From: Damian Nowak <damianx.nowak@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, fiona.trahe@intel.com,
arkadiuszx.kusztal@intel.com,
Damian Nowak <damianx.nowak@intel.com>
Subject: [dpdk-dev] [PATCH v3 6/8] test/crypto: add kasumi test cases for auth-cipher
Date: Wed, 3 Jul 2019 13:15:56 +0200 [thread overview]
Message-ID: <20190703111558.11552-7-damianx.nowak@intel.com> (raw)
In-Reply-To: <20190703111558.11552-1-damianx.nowak@intel.com>
This patch adds test cases for kasumi in-place
and out-of-place auth-cipher operations. Test
cases include buffer appended digest generation
with encryption and buffer decryption with
appended digest verification.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
---
app/test/test_cryptodev.c | 221 +++++++++++++++++++++-----
app/test/test_cryptodev_kasumi_test_vectors.h | 98 ++++++++++--
2 files changed, 269 insertions(+), 50 deletions(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 757722a..518d3b5 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -4545,87 +4545,164 @@ test_snow3g_auth_cipher(const struct snow3g_test_data *tdata,
}
static int
-test_kasumi_auth_cipher(const struct kasumi_test_data *tdata)
+test_kasumi_auth_cipher(const struct kasumi_test_data *tdata,
+ uint8_t op_mode, uint8_t verify)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
int retval;
- uint8_t *plaintext, *ciphertext;
- unsigned plaintext_pad_len;
- unsigned plaintext_len;
+ uint8_t *plaintext = NULL, *ciphertext = NULL;
+ unsigned int plaintext_pad_len;
+ unsigned int plaintext_len;
+ unsigned int ciphertext_pad_len;
+ unsigned int ciphertext_len;
+
+ struct rte_cryptodev_info dev_info;
+
+ rte_cryptodev_info_get(ts_params->valid_devs[0], &dev_info);
+
+ uint64_t feat_flags = dev_info.feature_flags;
+
+ if (op_mode == OUT_OF_PLACE) {
+ if (!(feat_flags & RTE_CRYPTODEV_FF_DIGEST_ENCRYPTED)) {
+ printf("Device doesn't support digest encrypted.\n");
+ return -ENOTSUP;
+ }
+ }
/* Create KASUMI session */
retval = create_wireless_algo_auth_cipher_session(
ts_params->valid_devs[0],
- RTE_CRYPTO_CIPHER_OP_ENCRYPT,
- RTE_CRYPTO_AUTH_OP_GENERATE,
+ (verify ? RTE_CRYPTO_CIPHER_OP_DECRYPT
+ : RTE_CRYPTO_CIPHER_OP_ENCRYPT),
+ (verify ? RTE_CRYPTO_AUTH_OP_VERIFY
+ : RTE_CRYPTO_AUTH_OP_GENERATE),
RTE_CRYPTO_AUTH_KASUMI_F9,
RTE_CRYPTO_CIPHER_KASUMI_F8,
tdata->key.data, tdata->key.len,
0, tdata->digest.len,
tdata->cipher_iv.len);
+
if (retval < 0)
return retval;
+
ut_params->ibuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
+ if (op_mode == OUT_OF_PLACE)
+ ut_params->obuf = rte_pktmbuf_alloc(ts_params->mbuf_pool);
/* clear mbuf payload */
memset(rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *), 0,
- rte_pktmbuf_tailroom(ut_params->ibuf));
+ rte_pktmbuf_tailroom(ut_params->ibuf));
+ if (op_mode == OUT_OF_PLACE)
+ memset(rte_pktmbuf_mtod(ut_params->obuf, uint8_t *), 0,
+ rte_pktmbuf_tailroom(ut_params->obuf));
+ ciphertext_len = ceil_byte_length(tdata->ciphertext.len);
plaintext_len = ceil_byte_length(tdata->plaintext.len);
