DPDK patches and discussions
 help / color / mirror / Atom feed
From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, ferruh.yigit@intel.com
Cc: thomas@monjalon.net, Gagandeep Singh <g.singh@nxp.com>
Subject: [dpdk-dev] [PATCH v3 11/14] net/ppfe: add MTU and MAC address set operations
Date: Tue,  1 Oct 2019 16:32:06 +0530	[thread overview]
Message-ID: <20191001110209.6047-12-g.singh@nxp.com> (raw)
In-Reply-To: <20191001110209.6047-1-g.singh@nxp.com>

To update MAC address or MTU, operations are
added to the driver.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
---
 doc/guides/nics/features/ppfe.ini |  1 +
 doc/guides/nics/ppfe.rst          |  1 +
 drivers/net/ppfe/ppfe_ethdev.c    | 63 +++++++++++++++++++++++++++++++
 3 files changed, 65 insertions(+)

diff --git a/doc/guides/nics/features/ppfe.ini b/doc/guides/nics/features/ppfe.ini
index 9184539c1..e0406a97f 100644
--- a/doc/guides/nics/features/ppfe.ini
+++ b/doc/guides/nics/features/ppfe.ini
@@ -8,6 +8,7 @@ L3 checksum offload  = Y
 L4 checksum offload  = Y
 Packet type parsing  = Y
 Basic stats          = Y
+MTU update           = Y
 Linux VFIO           = Y
 ARMv8                = Y
 Usage doc            = Y
diff --git a/doc/guides/nics/ppfe.rst b/doc/guides/nics/ppfe.rst
index a91585112..1ab0a5859 100644
--- a/doc/guides/nics/ppfe.rst
+++ b/doc/guides/nics/ppfe.rst
@@ -96,6 +96,7 @@ PPFE Features
 - L3/L4 checksum offload
 - Packet type parsing
 - Basic stats
+- MTU update
 - ARMv8
 
 Supported PPFE SoCs
diff --git a/drivers/net/ppfe/ppfe_ethdev.c b/drivers/net/ppfe/ppfe_ethdev.c
index bf40ee402..0097454c9 100644
--- a/drivers/net/ppfe/ppfe_ethdev.c
+++ b/drivers/net/ppfe/ppfe_ethdev.c
@@ -6,6 +6,7 @@
 #include <rte_kvargs.h>
 #include <rte_ethdev_vdev.h>
 #include <rte_bus_vdev.h>
+#include <rte_ether.h>
 #include <dpaa_of.h>
 
 #include "pfe_logs.h"
@@ -539,6 +540,59 @@ pfe_supported_ptypes_get(struct rte_eth_dev *dev)
 	return NULL;
 }
 
+static int
+pfe_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	int ret;
+	struct pfe_eth_priv_s *priv = dev->data->dev_private;
+	uint16_t frame_size = mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	/*TODO Support VLAN*/
+	ret = gemac_set_rx(priv->EMAC_baseaddr, frame_size);
+	if (!ret)
+		dev->data->mtu = mtu;
+
+	return ret;
+}
+
+/* pfe_eth_enet_addr_byte_mac
+ */
+static int
+pfe_eth_enet_addr_byte_mac(u8 *enet_byte_addr,
+			   struct pfe_mac_addr *enet_addr)
+{
+	if (!enet_byte_addr || !enet_addr) {
+		return -1;
+
+	} else {
+		enet_addr->bottom = enet_byte_addr[0] |
+			(enet_byte_addr[1] << 8) |
+			(enet_byte_addr[2] << 16) |
+			(enet_byte_addr[3] << 24);
+		enet_addr->top = enet_byte_addr[4] |
+			(enet_byte_addr[5] << 8);
+		return 0;
+	}
+}
+
+static int
+pfe_dev_set_mac_addr(struct rte_eth_dev *dev,
+		       struct rte_ether_addr *addr)
+{
+	struct pfe_eth_priv_s *priv = dev->data->dev_private;
+	struct pfe_mac_addr spec_addr;
+	int ret;
+
+	ret = pfe_eth_enet_addr_byte_mac(addr->addr_bytes, &spec_addr);
+	if (ret)
+		return ret;
+
+	gemac_set_laddrN(priv->EMAC_baseaddr,
+			 (struct pfe_mac_addr *)&spec_addr, 1);
+	rte_ether_addr_copy(addr, &dev->data->mac_addrs[0]);
+	return 0;
+}
+
 static int
 pfe_stats_get(struct rte_eth_dev *dev,
 	      struct rte_eth_stats *stats)
@@ -570,6 +624,8 @@ static const struct eth_dev_ops ops = {
 	.tx_queue_setup = pfe_tx_queue_setup,
 	.tx_queue_release  = pfe_tx_queue_release,
 	.dev_supported_ptypes_get = pfe_supported_ptypes_get,
+	.mtu_set              = pfe_mtu_set,
+	.mac_addr_set	      = pfe_dev_set_mac_addr,
 	.stats_get            = pfe_stats_get,
 };
 
