_data_start;
@@ -72,12 +87,16 @@ struct otx2_eth_dev {
 	uint16_t nix_msixoff;
 	uintptr_t base;
 	uintptr_t lmt_addr;
+	uint16_t scalar_ena;
+	uint16_t max_sqb_count;
 	uint16_t rx_offload_flags; /* Selected Rx offload flags(NIX_RX_*_F) */
 	uint64_t rx_offloads;
 	uint16_t tx_offload_flags; /* Selected Tx offload flags(NIX_TX_*_F) */
 	uint64_t tx_offloads;
 	uint64_t rx_offload_capa;
 	uint64_t tx_offload_capa;
+	struct otx2_rss_info rss_info;
+	struct otx2_npc_flow_info npc_flow;
 } __rte_cache_aligned;
 
 static inline struct otx2_eth_dev *
@@ -96,4 +115,8 @@ int otx2_cgx_mac_addr_set(struct rte_eth_dev *eth_dev,
 int otx2_nix_mac_addr_get(struct rte_eth_dev *eth_dev, uint8_t *addr);
 int otx2_cgx_mac_max_entries_get(struct otx2_eth_dev *dev);
 
+/* Devargs */
+int otx2_ethdev_parse_devargs(struct rte_devargs *devargs,
+			      struct otx2_eth_dev *dev);
+
 #endif /* __OTX2_ETHDEV_H__ */
diff --git a/drivers/net/octeontx2/otx2_ethdev_devargs.c b/drivers/net/octeontx2/otx2_ethdev_devargs.c
new file mode 100644
index 000000000..85e7e312a
--- /dev/null
+++ b/drivers/net/octeontx2/otx2_ethdev_devargs.c
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <inttypes.h>
+#include <math.h>
+
+#include "otx2_ethdev.h"
+
+static int
+parse_flow_max_priority(const char *key, const char *value, void *extra_args)
+{
+	RTE_SET_USED(key);
+	uint16_t val;
+
+	val = atoi(value);
+
+	/* Limit the max priority to 32 */
+	if (val < 1 || val > 32)
+		return -EINVAL;
+
+	*(uint16_t *)extra_args = val;
+
+	return 0;
+}
+
+static int
+parse_flow_prealloc_size(const char *key, const char *value, void *extra_args)
+{
+	RTE_SET_USED(key);
+	uint16_t val;
+
+	val = atoi(value);
+
+	/* Limit the prealloc size to 32 */
+	if (val < 1 || val > 32)
+		return -EINVAL;
+
+	*(uint16_t *)extra_args = val;
+
+	return 0;
+}
+
+static int
+parse_reta_size(const char *key, const char *value, void *extra_args)
+{
+	RTE_SET_USED(key);
+	uint32_t val;
+
+	val = atoi(value);
+
+	if (val <= ETH_RSS_RETA_SIZE_64)
+		val = ETH_RSS_RETA_SIZE_64;
+	else if (val > ETH_RSS_RETA_SIZE_64 && val <= ETH_RSS_RETA_SIZE_128)
+		val = ETH_RSS_RETA_SIZE_128;
+	else if (val > ETH_RSS_RETA_SIZE_128 && val <= ETH_RSS_RETA_SIZE_256)
+		val = ETH_RSS_RETA_SIZE_256;
+	else
+		val = NIX_RSS_RETA_SIZE;
+
+	*(uint16_t *)extra_args = val;
+
+	return 0;
+}
+
+static int
+parse_ptype_flag(const char *key, const char *value, void *extra_args)
+{
+	RTE_SET_USED(key);
+	uint32_t val;
+
+	val = atoi(value);
+	if (val)
+		val = 0; /* Disable NIX_RX_OFFLOAD_PTYPE_F */
+
+	*(uint16_t *)extra_args = val;
+
+	return 0;
+}
+
+static int
+parse_flag(const char *key, const char *value, void *extra_args)