- /* Append data which is padded to a multiple of */
- /* the algorithms block size */
+ ciphertext_pad_len = RTE_ALIGN_CEIL(ciphertext_len, 16);
plaintext_pad_len = RTE_ALIGN_CEIL(plaintext_len, 16);
- plaintext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
- plaintext_pad_len);
- memcpy(plaintext, tdata->plaintext.data, plaintext_len);
- debug_hexdump(stdout, "plaintext:", plaintext, plaintext_len);
+ if (verify) {
+ ciphertext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+ ciphertext_pad_len);
+ memcpy(ciphertext, tdata->ciphertext.data, ciphertext_len);
+ if (op_mode == OUT_OF_PLACE)
+ rte_pktmbuf_append(ut_params->obuf, ciphertext_pad_len);
+ debug_hexdump(stdout, "ciphertext:", ciphertext,
+ ciphertext_len);
+ } else {
+ plaintext = (uint8_t *)rte_pktmbuf_append(ut_params->ibuf,
+ plaintext_pad_len);
+ memcpy(plaintext, tdata->plaintext.data, plaintext_len);
+ if (op_mode == OUT_OF_PLACE)
+ rte_pktmbuf_append(ut_params->obuf, plaintext_pad_len);
+ debug_hexdump(stdout, "plaintext:", plaintext,
+ plaintext_len);
+ }
/* Create KASUMI operation */
- retval = create_wireless_algo_auth_cipher_operation(tdata->digest.len,
- tdata->cipher_iv.data, tdata->cipher_iv.len,
- NULL, 0,
- plaintext_pad_len,
- tdata->validCipherLenInBits.len,
- tdata->validCipherOffsetInBits.len,
- tdata->validAuthLenInBits.len,
- 0,
- IN_PLACE);
+ retval = create_wireless_algo_auth_cipher_operation(
+ tdata->digest.len,
+ tdata->cipher_iv.data, tdata->cipher_iv.len,
+ NULL, 0,
+ (tdata->digest.offset_bytes == 0 ?
+ (verify ? ciphertext_pad_len : plaintext_pad_len)
+ : tdata->digest.offset_bytes),
+ tdata->validCipherLenInBits.len,
+ tdata->validCipherOffsetInBits.len,
+ tdata->validAuthLenInBits.len,
+ 0,
+ op_mode);
if (retval < 0)
return retval;
ut_params->op = process_crypto_request(ts_params->valid_devs[0],
ut_params->op);
+
TEST_ASSERT_NOT_NULL(ut_params->op, "failed to retrieve obuf");
- if (ut_params->op->sym->m_dst)
- ut_params->obuf = ut_params->op->sym->m_dst;
- else
- ut_params->obuf = ut_params->op->sym->m_src;
- ciphertext = rte_pktmbuf_mtod_offset(ut_params->obuf, uint8_t *,
- tdata->validCipherOffsetInBits.len >> 3);
+ ut_params->obuf = (op_mode == IN_PLACE ?
+ ut_params->op->sym->m_src : ut_params->op->sym->m_dst);
+
+
+ if (verify) {
+ if (ut_params->obuf)
+ plaintext = rte_pktmbuf_mtod(ut_params->obuf,
+ uint8_t *);
+ else
+ plaintext = ciphertext;
+
+ debug_hexdump(stdout, "plaintext:", plaintext,
+ (tdata->plaintext.len >> 3) - tdata->digest.len);
+ debug_hexdump(stdout, "plaintext expected:",
+ tdata->plaintext.data,
+ (tdata->plaintext.len >> 3) - tdata->digest.len);
+ } else {
+ if (ut_params->obuf)
+ ciphertext = rte_pktmbuf_mtod(ut_params->obuf,
+ uint8_t *);
+ else
+ ciphertext = plaintext;
+
+ debug_hexdump(stdout, "ciphertext:", ciphertext,
+ ciphertext_len);
+ debug_hexdump(stdout, "ciphertext expected:",
+ tdata->ciphertext.data, tdata->ciphertext.len >> 3);
+
+ ut_params->digest = rte_pktmbuf_mtod(
+ ut_params->obuf, uint8_t *) +
+ (tdata->digest.offset_bytes == 0 ?
