DPDK patches and discussions
 help / color / mirror / Atom feed
From: Reshma Pattan <reshma.pattan@intel.com>
To: dev@dpdk.org
Cc: Reshma Pattan <reshma.pattan@intel.com>,
	stable@dpdk.org, Nikhil Rao <nikhil.rao@intel.com>,
	Chas Williams <chas3@att.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH v2] app/test: fix build when ring PMD is disabled
Date: Thu, 17 Oct 2019 12:16:28 +0100	[thread overview]
Message-ID: <20191017111628.5396-1-reshma.pattan@intel.com> (raw)
In-Reply-To: <20191017094124.16725-1-reshma.pattan@intel.com>

1)pdump, latency, bitrate, ring PMD and test_event_eth_tx_adapter
unit tests are dependent on ring PMD, so compile those
tests only when ring PMD is enabled else ignore.

2)get rid of make file error which was added by bond unit test
for ring PMD disabled case which is not necessary.

Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library")
Fixes: fdeb30fa71 ("test/bitrate: add unit tests for bitrate library")
Fixes: 1e3676a06e ("test/latency: add unit tests for latencystats library")
Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter")
Fixes: d23e09e0ef ("app/test: link with ring pmd when needed")

CC: stable@dpdk.org
CC: Nikhil Rao <nikhil.rao@intel.com>
CC: Chas Williams <chas3@att.com>
CC: Bruce Richardson <bruce.richardson@intel.com>
CC: Stephen Hemminger <stephen@networkplumber.org>

Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
---
v2: fix comments of v1 and combine the patches 1/2 and 2/2 of v1.
---
 app/test/Makefile    | 16 +++++-----------
 app/test/meson.build | 28 ++++++++++++++--------------
 app/test/process.h   |  8 ++++++++
 app/test/test.c      |  2 ++
 4 files changed, 29 insertions(+), 25 deletions(-)

diff --git a/app/test/Makefile b/app/test/Makefile
index df7f77f44..afbdb3854 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -144,8 +144,12 @@ SRCS-y += test_func_reentrancy.c
 
 SRCS-y += test_service_cores.c
 
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_RING),y)
+SRCS-y += sample_packet_forward.c
 SRCS-$(CONFIG_RTE_LIBRTE_BITRATE) += test_bitratestats.c
 SRCS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += test_latencystats.c
+SRCS-$(CONFIG_RTE_LIBRTE_PDUMP) += test_pdump.c
+endif
 
 SRCS-$(CONFIG_RTE_LIBRTE_CMDLINE) += test_cmdline.c
 SRCS-$(CONFIG_RTE_LIBRTE_CMDLINE) += test_cmdline_num.c
@@ -174,11 +178,8 @@ SRCS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += test_distributor_perf.c
 
 SRCS-$(CONFIG_RTE_LIBRTE_REORDER) += test_reorder.c
 
-SRCS-$(CONFIG_RTE_LIBRTE_PDUMP) += test_pdump.c
-
 SRCS-y += virtual_pmd.c
 SRCS-y += packet_burst_generator.c
-SRCS-y += sample_packet_forward.c
 SRCS-$(CONFIG_RTE_LIBRTE_ACL) += test_acl.c
 
 ifeq ($(CONFIG_RTE_LIBRTE_PMD_RING),y)
@@ -208,7 +209,7 @@ ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
 SRCS-y += test_eventdev.c
 SRCS-y += test_event_ring.c
 SRCS-y += test_event_eth_rx_adapter.c
-SRCS-y += test_event_eth_tx_adapter.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_RING) += test_event_eth_tx_adapter.c
 SRCS-y += test_event_timer_adapter.c
 SRCS-y += test_event_crypto_adapter.c
 endif
@@ -260,13 +261,6 @@ endif
 endif
 endif
 