+{
+	RTE_SET_USED(key);
+
+	*(uint16_t *)extra_args = atoi(value);
+
+	return 0;
+}
+
+static int
+parse_sqb_count(const char *key, const char *value, void *extra_args)
+{
+	RTE_SET_USED(key);
+	uint32_t val;
+
+	val = atoi(value);
+
+	if (val < NIX_MIN_SQB || val > NIX_MAX_SQB)
+		return -EINVAL;
+
+	*(uint16_t *)extra_args = val;
+
+	return 0;
+}
+
+#define OTX2_RSS_RETA_SIZE "reta_size"
+#define OTX2_PTYPE_DISABLE "ptype_disable"
+#define OTX2_SCL_ENABLE "scalar_enable"
+#define OTX2_MAX_SQB_COUNT "max_sqb_count"
+#define OTX2_FLOW_PREALLOC_SIZE "flow_prealloc_size"
+#define OTX2_FLOW_MAX_PRIORITY "flow_max_priority"
+
+int
+otx2_ethdev_parse_devargs(struct rte_devargs *devargs, struct otx2_eth_dev *dev)
+{
+	uint16_t offload_flag = NIX_RX_OFFLOAD_PTYPE_F;
+	uint16_t rss_size = NIX_RSS_RETA_SIZE;
+	uint16_t sqb_count = NIX_MAX_SQB;
+	uint16_t flow_prealloc_size = 8;
+	uint16_t flow_max_priority = 3;
+	uint16_t scalar_enable = 0;
+	struct rte_kvargs *kvlist;
+
+	if (devargs == NULL)
+		goto null_devargs;
+
+	kvlist = rte_kvargs_parse(devargs->args, NULL);
+	if (kvlist == NULL)
+		goto exit;
+
+	rte_kvargs_process(kvlist, OTX2_PTYPE_DISABLE,
+			   &parse_ptype_flag, &offload_flag);
+	rte_kvargs_process(kvlist, OTX2_RSS_RETA_SIZE,
+			   &parse_reta_size, &rss_size);
+	rte_kvargs_process(kvlist, OTX2_SCL_ENABLE,
+			   &parse_flag, &scalar_enable);
+	rte_kvargs_process(kvlist, OTX2_MAX_SQB_COUNT,
+			   &parse_sqb_count, &sqb_count);
+	rte_kvargs_process(kvlist, OTX2_FLOW_PREALLOC_SIZE,
+			   &parse_flow_prealloc_size, &flow_prealloc_size);
+	rte_kvargs_process(kvlist, OTX2_FLOW_MAX_PRIORITY,
+			   &parse_flow_max_priority, &flow_max_priority);
+	rte_kvargs_free(kvlist);
+
+null_devargs:
+	dev->rx_offload_flags = offload_flag;
+	dev->scalar_ena = scalar_enable;
+	dev->max_sqb_count = sqb_count;
+	dev->rss_info.rss_size = rss_size;
+	dev->npc_flow.flow_prealloc_size = flow_prealloc_size;
+	dev->npc_flow.flow_max_priority = flow_max_priority;
+	return 0;
+
+exit:
+	return -EINVAL;
+}
+
+RTE_PMD_REGISTER_PARAM_STRING(net_octeontx2,
+			      OTX2_RSS_RETA_SIZE "=<64|128|256>"
+			      OTX2_PTYPE_DISABLE "=1"
+			      OTX2_SCL_ENABLE "=1"
+			      OTX2_MAX_SQB_COUNT "=<32-512>"
+			      OTX2_FLOW_PREALLOC_SIZE "=<1-32>"
+			      OTX2_FLOW_MAX_PRIORITY "=<1-32>");
diff --git a/drivers/net/octeontx2/otx2_rx.h b/drivers/net/octeontx2/otx2_rx.h
new file mode 100644
index 000000000..1749c43ff
--- /dev/null
+++ b/drivers/net/octeontx2/otx2_rx.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef __OTX2_RX_H__
+#define __OTX2_RX_H__
+
+#define NIX_RX_OFFLOAD_PTYPE_F         BIT(1)
+
+#endif /* __OTX2_RX_H__ */
-- 
2.21.0