From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
Gaetan Rivet <gaetan.rivet@6wind.com>
Subject: [dpdk-dev] [PATCH v3 1/2] ethdev: expose basic xstats for driver use
Date: Sun, 11 Aug 2019 09:06:06 -0700 [thread overview]
Message-ID: <20190811160607.16441-2-stephen@networkplumber.org> (raw)
In-Reply-To: <20190811160607.16441-1-stephen@networkplumber.org>
Avoid duplication by having generic basic xstats available
for use by drivers. A later patch uses this for failsafe
driver.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
---
lib/librte_ethdev/rte_ethdev.c | 17 +++----
lib/librte_ethdev/rte_ethdev_driver.h | 65 ++++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev_version.map | 24 +++++++++
3 files changed, 97 insertions(+), 9 deletions(-)
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 17d183e1f0ec..88e3065d06fd 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -1996,8 +1996,8 @@ rte_eth_stats_reset(uint16_t port_id)
return 0;
}
-static inline int
-get_xstats_basic_count(struct rte_eth_dev *dev)
+int
+rte_eth_basic_stats_count(struct rte_eth_dev *dev)
{
uint16_t nb_rxqs, nb_txqs;
int count;
@@ -2034,7 +2034,7 @@ get_xstats_count(uint16_t port_id)
count = 0;
- count += get_xstats_basic_count(dev);
+ count += rte_eth_basic_stats_count(dev);
return count;
}
@@ -2084,7 +2084,7 @@ rte_eth_xstats_get_id_by_name(uint16_t port_id, const char *xstat_name,
}
/* retrieve basic stats names */
-static int
+int
rte_eth_basic_stats_get_names(struct rte_eth_dev *dev,
struct rte_eth_xstat_name *xstats_names)
{
@@ -2140,7 +2140,7 @@ rte_eth_xstats_get_names_by_id(uint16_t port_id,
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
dev = &rte_eth_devices[port_id];
- basic_count = get_xstats_basic_count(dev);
+ basic_count = rte_eth_basic_stats_count(dev);
ret = get_xstats_count(port_id);
if (ret < 0)
return ret;
@@ -2268,8 +2268,7 @@ rte_eth_xstats_get_names(uint16_t port_id,
return cnt_used_entries;
}
-
-static int
+int
rte_eth_basic_stats_get(uint16_t port_id, struct rte_eth_xstat *xstats)
{
struct rte_eth_dev *dev;
@@ -2341,7 +2340,7 @@ rte_eth_xstats_get_by_id(uint16_t port_id, const uint64_t *ids,
expected_entries = (uint16_t)ret;
struct rte_eth_xstat xstats[expected_entries];
dev = &rte_eth_devices[port_id];
- basic_count = get_xstats_basic_count(dev);
+ basic_count = rte_eth_basic_stats_count(dev);
/* Return max number of stats if no ids given */
if (!ids) {
@@ -2355,7 +2354,7 @@ rte_eth_xstats_get_by_id(uint16_t port_id, const uint64_t *ids,
return -EINVAL;
if (ids && dev->dev_ops->xstats_get_by_id != NULL && size) {
- unsigned int basic_count = get_xstats_basic_count(dev);
+ unsigned int basic_count = rte_eth_basic_stats_count(dev);
uint64_t ids_copy[size];
for (i = 0; i < size; i++) {
diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
index 936ff8c98651..489889a72203 100644
--- a/lib/librte_ethdev/rte_ethdev_driver.h
+++ b/lib/librte_ethdev/rte_ethdev_driver.h
@@ -208,6 +208,71 @@ rte_eth_linkstatus_get(const struct rte_eth_dev *dev,
#endif
}
+/**
+ * @internal
+ * Get basic stats part of xstats for an ethernet device.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ */
+__rte_experimental
+int
+rte_eth_basic_stats_count(struct rte_eth_dev *dev);
+
+/**
+ * @internal
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the names for the basic part of extended statistics.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ * @param xstats_names
+ * An rte_eth_xstat_name array of at least *size* elements to
+ * be filled. If set to NULL, the function returns the required number
+ * of elements.
+ * @return
+ * - A positive value lower or equal to size: success. The return value
+ * is the number of entries filled in the stats table.
+ * - A positive value higher than size: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - A negative value on error (invalid port id).
+ */
+__rte_experimental
+int
+rte_eth_basic_stats_get_names(struct rte_eth_dev *dev,
+ struct rte_eth_xstat_name *xstats_names);
+
+/**
+ * @internal
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the basic part of the extended statistics.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ * @param xstats
+ * A pointer to a table of structure of type *rte_eth_xstat*
+ * to be filled with device statistics ids and values.
+ * This parameter can be set to NULL if n is 0.
+ * @param n
+ * The size of the xstats array (number of elements).
+ * @return
+ * - A positive value lower or equal to n: success. The return value
+ * is the number of entries filled in the stats table.
+ * - A positive value higher than n: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - A negative value on error (invalid port id).
