From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id C7F5DA0613 for ; Mon, 26 Aug 2019 12:49:39 +0200 (CEST) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id D61171C011; Mon, 26 Aug 2019 12:48:46 +0200 (CEST) Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by dpdk.org (Postfix) with ESMTP id 8A6C11BFE5 for ; Mon, 26 Aug 2019 12:48:40 +0200 (CEST) X-Amp-Result: SKIPPED(no attachment in message) X-Amp-File-Uploaded: False Received: from orsmga003.jf.intel.com ([10.7.209.27]) by orsmga101.jf.intel.com with ESMTP/TLS/DHE-RSA-AES256-GCM-SHA384; 26 Aug 2019 03:48:40 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.64,431,1559545200"; d="scan'208";a="182402102" Received: from dpdk51.sh.intel.com ([10.67.110.245]) by orsmga003.jf.intel.com with ESMTP; 26 Aug 2019 03:48:38 -0700 From: Qi Zhang To: wenzhuo.lu@intel.com, qiming.yang@intel.com Cc: dev@dpdk.org, xiaolong.ye@intel.com, Qi Zhang , Paul M Stillwell Jr Date: Mon, 26 Aug 2019 18:50:10 +0800 Message-Id: <20190826105105.19121-9-qi.z.zhang@intel.com> X-Mailer: git-send-email 2.13.6 In-Reply-To: <20190826105105.19121-1-qi.z.zhang@intel.com> References: <20190826105105.19121-1-qi.z.zhang@intel.com> Subject: [dpdk-dev] [PATCH 08/63] net/ice/base: remove debug code X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Remove firmware logging debug code. Signed-off-by: Paul M Stillwell Jr Signed-off-by: Qi Zhang --- drivers/net/ice/base/ice_adminq_cmd.h | 88 -------------- drivers/net/ice/base/ice_common.c | 223 ---------------------------------- drivers/net/ice/base/ice_common.h | 1 - drivers/net/ice/base/ice_type.h | 20 --- 4 files changed, 332 deletions(-) diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h index b5faa5bf6..9e5853cca 100644 --- a/drivers/net/ice/base/ice_adminq_cmd.h +++ b/drivers/net/ice/base/ice_adminq_cmd.h @@ -2176,87 +2176,6 @@ struct ice_aqc_event_lan_overflow { -/* Configure Firmware Logging Command (indirect 0xFF09) - * Logging Information Read Response (indirect 0xFF10) - * Note: The 0xFF10 command has no input parameters. - */ -struct ice_aqc_fw_logging { - u8 log_ctrl; -#define ICE_AQC_FW_LOG_AQ_EN BIT(0) -#define ICE_AQC_FW_LOG_UART_EN BIT(1) - u8 rsvd0; - u8 log_ctrl_valid; /* Not used by 0xFF10 Response */ -#define ICE_AQC_FW_LOG_AQ_VALID BIT(0) -#define ICE_AQC_FW_LOG_UART_VALID BIT(1) - u8 rsvd1[5]; - __le32 addr_high; - __le32 addr_low; -}; - - -enum ice_aqc_fw_logging_mod { - ICE_AQC_FW_LOG_ID_GENERAL = 0, - ICE_AQC_FW_LOG_ID_CTRL, - ICE_AQC_FW_LOG_ID_LINK, - ICE_AQC_FW_LOG_ID_LINK_TOPO, - ICE_AQC_FW_LOG_ID_DNL, - ICE_AQC_FW_LOG_ID_I2C, - ICE_AQC_FW_LOG_ID_SDP, - ICE_AQC_FW_LOG_ID_MDIO, - ICE_AQC_FW_LOG_ID_ADMINQ, - ICE_AQC_FW_LOG_ID_HDMA, - ICE_AQC_FW_LOG_ID_LLDP, - ICE_AQC_FW_LOG_ID_DCBX, - ICE_AQC_FW_LOG_ID_DCB, - ICE_AQC_FW_LOG_ID_NETPROXY, - ICE_AQC_FW_LOG_ID_NVM, - ICE_AQC_FW_LOG_ID_AUTH, - ICE_AQC_FW_LOG_ID_VPD, - ICE_AQC_FW_LOG_ID_IOSF, - ICE_AQC_FW_LOG_ID_PARSER, - ICE_AQC_FW_LOG_ID_SW, - ICE_AQC_FW_LOG_ID_SCHEDULER, - ICE_AQC_FW_LOG_ID_TXQ, - ICE_AQC_FW_LOG_ID_RSVD, - ICE_AQC_FW_LOG_ID_POST, - ICE_AQC_FW_LOG_ID_WATCHDOG, - ICE_AQC_FW_LOG_ID_TASK_DISPATCH, - ICE_AQC_FW_LOG_ID_MNG, - ICE_AQC_FW_LOG_ID_SYNCE, - ICE_AQC_FW_LOG_ID_MAX, -}; - -/* This is the buffer for both of the logging commands. - * The entry array size depends on the datalen parameter in the descriptor. - * There will be a total of datalen / 2 entries. - */ -struct ice_aqc_fw_logging_data { - __le16 entry[1]; -#define ICE_AQC_FW_LOG_ID_S 0 -#define ICE_AQC_FW_LOG_ID_M (0xFFF << ICE_AQC_FW_LOG_ID_S) - -#define ICE_AQC_FW_LOG_CONF_SUCCESS 0 /* Used by response */ -#define ICE_AQC_FW_LOG_CONF_BAD_INDX BIT(12) /* Used by response */ - -#define ICE_AQC_FW_LOG_EN_S 12 -#define ICE_AQC_FW_LOG_EN_M (0xF << ICE_AQC_FW_LOG_EN_S) -#define ICE_AQC_FW_LOG_INFO_EN