[dpdk-dev] [PATCH v3 54/58] net/octeontx2: add device start operation

[<jerinj@marvell.com>]

From: Nithin Dabilpuram <ndabilpuram@marvell.com>

Add device start operation and update the correct
function pointers for Rx and Tx burst functions.

This patch also update the octeontx2 NIC specific
documentation.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
---
 doc/guides/nics/octeontx2.rst           |  91 ++++++++++++
 drivers/net/octeontx2/otx2_ethdev.c     | 180 ++++++++++++++++++++++++
 drivers/net/octeontx2/otx2_flow.c       |   4 +-
 drivers/net/octeontx2/otx2_flow_parse.c |   4 +-
 drivers/net/octeontx2/otx2_ptp.c        |   8 ++
 drivers/net/octeontx2/otx2_vlan.c       |   1 +
 6 files changed, 286 insertions(+), 2 deletions(-)

diff --git a/doc/guides/nics/octeontx2.rst b/doc/guides/nics/octeontx2.rst
index e92631057..31cc1beec 100644
--- a/doc/guides/nics/octeontx2.rst
+++ b/doc/guides/nics/octeontx2.rst
@@ -34,6 +34,7 @@ Features of the OCTEON TX2 Ethdev PMD are:
 - Vector Poll mode driver
 - Debug utilities - Context dump and error interrupt support
 - IEEE1588 timestamping
+- HW offloaded `ethdev Rx queue` to `eventdev event queue` packet injection
 
 Prerequisites
 -------------
@@ -49,6 +50,63 @@ The following options may be modified in the ``config`` file.
 
   Toggle compilation of the ``librte_pmd_octeontx2`` driver.
 
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+To compile the OCTEON TX2 PMD for Linux arm64 gcc,
+use arm64-octeontx2-linux-gcc as target.
+
+#. Running testpmd:
+
+   Follow instructions available in the document
+   :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+   to run testpmd.
+
+   Example output:
+
+   .. code-block:: console
+
+      ./build/app/testpmd -c 0x300 -w 0002:02:00.0 -- --portmask=0x1 --nb-cores=1 --port-topology=loop --rxq=1 --txq=1
+      EAL: Detected 24 lcore(s)
+      EAL: Detected 1 NUMA nodes
+      EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
+      EAL: No available hugepages reported in hugepages-2048kB
+      EAL: Probing VFIO support...
+      EAL: VFIO support initialized
+      EAL: PCI device 0002:02:00.0 on NUMA socket 0
+      EAL:   probe driver: 177d:a063 net_octeontx2
+      EAL:   using IOMMU type 1 (Type 1)
+      testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=267456, size=2176, socket=0
+      testpmd: preferred mempool ops selected: octeontx2_npa
+      Configuring Port 0 (socket 0)
+      PMD: Port 0: Link Up - speed 40000 Mbps - full-duplex
+
+      Port 0: link state change event
+      Port 0: 36:10:66:88:7A:57
+      Checking link statuses...
+      Done
+      No commandline core given, start packet forwarding
+      io packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native
+      Logical Core 9 (socket 0) forwards packets on 1 streams:
+        RX P=0/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
+
+        io packet forwarding packets/burst=32
+        nb forwarding cores=1 - nb forwarding ports=1
+        port 0: RX queue number: 1 Tx queue number: 1
+          Rx offloads=0x0 Tx offloads=0x10000
+          RX queue: 0
+            RX desc=512 - RX free threshold=0
+            RX threshold registers: pthresh=0 hthresh=0  wthresh=0
+            RX Offloads=0x0
+          TX queue: 0
+            TX desc=512 - TX free threshold=0
+            TX threshold registers: pthresh=0 hthresh=0  wthresh=0
+            TX offloads=0x10000 - TX RS bit threshold=0
+      Press enter to exit
+
 Runtime Config Options
 ----------------------
 
@@ -116,6 +174,39 @@ Runtime Config Options
    parameters to all the PCIe devices if application requires to configure on
    all the ethdev ports.
 