+ plaintext_pad_len : tdata->digest.offset_bytes);
+
+ debug_hexdump(stdout, "digest:", ut_params->digest,
+ tdata->digest.len);
+ debug_hexdump(stdout, "digest expected:",
+ tdata->digest.data, tdata->digest.len);
+ }
- const uint8_t *reference_ciphertext = tdata->ciphertext.data +
- (tdata->validCipherOffsetInBits.len >> 3);
/* Validate obuf */
- TEST_ASSERT_BUFFERS_ARE_EQUAL_BIT(
+ if (verify) {
+ TEST_ASSERT_BUFFERS_ARE_EQUAL_BIT(
+ plaintext,
+ tdata->plaintext.data,
+ tdata->plaintext.len >> 3,
+ "KASUMI Plaintext data not as expected");
+ } else {
+ TEST_ASSERT_BUFFERS_ARE_EQUAL_BIT(
ciphertext,
- reference_ciphertext,
- tdata->validCipherLenInBits.len,
+ tdata->ciphertext.data,
+ tdata->ciphertext.len >> 3,
"KASUMI Ciphertext data not as expected");
- ut_params->digest = rte_pktmbuf_mtod(ut_params->ibuf, uint8_t *)
- + plaintext_pad_len;
- /* Validate obuf */
- TEST_ASSERT_BUFFERS_ARE_EQUAL(
+ TEST_ASSERT_BUFFERS_ARE_EQUAL(
ut_params->digest,
tdata->digest.data,
DIGEST_BYTE_LENGTH_KASUMI_F9,
"KASUMI Generated auth tag not as expected");
+ }
return 0;
}
@@ -5428,7 +5505,43 @@ test_snow3g_auth_cipher_with_digest_test_case_1(void)
static int
test_kasumi_auth_cipher_test_case_1(void)
{
- return test_kasumi_auth_cipher(&kasumi_test_case_3);
+ return test_kasumi_auth_cipher(
+ &kasumi_test_case_3, IN_PLACE, 0);
+}
+
+static int
+test_kasumi_auth_cipher_test_case_2(void)
+{
+ return test_kasumi_auth_cipher(
+ &kasumi_auth_cipher_test_case_2, IN_PLACE, 0);
+}
+
+static int
+test_kasumi_auth_cipher_test_case_2_oop(void)
+{
+ return test_kasumi_auth_cipher(
+ &kasumi_auth_cipher_test_case_2, OUT_OF_PLACE, 0);
+}
+
+static int
+test_kasumi_auth_cipher_verify_test_case_1(void)
+{
+ return test_kasumi_auth_cipher(
+ &kasumi_test_case_3, IN_PLACE, 1);
+}
+
+static int
+test_kasumi_auth_cipher_verify_test_case_2(void)
+{
+ return test_kasumi_auth_cipher(
+ &kasumi_auth_cipher_test_case_2, IN_PLACE, 1);
+}
+
+static int
+test_kasumi_auth_cipher_verify_test_case_2_oop(void)
+{
+ return test_kasumi_auth_cipher(
+ &kasumi_auth_cipher_test_case_2, OUT_OF_PLACE, 1);
}
static int
@@ -9728,9 +9841,23 @@ static struct unit_test_suite cryptodev_qat_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown,
test_kasumi_encryption_test_case_3),
TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_cipher_auth_test_case_1),
+
+ /** KASUMI generate auth, then encrypt (F8) */
+ TEST_CASE_ST(ut_setup, ut_teardown,
test_kasumi_auth_cipher_test_case_1),
TEST_CASE_ST(ut_setup, ut_teardown,
- test_kasumi_cipher_auth_test_case_1),
+ test_kasumi_auth_cipher_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_auth_cipher_test_case_2_oop),
+