+ */
+__rte_experimental
+int
+rte_eth_basic_stats_get(uint16_t port_id, struct rte_eth_xstat *xstats);
+
+
/**
* @warning
* @b EXPERIMENTAL: this API may change without prior notice.
diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
index 6df42a47b89d..f2198b0367d1 100644
--- a/lib/librte_ethdev/rte_ethdev_version.map
+++ b/lib/librte_ethdev/rte_ethdev_version.map
@@ -240,6 +240,25 @@ EXPERIMENTAL {
global:
# added in 17.11
+ rte_eth_devargs_parse;
+ rte_eth_dev_create;
+ rte_eth_dev_destroy;
+ rte_eth_dev_get_module_eeprom;
+ rte_eth_dev_get_module_info;
+ rte_eth_dev_is_removed;
+ rte_eth_dev_owner_delete;
+ rte_eth_dev_owner_get;
+ rte_eth_dev_owner_new;
+ rte_eth_dev_owner_set;
+ rte_eth_dev_owner_unset;
+ rte_eth_dev_rx_intr_ctl_q_get_fd;
+ rte_eth_find_next_of;
+ rte_eth_find_next_sibling;
+ rte_eth_read_clock;
+ rte_eth_switch_domain_alloc;
+ rte_eth_switch_domain_free;
+ rte_flow_conv;
+ rte_flow_expand_rss;
rte_mtr_capabilities_get;
rte_mtr_create;
rte_mtr_destroy;
@@ -283,4 +302,9 @@ EXPERIMENTAL {
# added in 19.08
rte_eth_read_clock;
+
+ # added in 19.11
+ rte_eth_basic_stats_count;
+ rte_eth_basic_stats_get;
+ rte_eth_basic_stats_get_names;
};
--
2.20.1
next prev parent reply other threads:[~2019-08-11 16:06 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 22:21 [dpdk-dev] [PATCH 0/2] failsafe: add xstats Stephen Hemminger
2019-06-26 22:21 ` [dpdk-dev] [PATCH 1/2] ethdev: expose basic xstats for driver use Stephen Hemminger
2019-06-26 22:21 ` [dpdk-dev] [PATCH 2/2] failsafe: implement xstats Stephen Hemminger
2019-06-26 23:33 ` [dpdk-dev] [PATCH v2 0/2] failsafe: add xstats Stephen Hemminger
2019-06-26 23:33 ` [dpdk-dev] [PATCH v2 1/2] ethdev: expose basic xstats for driver use Stephen Hemminger
2019-07-01 10:54 ` Andrew Rybchenko
2019-07-01 14:59 ` Stephen Hemminger
2019-06-26 23:33 ` [dpdk-dev] [PATCH v2 2/2] failsafe: implement xstats Stephen Hemminger
2019-07-01 12:33 ` Gaëtan Rivet
2019-07-03 17:25 ` [dpdk-dev] [PATCH v2 0/2] *failsafe: add xstats Stephen Hemminger
2019-07-03 17:25 ` [dpdk-dev] [PATCH v2 1/2] ethdev: expose basic xstats for driver use Stephen Hemminger
2019-07-03 17:25 ` [dpdk-dev] [PATCH v2 2/2] failsafe: implement xstats Stephen Hemminger
2019-07-04 9:56 ` [dpdk-dev] [PATCH v2 0/2] *failsafe: add xstats Gaëtan Rivet
2019-08-11 16:06 ` [dpdk-dev] [PATCH v3 0/2] failsafe: " Stephen Hemminger
2019-08-11 16:06 ` Stephen Hemminger [this message]
2019-08-11 16:06 ` [dpdk-dev] [PATCH v3 2/2] net/failsafe: implement xstats Stephen Hemminger
2019-09-19 12:56 ` [dpdk-dev] [PATCH v4 0/2] failsafe: add xstats Stephen Hemminger
2019-09-19 12:56 ` [dpdk-dev] [PATCH 1/2] ethdev: expose basic xstats for driver use Stephen Hemminger
2019-09-19 12:56 ` [dpdk-dev] [PATCH 2/2] net/failsafe: implement xstats Stephen Hemminger
2019-09-19 13:17 ` [dpdk-dev] [PATCH v5 0/2] failsafe: add xstats Stephen Hemminger
2019-09-19 13:17 ` [dpdk-dev] [PATCH v5 1/2] ethdev: expose basic xstats for driver use Stephen Hemminger
2019-09-26 12:46 ` Andrew Rybchenko
2019-09-26 16:09 ` Stephen Hemminger
2019-10-31 16:40 ` Stephen Hemminger
2019-09-19 13:17 ` [dpdk-dev] [PATCH v5 2/2] net/failsafe: implement xstats Stephen Hemminger
2019-10-17 14:54 ` Ferruh Yigit
2019-10-14 17:04 ` [dpdk-dev] [PATCH v5 0/2] failsafe: add xstats Stephen Hemminger
2019-10-15 9:08 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190811160607.16441-2-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=gaetan.rivet@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).