+Limitations
+-----------
+
+``mempool_octeontx2`` external mempool handler dependency
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The OCTEON TX2 SoC family NIC has inbuilt HW assisted external mempool manager.
+``net_octeontx2`` pmd only works with ``mempool_octeontx2`` mempool handler
+as it is performance wise most effective way for packet allocation and Tx buffer
+recycling on OCTEON TX2 SoC platform.
+
+CRC striping
+~~~~~~~~~~~~
+
+The OCTEON TX2 SoC family NICs strip the CRC for every packet being received by
+the host interface irrespective of the offload configuration.
+
+
+Debugging Options
+-----------------
+
+.. _table_octeontx2_ethdev_debug_options:
+
+.. table:: OCTEON TX2 ethdev debug options
+
+   +---+------------+-------------------------------------------------------+
+   | # | Component  | EAL log command                                       |
+   +===+============+=======================================================+
+   | 1 | NIX        | --log-level='pmd\.net.octeontx2,8'                    |
+   +---+------------+-------------------------------------------------------+
+   | 2 | NPC        | --log-level='pmd\.net.octeontx2\.flow,8'              |
+   +---+------------+-------------------------------------------------------+
+
 RTE Flow Support
 ----------------
 
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index 1081d070a..113d382c6 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -135,6 +135,55 @@ otx2_cgx_rxtx_stop(struct otx2_eth_dev *dev)
 	return otx2_mbox_process(mbox);
 }
 
+static int
+npc_rx_enable(struct otx2_eth_dev *dev)
+{
+	struct otx2_mbox *mbox = dev->mbox;
+
+	otx2_mbox_alloc_msg_nix_lf_start_rx(mbox);
+
+	return otx2_mbox_process(mbox);
+}
+
+static int
+npc_rx_disable(struct otx2_eth_dev *dev)
+{
+	struct otx2_mbox *mbox = dev->mbox;
+
+	otx2_mbox_alloc_msg_nix_lf_stop_rx(mbox);
+
+	return otx2_mbox_process(mbox);
+}
+
+static int
+nix_cgx_start_link_event(struct otx2_eth_dev *dev)
+{
+	struct otx2_mbox *mbox = dev->mbox;
+
+	if (otx2_dev_is_vf(dev))
+		return 0;
+
+	otx2_mbox_alloc_msg_cgx_start_linkevents(mbox);
+
+	return otx2_mbox_process(mbox);
+}
+
+static int
+cgx_intlbk_enable(struct otx2_eth_dev *dev, bool en)
+{
+	struct otx2_mbox *mbox = dev->mbox;
+
+	if (otx2_dev_is_vf(dev))
+		return 0;
+
+	if (en)
+		otx2_mbox_alloc_msg_cgx_intlbk_enable(mbox);
+	else
+		otx2_mbox_alloc_msg_cgx_intlbk_disable(mbox);
+
+	return otx2_mbox_process(mbox);
+}
+
 static inline void
 nix_rx_queue_reset(struct otx2_eth_rxq *rxq)
 {
@@ -478,6 +527,74 @@ nix_sq_max_sqe_sz(struct otx2_eth_txq *txq)
 		return NIX_MAXSQESZ_W8;
 }
 
+static uint16_t
+nix_rx_offload_flags(struct rte_eth_dev *eth_dev)
+{
+	struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+	struct rte_eth_dev_data *data = eth_dev->data;
+	struct rte_eth_conf *conf = &data->dev_conf;
+	struct rte_eth_rxmode *rxmode = &conf->rxmode;
+	uint16_t flags = 0;
+
+	if (rxmode->mq_mode == ETH_MQ_RX_RSS)
+		flags |= NIX_RX_OFFLOAD_RSS_F;
+
+	if (dev->rx_offloads & (DEV_RX_OFFLOAD_TCP_CKSUM |
+			 DEV_RX_OFFLOAD_UDP_CKSUM))
+		flags |= NIX_RX_OFFLOAD_CHECKSUM_F;
+
+	if (dev->rx_offloads & (DEV_RX_OFFLOAD_IPV4_CKSUM |
+				DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM))
+		flags |= NIX_RX_OFFLOAD_CHECKSUM_F;
+
+	if (dev->rx_offloads & DEV_RX_OFFLOAD_SCATTER)
+		flags |= NIX_RX_MULTI_SEG_F;
+
+	if (dev->rx_offloads & (DEV_RX_OFFLOAD_VLAN_STRIP |
+				DEV_RX_OFFLOAD_QINQ_STRIP))
+		flags |= NIX_RX_OFFLOAD_VLAN_STRIP_F;
+
+	if ((dev->rx_offloads & DEV_RX_OFFLOAD_TIMESTAMP))
+		flags |= NIX_RX_OFFLOAD_TSTAMP_F;
+
+	return flags;
+}
+
+static uint16_t
+nix_tx_offload_flags(struct rte_eth_dev *eth_dev)
+{
+	struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+	uint64_t conf = dev->tx_offloads;
+	uint16_t flags = 0;
+
+	/* Fastpath is dependent on these enums */
+	RTE_BUILD_BUG_ON(PKT_TX_TCP_CKSUM != (1ULL << 52));
+	RTE_BUILD_BUG_ON(PKT_TX_SCTP_CKSUM != (2ULL << 52));
+	RTE_BUILD_BUG_ON(PKT_TX_UDP_CKSUM != (3ULL << 52));
+
+	if (conf & DEV_TX_OFFLOAD_VLAN_INSERT ||
+	    conf & DEV_TX_OFFLOAD_QINQ_INSERT)
+		flags |= NIX_TX_OFFLOAD_VLAN_QINQ_F;
+
+	if (conf & DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM ||
+	    conf & DEV_TX_OFFLOAD_OUTER_UDP_CKSUM)
+		flags |= NIX_TX_OFFLOAD_OL3_OL4_CSUM_F;
+
+	if (conf & DEV_TX_OFFLOAD_IPV4_CKSUM ||
+	    conf & DEV_TX_OFFLOAD_TCP_CKSUM ||
+	    conf & DEV_TX_OFFLOAD_UDP_CKSUM ||
+	    conf & DEV_TX_OFFLOAD_SCTP_CKSUM)
+		flags |= NIX_TX_OFFLOAD_L3_L4_CSUM_F;
+
+	if (!(conf & DEV_TX_OFFLOAD_MBUF_FAST_FREE))
+		flags |= NIX_TX_OFFLOAD_MBUF_NOFF_F;
+
+	if (conf & DEV_TX_OFFLOAD_MULTI_SEGS)
+		flags |= NIX_TX_MULTI_SEG_F;
+
+	return flags;
+}
+
 static int
 nix_sq_init(struct otx2_eth_txq *txq)
 {
@@ -1111,6 +1228,8 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
 