+ /** KASUMI decrypt (F8), then verify auth */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_auth_cipher_verify_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_auth_cipher_verify_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_auth_cipher_verify_test_case_2_oop),
/** Negative tests */
TEST_CASE_ST(ut_setup, ut_teardown,
@@ -10347,9 +10474,23 @@ static struct unit_test_suite cryptodev_sw_kasumi_testsuite = {
TEST_CASE_ST(ut_setup, ut_teardown,
test_kasumi_hash_verify_test_case_5),
TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_cipher_auth_test_case_1),
+
+ /** KASUMI generate auth, then encrypt (F8) */
+ TEST_CASE_ST(ut_setup, ut_teardown,
test_kasumi_auth_cipher_test_case_1),
TEST_CASE_ST(ut_setup, ut_teardown,
- test_kasumi_cipher_auth_test_case_1),
+ test_kasumi_auth_cipher_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_auth_cipher_test_case_2_oop),
+
+ /** KASUMI decrypt (F8), then verify auth */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_auth_cipher_verify_test_case_1),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_auth_cipher_verify_test_case_2),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_kasumi_auth_cipher_verify_test_case_2_oop),
TEST_CASES_END() /**< NULL terminate unit test array */
}
};
diff --git a/app/test/test_cryptodev_kasumi_test_vectors.h b/app/test/test_cryptodev_kasumi_test_vectors.h
index 58a696a..f0a6d55 100644
--- a/app/test/test_cryptodev_kasumi_test_vectors.h
+++ b/app/test/test_cryptodev_kasumi_test_vectors.h
@@ -8,12 +8,12 @@
struct kasumi_test_data {
struct {
uint8_t data[64];
- unsigned len;
+ unsigned int len;
} key;
struct {
uint8_t data[64] __rte_aligned(16);
- unsigned len;
+ unsigned int len;
} cipher_iv;
/*
@@ -23,20 +23,20 @@ struct kasumi_test_data {
*/
struct {
uint8_t data[1024];
- unsigned len; /* length must be in Bits */
+ unsigned int len; /* length must be in Bits */
} plaintext;
struct {
- unsigned len;
+ unsigned int len;
} validDataLenInBits;
struct {
uint8_t data[1024];
- unsigned len; /* length must be in Bits */
+ unsigned int len; /* length must be in Bits */
} ciphertext;
struct {
- unsigned len;
+ unsigned int len;
} validCipherLenInBits;
struct {
@@ -45,12 +45,13 @@ struct kasumi_test_data {
/* Actual length of data to be hashed */
struct {
- unsigned len;
+ unsigned int len;
} validAuthLenInBits;
struct {
uint8_t data[64];
- unsigned len;
+ unsigned int len;
+ unsigned int offset_bytes; /* offset must be in Bytes */
} digest;
};
@@ -205,7 +206,8 @@ struct kasumi_test_data kasumi_test_case_3 = {
},
.digest = {
.data = {0x87, 0x5F, 0xE4, 0x89},
- .len = 4
+ .len = 4,
+ .offset_bytes = 0
}
};
@@ -353,7 +355,83 @@ struct kasumi_test_data kasumi_test_case_6 = {
},
.digest = {
.data = {0x0F, 0xD2, 0xAA, 0xB5},
- .len = 4
+ .len = 4,
+ .offset_bytes = 0
+ }
+};
+