-# Link against shared libraries when needed
-ifeq ($(CONFIG_RTE_LIBRTE_PMD_BOND),y)
-ifneq ($(CONFIG_RTE_LIBRTE_PMD_RING),y)
-$(error Link bonding tests require CONFIG_RTE_LIBRTE_PMD_RING=y)
-endif
-endif
-
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
 
 ifeq ($(CONFIG_RTE_LIBRTE_PMD_BOND),y)
diff --git a/app/test/meson.build b/app/test/meson.build
index 2c23c6347..e221e44f7 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -7,13 +7,11 @@ endif
 
 test_sources = files('commands.c',
 	'packet_burst_generator.c',
-	'sample_packet_forward.c',
 	'test.c',
 	'test_acl.c',
 	'test_alarm.c',
 	'test_atomic.c',
 	'test_barrier.c',
-	'test_bitratestats.c',
 	'test_bpf.c',
 	'test_byteorder.c',
 	'test_cmdline.c',
@@ -43,7 +41,6 @@ test_sources = files('commands.c',
 	'test_event_crypto_adapter.c',
 	'test_event_eth_rx_adapter.c',
 	'test_event_ring.c',
-	'test_event_eth_tx_adapter.c',
 	'test_event_timer_adapter.c',
 	'test_eventdev.c',
 	'test_external_mem.c',
@@ -60,9 +57,7 @@ test_sources = files('commands.c',
 	'test_ipsec.c',
 	'test_kni.c',
 	'test_kvargs.c',
-	'test_latencystats.c',
 	'test_link_bonding.c',
-	'test_link_bonding_mode4.c',
 	'test_link_bonding_rssconf.c',
 	'test_logs.c',
 	'test_lpm.c',
@@ -83,11 +78,8 @@ test_sources = files('commands.c',
 	'test_metrics.c',
 	'test_mcslock.c',
 	'test_mp_secondary.c',
-	'test_pdump.c',
 	'test_per_lcore.c',
 	'test_pmd_perf.c',
-	'test_pmd_ring.c',
-	'test_pmd_ring_perf.c',
 	'test_power.c',
 	'test_power_cpufreq.c',
 	'test_power_kvm_vm.c',
@@ -199,7 +191,6 @@ fast_test_names = [
         'rcu_qsbr_autotest',
         'red_autotest',
         'ring_autotest',
-        'ring_pmd_autotest',
         'rwlock_test1_autotest',
         'rwlock_rda_autotest',
         'rwlock_rds_wrm_autotest',
@@ -214,7 +205,6 @@ fast_test_names = [
         'timer_autotest',
         'user_delay_us',
         'version_autotest',
-        'bitratestats_autotest',
         'crc_autotest',
         'delay_us_sleep_autotest',
         'distributor_autotest',
@@ -225,10 +215,8 @@ fast_test_names = [
         'ipsec_autotest',
         'kni_autotest',
         'kvargs_autotest',
-        'latencystats_autotest',
         'member_autotest',
         'metrics_autotest',
-        'pdump_autotest',
         'power_cpufreq_autotest',
         'power_autotest',
         'power_kvm_vm_autotest',
@@ -258,7 +246,6 @@ perf_test_names = [
         'rcu_qsbr_perf_autotest',
         'red_perf',
         'distributor_perf_autotest',
-        'ring_pmd_perf_autotest',
         'pmd_perf_autotest',
         'stack_perf_autotest',
         'stack_lf_perf_autotest',
@@ -282,7 +269,6 @@ driver_test_names = [
         'eventdev_selftest_octeontx',
         'eventdev_selftest_sw',
         'link_bonding_autotest',
-        'link_bonding_mode4_autotest',
         'link_bonding_rssconf_autotest',
         'rawdev_autotest',
 ]
@@ -319,6 +305,20 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
 endif
 if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
 	test_deps += 'pmd_ring'
+	test_sources += 'test_pmd_ring_perf.c'
+	test_sources += 'test_pmd_ring.c'
+	test_sources += 'test_event_eth_tx_adapter.c'
+	test_sources += 'test_bitratestats.c'
+	test_sources += 'test_latencystats.c'
+	test_sources += 'test_link_bonding_mode4.c'
+	test_sources += 'sample_packet_forward.c'
+	test_sources += 'test_pdump.c'
+	fast_test_names += 'ring_pmd_autotest'
+	perf_test_names += 'ring_pmd_perf_autotest'
+	fast_test_names += 'bitratestats_autotest'
+	fast_test_names += 'latencystats_autotest'
+	fast_test_names += 'link_bonding_mode4_autotest'
+	fast_test_names += 'pdump_autotest'
 endif
 
 if dpdk_conf.has('RTE_LIBRTE_POWER')
diff --git a/app/test/process.h b/app/test/process.h
index 128ce4121..69c358e02 100644
--- a/app/test/process.h
+++ b/app/test/process.h
@@ -24,10 +24,12 @@
 #endif
 