BIT(12) /* Used by command */ -#define ICE_AQC_FW_LOG_INIT_EN BIT(13) /* Used by command */ -#define ICE_AQC_FW_LOG_FLOW_EN BIT(14) /* Used by command */ -#define ICE_AQC_FW_LOG_ERR_EN BIT(15) /* Used by command */ -}; - - -/* Get/Clear FW Log (indirect 0xFF11) */ -struct ice_aqc_get_clear_fw_log { - u8 flags; -#define ICE_AQC_FW_LOG_CLEAR BIT(0) -#define ICE_AQC_FW_LOG_MORE_DATA_AVAIL BIT(1) - u8 rsvd1[7]; - __le32 addr_high; - __le32 addr_low; -}; - /** * struct ice_aq_desc - Admin Queue (AQ) descriptor @@ -2337,8 +2256,6 @@ struct ice_aq_desc { struct ice_aqc_get_vsi_resp get_vsi_resp; struct ice_aqc_download_pkg download_pkg; struct ice_aqc_get_pkg_info_list get_pkg_info_list; - struct ice_aqc_fw_logging fw_logging; - struct ice_aqc_get_clear_fw_log get_clear_fw_log; struct ice_aqc_set_mac_lb set_mac_lb; struct ice_aqc_alloc_free_res_cmd sw_res_ctrl; struct ice_aqc_get_res_alloc get_res; @@ -2558,11 +2475,6 @@ enum ice_adminq_opc { /* Standalone Commands/Events */ ice_aqc_opc_event_lan_overflow = 0x1001, - - /* debug commands */ - ice_aqc_opc_fw_logging = 0xFF09, - ice_aqc_opc_fw_logging_info = 0xFF10, - ice_aqc_opc_get_clear_fw_log = 0xFF11 }; #endif /* _ICE_ADMINQ_CMD_H_ */ diff --git a/drivers/net/ice/base/ice_common.c b/drivers/net/ice/base/ice_common.c index b4f0b964d..43c06948f 100644 --- a/drivers/net/ice/base/ice_common.c +++ b/drivers/net/ice/base/ice_common.c @@ -653,223 +653,6 @@ static void ice_cleanup_fltr_mgmt_struct(struct ice_hw *hw) ice_free(hw, sw); } -#define ICE_FW_LOG_DESC_SIZE(n) (sizeof(struct ice_aqc_fw_logging_data) + \ - (((n) - 1) * sizeof(((struct ice_aqc_fw_logging_data *)0)->entry))) -#define ICE_FW_LOG_DESC_SIZE_MAX \ - ICE_FW_LOG_DESC_SIZE(ICE_AQC_FW_LOG_ID_MAX) - -/** - * ice_get_fw_log_cfg - get FW logging configuration - * @hw: pointer to the HW struct - */ -static enum ice_status ice_get_fw_log_cfg(struct ice_hw *hw) -{ - struct ice_aqc_fw_logging_data *config; - struct ice_aq_desc desc; - enum ice_status status; - u16 size; - - size = ICE_FW_LOG_DESC_SIZE_MAX; - config = (struct ice_aqc_fw_logging_data *)ice_malloc(hw, size); - if (!config) - return ICE_ERR_NO_MEMORY; - - ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging_info); - - desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_BUF); - desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD); - - status = ice_aq_send_cmd(hw, &desc, config, size, NULL); - if (!status) { - u16 i; - - /* Save fw logging information into the HW structure */ - for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) { - u16 v, m, flgs; - - v = LE16_TO_CPU(config->entry[i]); - m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S; - flgs = (v & ICE_AQC_FW_LOG_EN_M) >> ICE_AQC_FW_LOG_EN_S; - - if (m < ICE_AQC_FW_LOG_ID_MAX) - hw->fw_log.evnts[m].cur = flgs; - } - } - - ice_free(hw, config); - - return status; -} - -/** - * ice_cfg_fw_log - configure FW logging - * @hw: pointer to the HW struct - * @enable: enable certain FW logging events if true, disable all if false - * - * This function enables/disables the FW logging via Rx CQ events and a UART - * port based on predetermined configurations. FW logging via the Rx CQ can be - * enabled/disabled for individual PF's. However, FW logging via the UART can - * only be enabled/disabled for all PFs on the same device. - * - * To enable overall FW logging, the "cq_en" and "uart_en" enable bits in - * hw->fw_log need to be set accordingly, e.g. based on user-provided input, - * before initializing the device. - * - * When re/configuring FW logging, callers need to update the "cfg" elements of - * the hw->fw_log.evnts array with the desired logging event configurations for - * modules of interest. When disabling FW logging completely, the callers can - * just pass false in the "enable" parameter. On completion, the function will - * update the "cur" element of the hw->fw_log.evnts array with the resulting - * logging event configurations of the modules that are being re/configured. FW - * logging modules that are not part of a reconfiguration operation retain their - * previous states. - * - * Before resetting the device, it is recommended that the driver disables FW - * logging before shutting down the control queue. When disabling FW logging - * ("enable" = false), the latest configurations of FW logging events stored in - * hw->fw_log.evnts[] are not overridden to allow them to be reconfigured after - * a device reset. - * - * When enabling FW logging to emit log messages via the Rx CQ during the - * device's initialization phase, a mechanism alternative to interrupt handlers - * needs to be used to extract FW log messages from the Rx CQ periodically and - * to prevent the Rx CQ from being full and stalling other types of control - * messages from FW to SW. Interrupts are typically disabled during the device's - * initialization phase. - */ -static enum ice_status ice_cfg_fw_log(struct ice_hw *hw, bool enable) -{ - struct ice_aqc_fw_logging_data *data = NULL; - struct ice_aqc_fw_logging *cmd; - enum ice_status status = ICE_SUCCESS; - u16 i, chgs = 0, len = 0; - struct ice_aq_desc desc; - u8 actv_evnts = 0; - void *buf = NULL; - - if (!hw->fw_log.cq_en && !hw->fw_log.uart_en) - return ICE_SUCCESS; - - /* Disable FW logging only when the control queue is still responsive */ - if (!enable && - (!hw->fw_log.actv_evnts || !ice_check_sq_alive(hw, &hw->adminq))) - return ICE_SUCCESS; - - /* Get current FW log settings */ - status = ice_get_fw_log_cfg(hw); - if (status) - return status; - - ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging); - cmd = &desc.params.fw_logging; - - /* Indicate which controls are valid */ - if (hw->fw_log.cq_en) - cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_AQ_VALID; - - if (hw->fw_log.uart_en) - cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_UART_VALID; - - if (enable) { - /* Fill in an array of entries with FW logging modules and - * logging events being reconfigured. - */ - for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) { - u16 val; - - /* Keep track of enabled event types */ - actv_evnts |= hw->fw_log.evnts[i].cfg; - - if (hw->fw_log.evnts[i].cfg == hw->fw_log.evnts[i].cur) - continue; - - if (!data) { - data = (struct ice_aqc_fw_logging_data *) - ice_malloc(hw, - ICE_FW_LOG_DESC_SIZE_MAX); - if (!data) - return ICE_ERR_NO_MEMORY; - } - - val = i << ICE_AQC_FW_LOG_ID_S; - val |= hw->fw_log.evnts[i].cfg << ICE_AQC_FW_LOG_EN_S; - data->entry[chgs++] = CPU_TO_LE16(val); - } - - /* Only enable FW logging if at least one module is specified. - * If FW logging is currently enabled but all modules are not - * enabled to emit log messages, disable FW logging altogether. - */ - if (actv_evnts) { - /* Leave if there is effectively no change */ - if (!chgs) - goto out; - - if (hw->fw_log.cq_en) - cmd->log_ctrl |= ICE_AQC_FW_LOG_AQ_EN; - - if (hw->fw_log.uart_en) - cmd->log_ctrl |= ICE_AQC_FW_LOG_UART_EN; - - buf = data; - len = ICE_FW_LOG_DESC_SIZE(chgs); - desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD); - } - } - - status = ice_aq_send_cmd(hw, &desc, buf, len, NULL); - if (!status) { - /* Update the current configuration to reflect events enabled. - * hw->fw_log.cq_en and hw->fw_log.uart_en indicate if the FW - * logging mode is enabled for the device. They do not reflect - * actual modules being enabled to emit log messages. So, their - * values remain unchanged even when all modules are disabled. - */ - u16 cnt = enable ? chgs : (u16)ICE_AQC_FW_LOG_ID_MAX; - - hw->fw_log.actv_evnts = actv_evnts; - for (i = 0; i < cnt; i++) { - u16 