+struct kasumi_test_data kasumi_auth_cipher_test_case_2 = {
+ .key = {
+ .data = {
+ 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10
+ },
+ .len = 16
+ },
+ .cipher_iv = {
+ .data = {
+ 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08
+ },
+ .len = 8
+ },
+ .plaintext = {
+ .data = {
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A,
+ 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A
+ },
+ .len = 128 << 3
+ },
+ .ciphertext = {
+ .data = {
+ 0x5A, 0x5A, 0xFA, 0xC6, 0xA9, 0x09, 0x91, 0x74,
+ 0x35, 0xAA, 0x85, 0xB0, 0xE0, 0x07, 0x78, 0xDA,
+ 0x05, 0x88, 0x4E, 0x8D, 0xEC, 0x41, 0xF3, 0xBC,
+ 0x0D, 0x9F, 0xE3, 0xEF, 0x8E, 0x33, 0x22, 0xF3,
+ 0x15, 0x4B, 0x12, 0xC2, 0x22, 0x12, 0xD6, 0x46,
+ 0xD7, 0x27, 0x20, 0x1D, 0x50, 0x60, 0x9D, 0x42,
+ 0xF6, 0x73, 0xF5, 0x28, 0x88, 0xBE, 0x60, 0xEC,
+ 0x9C, 0x18, 0x81, 0xC4, 0x0A, 0xF4, 0xD5, 0x7A,
+ 0xB5, 0x3F, 0x1A, 0x79, 0xAB, 0x79, 0xDB, 0x24,
+ 0xF9, 0x6E, 0x86, 0x78, 0x10, 0x19, 0xAE, 0xD8,
+ 0xB2, 0xCA, 0x32, 0x8D, 0xD8, 0x28, 0x8B, 0x2F,
+ 0x5B, 0x3C, 0xE3, 0x7D, 0xD3, 0x70, 0x11, 0xDE,
+ 0x2C, 0xDC, 0xC1, 0xC6, 0xB6, 0xFD, 0xF3, 0x7D,
+ 0x38, 0x97, 0x8B, 0x81, 0x02, 0x88, 0x62, 0x3C,
+ 0x1E, 0x1A, 0x93, 0x21, 0xE3, 0x6D, 0xD7, 0x20,
+ 0x80, 0xA8, 0xDA, 0x18, 0x8F, 0x58, 0x0F, 0x4E
+ },
+ .len = 128 << 3
+ },
+ .validDataLenInBits = {
+ .len = 128 << 3
+ },
+ .validCipherLenInBits = {
+ .len = 126 << 3
+ },
+ .validAuthLenInBits = {
+ .len = 124 << 3
+ },
+ .validCipherOffsetInBits = {
+ .len = 2 << 3
+ },
+ .digest = {
+ .data = {0x8F, 0x58, 0x0F, 0x4E},
+ .len = 4,
+ .offset_bytes = 124
}
};
#endif /* TEST_CRYPTODEV_KASUMI_TEST_VECTORS_H_ */
--
2.7.4
next prev parent reply other threads:[~2019-07-03 11:17 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 14:50 [dpdk-dev] [PATCH 0/9] add QAT support for digest encrypted Nowak
2019-06-03 14:50 ` [dpdk-dev] [PATCH 1/9] crypto/qat: check buffer size for oop auth-cipher Nowak
2019-06-03 14:50 ` [dpdk-dev] [PATCH 2/9] test/crypto: add snow3g test cases for oop operation Nowak
2019-06-03 14:50 ` [dpdk-dev] [PATCH 3/9] test/crypto: add kasumi " Nowak
2019-06-03 14:50 ` [dpdk-dev] [PATCH 4/9] test/crypto: add sgl test cases for ip and oop Nowak
2019-06-03 14:50 ` [dpdk-dev] [PATCH 5/9] cryptodev: document usage of digest-appended operations Nowak
2019-06-04 9:11 ` Mcnamara, John
2019-06-03 14:50 ` [dpdk-dev] [PATCH 6/9] cryptodev: add digest encrypted feature flag Nowak
2019-06-03 14:50 ` [dpdk-dev] [PATCH 7/9] crypto/qat: " Nowak
2019-06-04 13:45 ` Trahe, Fiona
2019-06-03 14:50 ` [dpdk-dev] [PATCH 8/9] test/crypto: add digest encrypted feature flag check Nowak
2019-06-03 14:50 ` [dpdk-dev] [PATCH 9/9] test/crypto: return correct value if feature not supported Nowak
2019-06-04 13:16 ` [dpdk-dev] [PATCH 0/9] add QAT support for digest encrypted Trahe, Fiona