 #ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIBRTE_RING_PMD
 #include <pthread.h>
 extern void *send_pkts(void *empty);
 extern uint16_t flag_for_send_pkts;
 #endif
+#endif
 
 /*
  * launches a second copy of the test process using the given argv parameters,
@@ -43,7 +45,9 @@ process_dup(const char *const argv[], int numargs, const char *env_value)
 	int i, fd, status;
 	char path[32];
 #ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIBRTE_RING_PMD
 	pthread_t thread;
+#endif
 #endif
 
 	pid_t pid = fork();
@@ -83,17 +87,21 @@ process_dup(const char *const argv[], int numargs, const char *env_value)
 	}
 	/* parent process does a wait */
 #ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIBRTE_RING_PMD
 	if ((strcmp(env_value, "run_pdump_server_tests") == 0))
 		pthread_create(&thread, NULL, &send_pkts, NULL);
+#endif
 #endif
 
 	while (wait(&status) != pid)
 		;
 #ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIBRTE_RING_PMD
 	if ((strcmp(env_value, "run_pdump_server_tests") == 0)) {
 		flag_for_send_pkts = 0;
 		pthread_join(thread, NULL);
 	}
+#endif
 #endif
 	return status;
 }
diff --git a/app/test/test.c b/app/test/test.c
index cd7aaf645..d0826ca69 100644
--- a/app/test/test.c
+++ b/app/test/test.c
@@ -53,7 +53,9 @@ do_recursive_call(void)
 	} actions[] =  {
 			{ "run_secondary_instances", test_mp_secondary },
 #ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIBRTE_RING_PMD
 			{ "run_pdump_server_tests", test_pdump },
+#endif
 #endif
 			{ "test_missing_c_flag", no_action },
 			{ "test_master_lcore_flag", no_action },
-- 
2.21.0


  parent reply	other threads:[~2019-10-17 11:16 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-17  9:41 [dpdk-dev] [PATCH 1/2] app/test: fix make " Reshma Pattan
2019-10-17  9:41 ` [dpdk-dev] [PATCH 2/2] app/test: fix meson " Reshma Pattan
2019-10-17  9:51   ` Bruce Richardson
2019-10-17  9:54   ` [dpdk-dev] [dpdk-stable] " David Marchand
2019-10-17  9:48 ` [dpdk-dev] [PATCH 1/2] app/test: fix make " Bruce Richardson
2019-10-17 11:16 ` Reshma Pattan [this message]
2019-10-17 13:46   ` [dpdk-dev] [PATCH v2] app/test: fix " Bruce Richardson
2019-10-25  8:11   ` David Marchand
2019-10-25 15:40     ` Pattan, Reshma
2019-10-25 15:38   ` [dpdk-dev] [PATCH v3] " Reshma Pattan
2019-10-27  8:47     ` [dpdk-dev] [dpdk-stable] " David Marchand
2019-10-29  9:36       ` Pattan, Reshma
2019-10-31  7:58         ` David Marchand
2019-10-31 10:18           ` Pattan, Reshma
2019-12-09 13:38           ` Pattan, Reshma
2019-12-09 16:54             ` Ferruh Yigit
2019-12-09 18:00               ` Aaron Conole
2019-12-18 11:58     ` [dpdk-dev] [PATCH v4] " Reshma Pattan
2019-12-18 16:07       ` Bruce Richardson
2019-12-18 16:23         ` Pattan, Reshma
2019-12-23  6:53       ` [dpdk-dev] [PATCH v5] " Reshma Pattan
2020-01-19 21:50         ` Thomas Monjalon
2020-01-20  9:55           ` Rao, Nikhil
2020-01-20 17:36         ` Bruce Richardson
2020-02-16 18:10           ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191017111628.5396-1-reshma.pattan@intel.com \
    --to=reshma.pattan@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=chas3@att.com \
    --cc=dev@dpdk.org \
    --cc=nikhil.rao@intel.com \
    --cc=stable@dpdk.org \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).