 	dev->rx_offloads = rxmode->offloads;
 	dev->tx_offloads = txmode->offloads;
+	dev->rx_offload_flags |= nix_rx_offload_flags(eth_dev);
+	dev->tx_offload_flags |= nix_tx_offload_flags(eth_dev);
 	dev->rss_info.rss_grps = NIX_RSS_GRPS;
 
 	nb_rxq = RTE_MAX(data->nb_rx_queues, 1);
@@ -1150,6 +1269,13 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
 		goto free_nix_lf;
 	}
 
+	/* Configure loop back mode */
+	rc = cgx_intlbk_enable(dev, eth_dev->data->dev_conf.lpbk_mode);
+	if (rc) {
+		otx2_err("Failed to configure cgx loop back mode rc=%d", rc);
+		goto free_nix_lf;
+	}
+
 	rc = otx2_nix_rxchan_bpid_cfg(eth_dev, true);
 	if (rc) {
 		otx2_err("Failed to configure nix rx chan bpid cfg rc=%d", rc);
@@ -1299,6 +1425,59 @@ otx2_nix_rx_queue_stop(struct rte_eth_dev *eth_dev, uint16_t qidx)
 	return rc;
 }
 
+static int
+otx2_nix_dev_start(struct rte_eth_dev *eth_dev)
+{
+	struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+	int rc, i;
+
+	/* Start rx queues */
+	for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
+		rc = otx2_nix_rx_queue_start(eth_dev, i);
+		if (rc)
+			return rc;
+	}
+
+	/* Start tx queues  */
+	for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
+		rc = otx2_nix_tx_queue_start(eth_dev, i);
+		if (rc)
+			return rc;
+	}
+
+	rc = otx2_nix_update_flow_ctrl_mode(eth_dev);
+	if (rc) {
+		otx2_err("Failed to update flow ctrl mode %d", rc);
+		return rc;
+	}
+
+	rc = npc_rx_enable(dev);
+	if (rc) {
+		otx2_err("Failed to enable NPC rx %d", rc);
+		return rc;
+	}
+
+	otx2_nix_toggle_flag_link_cfg(dev, true);
+
+	rc = nix_cgx_start_link_event(dev);
+	if (rc) {
+		otx2_err("Failed to start cgx link event %d", rc);
+		goto rx_disable;
+	}
+
+	otx2_nix_toggle_flag_link_cfg(dev, false);
+	otx2_eth_set_tx_function(eth_dev);
+	otx2_eth_set_rx_function(eth_dev);
+
+	return 0;
+
+rx_disable:
+	npc_rx_disable(dev);
+	otx2_nix_toggle_flag_link_cfg(dev, false);
+	return rc;
+}
+
+
 /* Initialize and register driver with DPDK Application */
 static const struct eth_dev_ops otx2_eth_dev_ops = {
 	.dev_infos_get            = otx2_nix_info_get,
@@ -1308,6 +1487,7 @@ static const struct eth_dev_ops otx2_eth_dev_ops = {
 	.tx_queue_release         = otx2_nix_tx_queue_release,
 	.rx_queue_setup           = otx2_nix_rx_queue_setup,
 	.rx_queue_release         = otx2_nix_rx_queue_release,
+	.dev_start                = otx2_nix_dev_start,
 	.tx_queue_start           = otx2_nix_tx_queue_start,
 	.tx_queue_stop            = otx2_nix_tx_queue_stop,
 	.rx_queue_start           = otx2_nix_rx_queue_start,
diff --git a/drivers/net/octeontx2/otx2_flow.c b/drivers/net/octeontx2/otx2_flow.c
index 3ddecfb23..982100df4 100644
--- a/drivers/net/octeontx2/otx2_flow.c
+++ b/drivers/net/octeontx2/otx2_flow.c
@@ -528,8 +528,10 @@ otx2_flow_destroy(struct rte_eth_dev *dev,
 			return -EINVAL;
 