2019-06-07 10:05 ` [dpdk-dev] [PATCH v2 00/10] cryptodev: support encrypted-digest use-cases Damian Nowak
2019-06-07 10:05 ` [dpdk-dev] [PATCH v2 01/10] cryptodev: document usage of digest-appended operations Damian Nowak
2019-06-13 13:56 ` Trahe, Fiona
2019-06-07 10:05 ` [dpdk-dev] [PATCH v2 02/10] cryptodev: add digest encrypted feature flag Damian Nowak
2019-06-13 14:16 ` Trahe, Fiona
2019-06-07 10:06 ` [dpdk-dev] [PATCH v2 03/10] crypto/qat: handle buffer size for digest-encrypted auth-cipher Damian Nowak
2019-06-07 10:06 ` [dpdk-dev] [PATCH v2 04/10] crypto/qat: add digest encrypted feature flag Damian Nowak
2019-06-13 8:18 ` Akhil Goyal
2019-06-07 10:06 ` [dpdk-dev] [PATCH v2 05/10] test/crypto: add snow3g test cases for auth-cipher Damian Nowak
2019-06-07 10:06 ` [dpdk-dev] [PATCH v2 06/10] test/crypto: add kasumi " Damian Nowak
2019-06-07 10:06 ` [dpdk-dev] [PATCH v2 07/10] test/crypto: add sgl test cases for ip and oop Damian Nowak
2019-06-07 10:06 ` [dpdk-dev] [PATCH v2 08/10] test/crypto: return correct value if feature not supported Damian Nowak
2019-06-07 10:06 ` [dpdk-dev] [PATCH v2 09/10] doc/crypto: document digest-encrypted limitations in qat Damian Nowak
2019-06-13 8:12 ` Akhil Goyal
2019-06-07 10:06 ` [dpdk-dev] [PATCH v2 10/10] doc: update release notes for 19.08 Damian Nowak
2019-06-13 8:14 ` Akhil Goyal
2019-07-03 11:15 ` [dpdk-dev] [PATCH v3 0/8] cryptodev: support encrypted-digest use-cases Damian Nowak
2019-07-03 11:15 ` [dpdk-dev] [PATCH v3 1/8] cryptodev: document usage of digest-appended operations Damian Nowak
2019-07-03 16:13 ` De Lara Guarch, Pablo
2019-07-03 11:15 ` [dpdk-dev] [PATCH v3 2/8] cryptodev: add digest encrypted feature flag Damian Nowak
2019-07-03 16:14 ` De Lara Guarch, Pablo
2019-07-05 7:10 ` Akhil Goyal
2019-07-03 11:15 ` [dpdk-dev] [PATCH v3 3/8] crypto/qat: extend support for digest-encrypted auth-cipher Damian Nowak
2019-07-03 11:15 ` [dpdk-dev] [PATCH v3 4/8] test/crypto: add snow3g test cases for auth-cipher Damian Nowak
2019-07-03 11:15 ` [dpdk-dev] [PATCH v3 5/8] test/crypto: add zuc " Damian Nowak
2019-07-03 11:15 ` Damian Nowak [this message]
2019-07-03 11:15 ` [dpdk-dev] [PATCH v3 7/8] test/crypto: add sgl test cases for ip and oop Damian Nowak
2019-07-03 11:15 ` [dpdk-dev] [PATCH v3 8/8] test/crypto: return correct value if feature not supported Damian Nowak
2019-07-03 15:28 ` [dpdk-dev] [PATCH v3 0/8] cryptodev: support encrypted-digest use-cases Trahe, Fiona
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190703111558.11552-7-damianx.nowak@intel.com \
--to=damianx.nowak@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=arkadiuszx.kusztal@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).