v, m; - - if (!enable) { - /* When disabling all FW logging events as part - * of device's de-initialization, the original - * configurations are retained, and can be used - * to reconfigure FW logging later if the device - * is re-initialized. - */ - hw->fw_log.evnts[i].cur = 0; - continue; - } - - v = LE16_TO_CPU(data->entry[i]); - m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S; - hw->fw_log.evnts[m].cur = hw->fw_log.evnts[m].cfg; - } - } - -out: - if (data) - ice_free(hw, data); - - return status; -} - -/** - * ice_output_fw_log - * @hw: pointer to the HW struct - * @desc: pointer to the AQ message descriptor - * @buf: pointer to the buffer accompanying the AQ message - * - * Formats a FW Log message and outputs it via the standard driver logs. - */ -void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf) -{ - ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg Start ]\n"); - ice_debug_array(hw, ICE_DBG_FW_LOG, 16, 1, (u8 *)buf, - LE16_TO_CPU(desc->datalen)); - ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg End ]\n"); -} /** * ice_get_itr_intrl_gran - determine int/intrl granularity @@ -979,10 +762,6 @@ enum ice_status ice_init_hw(struct ice_hw *hw) if (ice_get_fw_mode(hw) == ICE_FW_MODE_ROLLBACK) ice_print_rollback_msg(hw); - /* Enable FW logging. Not fatal if this fails. */ - status = ice_cfg_fw_log(hw, true); - if (status) - ice_debug(hw, ICE_DBG_INIT, "Failed to enable FW logging.\n"); status = ice_clear_pf_cfg(hw); if (status) @@ -1136,8 +915,6 @@ void ice_deinit_hw(struct ice_hw *hw) hw->port_info = NULL; } - /* Attempt to disable FW logging before shutting down control queues */ - ice_cfg_fw_log(hw, false); ice_destroy_all_ctrlq(hw); /* Clear VSI contexts if not already cleared */ diff --git a/drivers/net/ice/base/ice_common.h b/drivers/net/ice/base/ice_common.h index 4ecfa6b9b..4e44c2f13 100644 --- a/drivers/net/ice/base/ice_common.h +++ b/drivers/net/ice/base/ice_common.h @@ -194,7 +194,6 @@ enum ice_status ice_cfg_tc_node_bw_alloc(struct ice_port_info *pi, u8 tc, enum ice_rl_type rl_type, u8 bw_alloc); enum ice_status ice_cfg_rl_burst_size(struct ice_hw *hw, u32 bytes); -void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf); void ice_stat_update40(struct ice_hw *hw, u32 reg, bool prev_stat_loaded, u64 *prev_stat, u64 *cur_stat); diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h index d8cb8eecd..7194cb9ec 100644 --- a/drivers/net/ice/base/ice_type.h +++ b/drivers/net/ice/base/ice_type.h @@ -690,25 +690,6 @@ struct ice_switch_info { struct ice_sw_recipe *recp_list; }; -/* FW logging configuration */ -struct ice_fw_log_evnt { - u8 cfg : 4; /* New event enables to configure */ - u8 cur : 4; /* Current/active event enables */ -}; - -struct ice_fw_log_cfg { - u8 cq_en : 1; /* FW logging is enabled via the control queue */ - u8 uart_en : 1; /* FW logging is enabled via UART for all PFs */ - u8 actv_evnts; /* Cumulation of currently enabled log events */ - -#define ICE_FW_LOG_EVNT_INFO (ICE_AQC_FW_LOG_INFO_EN >> ICE_AQC_FW_LOG_EN_S) -#define ICE_FW_LOG_EVNT_INIT (ICE_AQC_FW_LOG_INIT_EN >> ICE_AQC_FW_LOG_EN_S) -#define ICE_FW_LOG_EVNT_FLOW (ICE_AQC_FW_LOG_FLOW_EN >> ICE_AQC_FW_LOG_EN_S) -#define ICE_FW_LOG_EVNT_ERR (ICE_AQC_FW_LOG_ERR_EN >> ICE_AQC_FW_LOG_EN_S) -#define ICE_FW_LOG_EVNT_ALL (ICE_FW_LOG_EVNT_INFO | ICE_FW_LOG_EVNT_INIT | \ - ICE_FW_LOG_EVNT_FLOW | ICE_FW_LOG_EVNT_ERR) - struct ice_fw_log_evnt evnts[ICE_AQC_FW_LOG_ID_MAX]; -}; /* Port hardware description */ struct ice_hw { @@ -767,7 +748,6 @@ struct ice_hw { u8 fw_patch; /* firmware patch version */ u32 fw_build; /* firmware build number */ - struct ice_fw_log_cfg fw_log; /* Device max aggregate bandwidths corresponding to the GL_PWR_MODE_CTL * register. Used for determining the itr/intrl granularity during -- 2.13.6