@@ -580,6 +636,7 @@ pfe_eth_init(struct rte_vdev_device *vdev, struct pfe *pfe, int id)
 	struct pfe_eth_priv_s *priv = NULL;
 	struct ls1012a_eth_platform_data *einfo;
 	struct ls1012a_pfe_platform_data *pfe_info;
+	struct rte_ether_addr addr;
 	int err;
 
 	eth_dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
@@ -632,6 +689,12 @@ pfe_eth_init(struct rte_vdev_device *vdev, struct pfe *pfe, int id)
 		goto err0;
 	}
 
+	memcpy(addr.addr_bytes, priv->einfo->mac_addr,
+		       ETH_ALEN);
+
+	pfe_dev_set_mac_addr(eth_dev, &addr);
+	rte_ether_addr_copy(&addr, &eth_dev->data->mac_addrs[0]);
+
 	eth_dev->data->mtu = 1500;
 	eth_dev->dev_ops = &ops;
 	pfe_eth_stop(eth_dev);
-- 
2.17.1


  parent reply	other threads:[~2019-10-01 11:19 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-26 13:02 [dpdk-dev] [PATCH v1 00/13] introduces ppfe network PMD Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 01/13] common/dpaax: moving OF lib code from dpaa bus Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 02/13] net/ppfe: introduce ppfe net poll mode driver Gagandeep Singh
2019-10-28 17:18   ` Stephen Hemminger
2019-10-29  9:27     ` Ferruh Yigit
2019-11-04 11:06       ` Bruce Richardson
2019-11-05 16:02         ` Ferruh Yigit
2019-11-06  9:38           ` Bruce Richardson
2019-11-06 12:22             ` Ferruh Yigit
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 03/13] doc: add guide for ppfe net PMD Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 04/13] net/ppfe: support dynamic logging Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 05/13] net/ppfe: add HW specific macros and operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 06/13] net/ppfe: add MAC and host interface initialisation Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 07/13] net/ppfe: add device start stop operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 08/13] net/ppfe: add queue setup and release operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 09/13] net/ppfe: add burst enqueue and dequeue operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 10/13] net/ppfe: add supported packet types and basic statistics Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 11/13] net/ppfe: add MTU and MAC address set operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 12/13] net/ppfe: add allmulticast and promiscuous Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 13/13] net/ppfe: add link status update Gagandeep Singh
2019-08-27  7:16 ` [dpdk-dev] [PATCH v1 00/13] introduces ppfe network PMD Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 " Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 01/13] common/dpaax: moving OF lib code from dpaa bus Gagandeep Singh
2019-09-26 16:54     ` Ferruh Yigit
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 02/13] net/ppfe: introduce ppfe net poll mode driver Gagandeep Singh
2019-09-26 16:53     ` Ferruh Yigit
2019-10-01  7:05       ` Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 03/13] doc: add guide for ppfe net PMD Gagandeep Singh
2019-09-26 16:56     ` Ferruh Yigit
2019-09-26 18:00     ` Ferruh Yigit
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 04/13] net/ppfe: support dynamic logging Gagandeep Singh
2019-09-26 16:57     ` Ferruh Yigit
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 05/13] net/ppfe: add HW specific macros and operations Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 06/13] net/ppfe: add MAC and host interface initialisation Gagandeep Singh
2019-09-26 17:00     ` Ferruh Yigit
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 07/13] net/ppfe: add device start stop operations Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 08/13] net/ppfe: add queue setup and release operations Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 09/13] net/ppfe: add burst enqueue and dequeue operations Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 10/13] net/ppfe: add supported packet types and basic statistics Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 11/13] net/ppfe: add MTU and MAC address set operations Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 12/13] net/ppfe: add allmulticast and promiscuous Gagandeep Singh