 		/* Clear mark offload flag if there are no more mark actions */
-		if (rte_atomic32_sub_return(&npc->mark_actions, 1) == 0)
+		if (rte_atomic32_sub_return(&npc->mark_actions, 1) == 0) {
 			hw->rx_offload_flags &= ~NIX_RX_OFFLOAD_MARK_UPDATE_F;
+			otx2_eth_set_rx_function(dev);
+		}
 	}
 
 	rc = flow_free_rss_action(dev, flow);
diff --git a/drivers/net/octeontx2/otx2_flow_parse.c b/drivers/net/octeontx2/otx2_flow_parse.c
index 7f997ab74..1940cc636 100644
--- a/drivers/net/octeontx2/otx2_flow_parse.c
+++ b/drivers/net/octeontx2/otx2_flow_parse.c
@@ -938,9 +938,11 @@ otx2_flow_parse_actions(struct rte_eth_dev *dev,
 	if (mark)
 		flow->npc_action |= (uint64_t)mark << 40;
 
-	if (rte_atomic32_read(&npc->mark_actions) == 1)
+	if (rte_atomic32_read(&npc->mark_actions) == 1) {
 		hw->rx_offload_flags |=
 			NIX_RX_OFFLOAD_MARK_UPDATE_F;
+		otx2_eth_set_rx_function(dev);
+	}
 
 set_pf_func:
 	/* Ideally AF must ensure that correct pf_func is set */
diff --git a/drivers/net/octeontx2/otx2_ptp.c b/drivers/net/octeontx2/otx2_ptp.c
index 5291da241..0186c629a 100644
--- a/drivers/net/octeontx2/otx2_ptp.c
+++ b/drivers/net/octeontx2/otx2_ptp.c
@@ -118,6 +118,10 @@ otx2_nix_timesync_enable(struct rte_eth_dev *eth_dev)
 			struct otx2_eth_txq *txq = eth_dev->data->tx_queues[i];
 			otx2_nix_form_default_desc(txq);
 		}
+
+		/* Setting up the function pointers as per new offload flags */
+		otx2_eth_set_rx_function(eth_dev);
+		otx2_eth_set_tx_function(eth_dev);
 	}
 	return rc;
 }
@@ -147,6 +151,10 @@ otx2_nix_timesync_disable(struct rte_eth_dev *eth_dev)
 			struct otx2_eth_txq *txq = eth_dev->data->tx_queues[i];
 			otx2_nix_form_default_desc(txq);
 		}
+
+		/* Setting up the function pointers as per new offload flags */
+		otx2_eth_set_rx_function(eth_dev);
+		otx2_eth_set_tx_function(eth_dev);
 	}
 	return rc;
 }
diff --git a/drivers/net/octeontx2/otx2_vlan.c b/drivers/net/octeontx2/otx2_vlan.c
index dc0f4e032..189c45174 100644
--- a/drivers/net/octeontx2/otx2_vlan.c
+++ b/drivers/net/octeontx2/otx2_vlan.c
@@ -760,6 +760,7 @@ otx2_nix_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
 			DEV_RX_OFFLOAD_QINQ_STRIP)) {
 		dev->rx_offloads |= offloads;
 		dev->rx_offload_flags |= NIX_RX_OFFLOAD_VLAN_STRIP_F;
+		otx2_eth_set_rx_function(eth_dev);
 	}
 
 done:
-- 
2.21.0