2019-08-28 11:08   ` [dpdk-dev] [PATCH v2 13/13] net/ppfe: add link status update Gagandeep Singh
2019-09-26 17:28   ` [dpdk-dev] [PATCH v2 00/13] introduces ppfe network PMD Ferruh Yigit
2019-09-27 14:55     ` Gagandeep Singh
2019-10-01 11:01 ` [dpdk-dev] [PATCH v3 00/14] " Gagandeep Singh
2019-10-01 11:01   ` [dpdk-dev] [PATCH v3 01/14] common/dpaax: moving OF lib code from dpaa bus Gagandeep Singh
2019-10-01 11:01   ` [dpdk-dev] [PATCH v3 02/14] net/ppfe: introduce ppfe net poll mode driver Gagandeep Singh
2019-10-04 15:38     ` Ferruh Yigit
2019-10-09  6:52       ` Gagandeep Singh
2019-10-01 11:01   ` [dpdk-dev] [PATCH v3 03/14] doc: add guide for ppfe net PMD Gagandeep Singh
2019-10-04 15:41     ` Ferruh Yigit
2019-10-09  6:54       ` Gagandeep Singh
2019-10-01 11:01   ` [dpdk-dev] [PATCH v3 04/14] net/ppfe: support dynamic logging Gagandeep Singh
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 05/14] net/ppfe: add HW specific macros and operations Gagandeep Singh
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 06/14] net/ppfe: add MAC and host interface initialisation Gagandeep Singh
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 07/14] net/ppfe: add device start stop operations Gagandeep Singh
2019-10-04 15:42     ` Ferruh Yigit
2019-10-09  6:54       ` Gagandeep Singh
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 08/14] net/ppfe: add queue setup and release operations Gagandeep Singh
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 09/14] net/ppfe: add burst enqueue and dequeue operations Gagandeep Singh
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 10/14] net/ppfe: add supported packet types and basic statistics Gagandeep Singh
2019-10-01 11:02   ` Gagandeep Singh [this message]
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 12/14] net/ppfe: add allmulticast and promiscuous Gagandeep Singh
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 13/14] net/ppfe: add link status update Gagandeep Singh
2019-10-04 15:43     ` Ferruh Yigit
2019-10-09  6:57       ` Gagandeep Singh
2019-10-01 11:02   ` [dpdk-dev] [PATCH v3 14/14] doc: add NXP PPFE PMD in release notes Gagandeep Singh
2019-10-10  6:32   ` [dpdk-dev] [PATCH v4 00/14] introduces pfe network PMD Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 01/14] common/dpaax: moving OF lib code from dpaa bus Gagandeep Singh
2019-10-10 17:01       ` Ferruh Yigit
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 02/14] net/pfe: introduce pfe net poll mode driver Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 03/14] doc: add guide for pfe net PMD Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 04/14] net/pfe: support dynamic logging Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 05/14] net/pfe: add HW specific macros and operations Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 06/14] net/pfe: add MAC and host interface initialisation Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 07/14] net/pfe: add device start stop operations Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 08/14] net/pfe: add queue setup and release operations Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 09/14] net/pfe: add burst enqueue and dequeue operations Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 10/14] net/pfe: add supported packet types and basic statistics Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 11/14] net/pfe: add MTU and MAC address set operations Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 12/14] net/pfe: add allmulticast and promiscuous Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 13/14] net/pfe: add link status update Gagandeep Singh
2019-10-10  6:32     ` [dpdk-dev] [PATCH v4 14/14] doc: add NXP PFE PMD in release notes Gagandeep Singh
2019-10-10  7:11     ` [dpdk-dev] [PATCH v4 00/14] introduces pfe network PMD Thomas Monjalon
2019-10-10 17:01       ` Ferruh Yigit
2019-10-10 17:47     ` Ferruh Yigit
2019-10-25  7:59       ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191001110209.6047-12-g.singh@nxp.com \
    --to=g.singh@nxp.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).